From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 09/35] atapi/scsi-disk: make mode page values coherent between the two
Date: Thu, 13 Oct 2011 13:03:39 +0200 [thread overview]
Message-ID: <1318503845-11473-10-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1318503845-11473-1-git-send-email-pbonzini@redhat.com>
This patch adds to scsi-disk the missing mode page 0x01 for both disk
and CD-ROM drives, and mode page 0x0e for CD drives only.
A few offsets were wrong in atapi.c. Also change the 2Ah mode page to
expose DVD media read capabilities in the IDE cdrom. This lets you run
dvd+rw-mediainfo on the virtual DVD drives.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/ide/atapi.c | 12 ++++++------
hw/scsi-disk.c | 33 ++++++++++++++++++++++++---------
2 files changed, 30 insertions(+), 15 deletions(-)
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 10f161f..c6eb8f0 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -751,7 +751,7 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[8] = 0x2a;
buf[9] = 0x12;
- buf[10] = 0x00;
+ buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
buf[11] = 0x00;
/* Claim PLAY_AUDIO capability (0x01) since some Linux
@@ -760,14 +760,14 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[13] = 3 << 5;
buf[14] = (1 << 0) | (1 << 3) | (1 << 5);
if (s->tray_locked) {
- buf[6] |= 1 << 1;
+ buf[14] |= 1 << 1;
}
- buf[15] = 0x00;
- cpu_to_ube16(&buf[16], 706);
+ buf[15] = 0x00; /* No volume & mute control, no changer */
+ cpu_to_ube16(&buf[16], 704); /* 4x read speed */
buf[18] = 0;
buf[19] = 2;
- cpu_to_ube16(&buf[20], 512);
- cpu_to_ube16(&buf[22], 706);
+ cpu_to_ube16(&buf[20], 512); /* 512k buffer */
+ cpu_to_ube16(&buf[22], 704); /* 4x read speed current */
buf[24] = 0;
buf[25] = 0;
buf[26] = 0;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index a4aadf2..837747f 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -607,6 +607,8 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
[MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK),
[MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
[MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
+ [MODE_PAGE_R_W_ERROR] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
+ [MODE_PAGE_AUDIO_CTL] = (1 << TYPE_ROM),
[MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM),
};
@@ -707,13 +709,26 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
}
break;
+ case MODE_PAGE_R_W_ERROR:
+ p[1] = 10;
+ p[2] = 0x80; /* Automatic Write Reallocation Enabled */
+ if (s->qdev.type == TYPE_ROM) {
+ p[3] = 0x20; /* Read Retry Count */
+ }
+ break;
+
+ case MODE_PAGE_AUDIO_CTL:
+ p[1] = 14;
+ break;
+
case MODE_PAGE_CAPABILITIES:
p[1] = 0x14;
if (page_control == 1) { /* Changeable Values */
break;
}
- p[2] = 3; // CD-R & CD-RW read
- p[3] = 0; // Writing not supported
+
+ p[2] = 0x3b; /* CD-R & CD-RW read */
+ p[3] = 0; /* Writing not supported */
p[4] = 0x7f; /* Audio, composite, digital out,
mode 2 form 1&2, multi session */
p[5] = 0xff; /* CD DA, DA accurate, RW supported,
@@ -723,17 +738,17 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
/* Locking supported, jumper present, eject, tray */
p[7] = 0; /* no volume & mute control, no
changer */
- p[8] = (50 * 176) >> 8; // 50x read speed
+ p[8] = (50 * 176) >> 8; /* 50x read speed */
p[9] = (50 * 176) & 0xff;
- p[10] = 0 >> 8; // No volume
- p[11] = 0 & 0xff;
- p[12] = 2048 >> 8; // 2M buffer
+ p[10] = 0 >> 8; /* Volume */
+ p[11] = 2 & 0xff;
+ p[12] = 2048 >> 8; /* 2M buffer */
p[13] = 2048 & 0xff;
- p[14] = (16 * 176) >> 8; // 16x read speed current
+ p[14] = (16 * 176) >> 8; /* 16x read speed current */
p[15] = (16 * 176) & 0xff;
- p[18] = (16 * 176) >> 8; // 16x write speed
+ p[18] = (16 * 176) >> 8; /* 16x write speed */
p[19] = (16 * 176) & 0xff;
- p[20] = (16 * 176) >> 8; // 16x write speed current
+ p[20] = (16 * 176) >> 8; /* 16x write speed current */
p[21] = (16 * 176) & 0xff;
break;
--
1.7.6
next prev parent reply other threads:[~2011-10-13 11:04 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-13 11:03 [Qemu-devel] [PULL 00/35] SCSI uber-patch Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 01/35] scsi: pass correct sense code for ENOMEDIUM Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 02/35] atapi/scsi: unify definitions for MMC Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 03/35] atapi: move GESN definitions to scsi-defs.h Paolo Bonzini
2011-10-17 13:41 ` Kevin Wolf
2011-10-17 13:53 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 04/35] atapi: fill in AUDIO_CTL page correctly Paolo Bonzini
2011-10-17 14:05 ` Kevin Wolf
2011-10-17 14:04 ` Paolo Bonzini
2011-10-17 14:10 ` Kevin Wolf
2011-10-17 14:22 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 05/35] scsi: notify the device when unit attention is reported Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 06/35] scsi-disk: report media changed via unit attention sense codes Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 07/35] scsi-disk: add stubs for more MMC commands Paolo Bonzini
2011-10-17 14:27 ` Kevin Wolf
2011-10-17 14:28 ` Paolo Bonzini
2011-10-17 14:44 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 08/35] scsi-disk: store valid mode pages in a table Paolo Bonzini
2011-10-13 11:03 ` Paolo Bonzini [this message]
2011-10-17 15:05 ` [Qemu-devel] [PATCH 09/35] atapi/scsi-disk: make mode page values coherent between the two Kevin Wolf
2011-10-17 15:06 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 10/35] scsi-disk: support DVD profile in GET CONFIGURATION Paolo Bonzini
2011-10-17 15:20 ` Kevin Wolf
2011-10-17 15:28 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 11/35] scsi-disk: support READ DVD STRUCTURE Paolo Bonzini
2011-10-21 11:42 ` Kevin Wolf
2011-10-21 13:11 ` Paolo Bonzini
2011-10-21 13:12 ` Paolo Bonzini
2011-10-21 13:32 ` Kevin Wolf
2011-10-21 13:36 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 12/35] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Paolo Bonzini
2011-10-21 11:54 ` Kevin Wolf
2011-10-21 13:08 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 13/35] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Paolo Bonzini
2011-10-21 12:01 ` Kevin Wolf
2011-10-21 12:21 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 14/35] qdev: switch children device list to QTAILQ Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 15/35] scsi: remove devs array from SCSIBus Paolo Bonzini
2011-10-21 12:31 ` Kevin Wolf
2011-10-21 13:03 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 16/35] scsi: implement REPORT LUNS for arbitrary LUNs Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 17/35] scsi: allow " Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 18/35] scsi: add channel to addressing Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 19/35] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 20/35] scsi-disk: do not complete requests twice Paolo Bonzini
2011-10-19 13:13 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 21/35] scsi-disk: bump SCSIRequest reference count until aio completion runs Paolo Bonzini
2011-10-17 15:37 ` [Qemu-devel] [PATCH v2 " Paolo Bonzini
2011-10-19 13:13 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 22/35] scsi-disk: fix retrying a flush Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 23/35] scsi-generic: drop SCSIGenericState Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 24/35] scsi-generic: remove scsi_req_fixup Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 25/35] scsi-generic: check ioctl statuses when SG_IO succeeds Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 26/35] scsi-generic: look at host status Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 27/35] scsi-generic: snoop READ CAPACITY commands to get block size Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 28/35] scsi-disk: do not duplicate BlockDriverState member Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 29/35] scsi-disk: remove cluster_size Paolo Bonzini
2011-10-24 15:10 ` Kevin Wolf
2011-10-24 15:36 ` Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 30/35] scsi-disk: small clean up to INQUIRY Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 31/35] scsi: move max_lba to SCSIDevice Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 32/35] scsi: make reqops static const Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 33/35] scsi: export scsi_generic_reqops Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 34/35] scsi: pass cdb to alloc_req Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 35/35] scsi-disk: add scsi-block for device passthrough Paolo Bonzini
2011-10-24 15:28 ` Kevin Wolf
2011-10-24 15:28 ` Paolo Bonzini
2011-10-24 15:38 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318503845-11473-10-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).