qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Pavel Borzenkov <pavel.borzenkov@gmail.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2] fw_cfg: Use g_file_get_contents instead of multiple fread() calls
Date: Mon, 24 Oct 2011 07:31:30 -0400	[thread overview]
Message-ID: <1319455890-20667-1-git-send-email-pavel.borzenkov@gmail.com> (raw)

Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
---
 hw/fw_cfg.c |  102 ++++++++++++++++++++++-------------------------------------
 1 files changed, 38 insertions(+), 64 deletions(-)

diff --git a/hw/fw_cfg.c b/hw/fw_cfg.c
index 8df265c..dbcb888 100644
--- a/hw/fw_cfg.c
+++ b/hw/fw_cfg.c
@@ -60,71 +60,55 @@ struct FWCfgState {
 #define JPG_FILE 0
 #define BMP_FILE 1
 
-static FILE *probe_splashfile(char *filename, int *file_sizep, int *file_typep)
+static char *read_splashfile(char *filename, int *file_sizep, int *file_typep)
 {
-    FILE *fp = NULL;
-    int fop_ret;
-    int file_size;
+    GError *err = NULL;
+    gboolean res;
+    gchar *content;
     int file_type = -1;
-    unsigned char buf[2] = {0, 0};
-    unsigned int filehead_value = 0;
+    unsigned int filehead = 0;
     int bmp_bpp;
 
-    fp = fopen(filename, "rb");
-    if (fp == NULL) {
-        error_report("failed to open file '%s'.", filename);
-        return fp;
+    res = g_file_get_contents(filename, &content, (gsize *)file_sizep, &err);
+    if (res == FALSE) {
+        error_report("failed to read splash file '%s'", filename);
+        g_error_free(err);
+        return NULL;
     }
+
     /* check file size */
-    fseek(fp, 0L, SEEK_END);
-    file_size = ftell(fp);
-    if (file_size < 2) {
-        error_report("file size is less than 2 bytes '%s'.", filename);
-        fclose(fp);
-        fp = NULL;
-        return fp;
+    if (*file_sizep < 30) {
+        goto error;
     }
+
     /* check magic ID */
-    fseek(fp, 0L, SEEK_SET);
-    fop_ret = fread(buf, 1, 2, fp);
-    if (fop_ret != 2) {
-        error_report("Could not read header from '%s': %s",
-                     filename, strerror(errno));
-        fclose(fp);
-        fp = NULL;
-        return fp;
-    }
-    filehead_value = (buf[0] + (buf[1] << 8)) & 0xffff;
-    if (filehead_value == 0xd8ff) {
+    filehead = ((content[0] & 0xff) + (content[1] << 8)) & 0xffff;
+    if (filehead == 0xd8ff) {
         file_type = JPG_FILE;
+    } else if (filehead == 0x4d42) {
+        file_type = BMP_FILE;
     } else {
-        if (filehead_value == 0x4d42) {
-            file_type = BMP_FILE;
-        }
-    }
-    if (file_type < 0) {
-        error_report("'%s' not jpg/bmp file,head:0x%x.",
-                         filename, filehead_value);
-        fclose(fp);
-        fp = NULL;
-        return fp;
+        goto error;
     }
+
     /* check BMP bpp */
     if (file_type == BMP_FILE) {
-        fseek(fp, 28, SEEK_SET);
-        fop_ret = fread(buf, 1, 2, fp);
-        bmp_bpp = (buf[0] + (buf[1] << 8)) & 0xffff;
+        bmp_bpp = (content[28] + (content[29] << 8)) & 0xffff;
         if (bmp_bpp != 24) {
-            error_report("only 24bpp bmp file is supported.");
-            fclose(fp);
-            fp = NULL;
-            return fp;
+            goto error;
         }
     }
+
     /* return values */
-    *file_sizep = file_size;
     *file_typep = file_type;
-    return fp;
+
+    return content;
+
+error:
+    error_report("splash file '%s' format not recognized; must be JPEG "
+                 "or 24 bit BMP", filename);
+    g_free(content);
+    return NULL;
 }
 
 static void fw_cfg_bootsplash(FWCfgState *s)
@@ -132,9 +116,7 @@ static void fw_cfg_bootsplash(FWCfgState *s)
     int boot_splash_time = -1;
     const char *boot_splash_filename = NULL;
     char *p;
-    char *filename;
-    FILE *fp;
-    int fop_ret;
+    char *filename, *file_data;
     int file_size;
     int file_type = -1;
     const char *temp;
@@ -174,27 +156,19 @@ static void fw_cfg_bootsplash(FWCfgState *s)
             error_report("failed to find file '%s'.", boot_splash_filename);
             return;
         }
-        /* probing the file */
-        fp = probe_splashfile(filename, &file_size, &file_type);
-        if (fp == NULL) {
+
+        /* loading file data */
+        file_data = read_splashfile(filename, &file_size, &file_type);
+        if (file_data == NULL) {
             g_free(filename);
             return;
         }
-        /* loading file data */
         if (boot_splash_filedata != NULL) {
             g_free(boot_splash_filedata);
         }
-        boot_splash_filedata = g_malloc(file_size);
+        boot_splash_filedata = (uint8_t *)file_data;
         boot_splash_filedata_size = file_size;
-        fseek(fp, 0L, SEEK_SET);
-        fop_ret = fread(boot_splash_filedata, 1, file_size, fp);
-        if (fop_ret != file_size) {
-            error_report("failed to read data from '%s'.",
-                         boot_splash_filename);
-            fclose(fp);
-            return;
-        }
-        fclose(fp);
+
         /* insert data */
         if (file_type == JPG_FILE) {
             fw_cfg_add_file(s, "bootsplash.jpg",
-- 
1.7.0.4

             reply	other threads:[~2011-10-24 11:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-24 11:31 Pavel Borzenkov [this message]
2011-10-27 10:12 ` [Qemu-devel] [PATCH v2] fw_cfg: Use g_file_get_contents instead of multiple fread() calls Pavel Borzenkov
2011-10-27 11:49 ` Peter Maydell
2011-11-01 18:03 ` Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1319455890-20667-1-git-send-email-pavel.borzenkov@gmail.com \
    --to=pavel.borzenkov@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).