[Qemu-devel] [PATCH 19/35] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0

[Paolo Bonzini <pbonzini@redhat.com>]

Tested by the Windows Logo Kit SCSI Compliance test. From SBC-3, paragraph
5.25: "The LOGICAL BLOCK ADDRESS field shall be set to zero if the PMI
bit is set to zero. If the PMI bit is set to zero and the LOGICAL BLOCK
ADDRESS field is not set to zero, then the device server shall terminate
the command with CHECK CONDITION status with the sense key set to ILLEGAL
REQUEST and the additional sense code set to INVALID FIELD IN CDB".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi-disk.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 97a7335..b041fd5 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1161,8 +1161,12 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
         /* The normal LEN field for this command is zero.  */
         memset(outbuf, 0, 8);
         bdrv_get_geometry(s->bs, &nb_sectors);
-        if (!nb_sectors)
+        if (!nb_sectors) {
             goto not_ready;
+        }
+        if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
+            goto illegal_request;
+        }
         nb_sectors /= s->cluster_size;
         /* Returned value is the address of the last sector.  */
         nb_sectors--;
@@ -1207,8 +1211,12 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
             DPRINTF("SAI READ CAPACITY(16)\n");
             memset(outbuf, 0, req->cmd.xfer);
             bdrv_get_geometry(s->bs, &nb_sectors);
-            if (!nb_sectors)
+            if (!nb_sectors) {
                 goto not_ready;
+            }
+            if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
+                goto illegal_request;
+            }
             nb_sectors /= s->cluster_size;
             /* Returned value is the address of the last sector.  */
             nb_sectors--;
-- 
1.7.6