From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 14/35] block: Drop medium lock tracking, ask device models instead
Date: Mon, 12 Sep 2011 16:19:13 +0200 [thread overview]
Message-ID: <1315837174-15327-15-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1315837174-15327-1-git-send-email-kwolf@redhat.com>
From: Markus Armbruster <armbru@redhat.com>
Requires new BlockDevOps member is_medium_locked(). Implement for IDE
and SCSI CD-ROMs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 16 +++++++++-------
block.h | 7 ++++++-
block_int.h | 1 -
blockdev.c | 2 +-
hw/ide/core.c | 6 ++++++
hw/scsi-disk.c | 10 ++++++++++
6 files changed, 32 insertions(+), 10 deletions(-)
diff --git a/block.c b/block.c
index 7408fa9..1e4be73 100644
--- a/block.c
+++ b/block.c
@@ -818,6 +818,14 @@ static void bdrv_dev_resize_cb(BlockDriverState *bs)
}
}
+bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
+{
+ if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
+ return bs->dev_ops->is_medium_locked(bs->dev_opaque);
+ }
+ return false;
+}
+
/*
* Run consistency checks on an image
*
@@ -1890,7 +1898,7 @@ void bdrv_info(Monitor *mon, QObject **ret_data)
bs_obj = qobject_from_jsonf("{ 'device': %s, 'type': 'unknown', "
"'removable': %i, 'locked': %i }",
bs->device_name, bs->removable,
- bs->locked);
+ bdrv_dev_is_medium_locked(bs));
if (bs->drv) {
QObject *obj;
@@ -3060,11 +3068,6 @@ void bdrv_eject(BlockDriverState *bs, int eject_flag)
}
}
-int bdrv_is_locked(BlockDriverState *bs)
-{
- return bs->locked;
-}
-
/**
* Lock or unlock the media (if it is locked, the user won't be able
* to eject it manually).
@@ -3075,7 +3078,6 @@ void bdrv_set_locked(BlockDriverState *bs, int locked)
trace_bdrv_set_locked(bs, locked);
- bs->locked = locked;
if (drv && drv->bdrv_set_locked) {
drv->bdrv_set_locked(bs, locked);
}
diff --git a/block.h b/block.h
index 5d941e9..396ca0e 100644
--- a/block.h
+++ b/block.h
@@ -37,6 +37,11 @@ typedef struct BlockDevOps {
*/
void (*change_media_cb)(void *opaque);
/*
+ * Is the virtual medium locked into the device?
+ * Device models implement this only when device has such a lock.
+ */
+ bool (*is_medium_locked)(void *opaque);
+ /*
* Runs when the size changed (e.g. monitor command block_resize)
*/
void (*resize_cb)(void *opaque);
@@ -94,6 +99,7 @@ void bdrv_detach_dev(BlockDriverState *bs, void *dev);
void *bdrv_get_attached_dev(BlockDriverState *bs);
void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
void *opaque);
+bool bdrv_dev_is_medium_locked(BlockDriverState *bs);
int bdrv_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors);
int bdrv_write(BlockDriverState *bs, int64_t sector_num,
@@ -206,7 +212,6 @@ int bdrv_is_sg(BlockDriverState *bs);
int bdrv_enable_write_cache(BlockDriverState *bs);
int bdrv_is_inserted(BlockDriverState *bs);
int bdrv_media_changed(BlockDriverState *bs);
-int bdrv_is_locked(BlockDriverState *bs);
void bdrv_set_locked(BlockDriverState *bs, int locked);
void bdrv_eject(BlockDriverState *bs, int eject_flag);
void bdrv_get_format(BlockDriverState *bs, char *buf, int buf_size);
diff --git a/block_int.h b/block_int.h
index b63c57b..4f7ff3b 100644
--- a/block_int.h
+++ b/block_int.h
@@ -156,7 +156,6 @@ struct BlockDriverState {
int keep_read_only; /* if true, the media was requested to stay read only */
int open_flags; /* flags used to open the file, re-used for re-open */
int removable; /* if true, the media can be removed */
- int locked; /* if true, the media cannot temporarily be ejected */
int encrypted; /* if true, the media is encrypted */
int valid_key; /* if true, a valid encryption key has been set */
int sg; /* if true, the device is a /dev/sg* */
diff --git a/blockdev.c b/blockdev.c
index 049dda5..3f00b2e 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -640,7 +640,7 @@ static int eject_device(Monitor *mon, BlockDriverState *bs, int force)
qerror_report(QERR_DEVICE_NOT_REMOVABLE, bdrv_get_device_name(bs));
return -1;
}
- if (!force && bdrv_is_locked(bs)) {
+ if (!force && bdrv_dev_is_medium_locked(bs)) {
qerror_report(QERR_DEVICE_LOCKED, bdrv_get_device_name(bs));
return -1;
}
diff --git a/hw/ide/core.c b/hw/ide/core.c
index b33f84e..0403ad2 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -1795,8 +1795,14 @@ void ide_bus_reset(IDEBus *bus)
bus->dma->ops->reset(bus->dma);
}
+static bool ide_cd_is_medium_locked(void *opaque)
+{
+ return ((IDEState *)opaque)->tray_locked;
+}
+
static const BlockDevOps ide_cd_block_ops = {
.change_media_cb = ide_cd_change_cb,
+ .is_medium_locked = ide_cd_is_medium_locked,
};
int ide_init_drive(IDEState *s, BlockDriverState *bs, IDEDriveKind kind,
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 65783a7..42682d0 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1165,6 +1165,15 @@ static void scsi_destroy(SCSIDevice *dev)
blockdev_mark_auto_del(s->qdev.conf.bs);
}
+static bool scsi_cd_is_medium_locked(void *opaque)
+{
+ return ((SCSIDiskState *)opaque)->tray_locked;
+}
+
+static const BlockDevOps scsi_cd_block_ops = {
+ .is_medium_locked = scsi_cd_is_medium_locked,
+};
+
static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
@@ -1199,6 +1208,7 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
}
if (scsi_type == TYPE_ROM) {
+ bdrv_set_dev_ops(s->bs, &scsi_cd_block_ops, s);
s->qdev.blocksize = 2048;
} else if (scsi_type == TYPE_DISK) {
s->qdev.blocksize = s->qdev.conf.logical_block_size;
--
1.7.6
next prev parent reply other threads:[~2011-09-12 14:17 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-12 14:18 [Qemu-devel] [PULL 00/35] Block patches Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 01/35] qcow2: removed unused depends_on field Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 02/35] ide: Fix ATA command READ to set ATAPI signature for CD-ROM Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 03/35] ide: Use a table to declare which drive kinds accept each command Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 04/35] ide: Reject ATA commands specific to drive kinds Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 05/35] ide/atapi: Clean up misleading name in cmd_start_stop_unit() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 06/35] ide/atapi: Track tray open/close state Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 07/35] scsi-disk: Factor out scsi_disk_emulate_start_stop() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 08/35] scsi-disk: Track tray open/close state Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 09/35] block: Revert entanglement of bdrv_is_inserted() with tray status Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 10/35] block: Drop tray status tracking, no longer used Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 11/35] ide/atapi: Track tray locked state Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 12/35] scsi-disk: " Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 13/35] block: Leave enforcing tray lock to device models Kevin Wolf
2011-09-12 14:19 ` Kevin Wolf [this message]
2011-09-12 14:19 ` [Qemu-devel] [PATCH 15/35] block: Rename bdrv_set_locked() to bdrv_lock_medium() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 16/35] rbd: allow client id to be specified in config string Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 17/35] rbd: clean up, fix style Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 18/35] rbd: fix leak in qemu_rbd_open failure paths Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 19/35] ide/atapi: Don't fail eject when tray is already open Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 20/35] scsi-disk: Fix START_STOP to fail when it can't eject Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 21/35] ide/atapi: Preserve tray state on migration Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 22/35] block: Clean up remaining users of "removable" Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 23/35] block: Drop BlockDriverState member removable Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 24/35] block: Show whether the virtual tray is open in info block Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 25/35] block: Move BlockConf & friends from block_int.h to block.h Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 26/35] hw: Trim superfluous #include "block_int.h" Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 27/35] block: New bdrv_set_buffer_alignment() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 28/35] block: Reset buffer alignment on detach Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 29/35] nbd: Clean up use of block_int.h Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 30/35] block: New change_media_cb() parameter load Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 31/35] ide/atapi scsi-disk: Make monitor eject -f, then change work Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 32/35] qcow2: initialize metadata before inserting in cluster_allocs Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 33/35] ahci: Remove unused struct member Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 34/35] qcow2: align cluster_data to block to improve performance using O_DIRECT Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 35/35] qcow2: fix range check Kevin Wolf
2011-09-15 19:09 ` [Qemu-devel] [PULL 00/35] Block patches Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315837174-15327-15-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).