From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 07/35] scsi-disk: add stubs for more MMC commands
Date: Thu, 13 Oct 2011 13:03:37 +0200 [thread overview]
Message-ID: <1318503845-11473-8-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1318503845-11473-1-git-send-email-pbonzini@redhat.com>
This patch adds a few stub implementations for MMC commands to
scsi-disk, to be filled in later in the series. It also adds to
scsi-defs.h constants for commands implemented by ide/atapi.c,
when missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-defs.h | 3 ++
hw/scsi-disk.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++----
2 files changed, 61 insertions(+), 5 deletions(-)
diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index 8094698..030d4c2 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -113,6 +113,7 @@
#define READ_12 0xa8
#define WRITE_12 0xaa
#define SERVICE_ACTION_IN_12 0xab
+#define READ_DVD_STRUCTURE 0xad
#define WRITE_VERIFY_12 0xae
#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
@@ -122,6 +123,8 @@
#define SEND_VOLUME_TAG 0xb6
#define READ_DEFECT_DATA_12 0xb7
#define SET_CD_SPEED 0xbb
+#define MECHANISM_STATUS 0xbd
+#define READ_CD 0xbe
/*
* SERVICE ACTION IN subcodes
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 880cb22..95a6b77 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -563,6 +563,43 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
return buflen;
}
+static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
+ uint8_t *outbuf)
+{
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return -1;
+}
+
+static int scsi_get_event_status_notification(SCSIDiskState *s,
+ SCSIDiskReq *r, uint8_t *outbuf)
+{
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return -1;
+}
+
+static int scsi_get_configuration(SCSIDiskState *s, SCSIDiskReq *r,
+ uint8_t *outbuf)
+{
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ memset(outbuf, 0, 8);
+ /* ??? This should probably return much more information. For now
+ just return the basic header indicating the CD-ROM profile. */
+ outbuf[7] = 8; // CD-ROM
+ return 8;
+}
+
+static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
+{
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ memset(outbuf, 0, 8);
+ outbuf[5] = 1; // CD-ROM
+ return 8;
+}
+
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
int page_control)
{
@@ -947,12 +984,25 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
outbuf[7] = 0;
buflen = 8;
break;
+ case MECHANISM_STATUS:
+ buflen = scsi_emulate_mechanism_status(s, outbuf);
+ if (buflen < 0)
+ goto illegal_request;
+ break;
case GET_CONFIGURATION:
- memset(outbuf, 0, 8);
- /* ??? This should probably return much more information. For now
- just return the basic header indicating the CD-ROM profile. */
- outbuf[7] = 8; // CD-ROM
- buflen = 8;
+ buflen = scsi_get_configuration(s, r, outbuf);
+ if (buflen < 0)
+ goto illegal_request;
+ break;
+ case GET_EVENT_STATUS_NOTIFICATION:
+ buflen = scsi_get_event_status_notification(s, r, outbuf);
+ if (buflen < 0)
+ goto illegal_request;
+ break;
+ case READ_DVD_STRUCTURE:
+ buflen = scsi_read_dvd_structure(s, r, outbuf);
+ if (buflen < 0)
+ goto illegal_request;
break;
case SERVICE_ACTION_IN_16:
/* Service Action In subcommands. */
@@ -1055,7 +1105,10 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case ALLOW_MEDIUM_REMOVAL:
case READ_CAPACITY_10:
case READ_TOC:
+ case READ_DVD_STRUCTURE:
case GET_CONFIGURATION:
+ case GET_EVENT_STATUS_NOTIFICATION:
+ case MECHANISM_STATUS:
case SERVICE_ACTION_IN_16:
case VERIFY_10:
rc = scsi_disk_emulate_command(r);
--
1.7.6
next prev parent reply other threads:[~2011-10-13 11:04 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-13 11:03 [Qemu-devel] [PULL 00/35] SCSI uber-patch Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 01/35] scsi: pass correct sense code for ENOMEDIUM Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 02/35] atapi/scsi: unify definitions for MMC Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 03/35] atapi: move GESN definitions to scsi-defs.h Paolo Bonzini
2011-10-17 13:41 ` Kevin Wolf
2011-10-17 13:53 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 04/35] atapi: fill in AUDIO_CTL page correctly Paolo Bonzini
2011-10-17 14:05 ` Kevin Wolf
2011-10-17 14:04 ` Paolo Bonzini
2011-10-17 14:10 ` Kevin Wolf
2011-10-17 14:22 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 05/35] scsi: notify the device when unit attention is reported Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 06/35] scsi-disk: report media changed via unit attention sense codes Paolo Bonzini
2011-10-13 11:03 ` Paolo Bonzini [this message]
2011-10-17 14:27 ` [Qemu-devel] [PATCH 07/35] scsi-disk: add stubs for more MMC commands Kevin Wolf
2011-10-17 14:28 ` Paolo Bonzini
2011-10-17 14:44 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 08/35] scsi-disk: store valid mode pages in a table Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 09/35] atapi/scsi-disk: make mode page values coherent between the two Paolo Bonzini
2011-10-17 15:05 ` Kevin Wolf
2011-10-17 15:06 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 10/35] scsi-disk: support DVD profile in GET CONFIGURATION Paolo Bonzini
2011-10-17 15:20 ` Kevin Wolf
2011-10-17 15:28 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 11/35] scsi-disk: support READ DVD STRUCTURE Paolo Bonzini
2011-10-21 11:42 ` Kevin Wolf
2011-10-21 13:11 ` Paolo Bonzini
2011-10-21 13:12 ` Paolo Bonzini
2011-10-21 13:32 ` Kevin Wolf
2011-10-21 13:36 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 12/35] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Paolo Bonzini
2011-10-21 11:54 ` Kevin Wolf
2011-10-21 13:08 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 13/35] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Paolo Bonzini
2011-10-21 12:01 ` Kevin Wolf
2011-10-21 12:21 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 14/35] qdev: switch children device list to QTAILQ Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 15/35] scsi: remove devs array from SCSIBus Paolo Bonzini
2011-10-21 12:31 ` Kevin Wolf
2011-10-21 13:03 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 16/35] scsi: implement REPORT LUNS for arbitrary LUNs Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 17/35] scsi: allow " Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 18/35] scsi: add channel to addressing Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 19/35] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 20/35] scsi-disk: do not complete requests twice Paolo Bonzini
2011-10-19 13:13 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 21/35] scsi-disk: bump SCSIRequest reference count until aio completion runs Paolo Bonzini
2011-10-17 15:37 ` [Qemu-devel] [PATCH v2 " Paolo Bonzini
2011-10-19 13:13 ` Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 22/35] scsi-disk: fix retrying a flush Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 23/35] scsi-generic: drop SCSIGenericState Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 24/35] scsi-generic: remove scsi_req_fixup Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 25/35] scsi-generic: check ioctl statuses when SG_IO succeeds Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 26/35] scsi-generic: look at host status Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 27/35] scsi-generic: snoop READ CAPACITY commands to get block size Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 28/35] scsi-disk: do not duplicate BlockDriverState member Paolo Bonzini
2011-10-13 11:03 ` [Qemu-devel] [PATCH 29/35] scsi-disk: remove cluster_size Paolo Bonzini
2011-10-24 15:10 ` Kevin Wolf
2011-10-24 15:36 ` Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 30/35] scsi-disk: small clean up to INQUIRY Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 31/35] scsi: move max_lba to SCSIDevice Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 32/35] scsi: make reqops static const Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 33/35] scsi: export scsi_generic_reqops Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 34/35] scsi: pass cdb to alloc_req Paolo Bonzini
2011-10-13 11:04 ` [Qemu-devel] [PATCH 35/35] scsi-disk: add scsi-block for device passthrough Paolo Bonzini
2011-10-24 15:28 ` Kevin Wolf
2011-10-24 15:28 ` Paolo Bonzini
2011-10-24 15:38 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318503845-11473-8-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).