* [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2
@ 2011-10-25 10:40 Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 01/33] scsi: pass correct sense code for ENOMEDIUM Paolo Bonzini
` (33 more replies)
0 siblings, 34 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Kevin,
The following changes since commit 952e849c150b4f1b89f8728cba00f925c1d6e75b:
Merge remote-tracking branch 'bonzini/split-main-loop-for-anthony' into staging (2011-10-24 10:51:12 -0500)
are available in the git repository at:
git://github.com/bonzini/qemu.git scsi-for-kevin
All comments from you have been addressed. I'll send separately patches
that require a new review.
v1->v2:
- rebased
- various fixes noted in individual patches
- dropped patches 20, 21, 35
- added a separate patch to fix preexisting coding style issues
Paolo Bonzini (33):
scsi: pass correct sense code for ENOMEDIUM
atapi/scsi: unify definitions for MMC
atapi: move GESN definitions to scsi-defs.h
atapi: cleanup/fix mode sense results
scsi: notify the device when unit attention is reported
scsi-disk: report media changed via unit attention sense codes
scsi-disk: fix coding style issues (braces)
scsi-disk: add stubs for more MMC commands
scsi-disk: store valid mode pages in a table
atapi/scsi-disk: make mode page values coherent between the two
scsi-disk: support DVD profile in GET CONFIGURATION
scsi-disk: support READ DVD STRUCTURE
scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION
scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo)
qdev: switch children device list to QTAILQ
scsi: remove devs array from SCSIBus
scsi: implement REPORT LUNS for arbitrary LUNs
scsi: allow arbitrary LUNs
scsi: add channel to addressing
scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0
scsi-disk: fix retrying a flush
scsi-generic: drop SCSIGenericState
scsi-generic: remove scsi_req_fixup
scsi-generic: check ioctl statuses when SG_IO succeeds
scsi-generic: look at host status
scsi-generic: snoop READ CAPACITY commands to get block size
scsi-disk: do not duplicate BlockDriverState member
scsi-disk: remove cluster_size
scsi-disk: small clean up to INQUIRY
scsi: move max_lba to SCSIDevice
scsi: make reqops const
scsi: export scsi_generic_reqops
scsi: pass cdb to alloc_req
hw/acpi_piix4.c | 4 +-
hw/esp.c | 16 +-
hw/i2c.c | 2 +-
hw/ide/atapi.c | 119 ++++------
hw/ide/core.c | 4 +-
hw/ide/internal.h | 71 +------
hw/ide/macio.c | 2 +-
hw/intel-hda.c | 6 +-
hw/lsi53c895a.c | 30 +--
hw/qdev.c | 24 +-
hw/qdev.h | 4 +-
hw/s390-virtio-bus.c | 4 +-
hw/scsi-bus.c | 204 ++++++++++++-----
hw/scsi-defs.h | 90 ++++++++
hw/scsi-disk.c | 604 +++++++++++++++++++++++++++++++++++++-------------
hw/scsi-generic.c | 154 +++++++-------
hw/scsi.h | 33 ++-
hw/spapr_vio.c | 6 +-
hw/spapr_vscsi.c | 54 ++++-
hw/ssi.c | 6 +-
hw/usb-msd.c | 8 +-
21 files changed, 931 insertions(+), 514 deletions(-)
--
1.7.6
^ permalink raw reply [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 01/33] scsi: pass correct sense code for ENOMEDIUM
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 02/33] atapi/scsi: unify definitions for MMC Paolo Bonzini
` (32 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 6909578..9c62569 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -231,6 +231,9 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
bdrv_iostatus_set_err(s->bs, error);
} else {
switch (error) {
+ case ENOMEDIUM:
+ scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+ break;
case ENOMEM:
scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
break;
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 02/33] atapi/scsi: unify definitions for MMC
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 01/33] scsi: pass correct sense code for ENOMEDIUM Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 03/33] atapi: move GESN definitions to scsi-defs.h Paolo Bonzini
` (31 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
The definitions in ide/internal.h are duplicates, since ATAPI commands
actually come from SCSI. Use the ones in scsi-defs.h and move the
missing ones there. Two exceptions:
- MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry"
page in scsi-disk.c. It is unused, so pick the latter.
- GPCMD_* is left in ide/internal.h, at least for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/ide/atapi.c | 52 +++++++++++++++++++-------------------
hw/ide/core.c | 4 +-
hw/ide/internal.h | 71 +----------------------------------------------------
hw/ide/macio.c | 2 +-
hw/scsi-bus.c | 2 +-
hw/scsi-defs.h | 66 +++++++++++++++++++++++++++++++++++++++++++++++++
hw/scsi-disk.c | 8 +++---
7 files changed, 101 insertions(+), 104 deletions(-)
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 3f909c3..be3b728 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -154,10 +154,10 @@ void ide_atapi_io_error(IDEState *s, int ret)
{
/* XXX: handle more errors */
if (ret == -ENOMEDIUM) {
- ide_atapi_cmd_error(s, SENSE_NOT_READY,
+ ide_atapi_cmd_error(s, NOT_READY,
ASC_MEDIUM_NOT_PRESENT);
} else {
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_LOGICAL_BLOCK_OOR);
}
}
@@ -282,7 +282,7 @@ static void ide_atapi_cmd_check_status(IDEState *s)
#ifdef DEBUG_IDE_ATAPI
printf("atapi_cmd_check_status\n");
#endif
- s->error = MC_ERR | (SENSE_UNIT_ATTENTION << 4);
+ s->error = MC_ERR | (UNIT_ATTENTION << 4);
s->status = ERR_STAT;
s->nsector = 0;
ide_set_irq(s->bus);
@@ -354,7 +354,7 @@ static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
ide_atapi_cmd_read_dma_cb, s);
if (!s->bus->dma->aiocb) {
/* Note: media not present is the most likely case */
- ide_atapi_cmd_error(s, SENSE_NOT_READY,
+ ide_atapi_cmd_error(s, NOT_READY,
ASC_MEDIUM_NOT_PRESENT);
goto eot;
}
@@ -595,7 +595,7 @@ static void cmd_get_event_status_notification(IDEState *s,
/* It is fine by the MMC spec to not support async mode operations */
if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */
/* Only polling is supported, asynchronous mode is not. */
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_INV_FIELD_IN_CMD_PACKET);
return;
}
@@ -643,8 +643,8 @@ static void cmd_request_sense(IDEState *s, uint8_t *buf)
buf[7] = 10;
buf[12] = s->asc;
- if (s->sense_key == SENSE_UNIT_ATTENTION) {
- s->sense_key = SENSE_NONE;
+ if (s->sense_key == UNIT_ATTENTION) {
+ s->sense_key = NO_SENSE;
}
ide_atapi_cmd_reply(s, 18, max_len);
@@ -676,7 +676,7 @@ static void cmd_get_configuration(IDEState *s, uint8_t *buf)
/* only feature 0 is supported */
if (buf[2] != 0 || buf[3] != 0) {
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_INV_FIELD_IN_CMD_PACKET);
return;
}
@@ -733,7 +733,7 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
switch(action) {
case 0: /* current values */
switch(code) {
- case GPMODE_R_W_ERROR_PAGE: /* error recovery */
+ case MODE_PAGE_R_W_ERROR: /* error recovery */
cpu_to_ube16(&buf[0], 16 + 6);
buf[2] = 0x70;
buf[3] = 0;
@@ -752,7 +752,7 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[15] = 0x00;
ide_atapi_cmd_reply(s, 16, max_len);
break;
- case GPMODE_AUDIO_CTL_PAGE:
+ case MODE_PAGE_AUDIO_CTL:
cpu_to_ube16(&buf[0], 24 + 6);
buf[2] = 0x70;
buf[3] = 0;
@@ -769,7 +769,7 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
ide_atapi_cmd_reply(s, 24, max_len);
break;
- case GPMODE_CAPABILITIES_PAGE:
+ case MODE_PAGE_CAPABILITIES:
cpu_to_ube16(&buf[0], 28 + 6);
buf[2] = 0x70;
buf[3] = 0;
@@ -813,14 +813,14 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
goto error_cmd;
default:
case 3: /* saved values */
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_SAVING_PARAMETERS_NOT_SUPPORTED);
break;
}
return;
error_cmd:
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET);
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET);
}
static void cmd_test_unit_ready(IDEState *s, uint8_t *buf)
@@ -883,7 +883,7 @@ static void cmd_read_cd(IDEState *s, uint8_t* buf)
ide_atapi_cmd_read(s, lba, nb_sectors, 2352);
break;
default:
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_INV_FIELD_IN_CMD_PACKET);
break;
}
@@ -896,7 +896,7 @@ static void cmd_seek(IDEState *s, uint8_t* buf)
lba = ube32_to_cpu(buf + 2);
if (lba >= total_sectors) {
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
return;
}
@@ -912,7 +912,7 @@ static void cmd_start_stop_unit(IDEState *s, uint8_t* buf)
if (loej) {
if (!start && !s->tray_open && s->tray_locked) {
sense = bdrv_is_inserted(s->bs)
- ? SENSE_NOT_READY : SENSE_ILLEGAL_REQUEST;
+ ? NOT_READY : ILLEGAL_REQUEST;
ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED);
return;
}
@@ -971,7 +971,7 @@ static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf)
break;
default:
error_cmd:
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_INV_FIELD_IN_CMD_PACKET);
}
}
@@ -997,11 +997,11 @@ static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
if (format < 0xff) {
if (media_is_cd(s)) {
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_INCOMPATIBLE_FORMAT);
return;
} else if (!media_present(s)) {
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_INV_FIELD_IN_CMD_PACKET);
return;
}
@@ -1017,7 +1017,7 @@ static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
ret = ide_dvd_read_structure(s, format, buf, buf);
if (ret < 0) {
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, -ret);
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret);
} else {
ide_atapi_cmd_reply(s, ret, max_len);
}
@@ -1034,7 +1034,7 @@ static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
case 0x90: /* TODO: List of recognized format layers */
case 0xc0: /* TODO: Write protection status */
default:
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
ASC_INV_FIELD_IN_CMD_PACKET);
break;
}
@@ -1106,7 +1106,7 @@ void ide_atapi_cmd(IDEState *s)
* condition response unless a higher priority status, defined by the drive
* here, is pending.
*/
- if (s->sense_key == SENSE_UNIT_ATTENTION &&
+ if (s->sense_key == UNIT_ATTENTION &&
!(atapi_cmd_table[s->io_buffer[0]].flags & ALLOW_UA)) {
ide_atapi_cmd_check_status(s);
return;
@@ -1119,10 +1119,10 @@ void ide_atapi_cmd(IDEState *s)
* states rely on this behavior.
*/
if (!s->tray_open && bdrv_is_inserted(s->bs) && s->cdrom_changed) {
- ide_atapi_cmd_error(s, SENSE_NOT_READY, ASC_MEDIUM_NOT_PRESENT);
+ ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
s->cdrom_changed = 0;
- s->sense_key = SENSE_UNIT_ATTENTION;
+ s->sense_key = UNIT_ATTENTION;
s->asc = ASC_MEDIUM_MAY_HAVE_CHANGED;
return;
}
@@ -1131,7 +1131,7 @@ void ide_atapi_cmd(IDEState *s)
if ((atapi_cmd_table[s->io_buffer[0]].flags & CHECK_READY) &&
(!media_present(s) || !bdrv_is_inserted(s->bs)))
{
- ide_atapi_cmd_error(s, SENSE_NOT_READY, ASC_MEDIUM_NOT_PRESENT);
+ ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
return;
}
@@ -1141,5 +1141,5 @@ void ide_atapi_cmd(IDEState *s)
return;
}
- ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE);
+ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE);
}
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 280a117..1f366e7 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -799,7 +799,7 @@ static void ide_cd_change_cb(void *opaque, bool load)
* First indicate to the guest that a CD has been removed. That's
* done on the next command the guest sends us.
*
- * Then we set SENSE_UNIT_ATTENTION, by which the guest will
+ * Then we set UNIT_ATTENTION, by which the guest will
* detect a new CD in the drive. See ide_atapi_cmd() for details.
*/
s->cdrom_changed = 1;
@@ -2027,7 +2027,7 @@ static int ide_drive_post_load(void *opaque, int version_id)
IDEState *s = opaque;
if (version_id < 3) {
- if (s->sense_key == SENSE_UNIT_ATTENTION &&
+ if (s->sense_key == UNIT_ATTENTION &&
s->asc == ASC_MEDIUM_MAY_HAVE_CHANGED) {
s->cdrom_changed = 1;
}
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index c39dc05..00b28df 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -11,6 +11,7 @@
#include "iorange.h"
#include "dma.h"
#include "sysemu.h"
+#include "hw/scsi-defs.h"
/* debug IDE devices */
//#define DEBUG_IDE
@@ -280,71 +281,6 @@ typedef struct IDEDMAOps IDEDMAOps;
#define GPCMD_GET_MEDIA_STATUS 0xda
#define GPCMD_MODE_SENSE_6 0x1a
-/* Mode page codes for mode sense/set */
-#define GPMODE_R_W_ERROR_PAGE 0x01
-#define GPMODE_WRITE_PARMS_PAGE 0x05
-#define GPMODE_AUDIO_CTL_PAGE 0x0e
-#define GPMODE_POWER_PAGE 0x1a
-#define GPMODE_FAULT_FAIL_PAGE 0x1c
-#define GPMODE_TO_PROTECT_PAGE 0x1d
-#define GPMODE_CAPABILITIES_PAGE 0x2a
-#define GPMODE_ALL_PAGES 0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE 0x0d
-
-/*
- * Based on values from <linux/cdrom.h> but extending CD_MINS
- * to the maximum common size allowed by the Orange's Book ATIP
- *
- * 90 and 99 min CDs are also available but using them as the
- * upper limit reduces the effectiveness of the heuristic to
- * detect DVDs burned to less than 25% of their maximum capacity
- */
-
-/* Some generally useful CD-ROM information */
-#define CD_MINS 80 /* max. minutes per CD */
-#define CD_SECS 60 /* seconds per minute */
-#define CD_FRAMES 75 /* frames per second */
-#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
-#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
-#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
-
-/*
- * The MMC values are not IDE specific and might need to be moved
- * to a common header if they are also needed for the SCSI emulation
- */
-
-/* Profile list from MMC-6 revision 1 table 91 */
-#define MMC_PROFILE_NONE 0x0000
-#define MMC_PROFILE_CD_ROM 0x0008
-#define MMC_PROFILE_CD_R 0x0009
-#define MMC_PROFILE_CD_RW 0x000A
-#define MMC_PROFILE_DVD_ROM 0x0010
-#define MMC_PROFILE_DVD_R_SR 0x0011
-#define MMC_PROFILE_DVD_RAM 0x0012
-#define MMC_PROFILE_DVD_RW_RO 0x0013
-#define MMC_PROFILE_DVD_RW_SR 0x0014
-#define MMC_PROFILE_DVD_R_DL_SR 0x0015
-#define MMC_PROFILE_DVD_R_DL_JR 0x0016
-#define MMC_PROFILE_DVD_RW_DL 0x0017
-#define MMC_PROFILE_DVD_DDR 0x0018
-#define MMC_PROFILE_DVD_PLUS_RW 0x001A
-#define MMC_PROFILE_DVD_PLUS_R 0x001B
-#define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
-#define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
-#define MMC_PROFILE_BD_ROM 0x0040
-#define MMC_PROFILE_BD_R_SRM 0x0041
-#define MMC_PROFILE_BD_R_RRM 0x0042
-#define MMC_PROFILE_BD_RE 0x0043
-#define MMC_PROFILE_HDDVD_ROM 0x0050
-#define MMC_PROFILE_HDDVD_R 0x0051
-#define MMC_PROFILE_HDDVD_RAM 0x0052
-#define MMC_PROFILE_HDDVD_RW 0x0053
-#define MMC_PROFILE_HDDVD_R_DL 0x0058
-#define MMC_PROFILE_HDDVD_RW_DL 0x005A
-#define MMC_PROFILE_INVALID 0xFFFF
-
#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
#define ATAPI_INT_REASON_REL 0x04
@@ -366,11 +302,6 @@ typedef struct IDEDMAOps IDEDMAOps;
#define CFA_INVALID_ADDRESS 0x21
#define CFA_ADDRESS_OVERFLOW 0x2f
-#define SENSE_NONE 0
-#define SENSE_NOT_READY 2
-#define SENSE_ILLEGAL_REQUEST 5
-#define SENSE_UNIT_ATTENTION 6
-
#define SMART_READ_DATA 0xd0
#define SMART_READ_THRESH 0xd1
#define SMART_ATTR_AUTOSAVE 0xd2
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index 37b8239..70b3342 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -87,7 +87,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
if (!m->aiocb) {
qemu_sglist_destroy(&s->sg);
/* Note: media not present is the most likely case */
- ide_atapi_cmd_error(s, SENSE_NOT_READY,
+ ide_atapi_cmd_error(s, NOT_READY,
ASC_MEDIUM_NOT_PRESENT);
goto done;
}
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index aca65a1..fc2f823 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -800,7 +800,7 @@ const struct SCSISense sense_code_SAVING_PARAMS_NOT_SUPPORTED = {
};
/* Illegal request, Incompatible medium installed */
-const struct SCSISense sense_code_INCOMPATIBLE_MEDIUM = {
+const struct SCSISense sense_code_INCOMPATIBLE_FORMAT = {
.key = ILLEGAL_REQUEST, .asc = 0x30, .ascq = 0x00
};
diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index bfe9392..6bb4df7 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -188,3 +188,69 @@
#define TYPE_INACTIVE 0x20
#define TYPE_NO_LUN 0x7f
+/* Mode page codes for mode sense/set */
+#define MODE_PAGE_R_W_ERROR 0x01
+#define MODE_PAGE_HD_GEOMETRY 0x04
+#define MODE_PAGE_FLEXIBLE_DISK_GEOMETRY 0x05
+#define MODE_PAGE_CACHING 0x08
+#define MODE_PAGE_AUDIO_CTL 0x0e
+#define MODE_PAGE_POWER 0x1a
+#define MODE_PAGE_FAULT_FAIL 0x1c
+#define MODE_PAGE_TO_PROTECT 0x1d
+#define MODE_PAGE_CAPABILITIES 0x2a
+#define MODE_PAGE_ALLS 0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
+ * of MODE_PAGE_SENSE_POWER */
+#define MODE_PAGE_CDROM 0x0d
+
+/*
+ * Based on values from <linux/cdrom.h> but extending CD_MINS
+ * to the maximum common size allowed by the Orange's Book ATIP
+ *
+ * 90 and 99 min CDs are also available but using them as the
+ * upper limit reduces the effectiveness of the heuristic to
+ * detect DVDs burned to less than 25% of their maximum capacity
+ */
+
+/* Some generally useful CD-ROM information */
+#define CD_MINS 80 /* max. minutes per CD */
+#define CD_SECS 60 /* seconds per minute */
+#define CD_FRAMES 75 /* frames per second */
+#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
+#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
+#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
+
+/*
+ * The MMC values are not IDE specific and might need to be moved
+ * to a common header if they are also needed for the SCSI emulation
+ */
+
+/* Profile list from MMC-6 revision 1 table 91 */
+#define MMC_PROFILE_NONE 0x0000
+#define MMC_PROFILE_CD_ROM 0x0008
+#define MMC_PROFILE_CD_R 0x0009
+#define MMC_PROFILE_CD_RW 0x000A
+#define MMC_PROFILE_DVD_ROM 0x0010
+#define MMC_PROFILE_DVD_R_SR 0x0011
+#define MMC_PROFILE_DVD_RAM 0x0012
+#define MMC_PROFILE_DVD_RW_RO 0x0013
+#define MMC_PROFILE_DVD_RW_SR 0x0014
+#define MMC_PROFILE_DVD_R_DL_SR 0x0015
+#define MMC_PROFILE_DVD_R_DL_JR 0x0016
+#define MMC_PROFILE_DVD_RW_DL 0x0017
+#define MMC_PROFILE_DVD_DDR 0x0018
+#define MMC_PROFILE_DVD_PLUS_RW 0x001A
+#define MMC_PROFILE_DVD_PLUS_R 0x001B
+#define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
+#define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
+#define MMC_PROFILE_BD_ROM 0x0040
+#define MMC_PROFILE_BD_R_SRM 0x0041
+#define MMC_PROFILE_BD_R_RRM 0x0042
+#define MMC_PROFILE_BD_RE 0x0043
+#define MMC_PROFILE_HDDVD_ROM 0x0050
+#define MMC_PROFILE_HDDVD_R 0x0051
+#define MMC_PROFILE_HDDVD_RAM 0x0052
+#define MMC_PROFILE_HDDVD_RW 0x0053
+#define MMC_PROFILE_HDDVD_R_DL 0x0058
+#define MMC_PROFILE_HDDVD_RW_DL 0x005A
+#define MMC_PROFILE_INVALID 0xFFFF
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 9c62569..a6ef060 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -576,7 +576,7 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
* The buffer was already menset to zero by the caller of this function.
*/
switch (page) {
- case 4: /* Rigid disk device geometry page. */
+ case MODE_PAGE_HD_GEOMETRY:
if (s->qdev.type == TYPE_ROM) {
return -1;
}
@@ -611,7 +611,7 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
p[21] = 5400 & 0xff;
break;
- case 5: /* Flexible disk device geometry page. */
+ case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
if (s->qdev.type == TYPE_ROM) {
return -1;
}
@@ -653,7 +653,7 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
p[29] = 5400 & 0xff;
break;
- case 8: /* Caching page. */
+ case MODE_PAGE_CACHING:
p[0] = 8;
p[1] = 0x12;
if (page_control == 1) { /* Changeable Values */
@@ -664,7 +664,7 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
}
break;
- case 0x2a: /* CD Capabilities and Mechanical Status page. */
+ case MODE_PAGE_CAPABILITIES:
if (s->qdev.type != TYPE_ROM) {
return -1;
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 03/33] atapi: move GESN definitions to scsi-defs.h
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 01/33] scsi: pass correct sense code for ENOMEDIUM Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 02/33] atapi/scsi: unify definitions for MMC Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 04/33] atapi: cleanup/fix mode sense results Paolo Bonzini
` (30 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
As a complement to the previous patch, move definitions for GET EVENT
STATUS NOTIFICATION from the two functions to scsi-defs.h.
The NCR_* constants are just bit values corresponding to the ENC_*
values, with no offsets even, so keep just one copy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: coding style (tabs)
hw/ide/atapi.c | 43 ++++++-------------------------------------
hw/scsi-defs.h | 21 +++++++++++++++++++++
2 files changed, 27 insertions(+), 37 deletions(-)
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index be3b728..347c38d 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -505,19 +505,6 @@ static int ide_dvd_read_structure(IDEState *s, int format,
static unsigned int event_status_media(IDEState *s,
uint8_t *buf)
{
- enum media_event_code {
- MEC_NO_CHANGE = 0, /* Status unchanged */
- MEC_EJECT_REQUESTED, /* received a request from user to eject */
- MEC_NEW_MEDIA, /* new media inserted and ready for access */
- MEC_MEDIA_REMOVAL, /* only for media changers */
- MEC_MEDIA_CHANGED, /* only for media changers */
- MEC_BG_FORMAT_COMPLETED, /* MRW or DVD+RW b/g format completed */
- MEC_BG_FORMAT_RESTARTED, /* MRW or DVD+RW b/g format restarted */
- };
- enum media_status {
- MS_TRAY_OPEN = 1,
- MS_MEDIA_PRESENT = 2,
- };
uint8_t event_code, media_status;
media_status = 0;
@@ -564,27 +551,6 @@ static void cmd_get_event_status_notification(IDEState *s,
uint8_t notification_class;
uint8_t supported_events;
} QEMU_PACKED *gesn_event_header;
-
- enum notification_class_request_type {
- NCR_RESERVED1 = 1 << 0,
- NCR_OPERATIONAL_CHANGE = 1 << 1,
- NCR_POWER_MANAGEMENT = 1 << 2,
- NCR_EXTERNAL_REQUEST = 1 << 3,
- NCR_MEDIA = 1 << 4,
- NCR_MULTI_HOST = 1 << 5,
- NCR_DEVICE_BUSY = 1 << 6,
- NCR_RESERVED2 = 1 << 7,
- };
- enum event_notification_class_field {
- ENC_NO_EVENTS = 0,
- ENC_OPERATIONAL_CHANGE,
- ENC_POWER_MANAGEMENT,
- ENC_EXTERNAL_REQUEST,
- ENC_MEDIA,
- ENC_MULTIPLE_HOSTS,
- ENC_DEVICE_BUSY,
- ENC_RESERVED,
- };
unsigned int max_len, used_len;
gesn_cdb = (void *)packet;
@@ -606,8 +572,11 @@ static void cmd_get_event_status_notification(IDEState *s,
* These are the supported events.
*
* We currently only support requests of the 'media' type.
+ * Notification class requests and supported event classes are bitmasks,
+ * but they are build from the same values as the "notification class"
+ * field.
*/
- gesn_event_header->supported_events = NCR_MEDIA;
+ gesn_event_header->supported_events = 1 << GESN_MEDIA;
/*
* We use |= below to set the class field; other bits in this byte
@@ -621,8 +590,8 @@ static void cmd_get_event_status_notification(IDEState *s,
* notification_class_request_type enum above specifies the
* priority: upper elements are higher prio than lower ones.
*/
- if (gesn_cdb->class & NCR_MEDIA) {
- gesn_event_header->notification_class |= ENC_MEDIA;
+ if (gesn_cdb->class & (1 << GESN_MEDIA)) {
+ gesn_event_header->notification_class |= GESN_MEDIA;
used_len = event_status_media(s, buf);
} else {
gesn_event_header->notification_class = 0x80; /* No event available */
diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index 6bb4df7..5e6c9b7 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -203,6 +203,27 @@
* of MODE_PAGE_SENSE_POWER */
#define MODE_PAGE_CDROM 0x0d
+/* Event notification classes for GET EVENT STATUS NOTIFICATION */
+#define GESN_NO_EVENTS 0
+#define GESN_OPERATIONAL_CHANGE 1
+#define GESN_POWER_MANAGEMENT 2
+#define GESN_EXTERNAL_REQUEST 3
+#define GESN_MEDIA 4
+#define GESN_MULTIPLE_HOSTS 5
+#define GESN_DEVICE_BUSY 6
+
+/* Event codes for MEDIA event status notification */
+#define MEC_NO_CHANGE 0
+#define MEC_EJECT_REQUESTED 1
+#define MEC_NEW_MEDIA 2
+#define MEC_MEDIA_REMOVAL 3 /* only for media changers */
+#define MEC_MEDIA_CHANGED 4 /* only for media changers */
+#define MEC_BG_FORMAT_COMPLETED 5 /* MRW or DVD+RW b/g format completed */
+#define MEC_BG_FORMAT_RESTARTED 6 /* MRW or DVD+RW b/g format restarted */
+
+#define MS_TRAY_OPEN 1
+#define MS_MEDIA_PRESENT 2
+
/*
* Based on values from <linux/cdrom.h> but extending CD_MINS
* to the maximum common size allowed by the Orange's Book ATIP
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 04/33] atapi: cleanup/fix mode sense results
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (2 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 03/33] atapi: move GESN definitions to scsi-defs.h Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 05/33] scsi: notify the device when unit attention is reported Paolo Bonzini
` (29 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
The first two bytes (after the 8-byte ATAPI header) are the mode page
number and the number of bytes after the length field itself. Make
this clear in the code.
The AUDIO_CTL page was filled with wrong values. It is not anymore in
MMC, but at least keep the values sane.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/ide/atapi.c | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 347c38d..e898da2 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -711,8 +711,8 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[6] = 0;
buf[7] = 0;
- buf[8] = 0x01;
- buf[9] = 0x06;
+ buf[8] = MODE_PAGE_R_W_ERROR;
+ buf[9] = 16 - 10;
buf[10] = 0x00;
buf[11] = 0x05;
buf[12] = 0x00;
@@ -730,6 +730,8 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[6] = 0;
buf[7] = 0;
+ buf[8] = MODE_PAGE_AUDIO_CTL;
+ buf[9] = 24 - 10;
/* Fill with CDROM audio volume */
buf[17] = 0;
buf[19] = 0;
@@ -747,8 +749,8 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[6] = 0;
buf[7] = 0;
- buf[8] = 0x2a;
- buf[9] = 0x12;
+ buf[8] = MODE_PAGE_CAPABILITIES;
+ buf[9] = 28 - 10;
buf[10] = 0x00;
buf[11] = 0x00;
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 05/33] scsi: notify the device when unit attention is reported
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (3 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 04/33] atapi: cleanup/fix mode sense results Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 06/33] scsi-disk: report media changed via unit attention sense codes Paolo Bonzini
` (28 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Reporting media change events via unit attention sense codes requires
a small state machine: first report "NO MEDIUM", then report "MEDIUM MAY
HAVE CHANGED". Unfortunately there is no good hooking point for the
device to notice that its pending unit attention condition has been
reported. This patch reworks the generic machinery to add one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-bus.c | 32 +++++++++++++++++++++++++++-----
hw/scsi.h | 2 ++
2 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index fc2f823..c190509 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -295,6 +295,13 @@ static int32_t scsi_target_send_command(SCSIRequest *req, uint8_t *buf)
r->len = scsi_device_get_sense(r->req.dev, r->buf,
MIN(req->cmd.xfer, sizeof r->buf),
(req->cmd.buf[1] & 1) == 0);
+ if (r->req.dev->sense_is_ua) {
+ if (r->req.dev->info->unit_attention_reported) {
+ r->req.dev->info->unit_attention_reported(req->dev);
+ }
+ r->req.dev->sense_len = 0;
+ r->req.dev->sense_is_ua = false;
+ }
break;
default:
scsi_req_build_sense(req, SENSE_CODE(LUN_NOT_SUPPORTED));
@@ -383,7 +390,13 @@ SCSIRequest *scsi_req_new(SCSIDevice *d, uint32_t tag, uint32_t lun,
(buf[0] != INQUIRY &&
buf[0] != REPORT_LUNS &&
buf[0] != GET_CONFIGURATION &&
- buf[0] != GET_EVENT_STATUS_NOTIFICATION)) {
+ buf[0] != GET_EVENT_STATUS_NOTIFICATION &&
+
+ /*
+ * If we already have a pending unit attention condition,
+ * report this one before triggering another one.
+ */
+ !(buf[0] == REQUEST_SENSE && d->sense_is_ua))) {
req = scsi_req_alloc(&reqops_unit_attention, d, tag, lun,
hba_private);
} else if (lun != d->lun ||
@@ -479,10 +492,15 @@ int scsi_req_get_sense(SCSIRequest *req, uint8_t *buf, int len)
*
* We assume UA_INTLCK_CTRL to be 00b for HBAs that support autosense, and
* 10b for HBAs that do not support it (do not call scsi_req_get_sense).
- * In the latter case, scsi_req_complete clears unit attention conditions
- * after moving them to the device's sense buffer.
+ * Here we handle unit attention clearing for UA_INTLCK_CTRL == 00b.
*/
- scsi_clear_unit_attention(req);
+ if (req->dev->sense_is_ua) {
+ if (req->dev->info->unit_attention_reported) {
+ req->dev->info->unit_attention_reported(req->dev);
+ }
+ req->dev->sense_len = 0;
+ req->dev->sense_is_ua = false;
+ }
return ret;
}
@@ -1082,8 +1100,12 @@ void scsi_req_complete(SCSIRequest *req, int status)
if (req->sense_len) {
memcpy(req->dev->sense, req->sense, req->sense_len);
+ req->dev->sense_len = req->sense_len;
+ req->dev->sense_is_ua = (req->ops == &reqops_unit_attention);
+ } else {
+ req->dev->sense_len = 0;
+ req->dev->sense_is_ua = false;
}
- req->dev->sense_len = req->sense_len;
/*
* Unit attention state is now stored in the device's sense buffer
diff --git a/hw/scsi.h b/hw/scsi.h
index e8dcabf..6d40b8e 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -62,6 +62,7 @@ struct SCSIDevice
BlockConf conf;
SCSIDeviceInfo *info;
SCSISense unit_attention;
+ bool sense_is_ua;
uint8_t sense[SCSI_SENSE_BUF_SIZE];
uint32_t sense_len;
QTAILQ_HEAD(, SCSIRequest) requests;
@@ -92,6 +93,7 @@ struct SCSIDeviceInfo {
void (*destroy)(SCSIDevice *s);
SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
void *hba_private);
+ void (*unit_attention_reported)(SCSIDevice *s);
SCSIReqOps reqops;
};
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 06/33] scsi-disk: report media changed via unit attention sense codes
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (4 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 05/33] scsi: notify the device when unit attention is reported Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 07/33] scsi-disk: fix coding style issues (braces) Paolo Bonzini
` (27 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Building on the previous patch, this one adds a media change callback
to scsi-disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-bus.c | 5 +++++
hw/scsi-disk.c | 29 ++++++++++++++++++++++++++++-
hw/scsi.h | 2 ++
3 files changed, 35 insertions(+), 1 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index c190509..867b1a8 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -847,6 +847,11 @@ const struct SCSISense sense_code_RESET = {
.key = UNIT_ATTENTION, .asc = 0x29, .ascq = 0x00
};
+/* Unit attention, No medium */
+const struct SCSISense sense_code_UNIT_ATTENTION_NO_MEDIUM = {
+ .key = UNIT_ATTENTION, .asc = 0x3a, .ascq = 0x00
+};
+
/* Unit attention, Medium may have changed */
const struct SCSISense sense_code_MEDIUM_CHANGED = {
.key = UNIT_ATTENTION, .asc = 0x28, .ascq = 0x00
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index a6ef060..880cb22 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -71,6 +71,7 @@ struct SCSIDiskState
int cluster_size;
uint32_t removable;
uint64_t max_lba;
+ bool media_changed;
QEMUBH *bh;
char *version;
char *serial;
@@ -1198,7 +1199,21 @@ static void scsi_destroy(SCSIDevice *dev)
static void scsi_cd_change_media_cb(void *opaque, bool load)
{
- ((SCSIDiskState *)opaque)->tray_open = !load;
+ SCSIDiskState *s = opaque;
+
+ /*
+ * When a CD gets changed, we have to report an ejected state and
+ * then a loaded state to guests so that they detect tray
+ * open/close and media change events. Guests that do not use
+ * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
+ * states rely on this behavior.
+ *
+ * media_changed governs the state machine used for unit attention
+ * report. media_event is used by GET EVENT STATUS NOTIFICATION.
+ */
+ s->media_changed = load;
+ s->tray_open = !load;
+ s->qdev.unit_attention = SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM);
}
static bool scsi_cd_is_tray_open(void *opaque)
@@ -1217,6 +1232,15 @@ static const BlockDevOps scsi_cd_block_ops = {
.is_medium_locked = scsi_cd_is_medium_locked,
};
+static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
+ if (s->media_changed) {
+ s->media_changed = false;
+ s->qdev.unit_attention = SENSE_CODE(MEDIUM_CHANGED);
+ }
+}
+
static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
@@ -1329,6 +1353,7 @@ static SCSIDeviceInfo scsi_disk_info[] = {
.init = scsi_hd_initfn,
.destroy = scsi_destroy,
.alloc_req = scsi_new_request,
+ .unit_attention_reported = scsi_disk_unit_attention_reported,
.qdev.props = (Property[]) {
DEFINE_SCSI_DISK_PROPERTIES(),
DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
@@ -1343,6 +1368,7 @@ static SCSIDeviceInfo scsi_disk_info[] = {
.init = scsi_cd_initfn,
.destroy = scsi_destroy,
.alloc_req = scsi_new_request,
+ .unit_attention_reported = scsi_disk_unit_attention_reported,
.qdev.props = (Property[]) {
DEFINE_SCSI_DISK_PROPERTIES(),
DEFINE_PROP_END_OF_LIST(),
@@ -1356,6 +1382,7 @@ static SCSIDeviceInfo scsi_disk_info[] = {
.init = scsi_disk_initfn,
.destroy = scsi_destroy,
.alloc_req = scsi_new_request,
+ .unit_attention_reported = scsi_disk_unit_attention_reported,
.qdev.props = (Property[]) {
DEFINE_SCSI_DISK_PROPERTIES(),
DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
diff --git a/hw/scsi.h b/hw/scsi.h
index 6d40b8e..7004aaa 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -161,6 +161,8 @@ extern const struct SCSISense sense_code_IO_ERROR;
extern const struct SCSISense sense_code_I_T_NEXUS_LOSS;
/* Command aborted, Logical Unit failure */
extern const struct SCSISense sense_code_LUN_FAILURE;
+/* LUN not ready, Medium not present */
+extern const struct SCSISense sense_code_UNIT_ATTENTION_NO_MEDIUM;
/* Unit attention, Power on, reset or bus device reset occurred */
extern const struct SCSISense sense_code_RESET;
/* Unit attention, Medium may have changed*/
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 07/33] scsi-disk: fix coding style issues (braces)
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (5 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 06/33] scsi-disk: report media changed via unit attention sense codes Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 08/33] scsi-disk: add stubs for more MMC commands Paolo Bonzini
` (26 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: new patch
hw/scsi-disk.c | 71 ++++++++++++++++++++++++++++++++++++-------------------
1 files changed, 46 insertions(+), 25 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 880cb22..3a08848 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -350,9 +350,9 @@ static void scsi_dma_restart_cb(void *opaque, int running, RunState state)
{
SCSIDiskState *s = opaque;
- if (!running)
+ if (!running) {
return;
-
+ }
if (!s->bh) {
s->bh = qemu_bh_new(scsi_dma_restart_bh, s);
qemu_bh_schedule(s->bh);
@@ -403,8 +403,9 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
"buffer size %zd\n", req->cmd.xfer);
pages = buflen++;
outbuf[buflen++] = 0x00; // list of supported pages (this page)
- if (s->serial)
+ if (s->serial) {
outbuf[buflen++] = 0x80; // unit serial number
+ }
outbuf[buflen++] = 0x83; // device identification
if (s->qdev.type == TYPE_DISK) {
outbuf[buflen++] = 0xb0; // block limits
@@ -423,10 +424,12 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
}
l = strlen(s->serial);
- if (l > req->cmd.xfer)
+ if (l > req->cmd.xfer) {
l = req->cmd.xfer;
- if (l > 20)
+ }
+ if (l > 20) {
l = 20;
+ }
DPRINTF("Inquiry EVPD[Serial number] "
"buffer size %zd\n", req->cmd.xfer);
@@ -441,8 +444,9 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
int max_len = 255 - 8;
int id_len = strlen(bdrv_get_device_name(s->bs));
- if (id_len > max_len)
+ if (id_len > max_len) {
id_len = max_len;
+ }
DPRINTF("Inquiry EVPD[Device identification] "
"buffer size %zd\n", req->cmd.xfer);
@@ -525,9 +529,9 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
}
buflen = req->cmd.xfer;
- if (buflen > SCSI_MAX_INQUIRY_LEN)
+ if (buflen > SCSI_MAX_INQUIRY_LEN) {
buflen = SCSI_MAX_INQUIRY_LEN;
-
+ }
memset(outbuf, 0, buflen);
outbuf[0] = s->qdev.type & 0x1f;
@@ -749,8 +753,9 @@ static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
outbuf[7] = 8; /* Block descriptor length */
}
nb_sectors /= s->cluster_size;
- if (nb_sectors > 0xffffff)
+ if (nb_sectors > 0xffffff) {
nb_sectors = 0;
+ }
p[0] = 0; /* media density code */
p[1] = (nb_sectors >> 16) & 0xff;
p[2] = (nb_sectors >> 8) & 0xff;
@@ -791,8 +796,9 @@ static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
outbuf[0] = ((buflen - 2) >> 8) & 0xff;
outbuf[1] = (buflen - 2) & 0xff;
}
- if (buflen > r->req.cmd.xfer)
+ if (buflen > r->req.cmd.xfer) {
buflen = r->req.cmd.xfer;
+ }
return buflen;
}
@@ -826,8 +832,9 @@ static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
default:
return -1;
}
- if (toclen > req->cmd.xfer)
+ if (toclen > req->cmd.xfer) {
toclen = req->cmd.xfer;
+ }
return toclen;
}
@@ -879,40 +886,48 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
outbuf = r->iov.iov_base;
switch (req->cmd.buf[0]) {
case TEST_UNIT_READY:
- if (s->tray_open || !bdrv_is_inserted(s->bs))
+ if (s->tray_open || !bdrv_is_inserted(s->bs)) {
goto not_ready;
+ }
break;
case INQUIRY:
buflen = scsi_disk_emulate_inquiry(req, outbuf);
- if (buflen < 0)
+ if (buflen < 0) {
goto illegal_request;
+ }
break;
case MODE_SENSE:
case MODE_SENSE_10:
buflen = scsi_disk_emulate_mode_sense(r, outbuf);
- if (buflen < 0)
+ if (buflen < 0) {
goto illegal_request;
+ }
break;
case READ_TOC:
buflen = scsi_disk_emulate_read_toc(req, outbuf);
- if (buflen < 0)
+ if (buflen < 0) {
goto illegal_request;
+ }
break;
case RESERVE:
- if (req->cmd.buf[1] & 1)
+ if (req->cmd.buf[1] & 1) {
goto illegal_request;
+ }
break;
case RESERVE_10:
- if (req->cmd.buf[1] & 3)
+ if (req->cmd.buf[1] & 3) {
goto illegal_request;
+ }
break;
case RELEASE:
- if (req->cmd.buf[1] & 1)
+ if (req->cmd.buf[1] & 1) {
goto illegal_request;
+ }
break;
case RELEASE_10:
- if (req->cmd.buf[1] & 3)
+ if (req->cmd.buf[1] & 3) {
goto illegal_request;
+ }
break;
case START_STOP:
if (scsi_disk_emulate_start_stop(r) < 0) {
@@ -927,16 +942,18 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
/* The normal LEN field for this command is zero. */
memset(outbuf, 0, 8);
bdrv_get_geometry(s->bs, &nb_sectors);
- if (!nb_sectors)
+ if (!nb_sectors) {
goto not_ready;
+ }
nb_sectors /= s->cluster_size;
/* Returned value is the address of the last sector. */
nb_sectors--;
/* Remember the new size for read/write sanity checking. */
s->max_lba = nb_sectors;
/* Clip to 2TB, instead of returning capacity modulo 2TB. */
- if (nb_sectors > UINT32_MAX)
+ if (nb_sectors > UINT32_MAX) {
nb_sectors = UINT32_MAX;
+ }
outbuf[0] = (nb_sectors >> 24) & 0xff;
outbuf[1] = (nb_sectors >> 16) & 0xff;
outbuf[2] = (nb_sectors >> 8) & 0xff;
@@ -960,8 +977,9 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
DPRINTF("SAI READ CAPACITY(16)\n");
memset(outbuf, 0, req->cmd.xfer);
bdrv_get_geometry(s->bs, &nb_sectors);
- if (!nb_sectors)
+ if (!nb_sectors) {
goto not_ready;
+ }
nb_sectors /= s->cluster_size;
/* Returned value is the address of the last sector. */
nb_sectors--;
@@ -1078,8 +1096,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case READ_16:
len = r->req.cmd.xfer / s->qdev.blocksize;
DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
- if (r->req.cmd.lba > s->max_lba)
+ if (r->req.cmd.lba > s->max_lba) {
goto illegal_lba;
+ }
r->sector = r->req.cmd.lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
break;
@@ -1094,8 +1113,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
(command & 0xe) == 0xe ? "And Verify " : "",
r->req.cmd.lba, len);
- if (r->req.cmd.lba > s->max_lba)
+ if (r->req.cmd.lba > s->max_lba) {
goto illegal_lba;
+ }
r->sector = r->req.cmd.lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
break;
@@ -1168,8 +1188,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
return -len;
} else {
- if (!r->sector_count)
+ if (!r->sector_count) {
r->sector_count = -1;
+ }
return len;
}
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 08/33] scsi-disk: add stubs for more MMC commands
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (6 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 07/33] scsi-disk: fix coding style issues (braces) Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 09/33] scsi-disk: store valid mode pages in a table Paolo Bonzini
` (25 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This patch adds a few stub implementations for MMC commands to
scsi-disk, to be filled in later in the series. It also adds to
scsi-defs.h constants for commands implemented by ide/atapi.c,
when missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: coding style (braces)
hw/scsi-defs.h | 3 ++
hw/scsi-disk.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++----
2 files changed, 65 insertions(+), 5 deletions(-)
diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index 5e6c9b7..d0a467a 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -113,6 +113,7 @@
#define READ_12 0xa8
#define WRITE_12 0xaa
#define SERVICE_ACTION_IN_12 0xab
+#define READ_DVD_STRUCTURE 0xad
#define WRITE_VERIFY_12 0xae
#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
@@ -122,6 +123,8 @@
#define SEND_VOLUME_TAG 0xb6
#define READ_DEFECT_DATA_12 0xb7
#define SET_CD_SPEED 0xbb
+#define MECHANISM_STATUS 0xbd
+#define READ_CD 0xbe
/*
* SERVICE ACTION IN subcodes
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 3a08848..0557ede 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -567,6 +567,43 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
return buflen;
}
+static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
+ uint8_t *outbuf)
+{
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return -1;
+}
+
+static int scsi_get_event_status_notification(SCSIDiskState *s,
+ SCSIDiskReq *r, uint8_t *outbuf)
+{
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return -1;
+}
+
+static int scsi_get_configuration(SCSIDiskState *s, SCSIDiskReq *r,
+ uint8_t *outbuf)
+{
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ memset(outbuf, 0, 8);
+ /* ??? This should probably return much more information. For now
+ just return the basic header indicating the CD-ROM profile. */
+ outbuf[7] = 8; /* CD-ROM */
+ return 8;
+}
+
+static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
+{
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ memset(outbuf, 0, 8);
+ outbuf[5] = 1; /* CD-ROM */
+ return 8;
+}
+
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
int page_control)
{
@@ -964,12 +1001,29 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
outbuf[7] = 0;
buflen = 8;
break;
+ case MECHANISM_STATUS:
+ buflen = scsi_emulate_mechanism_status(s, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
case GET_CONFIGURATION:
- memset(outbuf, 0, 8);
- /* ??? This should probably return much more information. For now
- just return the basic header indicating the CD-ROM profile. */
- outbuf[7] = 8; // CD-ROM
- buflen = 8;
+ buflen = scsi_get_configuration(s, r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case GET_EVENT_STATUS_NOTIFICATION:
+ buflen = scsi_get_event_status_notification(s, r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case READ_DVD_STRUCTURE:
+ buflen = scsi_read_dvd_structure(s, r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
break;
case SERVICE_ACTION_IN_16:
/* Service Action In subcommands. */
@@ -1073,7 +1127,10 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case ALLOW_MEDIUM_REMOVAL:
case READ_CAPACITY_10:
case READ_TOC:
+ case READ_DVD_STRUCTURE:
case GET_CONFIGURATION:
+ case GET_EVENT_STATUS_NOTIFICATION:
+ case MECHANISM_STATUS:
case SERVICE_ACTION_IN_16:
case VERIFY_10:
rc = scsi_disk_emulate_command(r);
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 09/33] scsi-disk: store valid mode pages in a table
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (7 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 08/33] scsi-disk: add stubs for more MMC commands Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 10/33] atapi/scsi-disk: make mode page values coherent between the two Paolo Bonzini
` (24 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
A small refactoring of the MODE SENSE implementation in scsi-disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 25 +++++++++++++------------
1 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 0557ede..bcce076 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -607,10 +607,23 @@ static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
int page_control)
{
+ static const int mode_sense_valid[0x3f] = {
+ [MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK),
+ [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
+ [MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
+ [MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM),
+ };
+
BlockDriverState *bdrv = s->bs;
int cylinders, heads, secs;
uint8_t *p = *p_outbuf;
+ if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
+ return -1;
+ }
+
+ p[0] = page;
+
/*
* If Changeable Values are requested, a mask denoting those mode parameters
* that are changeable shall be returned. As we currently don't support
@@ -619,10 +632,6 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
*/
switch (page) {
case MODE_PAGE_HD_GEOMETRY:
- if (s->qdev.type == TYPE_ROM) {
- return -1;
- }
- p[0] = 4;
p[1] = 0x16;
if (page_control == 1) { /* Changeable Values */
break;
@@ -654,10 +663,6 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
break;
case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
- if (s->qdev.type == TYPE_ROM) {
- return -1;
- }
- p[0] = 5;
p[1] = 0x1e;
if (page_control == 1) { /* Changeable Values */
break;
@@ -707,10 +712,6 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
break;
case MODE_PAGE_CAPABILITIES:
- if (s->qdev.type != TYPE_ROM) {
- return -1;
- }
- p[0] = 0x2a;
p[1] = 0x14;
if (page_control == 1) { /* Changeable Values */
break;
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 10/33] atapi/scsi-disk: make mode page values coherent between the two
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (8 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 09/33] scsi-disk: store valid mode pages in a table Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION Paolo Bonzini
` (23 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This patch adds to scsi-disk the missing mode page 0x01 for both disk
and CD-ROM drives, and mode page 0x0e for CD drives only.
A few offsets were wrong in atapi.c. Also change the 2Ah mode page to
expose DVD media read capabilities in the IDE cdrom. This lets you run
dvd+rw-mediainfo on the virtual DVD drives.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: use symbolic names and expressions for ATAPI
buf[8] and buf[9], write high byte of 2 as "2 >> 8".
hw/ide/atapi.c | 14 +++++++-------
hw/scsi-disk.c | 33 ++++++++++++++++++++++++---------
2 files changed, 31 insertions(+), 16 deletions(-)
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index e898da2..90b6729 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -751,7 +751,7 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[8] = MODE_PAGE_CAPABILITIES;
buf[9] = 28 - 10;
- buf[10] = 0x00;
+ buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
buf[11] = 0x00;
/* Claim PLAY_AUDIO capability (0x01) since some Linux
@@ -760,14 +760,14 @@ static void cmd_mode_sense(IDEState *s, uint8_t *buf)
buf[13] = 3 << 5;
buf[14] = (1 << 0) | (1 << 3) | (1 << 5);
if (s->tray_locked) {
- buf[6] |= 1 << 1;
+ buf[14] |= 1 << 1;
}
- buf[15] = 0x00;
- cpu_to_ube16(&buf[16], 706);
- buf[18] = 0;
+ buf[15] = 0x00; /* No volume & mute control, no changer */
+ cpu_to_ube16(&buf[16], 704); /* 4x read speed */
+ buf[18] = 0; /* Two volume levels */
buf[19] = 2;
- cpu_to_ube16(&buf[20], 512);
- cpu_to_ube16(&buf[22], 706);
+ cpu_to_ube16(&buf[20], 512); /* 512k buffer */
+ cpu_to_ube16(&buf[22], 704); /* 4x read speed current */
buf[24] = 0;
buf[25] = 0;
buf[26] = 0;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index bcce076..8f25e29 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -611,6 +611,8 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
[MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK),
[MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
[MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
+ [MODE_PAGE_R_W_ERROR] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
+ [MODE_PAGE_AUDIO_CTL] = (1 << TYPE_ROM),
[MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM),
};
@@ -711,13 +713,26 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
}
break;
+ case MODE_PAGE_R_W_ERROR:
+ p[1] = 10;
+ p[2] = 0x80; /* Automatic Write Reallocation Enabled */
+ if (s->qdev.type == TYPE_ROM) {
+ p[3] = 0x20; /* Read Retry Count */
+ }
+ break;
+
+ case MODE_PAGE_AUDIO_CTL:
+ p[1] = 14;
+ break;
+
case MODE_PAGE_CAPABILITIES:
p[1] = 0x14;
if (page_control == 1) { /* Changeable Values */
break;
}
- p[2] = 3; // CD-R & CD-RW read
- p[3] = 0; // Writing not supported
+
+ p[2] = 0x3b; /* CD-R & CD-RW read */
+ p[3] = 0; /* Writing not supported */
p[4] = 0x7f; /* Audio, composite, digital out,
mode 2 form 1&2, multi session */
p[5] = 0xff; /* CD DA, DA accurate, RW supported,
@@ -727,17 +742,17 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
/* Locking supported, jumper present, eject, tray */
p[7] = 0; /* no volume & mute control, no
changer */
- p[8] = (50 * 176) >> 8; // 50x read speed
+ p[8] = (50 * 176) >> 8; /* 50x read speed */
p[9] = (50 * 176) & 0xff;
- p[10] = 0 >> 8; // No volume
- p[11] = 0 & 0xff;
- p[12] = 2048 >> 8; // 2M buffer
+ p[10] = 2 >> 8; /* Two volume levels */
+ p[11] = 2 & 0xff;
+ p[12] = 2048 >> 8; /* 2M buffer */
p[13] = 2048 & 0xff;
- p[14] = (16 * 176) >> 8; // 16x read speed current
+ p[14] = (16 * 176) >> 8; /* 16x read speed current */
p[15] = (16 * 176) & 0xff;
- p[18] = (16 * 176) >> 8; // 16x write speed
+ p[18] = (16 * 176) >> 8; /* 16x write speed */
p[19] = (16 * 176) & 0xff;
- p[20] = (16 * 176) >> 8; // 16x write speed current
+ p[20] = (16 * 176) >> 8; /* 16x write speed current */
p[21] = (16 * 176) & 0xff;
break;
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (9 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 10/33] atapi/scsi-disk: make mode page values coherent between the two Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2012-01-25 16:34 ` Artyom Tarasenko
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 12/33] scsi-disk: support READ DVD STRUCTURE Paolo Bonzini
` (22 subsequent siblings)
33 siblings, 1 reply; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: fix comment for outbuf[8]-outbuf[19]
hw/scsi-disk.c | 50 ++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 42 insertions(+), 8 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 8f25e29..69af2e3 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -567,6 +567,19 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
return buflen;
}
+static inline bool media_is_dvd(SCSIDiskState *s)
+{
+ uint64_t nb_sectors;
+ if (s->qdev.type != TYPE_ROM) {
+ return false;
+ }
+ if (!bdrv_is_inserted(s->bs)) {
+ return false;
+ }
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ return nb_sectors > CD_MAX_SECTORS;
+}
+
static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
uint8_t *outbuf)
{
@@ -581,17 +594,38 @@ static int scsi_get_event_status_notification(SCSIDiskState *s,
return -1;
}
-static int scsi_get_configuration(SCSIDiskState *s, SCSIDiskReq *r,
- uint8_t *outbuf)
+static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
{
+ int current;
+
if (s->qdev.type != TYPE_ROM) {
return -1;
}
- memset(outbuf, 0, 8);
- /* ??? This should probably return much more information. For now
- just return the basic header indicating the CD-ROM profile. */
- outbuf[7] = 8; /* CD-ROM */
- return 8;
+ current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
+ memset(outbuf, 0, 40);
+ stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
+ stw_be_p(&outbuf[6], current);
+ /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
+ outbuf[10] = 0x03; /* persistent, current */
+ outbuf[11] = 8; /* two profiles */
+ stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
+ outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
+ stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
+ outbuf[18] = (current == MMC_PROFILE_CD_ROM);
+ /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
+ stw_be_p(&outbuf[20], 1);
+ outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
+ outbuf[23] = 8;
+ stl_be_p(&outbuf[24], 1); /* SCSI */
+ outbuf[28] = 1; /* DBE = 1, mandatory */
+ /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
+ stw_be_p(&outbuf[32], 3);
+ outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
+ outbuf[35] = 4;
+ outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
+ /* TODO: Random readable, CD read, DVD read, drive serial number,
+ power management */
+ return 40;
}
static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
@@ -1024,7 +1058,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
}
break;
case GET_CONFIGURATION:
- buflen = scsi_get_configuration(s, r, outbuf);
+ buflen = scsi_get_configuration(s, outbuf);
if (buflen < 0) {
goto illegal_request;
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 12/33] scsi-disk: support READ DVD STRUCTURE
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (10 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 13/33] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Paolo Bonzini
` (21 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: accept format 0xff when no media or a CD is inserted,
fix sense code for media != 0, use ARRAY_SIZE, braces,
remove bogus bdrv_is_inserted test.
hw/scsi-disk.c | 102 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 101 insertions(+), 1 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 69af2e3..4ed2fc1 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -580,10 +580,110 @@ static inline bool media_is_dvd(SCSIDiskState *s)
return nb_sectors > CD_MAX_SECTORS;
}
+static inline bool media_is_cd(SCSIDiskState *s)
+{
+ uint64_t nb_sectors;
+ if (s->qdev.type != TYPE_ROM) {
+ return false;
+ }
+ if (!bdrv_is_inserted(s->bs)) {
+ return false;
+ }
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ return nb_sectors <= CD_MAX_SECTORS;
+}
+
static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
uint8_t *outbuf)
{
- scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ static const int rds_caps_size[5] = {
+ [0] = 2048 + 4,
+ [1] = 4 + 4,
+ [3] = 188 + 4,
+ [4] = 2048 + 4,
+ };
+
+ uint8_t media = r->req.cmd.buf[1];
+ uint8_t layer = r->req.cmd.buf[6];
+ uint8_t format = r->req.cmd.buf[7];
+ int size = -1;
+
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ if (media != 0) {
+ scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+ return -1;
+ }
+
+ if (format != 0xff) {
+ if (s->tray_open || !bdrv_is_inserted(s->bs)) {
+ scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+ return -1;
+ }
+ if (media_is_cd(s)) {
+ scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
+ return -1;
+ }
+ if (format >= ARRAY_SIZE(rds_caps_size)) {
+ return -1;
+ }
+ size = rds_caps_size[format];
+ memset(outbuf, 0, size);
+ }
+
+ switch (format) {
+ case 0x00: {
+ /* Physical format information */
+ uint64_t nb_sectors;
+ if (layer != 0) {
+ goto fail;
+ }
+ bdrv_get_geometry(s->bs, &nb_sectors);
+
+ outbuf[4] = 1; /* DVD-ROM, part version 1 */
+ outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
+ outbuf[6] = 1; /* one layer, read-only (per MMC-2 spec) */
+ outbuf[7] = 0; /* default densities */
+
+ stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
+ stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
+ break;
+ }
+
+ case 0x01: /* DVD copyright information, all zeros */
+ break;
+
+ case 0x03: /* BCA information - invalid field for no BCA info */
+ return -1;
+
+ case 0x04: /* DVD disc manufacturing information, all zeros */
+ break;
+
+ case 0xff: { /* List capabilities */
+ int i;
+ size = 4;
+ for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
+ if (!rds_caps_size[i]) {
+ continue;
+ }
+ outbuf[size] = i;
+ outbuf[size + 1] = 0x40; /* Not writable, readable */
+ stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
+ size += 4;
+ }
+ break;
+ }
+
+ default:
+ return -1;
+ }
+
+ /* Size of buffer, not including 2 byte size field */
+ stw_be_p(outbuf, size - 2);
+ return size;
+
+fail:
return -1;
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 13/33] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (11 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 12/33] scsi-disk: support READ DVD STRUCTURE Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 14/33] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Paolo Bonzini
` (20 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This adds support for media change notification via the GET EVENT STATUS
NOTIFICATION command, used by Linux versions 2.6.38 and newer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 53 insertions(+), 4 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 4ed2fc1..ec8f20e 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -72,6 +72,7 @@ struct SCSIDiskState
uint32_t removable;
uint64_t max_lba;
bool media_changed;
+ bool media_event;
QEMUBH *bh;
char *version;
char *serial;
@@ -687,11 +688,58 @@ fail:
return -1;
}
-static int scsi_get_event_status_notification(SCSIDiskState *s,
- SCSIDiskReq *r, uint8_t *outbuf)
+static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
{
- scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
- return -1;
+ uint8_t event_code, media_status;
+
+ media_status = 0;
+ if (s->tray_open) {
+ media_status = MS_TRAY_OPEN;
+ } else if (bdrv_is_inserted(s->bs)) {
+ media_status = MS_MEDIA_PRESENT;
+ }
+
+ /* Event notification descriptor */
+ event_code = MEC_NO_CHANGE;
+ if (media_status != MS_TRAY_OPEN && s->media_event) {
+ event_code = MEC_NEW_MEDIA;
+ s->media_event = false;
+ }
+
+ outbuf[0] = event_code;
+ outbuf[1] = media_status;
+
+ /* These fields are reserved, just clear them. */
+ outbuf[2] = 0;
+ outbuf[3] = 0;
+ return 4;
+}
+
+static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
+ uint8_t *outbuf)
+{
+ int size;
+ uint8_t *buf = r->req.cmd.buf;
+ uint8_t notification_class_request = buf[4];
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ if ((buf[1] & 1) == 0) {
+ /* asynchronous */
+ return -1;
+ }
+
+ size = 4;
+ outbuf[0] = outbuf[1] = 0;
+ outbuf[3] = 1 << GESN_MEDIA; /* supported events */
+ if (notification_class_request & (1 << GESN_MEDIA)) {
+ outbuf[2] = GESN_MEDIA;
+ size += scsi_event_status_media(s, &outbuf[size]);
+ } else {
+ outbuf[2] = 0x80;
+ }
+ stw_be_p(outbuf, size - 4);
+ return size;
}
static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
@@ -1442,6 +1490,7 @@ static void scsi_cd_change_media_cb(void *opaque, bool load)
s->media_changed = load;
s->tray_open = !load;
s->qdev.unit_attention = SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM);
+ s->media_event = true;
}
static bool scsi_cd_is_tray_open(void *opaque)
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 14/33] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo)
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (12 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 13/33] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 15/33] qdev: switch children device list to QTAILQ Paolo Bonzini
` (19 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: do not change max target in VSCSI
hw/esp.c | 7 +++++--
hw/lsi53c895a.c | 9 ++++++---
hw/scsi-bus.c | 27 ++++++++++++---------------
hw/scsi-disk.c | 2 +-
hw/scsi.h | 11 +++++------
hw/spapr_vscsi.c | 8 +++++---
hw/usb-msd.c | 7 +++++--
7 files changed, 39 insertions(+), 32 deletions(-)
diff --git a/hw/esp.c b/hw/esp.c
index 697c2c5..d3fb1c6 100644
--- a/hw/esp.c
+++ b/hw/esp.c
@@ -720,7 +720,10 @@ void esp_init(target_phys_addr_t espaddr, int it_shift,
*dma_enable = qdev_get_gpio_in(dev, 1);
}
-static const struct SCSIBusOps esp_scsi_ops = {
+static const struct SCSIBusInfo esp_scsi_info = {
+ .tcq = false,
+ .ndev = ESP_MAX_DEVS,
+
.transfer_data = esp_transfer_data,
.complete = esp_command_complete,
.cancel = esp_request_cancelled
@@ -740,7 +743,7 @@ static int esp_init1(SysBusDevice *dev)
qdev_init_gpio_in(&dev->qdev, esp_gpio_demux, 2);
- scsi_bus_new(&s->bus, &dev->qdev, 0, ESP_MAX_DEVS, &esp_scsi_ops);
+ scsi_bus_new(&s->bus, &dev->qdev, &esp_scsi_info);
return scsi_bus_legacy_handle_cmdline(&s->bus);
}
diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index e077ec0..4eeb496 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -1686,7 +1686,7 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
DeviceState *dev;
int id;
- for (id = 0; id < s->bus.ndev; id++) {
+ for (id = 0; id < LSI_MAX_DEVS; id++) {
if (s->bus.devs[id]) {
dev = &s->bus.devs[id]->qdev;
dev->info->reset(dev);
@@ -2091,7 +2091,10 @@ static int lsi_scsi_uninit(PCIDevice *d)
return 0;
}
-static const struct SCSIBusOps lsi_scsi_ops = {
+static const struct SCSIBusInfo lsi_scsi_info = {
+ .tcq = true,
+ .ndev = LSI_MAX_DEVS,
+
.transfer_data = lsi_transfer_data,
.complete = lsi_command_complete,
.cancel = lsi_request_cancelled
@@ -2118,7 +2121,7 @@ static int lsi_scsi_init(PCIDevice *dev)
pci_register_bar(&s->dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->ram_io);
QTAILQ_INIT(&s->queue);
- scsi_bus_new(&s->bus, &dev->qdev, 1, LSI_MAX_DEVS, &lsi_scsi_ops);
+ scsi_bus_new(&s->bus, &dev->qdev, &lsi_scsi_info);
if (!dev->qdev.hotplugged) {
return scsi_bus_legacy_handle_cmdline(&s->bus);
}
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 867b1a8..d9d4e18 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -24,14 +24,11 @@ static struct BusInfo scsi_bus_info = {
static int next_scsi_bus;
/* Create a scsi bus, and attach devices to it. */
-void scsi_bus_new(SCSIBus *bus, DeviceState *host, int tcq, int ndev,
- const SCSIBusOps *ops)
+void scsi_bus_new(SCSIBus *bus, DeviceState *host, const SCSIBusInfo *info)
{
qbus_create_inplace(&bus->qbus, &scsi_bus_info, host, NULL);
bus->busnr = next_scsi_bus++;
- bus->tcq = tcq;
- bus->ndev = ndev;
- bus->ops = ops;
+ bus->info = info;
bus->qbus.allow_hotplug = 1;
}
@@ -43,12 +40,12 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
int rc = -1;
if (dev->id == -1) {
- for (dev->id = 0; dev->id < bus->ndev; dev->id++) {
+ for (dev->id = 0; dev->id < bus->info->ndev; dev->id++) {
if (bus->devs[dev->id] == NULL)
break;
}
}
- if (dev->id >= bus->ndev) {
+ if (dev->id >= bus->info->ndev) {
error_report("bad scsi device id: %d", dev->id);
goto err;
}
@@ -120,7 +117,7 @@ int scsi_bus_legacy_handle_cmdline(SCSIBus *bus)
int res = 0, unit;
loc_push_none(&loc);
- for (unit = 0; unit < bus->ndev; unit++) {
+ for (unit = 0; unit < bus->info->ndev; unit++) {
dinfo = drive_get(IF_SCSI, bus->busnr, unit);
if (dinfo == NULL) {
continue;
@@ -265,7 +262,7 @@ static bool scsi_target_emulate_inquiry(SCSITargetReq *r)
r->buf[2] = 5; /* Version */
r->buf[3] = 2 | 0x10; /* HiSup, response data format */
r->buf[4] = r->len - 5; /* Additional Length = (Len - 1) - 4 */
- r->buf[7] = 0x10 | (r->req.bus->tcq ? 0x02 : 0); /* Sync, TCQ. */
+ r->buf[7] = 0x10 | (r->req.bus->info->tcq ? 0x02 : 0); /* Sync, TCQ. */
memcpy(&r->buf[8], "QEMU ", 8);
memcpy(&r->buf[16], "QEMU TARGET ", 16);
strncpy((char *) &r->buf[32], QEMU_VERSION, 4);
@@ -1062,7 +1059,7 @@ void scsi_req_continue(SCSIRequest *req)
void scsi_req_data(SCSIRequest *req, int len)
{
trace_scsi_req_data(req->dev->id, req->lun, req->tag, len);
- req->bus->ops->transfer_data(req, len);
+ req->bus->info->transfer_data(req, len);
}
void scsi_req_print(SCSIRequest *req)
@@ -1121,7 +1118,7 @@ void scsi_req_complete(SCSIRequest *req, int status)
scsi_req_ref(req);
scsi_req_dequeue(req);
- req->bus->ops->complete(req, req->status);
+ req->bus->info->complete(req, req->status);
scsi_req_unref(req);
}
@@ -1132,8 +1129,8 @@ void scsi_req_cancel(SCSIRequest *req)
}
scsi_req_ref(req);
scsi_req_dequeue(req);
- if (req->bus->ops->cancel) {
- req->bus->ops->cancel(req);
+ if (req->bus->info->cancel) {
+ req->bus->info->cancel(req);
}
scsi_req_unref(req);
}
@@ -1164,13 +1161,13 @@ static char *scsibus_get_fw_dev_path(DeviceState *dev)
char path[100];
int i;
- for (i = 0; i < bus->ndev; i++) {
+ for (i = 0; i < bus->info->ndev; i++) {
if (bus->devs[i] == d) {
break;
}
}
- assert(i != bus->ndev);
+ assert(i != bus->info->ndev);
snprintf(path, sizeof(path), "%s@%x", qdev_fw_name(dev), i);
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index ec8f20e..a64b4f0 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -564,7 +564,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
}
/* Sync data transfer and TCQ. */
- outbuf[7] = 0x10 | (req->bus->tcq ? 0x02 : 0);
+ outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
return buflen;
}
diff --git a/hw/scsi.h b/hw/scsi.h
index 7004aaa..b76c4ee 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -9,7 +9,7 @@
#define SCSI_CMD_BUF_SIZE 16
typedef struct SCSIBus SCSIBus;
-typedef struct SCSIBusOps SCSIBusOps;
+typedef struct SCSIBusInfo SCSIBusInfo;
typedef struct SCSICommand SCSICommand;
typedef struct SCSIDevice SCSIDevice;
typedef struct SCSIDeviceInfo SCSIDeviceInfo;
@@ -97,7 +97,8 @@ struct SCSIDeviceInfo {
SCSIReqOps reqops;
};
-struct SCSIBusOps {
+struct SCSIBusInfo {
+ int tcq, ndev;
void (*transfer_data)(SCSIRequest *req, uint32_t arg);
void (*complete)(SCSIRequest *req, uint32_t arg);
void (*cancel)(SCSIRequest *req);
@@ -108,14 +109,12 @@ struct SCSIBus {
int busnr;
SCSISense unit_attention;
- int tcq, ndev;
- const SCSIBusOps *ops;
+ const SCSIBusInfo *info;
SCSIDevice *devs[MAX_SCSI_DEVS];
};
-void scsi_bus_new(SCSIBus *bus, DeviceState *host, int tcq, int ndev,
- const SCSIBusOps *ops);
+void scsi_bus_new(SCSIBus *bus, DeviceState *host, const SCSIBusInfo *info);
void scsi_qdev_register(SCSIDeviceInfo *info);
static inline SCSIBus *scsi_bus_from_device(SCSIDevice *d)
diff --git a/hw/spapr_vscsi.c b/hw/spapr_vscsi.c
index e8426d7..33ae9b4 100644
--- a/hw/spapr_vscsi.c
+++ b/hw/spapr_vscsi.c
@@ -862,7 +862,10 @@ static int vscsi_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
return 0;
}
-static const struct SCSIBusOps vscsi_scsi_ops = {
+static const struct SCSIBusInfo vscsi_scsi_info = {
+ .tcq = true,
+ .ndev = VSCSI_REQ_LIMIT,
+
.transfer_data = vscsi_transfer_data,
.complete = vscsi_command_complete,
.cancel = vscsi_request_cancelled
@@ -883,8 +886,7 @@ static int spapr_vscsi_init(VIOsPAPRDevice *dev)
dev->crq.SendFunc = vscsi_do_crq;
- scsi_bus_new(&s->bus, &dev->qdev, 1, VSCSI_REQ_LIMIT,
- &vscsi_scsi_ops);
+ scsi_bus_new(&s->bus, &dev->qdev, &vscsi_scsi_info);
if (!dev->qdev.hotplugged) {
scsi_bus_legacy_handle_cmdline(&s->bus);
}
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index 08d2d2a..2c047fa 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -495,7 +495,10 @@ static void usb_msd_password_cb(void *opaque, int err)
qdev_unplug(&s->dev.qdev);
}
-static const struct SCSIBusOps usb_msd_scsi_ops = {
+static const struct SCSIBusInfo usb_msd_scsi_info = {
+ .tcq = false,
+ .ndev = 1,
+
.transfer_data = usb_msd_transfer_data,
.complete = usb_msd_command_complete,
.cancel = usb_msd_request_cancelled
@@ -536,7 +539,7 @@ static int usb_msd_initfn(USBDevice *dev)
}
usb_desc_init(dev);
- scsi_bus_new(&s->bus, &s->dev.qdev, 0, 1, &usb_msd_scsi_ops);
+ scsi_bus_new(&s->bus, &s->dev.qdev, &usb_msd_scsi_info);
s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, bs, 0, !!s->removable);
if (!s->scsi_dev) {
return -1;
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 15/33] qdev: switch children device list to QTAILQ
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (13 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 14/33] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 16/33] scsi: remove devs array from SCSIBus Paolo Bonzini
` (18 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
SCSI buses will need to read the children list first-to-last. This
requires using a QTAILQ, because hell breaks loose if you just try
inserting at the tail (thus reversing the order of all existing
visits from last-to-first to first-to-tail).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/acpi_piix4.c | 4 ++--
hw/i2c.c | 2 +-
hw/intel-hda.c | 6 +++---
hw/qdev.c | 24 ++++++++++++------------
hw/qdev.h | 4 ++--
hw/s390-virtio-bus.c | 4 ++--
hw/spapr_vio.c | 6 +++---
hw/ssi.c | 6 +++---
8 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index 29f0f76..d9075e6 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -276,7 +276,7 @@ static void piix4_update_hotplug(PIIX4PMState *s)
s->pci0_hotplug_enable = ~0;
- QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
+ QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
PCIDeviceInfo *info = container_of(qdev->info, PCIDeviceInfo, qdev);
PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, qdev);
int slot = PCI_SLOT(pdev->devfn);
@@ -486,7 +486,7 @@ static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
PCIDeviceInfo *info;
int slot = ffs(val) - 1;
- QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
+ QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
dev = DO_UPCAST(PCIDevice, qdev, qdev);
info = container_of(qdev->info, PCIDeviceInfo, qdev);
if (PCI_SLOT(dev->devfn) == slot && !info->no_hotplug) {
diff --git a/hw/i2c.c b/hw/i2c.c
index 49b9ecb..9bcf3e1 100644
--- a/hw/i2c.c
+++ b/hw/i2c.c
@@ -84,7 +84,7 @@ int i2c_start_transfer(i2c_bus *bus, uint8_t address, int recv)
DeviceState *qdev;
i2c_slave *slave = NULL;
- QLIST_FOREACH(qdev, &bus->qbus.children, sibling) {
+ QTAILQ_FOREACH(qdev, &bus->qbus.children, sibling) {
i2c_slave *candidate = I2C_SLAVE_FROM_QDEV(qdev);
if (candidate->address == address) {
slave = candidate;
diff --git a/hw/intel-hda.c b/hw/intel-hda.c
index 4272204..c4e8c51 100644
--- a/hw/intel-hda.c
+++ b/hw/intel-hda.c
@@ -86,7 +86,7 @@ HDACodecDevice *hda_codec_find(HDACodecBus *bus, uint32_t cad)
DeviceState *qdev;
HDACodecDevice *cdev;
- QLIST_FOREACH(qdev, &bus->qbus.children, sibling) {
+ QTAILQ_FOREACH(qdev, &bus->qbus.children, sibling) {
cdev = DO_UPCAST(HDACodecDevice, qdev, qdev);
if (cdev->cad == cad) {
return cdev;
@@ -489,7 +489,7 @@ static void intel_hda_notify_codecs(IntelHDAState *d, uint32_t stream, bool runn
DeviceState *qdev;
HDACodecDevice *cdev;
- QLIST_FOREACH(qdev, &d->codecs.qbus.children, sibling) {
+ QTAILQ_FOREACH(qdev, &d->codecs.qbus.children, sibling) {
cdev = DO_UPCAST(HDACodecDevice, qdev, qdev);
if (cdev->info->stream) {
cdev->info->stream(cdev, stream, running);
@@ -1112,7 +1112,7 @@ static void intel_hda_reset(DeviceState *dev)
d->wall_base_ns = qemu_get_clock_ns(vm_clock);
/* reset codecs */
- QLIST_FOREACH(qdev, &d->codecs.qbus.children, sibling) {
+ QTAILQ_FOREACH(qdev, &d->codecs.qbus.children, sibling) {
cdev = DO_UPCAST(HDACodecDevice, qdev, qdev);
if (qdev->info->reset) {
qdev->info->reset(qdev);
diff --git a/hw/qdev.c b/hw/qdev.c
index a223d41..50976dd 100644
--- a/hw/qdev.c
+++ b/hw/qdev.c
@@ -91,7 +91,7 @@ static DeviceState *qdev_create_from_info(BusState *bus, DeviceInfo *info)
qdev_prop_set_defaults(dev, dev->info->props);
qdev_prop_set_defaults(dev, dev->parent_bus->info->props);
qdev_prop_set_globals(dev);
- QLIST_INSERT_HEAD(&bus->children, dev, sibling);
+ QTAILQ_INSERT_HEAD(&bus->children, dev, sibling);
if (qdev_hotplug) {
assert(bus->allow_hotplug);
dev->hotplugged = 1;
@@ -408,7 +408,7 @@ void qdev_free(DeviceState *dev)
if (dev->opts)
qemu_opts_del(dev->opts);
}
- QLIST_REMOVE(dev, sibling);
+ QTAILQ_REMOVE(&dev->parent_bus->children, dev, sibling);
for (prop = dev->info->props; prop && prop->name; prop++) {
if (prop->info->free) {
prop->info->free(dev, prop);
@@ -510,7 +510,7 @@ int qbus_walk_children(BusState *bus, qdev_walkerfn *devfn,
}
}
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
err = qdev_walk_children(dev, devfn, busfn, opaque);
if (err < 0) {
return err;
@@ -560,7 +560,7 @@ static BusState *qbus_find_recursive(BusState *bus, const char *name,
return bus;
}
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
QLIST_FOREACH(child, &dev->child_bus, sibling) {
ret = qbus_find_recursive(child, name, info);
if (ret) {
@@ -576,7 +576,7 @@ DeviceState *qdev_find_recursive(BusState *bus, const char *id)
DeviceState *dev, *ret;
BusState *child;
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
if (dev->id && strcmp(dev->id, id) == 0)
return dev;
QLIST_FOREACH(child, &dev->child_bus, sibling) {
@@ -609,7 +609,7 @@ static void qbus_list_dev(BusState *bus)
const char *sep = " ";
error_printf("devices at \"%s\":", bus->name);
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
error_printf("%s\"%s\"", sep, dev->info->name);
if (dev->id)
error_printf("/\"%s\"", dev->id);
@@ -640,17 +640,17 @@ static DeviceState *qbus_find_dev(BusState *bus, char *elem)
* (2) driver name
* (3) driver alias, if present
*/
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
if (dev->id && strcmp(dev->id, elem) == 0) {
return dev;
}
}
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
if (strcmp(dev->info->name, elem) == 0) {
return dev;
}
}
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
if (dev->info->alias && strcmp(dev->info->alias, elem) == 0) {
return dev;
}
@@ -774,7 +774,7 @@ void qbus_create_inplace(BusState *bus, BusInfo *info,
bus->name = buf;
}
- QLIST_INIT(&bus->children);
+ QTAILQ_INIT(&bus->children);
if (parent) {
QLIST_INSERT_HEAD(&parent->child_bus, bus, sibling);
parent->num_child_bus++;
@@ -809,7 +809,7 @@ void qbus_free(BusState *bus)
{
DeviceState *dev;
- while ((dev = QLIST_FIRST(&bus->children)) != NULL) {
+ while ((dev = QTAILQ_FIRST(&bus->children)) != NULL) {
qdev_free(dev);
}
if (bus->parent) {
@@ -878,7 +878,7 @@ static void qbus_print(Monitor *mon, BusState *bus, int indent)
qdev_printf("bus: %s\n", bus->name);
indent += 2;
qdev_printf("type %s\n", bus->info->name);
- QLIST_FOREACH(dev, &bus->children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->children, sibling) {
qdev_print(mon, dev, indent);
}
}
diff --git a/hw/qdev.h b/hw/qdev.h
index aa7ae36..a7cc48b 100644
--- a/hw/qdev.h
+++ b/hw/qdev.h
@@ -42,7 +42,7 @@ struct DeviceState {
qemu_irq *gpio_in;
QLIST_HEAD(, BusState) child_bus;
int num_child_bus;
- QLIST_ENTRY(DeviceState) sibling;
+ QTAILQ_ENTRY(DeviceState) sibling;
int instance_id_alias;
int alias_required_for_version;
};
@@ -73,7 +73,7 @@ struct BusState {
const char *name;
int allow_hotplug;
int qdev_allocated;
- QLIST_HEAD(, DeviceState) children;
+ QTAILQ_HEAD(, DeviceState) children;
QLIST_ENTRY(BusState) sibling;
};
diff --git a/hw/s390-virtio-bus.c b/hw/s390-virtio-bus.c
index e2f3e32..0ce6406 100644
--- a/hw/s390-virtio-bus.c
+++ b/hw/s390-virtio-bus.c
@@ -274,7 +274,7 @@ VirtIOS390Device *s390_virtio_bus_find_vring(VirtIOS390Bus *bus,
DeviceState *dev;
int i;
- QLIST_FOREACH(dev, &bus->bus.children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->bus.children, sibling) {
_dev = (VirtIOS390Device *)dev;
for(i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) {
if (!virtio_queue_get_addr(_dev->vdev, i))
@@ -297,7 +297,7 @@ VirtIOS390Device *s390_virtio_bus_find_mem(VirtIOS390Bus *bus, ram_addr_t mem)
VirtIOS390Device *_dev;
DeviceState *dev;
- QLIST_FOREACH(dev, &bus->bus.children, sibling) {
+ QTAILQ_FOREACH(dev, &bus->bus.children, sibling) {
_dev = (VirtIOS390Device *)dev;
if (_dev->dev_offs == mem) {
return _dev;
diff --git a/hw/spapr_vio.c b/hw/spapr_vio.c
index 35818e1..977603f 100644
--- a/hw/spapr_vio.c
+++ b/hw/spapr_vio.c
@@ -63,7 +63,7 @@ VIOsPAPRDevice *spapr_vio_find_by_reg(VIOsPAPRBus *bus, uint32_t reg)
DeviceState *qdev;
VIOsPAPRDevice *dev = NULL;
- QLIST_FOREACH(qdev, &bus->bus.children, sibling) {
+ QTAILQ_FOREACH(qdev, &bus->bus.children, sibling) {
dev = (VIOsPAPRDevice *)qdev;
if (dev->reg == reg) {
break;
@@ -588,7 +588,7 @@ static void rtas_quiesce(sPAPREnvironment *spapr, uint32_t token,
return;
}
- QLIST_FOREACH(qdev, &bus->bus.children, sibling) {
+ QTAILQ_FOREACH(qdev, &bus->bus.children, sibling) {
dev = (VIOsPAPRDevice *)qdev;
spapr_vio_quiesce_one(dev);
}
@@ -726,7 +726,7 @@ int spapr_populate_vdevice(VIOsPAPRBus *bus, void *fdt)
DeviceState *qdev;
int ret = 0;
- QLIST_FOREACH(qdev, &bus->bus.children, sibling) {
+ QTAILQ_FOREACH(qdev, &bus->bus.children, sibling) {
VIOsPAPRDevice *dev = (VIOsPAPRDevice *)qdev;
ret = vio_make_devnode(dev, fdt);
diff --git a/hw/ssi.c b/hw/ssi.c
index 3f4c5f9..9842fe7 100644
--- a/hw/ssi.c
+++ b/hw/ssi.c
@@ -25,8 +25,8 @@ static int ssi_slave_init(DeviceState *dev, DeviceInfo *base_info)
SSIBus *bus;
bus = FROM_QBUS(SSIBus, qdev_get_parent_bus(dev));
- if (QLIST_FIRST(&bus->qbus.children) != dev
- || QLIST_NEXT(dev, sibling) != NULL) {
+ if (QTAILQ_FIRST(&bus->qbus.children) != dev
+ || QTAILQ_NEXT(dev, sibling) != NULL) {
hw_error("Too many devices on SSI bus");
}
@@ -61,7 +61,7 @@ uint32_t ssi_transfer(SSIBus *bus, uint32_t val)
{
DeviceState *dev;
SSISlave *slave;
- dev = QLIST_FIRST(&bus->qbus.children);
+ dev = QTAILQ_FIRST(&bus->qbus.children);
if (!dev) {
return 0;
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 16/33] scsi: remove devs array from SCSIBus
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (14 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 15/33] qdev: switch children device list to QTAILQ Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 17/33] scsi: implement REPORT LUNS for arbitrary LUNs Paolo Bonzini
` (17 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Change the devs array into a linked list, and add a scsi_device_find
function to navigate the children list instead. This lets the SCSI
bus use more complex addressing, and HBAs can talk to the correct device
when there are multiple LUNs per target.
scsi_device_find may return another LUN on the same target if none is
found that matches exactly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
change esp.c to not overwrite s->current_dev.
hw/esp.c | 8 +++++---
hw/lsi53c895a.c | 22 +++++++---------------
hw/qdev.h | 2 +-
hw/scsi-bus.c | 53 ++++++++++++++++++++++++++++++-----------------------
hw/scsi.h | 3 +--
hw/spapr_vscsi.c | 14 ++++++--------
6 files changed, 50 insertions(+), 52 deletions(-)
diff --git a/hw/esp.c b/hw/esp.c
index d3fb1c6..aad290f 100644
--- a/hw/esp.c
+++ b/hw/esp.c
@@ -217,7 +217,8 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf)
s->async_len = 0;
}
- if (target >= ESP_MAX_DEVS || !s->bus.devs[target]) {
+ s->current_dev = scsi_device_find(&s->bus, target, 0);
+ if (!s->current_dev) {
// No such drive
s->rregs[ESP_RSTAT] = 0;
s->rregs[ESP_RINTR] = INTR_DC;
@@ -225,7 +226,6 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf)
esp_raise_irq(s);
return 0;
}
- s->current_dev = s->bus.devs[target];
return dmalen;
}
@@ -233,10 +233,12 @@ static void do_busid_cmd(ESPState *s, uint8_t *buf, uint8_t busid)
{
int32_t datalen;
int lun;
+ SCSIDevice *current_lun;
trace_esp_do_busid_cmd(busid);
lun = busid & 7;
- s->current_req = scsi_req_new(s->current_dev, 0, lun, buf, NULL);
+ current_lun = scsi_device_find(&s->bus, s->current_dev->id, lun);
+ s->current_req = scsi_req_new(current_lun, 0, lun, buf, NULL);
datalen = scsi_req_enqueue(s->current_req);
s->ti_size = datalen;
if (datalen != 0) {
diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index 4eeb496..c15f167 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -531,7 +531,7 @@ static void lsi_bad_selection(LSIState *s, uint32_t id)
/* Initiate a SCSI layer data transfer. */
static void lsi_do_dma(LSIState *s, int out)
{
- uint32_t count, id;
+ uint32_t count;
target_phys_addr_t addr;
SCSIDevice *dev;
@@ -542,12 +542,8 @@ static void lsi_do_dma(LSIState *s, int out)
return;
}
- id = (s->current->tag >> 8) & 0xf;
- dev = s->bus.devs[id];
- if (!dev) {
- lsi_bad_selection(s, id);
- return;
- }
+ dev = s->current->req->dev;
+ assert(dev);
count = s->dbc;
if (count > s->current->dma_len)
@@ -771,7 +767,7 @@ static void lsi_do_command(LSIState *s)
s->command_complete = 0;
id = (s->select_tag >> 8) & 0xf;
- dev = s->bus.devs[id];
+ dev = scsi_device_find(&s->bus, id, s->current_lun);
if (!dev) {
lsi_bad_selection(s, id);
return;
@@ -1202,7 +1198,7 @@ again:
}
s->sstat0 |= LSI_SSTAT0_WOA;
s->scntl1 &= ~LSI_SCNTL1_IARB;
- if (id >= LSI_MAX_DEVS || !s->bus.devs[id]) {
+ if (!scsi_device_find(&s->bus, id, 0)) {
lsi_bad_selection(s, id);
break;
}
@@ -1684,13 +1680,9 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
if (val & LSI_SCNTL1_RST) {
if (!(s->sstat0 & LSI_SSTAT0_RST)) {
DeviceState *dev;
- int id;
- for (id = 0; id < LSI_MAX_DEVS; id++) {
- if (s->bus.devs[id]) {
- dev = &s->bus.devs[id]->qdev;
- dev->info->reset(dev);
- }
+ QTAILQ_FOREACH(dev, &s->bus.qbus.children, sibling) {
+ dev->info->reset(dev);
}
s->sstat0 |= LSI_SSTAT0_RST;
lsi_script_scsi_interrupt(s, LSI_SIST0_RST, 0);
diff --git a/hw/qdev.h b/hw/qdev.h
index a7cc48b..36a4198 100644
--- a/hw/qdev.h
+++ b/hw/qdev.h
@@ -73,7 +73,7 @@ struct BusState {
const char *name;
int allow_hotplug;
int qdev_allocated;
- QTAILQ_HEAD(, DeviceState) children;
+ QTAILQ_HEAD(ChildrenHead, DeviceState) children;
QLIST_ENTRY(BusState) sibling;
};
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index d9d4e18..7104e98 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -37,12 +37,16 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
SCSIDeviceInfo *info = DO_UPCAST(SCSIDeviceInfo, qdev, base);
SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus);
+ SCSIDevice *olddev;
int rc = -1;
if (dev->id == -1) {
- for (dev->id = 0; dev->id < bus->info->ndev; dev->id++) {
- if (bus->devs[dev->id] == NULL)
+ int id;
+ for (id = 0; id < bus->info->ndev; id++) {
+ if (!scsi_device_find(bus, id, 0)) {
+ dev->id = id;
break;
+ }
}
}
if (dev->id >= bus->info->ndev) {
@@ -50,17 +54,14 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
goto err;
}
- if (bus->devs[dev->id]) {
- qdev_free(&bus->devs[dev->id]->qdev);
+ olddev = scsi_device_find(bus, dev->id, dev->lun);
+ if (olddev && dev->lun == olddev->lun) {
+ qdev_free(&olddev->qdev);
}
- bus->devs[dev->id] = dev;
dev->info = info;
QTAILQ_INIT(&dev->requests);
rc = dev->info->init(dev);
- if (rc != 0) {
- bus->devs[dev->id] = NULL;
- }
err:
return rc;
@@ -69,13 +70,10 @@ err:
static int scsi_qdev_exit(DeviceState *qdev)
{
SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
- SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus);
- assert(bus->devs[dev->id] != NULL);
- if (bus->devs[dev->id]->info->destroy) {
- bus->devs[dev->id]->info->destroy(bus->devs[dev->id]);
+ if (dev->info->destroy) {
+ dev->info->destroy(dev);
}
- bus->devs[dev->id] = NULL;
return 0;
}
@@ -1157,19 +1155,28 @@ void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense)
static char *scsibus_get_fw_dev_path(DeviceState *dev)
{
SCSIDevice *d = DO_UPCAST(SCSIDevice, qdev, dev);
- SCSIBus *bus = scsi_bus_from_device(d);
char path[100];
- int i;
- for (i = 0; i < bus->info->ndev; i++) {
- if (bus->devs[i] == d) {
- break;
- }
- }
+ snprintf(path, sizeof(path), "%s@%d:%d:%d", qdev_fw_name(dev),
+ 0, d->id, d->lun);
- assert(i != bus->info->ndev);
+ return strdup(path);
+}
+
+SCSIDevice *scsi_device_find(SCSIBus *bus, int id, int lun)
+{
+ DeviceState *qdev;
+ SCSIDevice *target_dev = NULL;
- snprintf(path, sizeof(path), "%s@%x", qdev_fw_name(dev), i);
+ QTAILQ_FOREACH_REVERSE(qdev, &bus->qbus.children, ChildrenHead, sibling) {
+ SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
- return strdup(path);
+ if (dev->id == id) {
+ if (dev->lun == lun) {
+ return dev;
+ }
+ target_dev = dev;
+ }
+ }
+ return target_dev;
}
diff --git a/hw/scsi.h b/hw/scsi.h
index b76c4ee..add3d2d 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -110,8 +110,6 @@ struct SCSIBus {
SCSISense unit_attention;
const SCSIBusInfo *info;
-
- SCSIDevice *devs[MAX_SCSI_DEVS];
};
void scsi_bus_new(SCSIBus *bus, DeviceState *host, const SCSIBusInfo *info);
@@ -195,5 +193,6 @@ void scsi_req_abort(SCSIRequest *req, int status);
void scsi_req_cancel(SCSIRequest *req);
void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense);
int scsi_device_get_sense(SCSIDevice *dev, uint8_t *buf, int len, bool fixed);
+SCSIDevice *scsi_device_find(SCSIBus *bus, int target, int lun);
#endif
diff --git a/hw/spapr_vscsi.c b/hw/spapr_vscsi.c
index 33ae9b4..c941f28 100644
--- a/hw/spapr_vscsi.c
+++ b/hw/spapr_vscsi.c
@@ -129,11 +129,12 @@ static void vscsi_put_req(vscsi_req *req)
req->active = 0;
}
-static void vscsi_decode_id_lun(uint64_t srp_lun, int *id, int *lun)
+static SCSIDevice *vscsi_device_find(SCSIBus *bus, uint64_t srp_lun, int *lun)
{
/* XXX Figure that one out properly ! This is crackpot */
- *id = (srp_lun >> 56) & 0x7f;
+ int id = (srp_lun >> 56) & 0x7f;
*lun = (srp_lun >> 48) & 0xff;
+ return scsi_device_find(bus, id, *lun);
}
static int vscsi_send_iu(VSCSIState *s, vscsi_req *req,
@@ -582,14 +583,11 @@ static int vscsi_queue_cmd(VSCSIState *s, vscsi_req *req)
{
union srp_iu *srp = &req->iu.srp;
SCSIDevice *sdev;
- int n, id, lun;
+ int n, lun;
- vscsi_decode_id_lun(be64_to_cpu(srp->cmd.lun), &id, &lun);
-
- /* Qemu vs. linux issue with LUNs to be sorted out ... */
- sdev = (id < 8 && lun < 16) ? s->bus.devs[id] : NULL;
+ sdev = vscsi_device_find(&s->bus, be64_to_cpu(srp->cmd.lun), &lun);
if (!sdev) {
- dprintf("VSCSI: Command for id %d with no drive\n", id);
+ dprintf("VSCSI: Command for lun %08" PRIx64 " with no drive\n", be64_to_cpu(srp->cmd.lun));
if (srp->cmd.cdb[0] == INQUIRY) {
vscsi_inquiry_no_target(s, req);
} else {
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 17/33] scsi: implement REPORT LUNS for arbitrary LUNs
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (15 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 16/33] scsi: remove devs array from SCSIBus Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 18/33] scsi: allow " Paolo Bonzini
` (16 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-bus.c | 49 +++++++++++++++++++++++++++++++++++++++----------
1 files changed, 39 insertions(+), 10 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 7104e98..a2d57a7 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -170,7 +170,7 @@ typedef struct SCSITargetReq SCSITargetReq;
struct SCSITargetReq {
SCSIRequest req;
int len;
- uint8_t buf[64];
+ uint8_t buf[2056];
};
static void store_lun(uint8_t *outbuf, int lun)
@@ -185,23 +185,52 @@ static void store_lun(uint8_t *outbuf, int lun)
static bool scsi_target_emulate_report_luns(SCSITargetReq *r)
{
- int len;
+ DeviceState *qdev;
+ int i, len, n;
+ int id;
+ bool found_lun0;
+
if (r->req.cmd.xfer < 16) {
return false;
}
if (r->req.cmd.buf[2] > 2) {
return false;
}
- len = MIN(sizeof r->buf, r->req.cmd.xfer);
+ id = r->req.dev->id;
+ found_lun0 = false;
+ n = 0;
+ QTAILQ_FOREACH(qdev, &r->req.bus->qbus.children, sibling) {
+ SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
+
+ if (dev->id == id) {
+ if (dev->lun == 0) {
+ found_lun0 = true;
+ }
+ n += 8;
+ }
+ }
+ if (!found_lun0) {
+ n += 8;
+ }
+ len = MIN(n + 8, r->req.cmd.xfer & ~7);
+ if (len > sizeof(r->buf)) {
+ /* TODO: > 256 LUNs? */
+ return false;
+ }
+
memset(r->buf, 0, len);
- if (r->req.dev->lun != 0) {
- r->buf[3] = 16;
- r->len = 24;
- store_lun(&r->buf[16], r->req.dev->lun);
- } else {
- r->buf[3] = 8;
- r->len = 16;
+ stl_be_p(&r->buf, n);
+ i = found_lun0 ? 8 : 16;
+ QTAILQ_FOREACH(qdev, &r->req.bus->qbus.children, sibling) {
+ SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
+
+ if (dev->id == id) {
+ store_lun(&r->buf[i], dev->lun);
+ i += 8;
+ }
}
+ assert(i == n + 8);
+ r->len = len;
return true;
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 18/33] scsi: allow arbitrary LUNs
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (16 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 17/33] scsi: implement REPORT LUNS for arbitrary LUNs Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 19/33] scsi: add channel to addressing Paolo Bonzini
` (15 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This only requires changes in two places: in SCSIBus, we need to look
for a free LUN if somebody creates a device with a pre-existing scsi-id
but the default LUN (-1, meaning "search for a free spot"); in vSCSI,
we need to actually parse the LUN according to the SCSI spec.
For vSCSI, max_target/max_lun are set according to the logical unit
addressing format in SAM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/esp.c | 3 ++-
hw/lsi53c895a.c | 3 ++-
hw/scsi-bus.c | 48 ++++++++++++++++++++++++++++++++----------------
hw/scsi.h | 3 ++-
hw/spapr_vscsi.c | 39 +++++++++++++++++++++++++++++++++++----
hw/usb-msd.c | 3 ++-
6 files changed, 75 insertions(+), 24 deletions(-)
diff --git a/hw/esp.c b/hw/esp.c
index aad290f..5742bb3 100644
--- a/hw/esp.c
+++ b/hw/esp.c
@@ -724,7 +724,8 @@ void esp_init(target_phys_addr_t espaddr, int it_shift,
static const struct SCSIBusInfo esp_scsi_info = {
.tcq = false,
- .ndev = ESP_MAX_DEVS,
+ .max_target = ESP_MAX_DEVS,
+ .max_lun = 7,
.transfer_data = esp_transfer_data,
.complete = esp_command_complete,
diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index c15f167..d26e442 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -2085,7 +2085,8 @@ static int lsi_scsi_uninit(PCIDevice *d)
static const struct SCSIBusInfo lsi_scsi_info = {
.tcq = true,
- .ndev = LSI_MAX_DEVS,
+ .max_target = LSI_MAX_DEVS,
+ .max_lun = 0, /* LUN support is buggy */
.transfer_data = lsi_transfer_data,
.complete = lsi_command_complete,
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index a2d57a7..cec06db 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -17,7 +17,7 @@ static struct BusInfo scsi_bus_info = {
.get_fw_dev_path = scsibus_get_fw_dev_path,
.props = (Property[]) {
DEFINE_PROP_UINT32("scsi-id", SCSIDevice, id, -1),
- DEFINE_PROP_UINT32("lun", SCSIDevice, lun, 0),
+ DEFINE_PROP_UINT32("lun", SCSIDevice, lun, -1),
DEFINE_PROP_END_OF_LIST(),
},
};
@@ -37,26 +37,42 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
SCSIDeviceInfo *info = DO_UPCAST(SCSIDeviceInfo, qdev, base);
SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus);
- SCSIDevice *olddev;
+ SCSIDevice *d;
int rc = -1;
- if (dev->id == -1) {
- int id;
- for (id = 0; id < bus->info->ndev; id++) {
- if (!scsi_device_find(bus, id, 0)) {
- dev->id = id;
- break;
- }
- }
- }
- if (dev->id >= bus->info->ndev) {
+ if (dev->id != -1 && dev->id > bus->info->max_target) {
error_report("bad scsi device id: %d", dev->id);
goto err;
}
- olddev = scsi_device_find(bus, dev->id, dev->lun);
- if (olddev && dev->lun == olddev->lun) {
- qdev_free(&olddev->qdev);
+ if (dev->id == -1) {
+ int id = -1;
+ if (dev->lun == -1) {
+ dev->lun = 0;
+ }
+ do {
+ d = scsi_device_find(bus, ++id, dev->lun);
+ } while (d && d->lun == dev->lun && id <= bus->info->max_target);
+ if (id > bus->info->max_target) {
+ error_report("no free target");
+ goto err;
+ }
+ dev->id = id;
+ } else if (dev->lun == -1) {
+ int lun = -1;
+ do {
+ d = scsi_device_find(bus, dev->id, ++lun);
+ } while (d && d->lun == lun && lun < bus->info->max_lun);
+ if (lun > bus->info->max_lun) {
+ error_report("no free lun");
+ goto err;
+ }
+ dev->lun = lun;
+ } else {
+ d = scsi_device_find(bus, dev->id, dev->lun);
+ if (dev->lun == d->lun && dev != d) {
+ qdev_free(&d->qdev);
+ }
}
dev->info = info;
@@ -115,7 +131,7 @@ int scsi_bus_legacy_handle_cmdline(SCSIBus *bus)
int res = 0, unit;
loc_push_none(&loc);
- for (unit = 0; unit < bus->info->ndev; unit++) {
+ for (unit = 0; unit < bus->info->max_target; unit++) {
dinfo = drive_get(IF_SCSI, bus->busnr, unit);
if (dinfo == NULL) {
continue;
diff --git a/hw/scsi.h b/hw/scsi.h
index add3d2d..401d8d3 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -98,7 +98,8 @@ struct SCSIDeviceInfo {
};
struct SCSIBusInfo {
- int tcq, ndev;
+ int tcq;
+ int max_target, max_lun;
void (*transfer_data)(SCSIRequest *req, uint32_t arg);
void (*complete)(SCSIRequest *req, uint32_t arg);
void (*cancel)(SCSIRequest *req);
diff --git a/hw/spapr_vscsi.c b/hw/spapr_vscsi.c
index c941f28..334b2e6 100644
--- a/hw/spapr_vscsi.c
+++ b/hw/spapr_vscsi.c
@@ -131,9 +131,39 @@ static void vscsi_put_req(vscsi_req *req)
static SCSIDevice *vscsi_device_find(SCSIBus *bus, uint64_t srp_lun, int *lun)
{
- /* XXX Figure that one out properly ! This is crackpot */
- int id = (srp_lun >> 56) & 0x7f;
- *lun = (srp_lun >> 48) & 0xff;
+ int channel = 0, id = 0;
+
+retry:
+ switch (srp_lun >> 62) {
+ case 0:
+ if ((srp_lun >> 56) != 0) {
+ channel = (srp_lun >> 56) & 0x3f;
+ id = (srp_lun >> 48) & 0xff;
+ srp_lun <<= 16;
+ goto retry;
+ }
+ *lun = (srp_lun >> 48) & 0xff;
+ break;
+
+ case 1:
+ *lun = (srp_lun >> 48) & 0x3fff;
+ break;
+ case 2:
+ channel = (srp_lun >> 53) & 0x7;
+ id = (srp_lun >> 56) & 0x3f;
+ *lun = (srp_lun >> 48) & 0x1f;
+ break;
+ case 3:
+ *lun = -1;
+ return NULL;
+ default:
+ abort();
+ }
+
+ if (channel) {
+ *lun = -1;
+ return NULL;
+ }
return scsi_device_find(bus, id, *lun);
}
@@ -862,7 +892,8 @@ static int vscsi_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
static const struct SCSIBusInfo vscsi_scsi_info = {
.tcq = true,
- .ndev = VSCSI_REQ_LIMIT,
+ .max_target = 63, /* logical unit addressing format */
+ .max_lun = 31,
.transfer_data = vscsi_transfer_data,
.complete = vscsi_command_complete,
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index 2c047fa..1a0815a 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -497,7 +497,8 @@ static void usb_msd_password_cb(void *opaque, int err)
static const struct SCSIBusInfo usb_msd_scsi_info = {
.tcq = false,
- .ndev = 1,
+ .max_target = 0,
+ .max_lun = 0,
.transfer_data = usb_msd_transfer_data,
.complete = usb_msd_command_complete,
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 19/33] scsi: add channel to addressing
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (17 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 18/33] scsi: allow " Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 20/33] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Paolo Bonzini
` (14 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This also requires little more than adding the new argument to
scsi_device_find, and the qdev property. All devices by default
end up on channel 0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/esp.c | 4 ++--
hw/lsi53c895a.c | 4 ++--
hw/scsi-bus.c | 24 +++++++++++++++---------
hw/scsi.h | 5 +++--
hw/spapr_vscsi.c | 9 +++------
5 files changed, 25 insertions(+), 21 deletions(-)
diff --git a/hw/esp.c b/hw/esp.c
index 5742bb3..b698a43 100644
--- a/hw/esp.c
+++ b/hw/esp.c
@@ -217,7 +217,7 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf)
s->async_len = 0;
}
- s->current_dev = scsi_device_find(&s->bus, target, 0);
+ s->current_dev = scsi_device_find(&s->bus, 0, target, 0);
if (!s->current_dev) {
// No such drive
s->rregs[ESP_RSTAT] = 0;
@@ -237,7 +237,7 @@ static void do_busid_cmd(ESPState *s, uint8_t *buf, uint8_t busid)
trace_esp_do_busid_cmd(busid);
lun = busid & 7;
- current_lun = scsi_device_find(&s->bus, s->current_dev->id, lun);
+ current_lun = scsi_device_find(&s->bus, 0, s->current_dev->id, lun);
s->current_req = scsi_req_new(current_lun, 0, lun, buf, NULL);
datalen = scsi_req_enqueue(s->current_req);
s->ti_size = datalen;
diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index d26e442..2984cea 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -767,7 +767,7 @@ static void lsi_do_command(LSIState *s)
s->command_complete = 0;
id = (s->select_tag >> 8) & 0xf;
- dev = scsi_device_find(&s->bus, id, s->current_lun);
+ dev = scsi_device_find(&s->bus, 0, id, s->current_lun);
if (!dev) {
lsi_bad_selection(s, id);
return;
@@ -1198,7 +1198,7 @@ again:
}
s->sstat0 |= LSI_SSTAT0_WOA;
s->scntl1 &= ~LSI_SCNTL1_IARB;
- if (!scsi_device_find(&s->bus, id, 0)) {
+ if (!scsi_device_find(&s->bus, 0, id, 0)) {
lsi_bad_selection(s, id);
break;
}
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index cec06db..bdd6e94 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -16,6 +16,7 @@ static struct BusInfo scsi_bus_info = {
.size = sizeof(SCSIBus),
.get_fw_dev_path = scsibus_get_fw_dev_path,
.props = (Property[]) {
+ DEFINE_PROP_UINT32("channel", SCSIDevice, channel, 0),
DEFINE_PROP_UINT32("scsi-id", SCSIDevice, id, -1),
DEFINE_PROP_UINT32("lun", SCSIDevice, lun, -1),
DEFINE_PROP_END_OF_LIST(),
@@ -40,6 +41,10 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
SCSIDevice *d;
int rc = -1;
+ if (dev->channel > bus->info->max_channel) {
+ error_report("bad scsi channel id: %d", dev->channel);
+ goto err;
+ }
if (dev->id != -1 && dev->id > bus->info->max_target) {
error_report("bad scsi device id: %d", dev->id);
goto err;
@@ -51,7 +56,7 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
dev->lun = 0;
}
do {
- d = scsi_device_find(bus, ++id, dev->lun);
+ d = scsi_device_find(bus, dev->channel, ++id, dev->lun);
} while (d && d->lun == dev->lun && id <= bus->info->max_target);
if (id > bus->info->max_target) {
error_report("no free target");
@@ -61,7 +66,7 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
} else if (dev->lun == -1) {
int lun = -1;
do {
- d = scsi_device_find(bus, dev->id, ++lun);
+ d = scsi_device_find(bus, dev->channel, dev->id, ++lun);
} while (d && d->lun == lun && lun < bus->info->max_lun);
if (lun > bus->info->max_lun) {
error_report("no free lun");
@@ -69,7 +74,7 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
}
dev->lun = lun;
} else {
- d = scsi_device_find(bus, dev->id, dev->lun);
+ d = scsi_device_find(bus, dev->channel, dev->id, dev->lun);
if (dev->lun == d->lun && dev != d) {
qdev_free(&d->qdev);
}
@@ -203,7 +208,7 @@ static bool scsi_target_emulate_report_luns(SCSITargetReq *r)
{
DeviceState *qdev;
int i, len, n;
- int id;
+ int channel, id;
bool found_lun0;
if (r->req.cmd.xfer < 16) {
@@ -212,13 +217,14 @@ static bool scsi_target_emulate_report_luns(SCSITargetReq *r)
if (r->req.cmd.buf[2] > 2) {
return false;
}
+ channel = r->req.dev->channel;
id = r->req.dev->id;
found_lun0 = false;
n = 0;
QTAILQ_FOREACH(qdev, &r->req.bus->qbus.children, sibling) {
SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
- if (dev->id == id) {
+ if (dev->channel == channel && dev->id == id) {
if (dev->lun == 0) {
found_lun0 = true;
}
@@ -240,7 +246,7 @@ static bool scsi_target_emulate_report_luns(SCSITargetReq *r)
QTAILQ_FOREACH(qdev, &r->req.bus->qbus.children, sibling) {
SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
- if (dev->id == id) {
+ if (dev->channel == channel && dev->id == id) {
store_lun(&r->buf[i], dev->lun);
i += 8;
}
@@ -1203,12 +1209,12 @@ static char *scsibus_get_fw_dev_path(DeviceState *dev)
char path[100];
snprintf(path, sizeof(path), "%s@%d:%d:%d", qdev_fw_name(dev),
- 0, d->id, d->lun);
+ d->channel, d->id, d->lun);
return strdup(path);
}
-SCSIDevice *scsi_device_find(SCSIBus *bus, int id, int lun)
+SCSIDevice *scsi_device_find(SCSIBus *bus, int channel, int id, int lun)
{
DeviceState *qdev;
SCSIDevice *target_dev = NULL;
@@ -1216,7 +1222,7 @@ SCSIDevice *scsi_device_find(SCSIBus *bus, int id, int lun)
QTAILQ_FOREACH_REVERSE(qdev, &bus->qbus.children, ChildrenHead, sibling) {
SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev);
- if (dev->id == id) {
+ if (dev->channel == channel && dev->id == id) {
if (dev->lun == lun) {
return dev;
}
diff --git a/hw/scsi.h b/hw/scsi.h
index 401d8d3..c8649cf 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -66,6 +66,7 @@ struct SCSIDevice
uint8_t sense[SCSI_SENSE_BUF_SIZE];
uint32_t sense_len;
QTAILQ_HEAD(, SCSIRequest) requests;
+ uint32_t channel;
uint32_t lun;
int blocksize;
int type;
@@ -99,7 +100,7 @@ struct SCSIDeviceInfo {
struct SCSIBusInfo {
int tcq;
- int max_target, max_lun;
+ int max_channel, max_target, max_lun;
void (*transfer_data)(SCSIRequest *req, uint32_t arg);
void (*complete)(SCSIRequest *req, uint32_t arg);
void (*cancel)(SCSIRequest *req);
@@ -194,6 +195,6 @@ void scsi_req_abort(SCSIRequest *req, int status);
void scsi_req_cancel(SCSIRequest *req);
void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense);
int scsi_device_get_sense(SCSIDevice *dev, uint8_t *buf, int len, bool fixed);
-SCSIDevice *scsi_device_find(SCSIBus *bus, int target, int lun);
+SCSIDevice *scsi_device_find(SCSIBus *bus, int channel, int target, int lun);
#endif
diff --git a/hw/spapr_vscsi.c b/hw/spapr_vscsi.c
index 334b2e6..2f9cbc8 100644
--- a/hw/spapr_vscsi.c
+++ b/hw/spapr_vscsi.c
@@ -160,11 +160,7 @@ retry:
abort();
}
- if (channel) {
- *lun = -1;
- return NULL;
- }
- return scsi_device_find(bus, id, *lun);
+ return scsi_device_find(bus, channel, id, *lun);
}
static int vscsi_send_iu(VSCSIState *s, vscsi_req *req,
@@ -892,7 +888,8 @@ static int vscsi_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
static const struct SCSIBusInfo vscsi_scsi_info = {
.tcq = true,
- .max_target = 63, /* logical unit addressing format */
+ .max_channel = 7, /* logical unit addressing format */
+ .max_target = 63,
.max_lun = 31,
.transfer_data = vscsi_transfer_data,
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 20/33] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (18 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 19/33] scsi: add channel to addressing Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 21/33] scsi-disk: fix retrying a flush Paolo Bonzini
` (13 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Tested by the Windows Logo Kit SCSI Compliance test. From SBC-3, paragraph
5.25: "The LOGICAL BLOCK ADDRESS field shall be set to zero if the PMI
bit is set to zero. If the PMI bit is set to zero and the LOGICAL BLOCK
ADDRESS field is not set to zero, then the device server shall terminate
the command with CHECK CONDITION status with the sense key set to ILLEGAL
REQUEST and the additional sense code set to INVALID FIELD IN CDB".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index a64b4f0..98881c6 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1180,6 +1180,9 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
if (!nb_sectors) {
goto not_ready;
}
+ if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
+ goto illegal_request;
+ }
nb_sectors /= s->cluster_size;
/* Returned value is the address of the last sector. */
nb_sectors--;
@@ -1232,6 +1235,9 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
if (!nb_sectors) {
goto not_ready;
}
+ if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
+ goto illegal_request;
+ }
nb_sectors /= s->cluster_size;
/* Returned value is the address of the last sector. */
nb_sectors--;
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 21/33] scsi-disk: fix retrying a flush
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (19 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 20/33] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 22/33] scsi-generic: drop SCSIGenericState Paolo Bonzini
` (12 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Flush does not go anymore through scsi_disk_emulate_command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 9 +++------
1 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 98881c6..88a65c5 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -81,7 +81,7 @@ struct SCSIDiskState
};
static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
-static int scsi_disk_emulate_command(SCSIDiskReq *r);
+static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf);
static void scsi_free_request(SCSIRequest *req)
{
@@ -325,7 +325,6 @@ static void scsi_dma_restart_bh(void *opaque)
r = DO_UPCAST(SCSIDiskReq, req, req);
if (r->status & SCSI_REQ_STATUS_RETRY) {
int status = r->status;
- int ret;
r->status &=
~(SCSI_REQ_STATUS_RETRY | SCSI_REQ_STATUS_RETRY_TYPE_MASK);
@@ -338,10 +337,8 @@ static void scsi_dma_restart_bh(void *opaque)
scsi_write_data(&r->req);
break;
case SCSI_REQ_STATUS_RETRY_FLUSH:
- ret = scsi_disk_emulate_command(r);
- if (ret == 0) {
- scsi_req_complete(&r->req, GOOD);
- }
+ scsi_send_command(&r->req, r->req.cmd.buf);
+ break;
}
}
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 22/33] scsi-generic: drop SCSIGenericState
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (20 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 21/33] scsi-disk: fix retrying a flush Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 23/33] scsi-generic: remove scsi_req_fixup Paolo Bonzini
` (11 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
It is not needed, because s->bs is already stored in SCSIDevice, and
can be reached from the conf.bs member.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-generic.c | 86 +++++++++++++++++++++++------------------------------
1 files changed, 37 insertions(+), 49 deletions(-)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 8f6b70d..5206765 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -46,8 +46,6 @@ do { fprintf(stderr, "scsi-generic: " fmt , ## __VA_ARGS__); } while (0)
#define MAX_UINT ((unsigned int)-1)
#endif
-typedef struct SCSIGenericState SCSIGenericState;
-
typedef struct SCSIGenericReq {
SCSIRequest req;
uint8_t *buf;
@@ -56,12 +54,6 @@ typedef struct SCSIGenericReq {
sg_io_hdr_t io_header;
} SCSIGenericReq;
-struct SCSIGenericState
-{
- SCSIDevice qdev;
- BlockDriverState *bs;
-};
-
static void scsi_free_request(SCSIRequest *req)
{
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
@@ -174,7 +166,7 @@ static void scsi_read_complete(void * opaque, int ret)
static void scsi_read_data(SCSIRequest *req)
{
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, r->req.dev);
+ SCSIDevice *s = r->req.dev;
int ret;
DPRINTF("scsi_read_data 0x%x\n", req->tag);
@@ -183,17 +175,16 @@ static void scsi_read_data(SCSIRequest *req)
return;
}
- ret = execute_command(s->bs, r, SG_DXFER_FROM_DEV, scsi_read_complete);
+ ret = execute_command(s->conf.bs, r, SG_DXFER_FROM_DEV, scsi_read_complete);
if (ret < 0) {
scsi_command_complete(r, ret);
- return;
}
}
static void scsi_write_complete(void * opaque, int ret)
{
SCSIGenericReq *r = (SCSIGenericReq *)opaque;
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, r->req.dev);
+ SCSIDevice *s = r->req.dev;
DPRINTF("scsi_write_complete() ret = %d\n", ret);
r->req.aiocb = NULL;
@@ -204,9 +195,9 @@ static void scsi_write_complete(void * opaque, int ret)
}
if (r->req.cmd.buf[0] == MODE_SELECT && r->req.cmd.buf[4] == 12 &&
- s->qdev.type == TYPE_TAPE) {
- s->qdev.blocksize = (r->buf[9] << 16) | (r->buf[10] << 8) | r->buf[11];
- DPRINTF("block size %d\n", s->qdev.blocksize);
+ s->type == TYPE_TAPE) {
+ s->blocksize = (r->buf[9] << 16) | (r->buf[10] << 8) | r->buf[11];
+ DPRINTF("block size %d\n", s->blocksize);
}
scsi_command_complete(r, ret);
@@ -216,8 +207,8 @@ static void scsi_write_complete(void * opaque, int ret)
The transfer may complete asynchronously. */
static void scsi_write_data(SCSIRequest *req)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, req->dev);
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
+ SCSIDevice *s = r->req.dev;
int ret;
DPRINTF("scsi_write_data 0x%x\n", req->tag);
@@ -227,7 +218,7 @@ static void scsi_write_data(SCSIRequest *req)
return;
}
- ret = execute_command(s->bs, r, SG_DXFER_TO_DEV, scsi_write_complete);
+ ret = execute_command(s->conf.bs, r, SG_DXFER_TO_DEV, scsi_write_complete);
if (ret < 0) {
scsi_command_complete(r, ret);
}
@@ -261,8 +252,8 @@ static void scsi_req_fixup(SCSIRequest *req)
static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, req->dev);
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
+ SCSIDevice *s = r->req.dev;
int ret;
scsi_req_fixup(&r->req);
@@ -285,7 +276,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
g_free(r->buf);
r->buflen = 0;
r->buf = NULL;
- ret = execute_command(s->bs, r, SG_DXFER_NONE, scsi_command_complete);
+ ret = execute_command(s->conf.bs, r, SG_DXFER_NONE, scsi_command_complete);
if (ret < 0) {
scsi_command_complete(r, ret);
return 0;
@@ -373,77 +364,76 @@ static int get_stream_blocksize(BlockDriverState *bdrv)
static void scsi_generic_reset(DeviceState *dev)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev.qdev, dev);
+ SCSIDevice *s = DO_UPCAST(SCSIDevice, qdev, dev);
- scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
+ scsi_device_purge_requests(s, SENSE_CODE(RESET));
}
-static void scsi_destroy(SCSIDevice *d)
+static void scsi_destroy(SCSIDevice *s)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, d);
-
- scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
- blockdev_mark_auto_del(s->qdev.conf.bs);
+ scsi_device_purge_requests(s, SENSE_CODE(NO_SENSE));
+ blockdev_mark_auto_del(s->conf.bs);
}
-static int scsi_generic_initfn(SCSIDevice *dev)
+static int scsi_generic_initfn(SCSIDevice *s)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, dev);
int sg_version;
struct sg_scsi_id scsiid;
- if (!s->qdev.conf.bs) {
+ if (!s->conf.bs) {
error_report("scsi-generic: drive property not set");
return -1;
}
- s->bs = s->qdev.conf.bs;
/* check we are really using a /dev/sg* file */
- if (!bdrv_is_sg(s->bs)) {
+ if (!bdrv_is_sg(s->conf.bs)) {
error_report("scsi-generic: not /dev/sg*");
return -1;
}
- if (bdrv_get_on_error(s->bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
+ if (bdrv_get_on_error(s->conf.bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
error_report("Device doesn't support drive option werror");
return -1;
}
- if (bdrv_get_on_error(s->bs, 1) != BLOCK_ERR_REPORT) {
+ if (bdrv_get_on_error(s->conf.bs, 1) != BLOCK_ERR_REPORT) {
error_report("Device doesn't support drive option rerror");
return -1;
}
/* check we are using a driver managing SG_IO (version 3 and after */
- if (bdrv_ioctl(s->bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
+ if (bdrv_ioctl(s->conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
sg_version < 30000) {
error_report("scsi-generic: scsi generic interface too old");
return -1;
}
/* get LUN of the /dev/sg? */
- if (bdrv_ioctl(s->bs, SG_GET_SCSI_ID, &scsiid)) {
+ if (bdrv_ioctl(s->conf.bs, SG_GET_SCSI_ID, &scsiid)) {
error_report("scsi-generic: SG_GET_SCSI_ID ioctl failed");
return -1;
}
/* define device state */
- s->qdev.type = scsiid.scsi_type;
- DPRINTF("device type %d\n", s->qdev.type);
- if (s->qdev.type == TYPE_TAPE) {
- s->qdev.blocksize = get_stream_blocksize(s->bs);
- if (s->qdev.blocksize == -1)
- s->qdev.blocksize = 0;
+ s->type = scsiid.scsi_type;
+ DPRINTF("device type %d\n", s->type);
+ if (s->type == TYPE_TAPE) {
+ s->blocksize = get_stream_blocksize(s->conf.bs);
+ if (s->blocksize == -1) {
+ s->blocksize = 0;
+ }
} else {
- s->qdev.blocksize = get_blocksize(s->bs);
+ s->blocksize = get_blocksize(s->conf.bs);
/* removable media returns 0 if not present */
- if (s->qdev.blocksize <= 0) {
- if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM)
- s->qdev.blocksize = 2048;
- else
- s->qdev.blocksize = 512;
+ if (s->blocksize <= 0) {
+ if (s->type == TYPE_ROM || s->type == TYPE_WORM) {
+ s->blocksize = 2048;
+ } else {
+ s->blocksize = 512;
+ }
}
}
- DPRINTF("block size %d\n", s->qdev.blocksize);
+
+ DPRINTF("block size %d\n", s->blocksize);
return 0;
}
@@ -469,13 +457,13 @@ static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
static SCSIDeviceInfo scsi_generic_info = {
.qdev.name = "scsi-generic",
.qdev.desc = "pass through generic scsi device (/dev/sg*)",
- .qdev.size = sizeof(SCSIGenericState),
+ .qdev.size = sizeof(SCSIDevice),
.qdev.reset = scsi_generic_reset,
.init = scsi_generic_initfn,
.destroy = scsi_destroy,
.alloc_req = scsi_new_request,
.qdev.props = (Property[]) {
- DEFINE_BLOCK_PROPERTIES(SCSIGenericState, qdev.conf),
+ DEFINE_BLOCK_PROPERTIES(SCSIDevice, conf),
DEFINE_PROP_END_OF_LIST(),
},
};
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 23/33] scsi-generic: remove scsi_req_fixup
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (21 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 22/33] scsi-generic: drop SCSIGenericState Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 24/33] scsi-generic: check ioctl statuses when SG_IO succeeds Paolo Bonzini
` (10 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This is not needed anymore, since asynchronous ioctls were introduced
by commit 221f715 (new scsi-generic abstraction, use SG_IO, 2009-03-28).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-generic.c | 15 ---------------
1 files changed, 0 insertions(+), 15 deletions(-)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 5206765..5e2d4c0 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -232,19 +232,6 @@ static uint8_t *scsi_get_buf(SCSIRequest *req)
return r->buf;
}
-static void scsi_req_fixup(SCSIRequest *req)
-{
- switch(req->cmd.buf[0]) {
- case REWIND:
- case START_STOP:
- if (req->dev->type == TYPE_TAPE) {
- /* force IMMED, otherwise qemu waits end of command */
- req->cmd.buf[1] = 0x01;
- }
- break;
- }
-}
-
/* Execute a scsi command. Returns the length of the data expected by the
command. This will be Positive for data transfers from the device
(eg. disk reads), negative for transfers to the device (eg. disk writes),
@@ -256,8 +243,6 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
SCSIDevice *s = r->req.dev;
int ret;
- scsi_req_fixup(&r->req);
-
DPRINTF("Command: lun=%d tag=0x%x len %zd data=0x%02x", lun, tag,
r->req.cmd.xfer, cmd[0]);
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 24/33] scsi-generic: check ioctl statuses when SG_IO succeeds
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (22 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 23/33] scsi-generic: remove scsi_req_fixup Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 25/33] scsi-generic: look at host status Paolo Bonzini
` (9 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
A succeeding ioctl does not imply that the SCSI command succeeded.
Fix some braces along the way.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-generic.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 5e2d4c0..a5fc2ec 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -310,9 +310,9 @@ static int get_blocksize(BlockDriverState *bdrv)
io_header.timeout = 6000; /* XXX */
ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
- if (ret < 0)
+ if (ret < 0 || io_header.driver_status || io_header.host_status) {
return -1;
-
+ }
return (buf[4] << 24) | (buf[5] << 16) | (buf[6] << 8) | buf[7];
}
@@ -341,9 +341,9 @@ static int get_stream_blocksize(BlockDriverState *bdrv)
io_header.timeout = 6000; /* XXX */
ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
- if (ret < 0)
+ if (ret < 0 || io_header.driver_status || io_header.host_status) {
return -1;
-
+ }
return (buf[9] << 16) | (buf[10] << 8) | buf[11];
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 25/33] scsi-generic: look at host status
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (23 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 24/33] scsi-generic: check ioctl statuses when SG_IO succeeds Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 26/33] scsi-generic: snoop READ CAPACITY commands to get block size Paolo Bonzini
` (8 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Pass down the host status so that failing transport can be detected
by the guest. Similar treatment of host status could be done in
virtio-blk, too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-generic.c | 20 ++++++++++++++++----
1 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index a5fc2ec..bb82dc7 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -39,8 +39,13 @@ do { fprintf(stderr, "scsi-generic: " fmt , ## __VA_ARGS__); } while (0)
#define SCSI_SENSE_BUF_SIZE 96
-#define SG_ERR_DRIVER_TIMEOUT 0x06
-#define SG_ERR_DRIVER_SENSE 0x08
+#define SG_ERR_DRIVER_TIMEOUT 0x06
+#define SG_ERR_DRIVER_SENSE 0x08
+
+#define SG_ERR_DID_OK 0x00
+#define SG_ERR_DID_NO_CONNECT 0x01
+#define SG_ERR_DID_BUS_BUSY 0x02
+#define SG_ERR_DID_TIME_OUT 0x03
#ifndef MAX_UINT
#define MAX_UINT ((unsigned int)-1)
@@ -68,8 +73,9 @@ static void scsi_command_complete(void *opaque, int ret)
SCSIGenericReq *r = (SCSIGenericReq *)opaque;
r->req.aiocb = NULL;
- if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE)
+ if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) {
r->req.sense_len = r->io_header.sb_len_wr;
+ }
if (ret != 0) {
switch (ret) {
@@ -86,9 +92,15 @@ static void scsi_command_complete(void *opaque, int ret)
break;
}
} else {
- if (r->io_header.driver_status & SG_ERR_DRIVER_TIMEOUT) {
+ if (r->io_header.host_status == SG_ERR_DID_NO_CONNECT ||
+ r->io_header.host_status == SG_ERR_DID_BUS_BUSY ||
+ r->io_header.host_status == SG_ERR_DID_TIME_OUT ||
+ (r->io_header.driver_status & SG_ERR_DRIVER_TIMEOUT)) {
status = BUSY;
BADF("Driver Timeout\n");
+ } else if (r->io_header.host_status) {
+ status = CHECK_CONDITION;
+ scsi_req_build_sense(&r->req, SENSE_CODE(I_T_NEXUS_LOSS));
} else if (r->io_header.status) {
status = r->io_header.status;
} else if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) {
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 26/33] scsi-generic: snoop READ CAPACITY commands to get block size
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (24 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 25/33] scsi-generic: look at host status Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 27/33] scsi-disk: do not duplicate BlockDriverState member Paolo Bonzini
` (7 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Instead of "guessing" the block size when there is no medium in the
drive, wait for the guest to send a READ CAPACITY command and snoop
it from there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: keep a default blocksize value.
hw/scsi-generic.c | 35 +++++++++++++++++++++++++----------
1 files changed, 25 insertions(+), 10 deletions(-)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index bb82dc7..9fd1a6d 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -155,6 +155,7 @@ static int execute_command(BlockDriverState *bdrv,
static void scsi_read_complete(void * opaque, int ret)
{
SCSIGenericReq *r = (SCSIGenericReq *)opaque;
+ SCSIDevice *s = r->req.dev;
int len;
r->req.aiocb = NULL;
@@ -170,6 +171,15 @@ static void scsi_read_complete(void * opaque, int ret)
if (len == 0) {
scsi_command_complete(r, 0);
} else {
+ /* Snoop READ CAPACITY output to set the blocksize. */
+ if (r->req.cmd.buf[0] == READ_CAPACITY_10) {
+ s->blocksize = ldl_be_p(&r->buf[4]);
+ } else if (r->req.cmd.buf[0] == SERVICE_ACTION_IN_16 &&
+ (r->req.cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
+ s->blocksize = ldl_be_p(&r->buf[8]);
+ }
+ bdrv_set_buffer_alignment(s->conf.bs, s->blocksize);
+
scsi_req_data(&r->req, len);
}
}
@@ -308,36 +308,6 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
}
}
-static int get_blocksize(BlockDriverState *bdrv)
-{
- uint8_t cmd[10];
- uint8_t buf[8];
- uint8_t sensebuf[8];
- sg_io_hdr_t io_header;
- int ret;
-
- memset(cmd, 0, sizeof(cmd));
- memset(buf, 0, sizeof(buf));
- cmd[0] = READ_CAPACITY_10;
-
- memset(&io_header, 0, sizeof(io_header));
- io_header.interface_id = 'S';
- io_header.dxfer_direction = SG_DXFER_FROM_DEV;
- io_header.dxfer_len = sizeof(buf);
- io_header.dxferp = buf;
- io_header.cmdp = cmd;
- io_header.cmd_len = sizeof(cmd);
- io_header.mx_sb_len = sizeof(sensebuf);
- io_header.sbp = sensebuf;
- io_header.timeout = 6000; /* XXX */
-
- ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
- if (ret < 0 || io_header.driver_status || io_header.host_status) {
- return -1;
- }
- return (buf[4] << 24) | (buf[5] << 16) | (buf[6] << 8) | buf[7];
-}
-
static int get_stream_blocksize(BlockDriverState *bdrv)
{
uint8_t cmd[6];
@@ -413,21 +423,25 @@ static int scsi_generic_initfn(SCSIDevice *s)
/* define device state */
s->type = scsiid.scsi_type;
DPRINTF("device type %d\n", s->type);
- if (s->type == TYPE_TAPE) {
+ switch (s->type) {
+ case TYPE_TAPE:
s->blocksize = get_stream_blocksize(s->conf.bs);
if (s->blocksize == -1) {
s->blocksize = 0;
}
- } else {
- s->blocksize = get_blocksize(s->conf.bs);
- /* removable media returns 0 if not present */
- if (s->blocksize <= 0) {
- if (s->type == TYPE_ROM || s->type == TYPE_WORM) {
- s->blocksize = 2048;
- } else {
- s->blocksize = 512;
- }
- }
+ break;
+
+ /* Make a guess for block devices, we'll fix it when the guest sends.
+ * READ CAPACITY. If they don't, they likely would assume these sizes
+ * anyway. (TODO: they could also send MODE SENSE).
+ */
+ case TYPE_ROM:
+ case TYPE_WORM:
+ s->blocksize = 2048;
+ break;
+ default:
+ s->blocksize = 512;
+ break;
}
DPRINTF("block size %d\n", s->blocksize);
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 27/33] scsi-disk: do not duplicate BlockDriverState member
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (25 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 26/33] scsi-generic: snoop READ CAPACITY commands to get block size Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 28/33] scsi-disk: remove cluster_size Paolo Bonzini
` (6 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Same as for scsi-generic, avoid duplication even if it causes longer
lines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 92 +++++++++++++++++++++++++++----------------------------
1 files changed, 45 insertions(+), 47 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 88a65c5..46fbf1c 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -65,7 +65,6 @@ typedef struct SCSIDiskReq {
struct SCSIDiskState
{
SCSIDevice qdev;
- BlockDriverState *bs;
/* The qemu block layer uses a fixed 512 byte sector size.
This is the number of 512 byte blocks in a single scsi sector. */
int cluster_size;
@@ -119,7 +118,7 @@ static uint32_t scsi_init_iovec(SCSIDiskReq *r)
if (!r->iov.iov_base) {
r->buflen = SCSI_DMA_BUF_SIZE;
- r->iov.iov_base = qemu_blockalign(s->bs, r->buflen);
+ r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
}
r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
@@ -134,7 +133,7 @@ static void scsi_read_complete(void * opaque, int ret)
if (r->req.aiocb != NULL) {
r->req.aiocb = NULL;
- bdrv_acct_done(s->bs, &r->acct);
+ bdrv_acct_done(s->qdev.conf.bs, &r->acct);
}
if (ret) {
@@ -158,7 +157,7 @@ static void scsi_flush_complete(void * opaque, int ret)
if (r->req.aiocb != NULL) {
r->req.aiocb = NULL;
- bdrv_acct_done(s->bs, &r->acct);
+ bdrv_acct_done(s->qdev.conf.bs, &r->acct);
}
if (ret < 0) {
@@ -203,8 +202,8 @@ static void scsi_read_data(SCSIRequest *req)
scsi_read_complete(r, -ENOMEDIUM);
}
n = scsi_init_iovec(r);
- bdrv_acct_start(s->bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
- r->req.aiocb = bdrv_aio_readv(s->bs, r->sector, &r->qiov, n,
+ bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
+ r->req.aiocb = bdrv_aio_readv(s->qdev.conf.bs, r->sector, &r->qiov, n,
scsi_read_complete, r);
if (r->req.aiocb == NULL) {
scsi_read_complete(r, -EIO);
@@ -215,10 +214,10 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
{
int is_read = (type == SCSI_REQ_STATUS_RETRY_READ);
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
- BlockErrorAction action = bdrv_get_on_error(s->bs, is_read);
+ BlockErrorAction action = bdrv_get_on_error(s->qdev.conf.bs, is_read);
if (action == BLOCK_ERR_IGNORE) {
- bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
+ bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_IGNORE, is_read);
return 0;
}
@@ -228,9 +227,9 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
type &= SCSI_REQ_STATUS_RETRY_TYPE_MASK;
r->status |= SCSI_REQ_STATUS_RETRY | type;
- bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
+ bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_STOP, is_read);
vm_stop(RUN_STATE_IO_ERROR);
- bdrv_iostatus_set_err(s->bs, error);
+ bdrv_iostatus_set_err(s->qdev.conf.bs, error);
} else {
switch (error) {
case ENOMEDIUM:
@@ -246,7 +245,7 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
scsi_check_condition(r, SENSE_CODE(IO_ERROR));
break;
}
- bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
+ bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_REPORT, is_read);
}
return 1;
}
@@ -259,7 +258,7 @@ static void scsi_write_complete(void * opaque, int ret)
if (r->req.aiocb != NULL) {
r->req.aiocb = NULL;
- bdrv_acct_done(s->bs, &r->acct);
+ bdrv_acct_done(s->qdev.conf.bs, &r->acct);
}
if (ret) {
@@ -300,8 +299,8 @@ static void scsi_write_data(SCSIRequest *req)
if (s->tray_open) {
scsi_write_complete(r, -ENOMEDIUM);
}
- bdrv_acct_start(s->bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
- r->req.aiocb = bdrv_aio_writev(s->bs, r->sector, &r->qiov, n,
+ bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
+ r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, r->sector, &r->qiov, n,
scsi_write_complete, r);
if (r->req.aiocb == NULL) {
scsi_write_complete(r, -ENOMEM);
@@ -440,7 +439,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
case 0x83: /* Device identification page, mandatory */
{
int max_len = 255 - 8;
- int id_len = strlen(bdrv_get_device_name(s->bs));
+ int id_len = strlen(bdrv_get_device_name(s->qdev.conf.bs));
if (id_len > max_len) {
id_len = max_len;
@@ -454,7 +453,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
outbuf[buflen++] = 0; // reserved
outbuf[buflen++] = id_len; // length of data following
- memcpy(outbuf+buflen, bdrv_get_device_name(s->bs), id_len);
+ memcpy(outbuf+buflen, bdrv_get_device_name(s->qdev.conf.bs), id_len);
buflen += id_len;
break;
}
@@ -571,10 +570,10 @@ static inline bool media_is_dvd(SCSIDiskState *s)
if (s->qdev.type != TYPE_ROM) {
return false;
}
- if (!bdrv_is_inserted(s->bs)) {
+ if (!bdrv_is_inserted(s->qdev.conf.bs)) {
return false;
}
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
return nb_sectors > CD_MAX_SECTORS;
}
@@ -584,10 +583,10 @@ static inline bool media_is_cd(SCSIDiskState *s)
if (s->qdev.type != TYPE_ROM) {
return false;
}
- if (!bdrv_is_inserted(s->bs)) {
+ if (!bdrv_is_inserted(s->qdev.conf.bs)) {
return false;
}
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
return nb_sectors <= CD_MAX_SECTORS;
}
@@ -615,7 +614,7 @@ static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
}
if (format != 0xff) {
- if (s->tray_open || !bdrv_is_inserted(s->bs)) {
+ if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
return -1;
}
@@ -637,7 +636,7 @@ static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
if (layer != 0) {
goto fail;
}
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
outbuf[4] = 1; /* DVD-ROM, part version 1 */
outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
@@ -692,7 +691,7 @@ static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
media_status = 0;
if (s->tray_open) {
media_status = MS_TRAY_OPEN;
- } else if (bdrv_is_inserted(s->bs)) {
+ } else if (bdrv_is_inserted(s->qdev.conf.bs)) {
media_status = MS_MEDIA_PRESENT;
}
@@ -795,7 +794,7 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
[MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM),
};
- BlockDriverState *bdrv = s->bs;
+ BlockDriverState *bdrv = s->qdev.conf.bs;
int cylinders, heads, secs;
uint8_t *p = *p_outbuf;
@@ -887,7 +886,7 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
if (page_control == 1) { /* Changeable Values */
break;
}
- if (bdrv_enable_write_cache(s->bs)) {
+ if (bdrv_enable_write_cache(s->qdev.conf.bs)) {
p[2] = 4; /* WCE */
}
break;
@@ -959,7 +958,7 @@ static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
memset(outbuf, 0, r->req.cmd.xfer);
p = outbuf;
- if (bdrv_is_read_only(s->bs)) {
+ if (bdrv_is_read_only(s->qdev.conf.bs)) {
dev_specific_param = 0x80; /* Readonly. */
} else {
dev_specific_param = 0x00;
@@ -977,7 +976,7 @@ static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
p += 8;
}
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
if (!dbd && nb_sectors) {
if (r->req.cmd.buf[0] == MODE_SENSE) {
outbuf[3] = 8; /* Block descriptor length */
@@ -1043,7 +1042,7 @@ static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
msf = req->cmd.buf[1] & 2;
format = req->cmd.buf[2] & 0xf;
start_track = req->cmd.buf[6];
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
nb_sectors /= s->cluster_size;
switch (format) {
@@ -1080,12 +1079,12 @@ static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
if (s->qdev.type == TYPE_ROM && loej) {
if (!start && !s->tray_open && s->tray_locked) {
scsi_check_condition(r,
- bdrv_is_inserted(s->bs)
+ bdrv_is_inserted(s->qdev.conf.bs)
? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
: SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
return -1;
}
- bdrv_eject(s->bs, !start);
+ bdrv_eject(s->qdev.conf.bs, !start);
s->tray_open = !start;
}
return 0;
@@ -1112,13 +1111,13 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
goto illegal_request;
}
r->buflen = MAX(4096, req->cmd.xfer);
- r->iov.iov_base = qemu_blockalign(s->bs, r->buflen);
+ r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
}
outbuf = r->iov.iov_base;
switch (req->cmd.buf[0]) {
case TEST_UNIT_READY:
- if (s->tray_open || !bdrv_is_inserted(s->bs)) {
+ if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
goto not_ready;
}
break;
@@ -1168,12 +1167,12 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
break;
case ALLOW_MEDIUM_REMOVAL:
s->tray_locked = req->cmd.buf[4] & 1;
- bdrv_lock_medium(s->bs, req->cmd.buf[4] & 1);
+ bdrv_lock_medium(s->qdev.conf.bs, req->cmd.buf[4] & 1);
break;
case READ_CAPACITY_10:
/* The normal LEN field for this command is zero. */
memset(outbuf, 0, 8);
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
if (!nb_sectors) {
goto not_ready;
}
@@ -1228,7 +1227,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
DPRINTF("SAI READ CAPACITY(16)\n");
memset(outbuf, 0, req->cmd.xfer);
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
if (!nb_sectors) {
goto not_ready;
}
@@ -1275,7 +1274,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
return buflen;
not_ready:
- if (s->tray_open || !bdrv_is_inserted(s->bs)) {
+ if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
} else {
scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
@@ -1342,8 +1341,8 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
r->iov.iov_len = rc;
break;
case SYNCHRONIZE_CACHE:
- bdrv_acct_start(s->bs, &r->acct, 0, BDRV_ACCT_FLUSH);
- r->req.aiocb = bdrv_aio_flush(s->bs, scsi_flush_complete, r);
+ bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
+ r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_flush_complete, r);
if (r->req.aiocb == NULL) {
scsi_flush_complete(r, -EIO);
}
@@ -1418,7 +1417,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
goto fail;
}
- rc = bdrv_discard(s->bs, r->req.cmd.lba * s->cluster_size,
+ rc = bdrv_discard(s->qdev.conf.bs, r->req.cmd.lba * s->cluster_size,
len * s->cluster_size);
if (rc < 0) {
/* XXX: better error code ?*/
@@ -1460,7 +1459,7 @@ static void scsi_disk_reset(DeviceState *dev)
scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
- bdrv_get_geometry(s->bs, &nb_sectors);
+ bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
nb_sectors /= s->cluster_size;
if (nb_sectors) {
nb_sectors--;
@@ -1530,16 +1529,15 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
error_report("scsi-disk: drive property not set");
return -1;
}
- s->bs = s->qdev.conf.bs;
- if (scsi_type == TYPE_DISK && !bdrv_is_inserted(s->bs)) {
+ if (scsi_type == TYPE_DISK && !bdrv_is_inserted(s->qdev.conf.bs)) {
error_report("Device needs media, but drive is empty");
return -1;
}
if (!s->serial) {
/* try to fall back to value set with legacy -drive serial=... */
- dinfo = drive_get_by_blockdev(s->bs);
+ dinfo = drive_get_by_blockdev(s->qdev.conf.bs);
if (*dinfo->serial) {
s->serial = g_strdup(dinfo->serial);
}
@@ -1549,13 +1547,13 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
s->version = g_strdup(QEMU_VERSION);
}
- if (bdrv_is_sg(s->bs)) {
+ if (bdrv_is_sg(s->qdev.conf.bs)) {
error_report("scsi-disk: unwanted /dev/sg*");
return -1;
}
if (scsi_type == TYPE_ROM) {
- bdrv_set_dev_ops(s->bs, &scsi_cd_block_ops, s);
+ bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_cd_block_ops, s);
s->qdev.blocksize = 2048;
} else if (scsi_type == TYPE_DISK) {
s->qdev.blocksize = s->qdev.conf.logical_block_size;
@@ -1564,11 +1562,11 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
return -1;
}
s->cluster_size = s->qdev.blocksize / 512;
- bdrv_set_buffer_alignment(s->bs, s->qdev.blocksize);
+ bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
s->qdev.type = scsi_type;
qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
- bdrv_iostatus_enable(s->bs);
+ bdrv_iostatus_enable(s->qdev.conf.bs);
add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, ",0");
return 0;
}
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 28/33] scsi-disk: remove cluster_size
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (26 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 27/33] scsi-disk: do not duplicate BlockDriverState member Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 29/33] scsi-disk: small clean up to INQUIRY Paolo Bonzini
` (5 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This field is redundant, and having it makes it more complicated
to share reqops between the upcoming scsi-block and scsi-generic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
v1->v2: do not assume blocksize may be zero, since other
things would break
hw/scsi-disk.c | 35 ++++++++++++++++-------------------
1 files changed, 16 insertions(+), 19 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 46fbf1c..1c74a00 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -65,9 +65,6 @@ typedef struct SCSIDiskReq {
struct SCSIDiskState
{
SCSIDevice qdev;
- /* The qemu block layer uses a fixed 512 byte sector size.
- This is the number of 512 byte blocks in a single scsi sector. */
- int cluster_size;
uint32_t removable;
uint64_t max_lba;
bool media_changed;
@@ -854,7 +851,7 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
p[4] = heads & 0xff;
p[5] = secs & 0xff;
- p[6] = s->cluster_size * 2;
+ p[6] = s->qdev.blocksize >> 8;
p[8] = (cylinders >> 8) & 0xff;
p[9] = cylinders & 0xff;
/* Write precomp start cylinder, disabled */
@@ -983,7 +980,7 @@ static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
} else { /* MODE_SENSE_10 */
outbuf[7] = 8; /* Block descriptor length */
}
- nb_sectors /= s->cluster_size;
+ nb_sectors /= (s->qdev.blocksize / 512);
if (nb_sectors > 0xffffff) {
nb_sectors = 0;
}
@@ -993,7 +990,7 @@ static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
p[3] = nb_sectors & 0xff;
p[4] = 0; /* reserved */
p[5] = 0; /* bytes 5-7 are the sector size in bytes */
- p[6] = s->cluster_size * 2;
+ p[6] = s->qdev.blocksize >> 8;
p[7] = 0;
p += 8;
}
@@ -1044,7 +1041,7 @@ static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
start_track = req->cmd.buf[6];
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
- nb_sectors /= s->cluster_size;
+ nb_sectors /= s->qdev.blocksize / 512;
switch (format) {
case 0:
toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
@@ -1179,7 +1176,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
goto illegal_request;
}
- nb_sectors /= s->cluster_size;
+ nb_sectors /= s->qdev.blocksize / 512;
/* Returned value is the address of the last sector. */
nb_sectors--;
/* Remember the new size for read/write sanity checking. */
@@ -1194,7 +1191,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
outbuf[3] = nb_sectors & 0xff;
outbuf[4] = 0;
outbuf[5] = 0;
- outbuf[6] = s->cluster_size * 2;
+ outbuf[6] = s->qdev.blocksize >> 8;
outbuf[7] = 0;
buflen = 8;
break;
@@ -1234,7 +1231,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
goto illegal_request;
}
- nb_sectors /= s->cluster_size;
+ nb_sectors /= s->qdev.blocksize / 512;
/* Returned value is the address of the last sector. */
nb_sectors--;
/* Remember the new size for read/write sanity checking. */
@@ -1249,7 +1246,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
outbuf[7] = nb_sectors & 0xff;
outbuf[8] = 0;
outbuf[9] = 0;
- outbuf[10] = s->cluster_size * 2;
+ outbuf[10] = s->qdev.blocksize >> 8;
outbuf[11] = 0;
outbuf[12] = 0;
outbuf[13] = get_physical_block_exp(&s->qdev.conf);
@@ -1356,8 +1353,8 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
if (r->req.cmd.lba > s->max_lba) {
goto illegal_lba;
}
- r->sector = r->req.cmd.lba * s->cluster_size;
- r->sector_count = len * s->cluster_size;
+ r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
+ r->sector_count = len * (s->qdev.blocksize / 512);
break;
case WRITE_6:
case WRITE_10:
@@ -1373,8 +1370,8 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
if (r->req.cmd.lba > s->max_lba) {
goto illegal_lba;
}
- r->sector = r->req.cmd.lba * s->cluster_size;
- r->sector_count = len * s->cluster_size;
+ r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
+ r->sector_count = len * (s->qdev.blocksize / 512);
break;
case MODE_SELECT:
DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
@@ -1417,8 +1414,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
goto fail;
}
- rc = bdrv_discard(s->qdev.conf.bs, r->req.cmd.lba * s->cluster_size,
- len * s->cluster_size);
+ rc = bdrv_discard(s->qdev.conf.bs,
+ r->req.cmd.lba * (s->qdev.blocksize / 512),
+ len * (s->qdev.blocksize / 512));
if (rc < 0) {
/* XXX: better error code ?*/
goto fail;
@@ -1460,7 +1458,7 @@ static void scsi_disk_reset(DeviceState *dev)
scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
- nb_sectors /= s->cluster_size;
+ nb_sectors /= s->qdev.blocksize / 512;
if (nb_sectors) {
nb_sectors--;
}
@@ -1561,7 +1559,6 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
error_report("scsi-disk: Unhandled SCSI type %02x", scsi_type);
return -1;
}
- s->cluster_size = s->qdev.blocksize / 512;
bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
s->qdev.type = scsi_type;
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 29/33] scsi-disk: small clean up to INQUIRY
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (27 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 28/33] scsi-disk: remove cluster_size Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 30/33] scsi: move max_lba to SCSIDevice Paolo Bonzini
` (4 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Set s->removable, s->qdev.blocksize and s->qdev.type in the callers
of scsi_initfn.
With this in place, s->qdev.type is allowed, and we can just reuse it
as the first byte in VPD data (just like we do in standard INQUIRY data).
Also set s->removable is set consistently and we can use it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 46 +++++++++++++++++++++-------------------------
1 files changed, 21 insertions(+), 25 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 1c74a00..723fffe 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -381,11 +381,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
return -1;
}
- if (s->qdev.type == TYPE_ROM) {
- outbuf[buflen++] = 5;
- } else {
- outbuf[buflen++] = 0;
- }
+ outbuf[buflen++] = s->qdev.type & 0x1f;
outbuf[buflen++] = page_code ; // this page
outbuf[buflen++] = 0x00;
@@ -529,11 +525,10 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
memset(outbuf, 0, buflen);
outbuf[0] = s->qdev.type & 0x1f;
+ outbuf[1] = s->removable ? 0x80 : 0;
if (s->qdev.type == TYPE_ROM) {
- outbuf[1] = 0x80;
memcpy(&outbuf[16], "QEMU CD-ROM ", 16);
} else {
- outbuf[1] = s->removable ? 0x80 : 0;
memcpy(&outbuf[16], "QEMU HARDDISK ", 16);
}
memcpy(&outbuf[8], "QEMU ", 8);
@@ -1518,7 +1513,7 @@ static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
}
}
-static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
+static int scsi_initfn(SCSIDevice *dev)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
DriveInfo *dinfo;
@@ -1528,7 +1523,7 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
return -1;
}
- if (scsi_type == TYPE_DISK && !bdrv_is_inserted(s->qdev.conf.bs)) {
+ if (!s->removable && !bdrv_is_inserted(s->qdev.conf.bs)) {
error_report("Device needs media, but drive is empty");
return -1;
}
@@ -1550,18 +1545,11 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
return -1;
}
- if (scsi_type == TYPE_ROM) {
+ if (s->removable) {
bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_cd_block_ops, s);
- s->qdev.blocksize = 2048;
- } else if (scsi_type == TYPE_DISK) {
- s->qdev.blocksize = s->qdev.conf.logical_block_size;
- } else {
- error_report("scsi-disk: Unhandled SCSI type %02x", scsi_type);
- return -1;
}
bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
- s->qdev.type = scsi_type;
qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
bdrv_iostatus_enable(s->qdev.conf.bs);
add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, ",0");
@@ -1570,27 +1558,35 @@ static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
static int scsi_hd_initfn(SCSIDevice *dev)
{
- return scsi_initfn(dev, TYPE_DISK);
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
+ s->qdev.blocksize = s->qdev.conf.logical_block_size;
+ s->qdev.type = TYPE_DISK;
+ return scsi_initfn(&s->qdev);
}
static int scsi_cd_initfn(SCSIDevice *dev)
{
- return scsi_initfn(dev, TYPE_ROM);
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
+ s->qdev.blocksize = 2048;
+ s->qdev.type = TYPE_ROM;
+ s->removable = true;
+ return scsi_initfn(&s->qdev);
}
static int scsi_disk_initfn(SCSIDevice *dev)
{
DriveInfo *dinfo;
- uint8_t scsi_type;
if (!dev->conf.bs) {
- scsi_type = TYPE_DISK; /* will die in scsi_initfn() */
- } else {
- dinfo = drive_get_by_blockdev(dev->conf.bs);
- scsi_type = dinfo->media_cd ? TYPE_ROM : TYPE_DISK;
+ return scsi_initfn(dev); /* ... and die there */
}
- return scsi_initfn(dev, scsi_type);
+ dinfo = drive_get_by_blockdev(dev->conf.bs);
+ if (dinfo->media_cd) {
+ return scsi_cd_initfn(dev);
+ } else {
+ return scsi_hd_initfn(dev);
+ }
}
static SCSIReqOps scsi_disk_reqops = {
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 30/33] scsi: move max_lba to SCSIDevice
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (28 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 29/33] scsi-disk: small clean up to INQUIRY Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 31/33] scsi: make reqops const Paolo Bonzini
` (3 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
The field is only in scsi-disk for now. Moving it up to SCSIDevice makes
it easier to reuse the scsi-generic reqops elsewhere.
At the same time, make scsi-generic get max_lba from snooped READ CAPACITY
commands as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-disk.c | 15 +++++++--------
hw/scsi-generic.c | 2 ++
hw/scsi.h | 1 +
3 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 723fffe..4544f1c 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -66,7 +66,6 @@ struct SCSIDiskState
{
SCSIDevice qdev;
uint32_t removable;
- uint64_t max_lba;
bool media_changed;
bool media_event;
QEMUBH *bh;
@@ -1175,7 +1174,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
/* Returned value is the address of the last sector. */
nb_sectors--;
/* Remember the new size for read/write sanity checking. */
- s->max_lba = nb_sectors;
+ s->qdev.max_lba = nb_sectors;
/* Clip to 2TB, instead of returning capacity modulo 2TB. */
if (nb_sectors > UINT32_MAX) {
nb_sectors = UINT32_MAX;
@@ -1230,7 +1229,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
/* Returned value is the address of the last sector. */
nb_sectors--;
/* Remember the new size for read/write sanity checking. */
- s->max_lba = nb_sectors;
+ s->qdev.max_lba = nb_sectors;
outbuf[0] = (nb_sectors >> 56) & 0xff;
outbuf[1] = (nb_sectors >> 48) & 0xff;
outbuf[2] = (nb_sectors >> 40) & 0xff;
@@ -1345,7 +1344,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case READ_16:
len = r->req.cmd.xfer / s->qdev.blocksize;
DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
- if (r->req.cmd.lba > s->max_lba) {
+ if (r->req.cmd.lba > s->qdev.max_lba) {
goto illegal_lba;
}
r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
@@ -1362,7 +1361,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
(command & 0xe) == 0xe ? "And Verify " : "",
r->req.cmd.lba, len);
- if (r->req.cmd.lba > s->max_lba) {
+ if (r->req.cmd.lba > s->qdev.max_lba) {
goto illegal_lba;
}
r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
@@ -1388,7 +1387,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case SEEK_10:
DPRINTF("Seek(%d) (sector %" PRId64 ")\n", command == SEEK_6 ? 6 : 10,
r->req.cmd.lba);
- if (r->req.cmd.lba > s->max_lba) {
+ if (r->req.cmd.lba > s->qdev.max_lba) {
goto illegal_lba;
}
break;
@@ -1398,7 +1397,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
r->req.cmd.lba, len);
- if (r->req.cmd.lba > s->max_lba) {
+ if (r->req.cmd.lba > s->qdev.max_lba) {
goto illegal_lba;
}
@@ -1457,7 +1456,7 @@ static void scsi_disk_reset(DeviceState *dev)
if (nb_sectors) {
nb_sectors--;
}
- s->max_lba = nb_sectors;
+ s->qdev.max_lba = nb_sectors;
}
static void scsi_destroy(SCSIDevice *dev)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 9fd1a6d..9e293ee 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -174,9 +174,11 @@ static void scsi_read_complete(void * opaque, int ret)
/* Snoop READ CAPACITY output to set the blocksize. */
if (r->req.cmd.buf[0] == READ_CAPACITY_10) {
s->blocksize = ldl_be_p(&r->buf[4]);
+ s->max_lba = ldl_be_p(&r->buf[0]);
} else if (r->req.cmd.buf[0] == SERVICE_ACTION_IN_16 &&
(r->req.cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
s->blocksize = ldl_be_p(&r->buf[8]);
+ s->max_lba = ldq_be_p(&r->buf[0]);
}
bdrv_set_buffer_alignment(s->conf.bs, s->blocksize);
diff --git a/hw/scsi.h b/hw/scsi.h
index c8649cf..d56e875 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -70,6 +70,7 @@ struct SCSIDevice
uint32_t lun;
int blocksize;
int type;
+ uint64_t max_lba;
};
/* cdrom.c */
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 31/33] scsi: make reqops const
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (29 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 30/33] scsi: move max_lba to SCSIDevice Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 32/33] scsi: export scsi_generic_reqops Paolo Bonzini
` (2 subsequent siblings)
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Also delete a stale occurrence of SCSIReqOps inside SCSIDeviceInfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-bus.c | 10 +++++-----
hw/scsi-disk.c | 2 +-
hw/scsi-generic.c | 2 +-
hw/scsi.h | 7 +++----
4 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index bdd6e94..252e903 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -160,7 +160,7 @@ static int32_t scsi_invalid_command(SCSIRequest *req, uint8_t *buf)
return 0;
}
-struct SCSIReqOps reqops_invalid_opcode = {
+static const struct SCSIReqOps reqops_invalid_opcode = {
.size = sizeof(SCSIRequest),
.send_command = scsi_invalid_command
};
@@ -178,7 +178,7 @@ static int32_t scsi_unit_attention(SCSIRequest *req, uint8_t *buf)
return 0;
}
-struct SCSIReqOps reqops_unit_attention = {
+static const struct SCSIReqOps reqops_unit_attention = {
.size = sizeof(SCSIRequest),
.send_command = scsi_unit_attention
};
@@ -386,7 +386,7 @@ static uint8_t *scsi_target_get_buf(SCSIRequest *req)
return r->buf;
}
-struct SCSIReqOps reqops_target_command = {
+static const struct SCSIReqOps reqops_target_command = {
.size = sizeof(SCSITargetReq),
.send_command = scsi_target_send_command,
.read_data = scsi_target_read_data,
@@ -394,8 +394,8 @@ struct SCSIReqOps reqops_target_command = {
};
-SCSIRequest *scsi_req_alloc(SCSIReqOps *reqops, SCSIDevice *d, uint32_t tag,
- uint32_t lun, void *hba_private)
+SCSIRequest *scsi_req_alloc(const SCSIReqOps *reqops, SCSIDevice *d,
+ uint32_t tag, uint32_t lun, void *hba_private)
{
SCSIRequest *req;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 4544f1c..b308f2a 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1588,7 +1588,7 @@ static int scsi_disk_initfn(SCSIDevice *dev)
}
}
-static SCSIReqOps scsi_disk_reqops = {
+static const SCSIReqOps scsi_disk_reqops = {
.size = sizeof(SCSIDiskReq),
.free_req = scsi_free_request,
.send_command = scsi_send_command,
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 9e293ee..7fe9b0d 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -449,7 +449,7 @@ static int scsi_generic_initfn(SCSIDevice *s)
return 0;
}
-static SCSIReqOps scsi_generic_req_ops = {
+static const SCSIReqOps scsi_generic_req_ops = {
.size = sizeof(SCSIGenericReq),
.free_req = scsi_free_request,
.send_command = scsi_send_command,
diff --git a/hw/scsi.h b/hw/scsi.h
index d56e875..af558c3 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -41,7 +41,7 @@ struct SCSICommand {
struct SCSIRequest {
SCSIBus *bus;
SCSIDevice *dev;
- SCSIReqOps *ops;
+ const SCSIReqOps *ops;
uint32_t refcount;
uint32_t tag;
uint32_t lun;
@@ -96,7 +96,6 @@ struct SCSIDeviceInfo {
SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
void *hba_private);
void (*unit_attention_reported)(SCSIDevice *s);
- SCSIReqOps reqops;
};
struct SCSIBusInfo {
@@ -176,8 +175,8 @@ extern const struct SCSISense sense_code_DEVICE_INTERNAL_RESET;
int scsi_sense_valid(SCSISense sense);
-SCSIRequest *scsi_req_alloc(SCSIReqOps *reqops, SCSIDevice *d, uint32_t tag,
- uint32_t lun, void *hba_private);
+SCSIRequest *scsi_req_alloc(const SCSIReqOps *reqops, SCSIDevice *d,
+ uint32_t tag, uint32_t lun, void *hba_private);
SCSIRequest *scsi_req_new(SCSIDevice *d, uint32_t tag, uint32_t lun,
uint8_t *buf, void *hba_private);
int32_t scsi_req_enqueue(SCSIRequest *req);
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 32/33] scsi: export scsi_generic_reqops
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (30 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 31/33] scsi: make reqops const Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 33/33] scsi: pass cdb to alloc_req Paolo Bonzini
2011-10-27 11:45 ` [Qemu-devel] ping Re: [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-generic.c | 2 +-
hw/scsi.h | 3 +++
2 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 7fe9b0d..5e0d6a4 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -449,7 +449,7 @@ static int scsi_generic_initfn(SCSIDevice *s)
return 0;
}
-static const SCSIReqOps scsi_generic_req_ops = {
+const SCSIReqOps scsi_generic_req_ops = {
.size = sizeof(SCSIGenericReq),
.free_req = scsi_free_request,
.send_command = scsi_send_command,
diff --git a/hw/scsi.h b/hw/scsi.h
index af558c3..01c6655 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -197,4 +197,7 @@ void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense);
int scsi_device_get_sense(SCSIDevice *dev, uint8_t *buf, int len, bool fixed);
SCSIDevice *scsi_device_find(SCSIBus *bus, int channel, int target, int lun);
+/* scsi-generic.c. */
+extern const SCSIReqOps scsi_generic_req_ops;
+
#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] [PATCH v2 33/33] scsi: pass cdb to alloc_req
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (31 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 32/33] scsi: export scsi_generic_reqops Paolo Bonzini
@ 2011-10-25 10:40 ` Paolo Bonzini
2011-10-27 11:45 ` [Qemu-devel] ping Re: [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-25 10:40 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf
This will let scsi-block choose between passthrough and emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-bus.c | 2 +-
hw/scsi-disk.c | 4 ++--
hw/scsi-generic.c | 2 +-
hw/scsi.h | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 252e903..72c0dd2 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -451,7 +451,7 @@ SCSIRequest *scsi_req_new(SCSIDevice *d, uint32_t tag, uint32_t lun,
req = scsi_req_alloc(&reqops_target_command, d, tag, lun,
hba_private);
} else {
- req = d->info->alloc_req(d, tag, lun, hba_private);
+ req = d->info->alloc_req(d, tag, lun, buf, hba_private);
}
}
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index b308f2a..3d2c77c 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1598,8 +1598,8 @@ static const SCSIReqOps scsi_disk_reqops = {
.get_buf = scsi_get_buf,
};
-static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag,
- uint32_t lun, void *hba_private)
+static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
+ uint8_t *buf, void *hba_private)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
SCSIRequest *req;
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 5e0d6a4..81671e3 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -460,7 +460,7 @@ const SCSIReqOps scsi_generic_req_ops = {
};
static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
- void *hba_private)
+ uint8_t *buf, void *hba_private)
{
SCSIRequest *req;
diff --git a/hw/scsi.h b/hw/scsi.h
index 01c6655..8ea744a 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -94,7 +94,7 @@ struct SCSIDeviceInfo {
scsi_qdev_initfn init;
void (*destroy)(SCSIDevice *s);
SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
- void *hba_private);
+ uint8_t *buf, void *hba_private);
void (*unit_attention_reported)(SCSIDevice *s);
};
--
1.7.6
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [Qemu-devel] ping Re: [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
` (32 preceding siblings ...)
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 33/33] scsi: pass cdb to alloc_req Paolo Bonzini
@ 2011-10-27 11:45 ` Paolo Bonzini
33 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2011-10-27 11:45 UTC (permalink / raw)
To: qemu-devel
On 10/25/2011 12:40 PM, Paolo Bonzini wrote:
> Kevin,
>
> The following changes since commit 952e849c150b4f1b89f8728cba00f925c1d6e75b:
>
> Merge remote-tracking branch 'bonzini/split-main-loop-for-anthony' into staging (2011-10-24 10:51:12 -0500)
>
> are available in the git repository at:
>
> git://github.com/bonzini/qemu.git scsi-for-kevin
>
> All comments from you have been addressed. I'll send separately patches
> that require a new review.
>
> v1->v2:
> - rebased
> - various fixes noted in individual patches
> - dropped patches 20, 21, 35
> - added a separate patch to fix preexisting coding style issues
>
> Paolo Bonzini (33):
> scsi: pass correct sense code for ENOMEDIUM
> atapi/scsi: unify definitions for MMC
> atapi: move GESN definitions to scsi-defs.h
> atapi: cleanup/fix mode sense results
> scsi: notify the device when unit attention is reported
> scsi-disk: report media changed via unit attention sense codes
> scsi-disk: fix coding style issues (braces)
> scsi-disk: add stubs for more MMC commands
> scsi-disk: store valid mode pages in a table
> atapi/scsi-disk: make mode page values coherent between the two
> scsi-disk: support DVD profile in GET CONFIGURATION
> scsi-disk: support READ DVD STRUCTURE
> scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION
> scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo)
> qdev: switch children device list to QTAILQ
> scsi: remove devs array from SCSIBus
> scsi: implement REPORT LUNS for arbitrary LUNs
> scsi: allow arbitrary LUNs
> scsi: add channel to addressing
> scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0
> scsi-disk: fix retrying a flush
> scsi-generic: drop SCSIGenericState
> scsi-generic: remove scsi_req_fixup
> scsi-generic: check ioctl statuses when SG_IO succeeds
> scsi-generic: look at host status
> scsi-generic: snoop READ CAPACITY commands to get block size
> scsi-disk: do not duplicate BlockDriverState member
> scsi-disk: remove cluster_size
> scsi-disk: small clean up to INQUIRY
> scsi: move max_lba to SCSIDevice
> scsi: make reqops const
> scsi: export scsi_generic_reqops
> scsi: pass cdb to alloc_req
>
> hw/acpi_piix4.c | 4 +-
> hw/esp.c | 16 +-
> hw/i2c.c | 2 +-
> hw/ide/atapi.c | 119 ++++------
> hw/ide/core.c | 4 +-
> hw/ide/internal.h | 71 +------
> hw/ide/macio.c | 2 +-
> hw/intel-hda.c | 6 +-
> hw/lsi53c895a.c | 30 +--
> hw/qdev.c | 24 +-
> hw/qdev.h | 4 +-
> hw/s390-virtio-bus.c | 4 +-
> hw/scsi-bus.c | 204 ++++++++++++-----
> hw/scsi-defs.h | 90 ++++++++
> hw/scsi-disk.c | 604 +++++++++++++++++++++++++++++++++++++-------------
> hw/scsi-generic.c | 154 +++++++-------
> hw/scsi.h | 33 ++-
> hw/spapr_vio.c | 6 +-
> hw/spapr_vscsi.c | 54 ++++-
> hw/ssi.c | 6 +-
> hw/usb-msd.c | 8 +-
> 21 files changed, 931 insertions(+), 514 deletions(-)
>
Ping?
Paolo
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION Paolo Bonzini
@ 2012-01-25 16:34 ` Artyom Tarasenko
2012-01-25 17:03 ` Paolo Bonzini
0 siblings, 1 reply; 41+ messages in thread
From: Artyom Tarasenko @ 2012-01-25 16:34 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: kwolf, Blue Swirl, qemu-devel
This patch produces the following error when booting Solaris/SPARC:
WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000
(esp0):
data transfer overrun: current esp state:
esp: State=DATA Last State=DATA_DONE
esp: Latched stat=0x91<IPND,XZERO,IO> intr=0x10<BUS> fifo 0x0
esp: last msg out: IDENTIFY; last msg in: COMMAND COMPLETE
esp: DMA csr=0xa4240030<FLSH,INTEN>
esp: addr=fc005860 dmacnt=0 last=fc005858 last_cnt=8
esp: Cmd dump for Target 6 Lun 0:
esp: cdblen=10, cdb=[ 0x46 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x8 0x0 ]
esp: pkt_state=0xf<XFER,CMD,SEL,ARB> pkt_flags=0x10000
pkt_statistics=0x0
esp: cmd_flags=0x462 cmd_timeout=60
Particularly it seems that Solaris is not happy with respose length
>8. Any idea, why?
$ sparc-softmmu/qemu-system-sparc -bios ~/ss5-170.bin -m 32 -nographic
-drive if=scsi,unit=6,media=cdrom,file=~/Solaris9cd1.iso
On 10/25/11, Paolo Bonzini <pbonzini@redhat.com> wrote:
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> v1->v2: fix comment for outbuf[8]-outbuf[19]
>
> hw/scsi-disk.c | 50 ++++++++++++++++++++++++++++++++++++++++++--------
> 1 files changed, 42 insertions(+), 8 deletions(-)
>
> diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
> index 8f25e29..69af2e3 100644
> --- a/hw/scsi-disk.c
> +++ b/hw/scsi-disk.c
> @@ -567,6 +567,19 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req,
> uint8_t *outbuf)
> return buflen;
> }
>
> +static inline bool media_is_dvd(SCSIDiskState *s)
> +{
> + uint64_t nb_sectors;
> + if (s->qdev.type != TYPE_ROM) {
> + return false;
> + }
> + if (!bdrv_is_inserted(s->bs)) {
> + return false;
> + }
> + bdrv_get_geometry(s->bs, &nb_sectors);
> + return nb_sectors > CD_MAX_SECTORS;
> +}
> +
> static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
> uint8_t *outbuf)
> {
> @@ -581,17 +594,38 @@ static int
> scsi_get_event_status_notification(SCSIDiskState *s,
> return -1;
> }
>
> -static int scsi_get_configuration(SCSIDiskState *s, SCSIDiskReq *r,
> - uint8_t *outbuf)
> +static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
> {
> + int current;
> +
> if (s->qdev.type != TYPE_ROM) {
> return -1;
> }
> - memset(outbuf, 0, 8);
> - /* ??? This should probably return much more information. For now
> - just return the basic header indicating the CD-ROM profile. */
> - outbuf[7] = 8; /* CD-ROM */
> - return 8;
> + current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
> + memset(outbuf, 0, 40);
> + stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
> + stw_be_p(&outbuf[6], current);
> + /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
> + outbuf[10] = 0x03; /* persistent, current */
> + outbuf[11] = 8; /* two profiles */
> + stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
> + outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
> + stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
> + outbuf[18] = (current == MMC_PROFILE_CD_ROM);
> + /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
> + stw_be_p(&outbuf[20], 1);
> + outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
> + outbuf[23] = 8;
> + stl_be_p(&outbuf[24], 1); /* SCSI */
> + outbuf[28] = 1; /* DBE = 1, mandatory */
> + /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
> + stw_be_p(&outbuf[32], 3);
> + outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
> + outbuf[35] = 4;
> + outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup,
> lock=1 */
> + /* TODO: Random readable, CD read, DVD read, drive serial number,
> + power management */
> + return 40;
> }
>
> static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
> @@ -1024,7 +1058,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
> }
> break;
> case GET_CONFIGURATION:
> - buflen = scsi_get_configuration(s, r, outbuf);
> + buflen = scsi_get_configuration(s, outbuf);
> if (buflen < 0) {
> goto illegal_request;
> }
> --
> 1.7.6
>
>
>
>
--
Regards,
Artyom Tarasenko
solaris/sparc under qemu blog: http://tyom.blogspot.com/search/label/qemu
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION
2012-01-25 16:34 ` Artyom Tarasenko
@ 2012-01-25 17:03 ` Paolo Bonzini
2012-01-25 20:13 ` Artyom Tarasenko
0 siblings, 1 reply; 41+ messages in thread
From: Paolo Bonzini @ 2012-01-25 17:03 UTC (permalink / raw)
To: Artyom Tarasenko; +Cc: kwolf, Blue Swirl, qemu-devel
On 01/25/2012 05:34 PM, Artyom Tarasenko wrote:
> This patch produces the following error when booting Solaris/SPARC:
>
> WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000
> (esp0):
> data transfer overrun: current esp state:
> esp: State=DATA Last State=DATA_DONE
> esp: Latched stat=0x91<IPND,XZERO,IO> intr=0x10<BUS> fifo 0x0
> esp: last msg out: IDENTIFY; last msg in: COMMAND COMPLETE
> esp: DMA csr=0xa4240030<FLSH,INTEN>
> esp: addr=fc005860 dmacnt=0 last=fc005858 last_cnt=8
> esp: Cmd dump for Target 6 Lun 0:
> esp: cdblen=10, cdb=[ 0x46 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x8 0x0 ]
> esp: pkt_state=0xf<XFER,CMD,SEL,ARB> pkt_flags=0x10000
> pkt_statistics=0x0
> esp: cmd_flags=0x462 cmd_timeout=60
>
> Particularly it seems that Solaris is not happy with respose length
>> 8. Any idea, why?
>
> $ sparc-softmmu/qemu-system-sparc -bios ~/ss5-170.bin -m 32 -nographic
> -drive if=scsi,unit=6,media=cdrom,file=~/Solaris9cd1.iso
From a quick look, it's the same bug that was reported recently on
INQUIRY commands.
Paolo
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION
2012-01-25 17:03 ` Paolo Bonzini
@ 2012-01-25 20:13 ` Artyom Tarasenko
2012-01-26 8:09 ` Paolo Bonzini
0 siblings, 1 reply; 41+ messages in thread
From: Artyom Tarasenko @ 2012-01-25 20:13 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: kwolf, Blue Swirl, qemu-devel
On 1/25/12, Paolo Bonzini <pbonzini@redhat.com> wrote:
> On 01/25/2012 05:34 PM, Artyom Tarasenko wrote:
>> This patch produces the following error when booting Solaris/SPARC:
>>
>> WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000
>> (esp0):
>> data transfer overrun: current esp state:
>> esp: State=DATA Last State=DATA_DONE
>> esp: Latched stat=0x91<IPND,XZERO,IO> intr=0x10<BUS> fifo 0x0
>> esp: last msg out: IDENTIFY; last msg in: COMMAND COMPLETE
>> esp: DMA csr=0xa4240030<FLSH,INTEN>
>> esp: addr=fc005860 dmacnt=0 last=fc005858 last_cnt=8
>> esp: Cmd dump for Target 6 Lun 0:
>> esp: cdblen=10, cdb=[ 0x46 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x8 0x0
>> ]
>> esp: pkt_state=0xf<XFER,CMD,SEL,ARB> pkt_flags=0x10000
>> pkt_statistics=0x0
>> esp: cmd_flags=0x462 cmd_timeout=60
>>
>> Particularly it seems that Solaris is not happy with respose length
>>> 8. Any idea, why?
>>
>> $ sparc-softmmu/qemu-system-sparc -bios ~/ss5-170.bin -m 32 -nographic
>> -drive if=scsi,unit=6,media=cdrom,file=~/Solaris9cd1.iso
>
> From a quick look, it's the same bug that was reported recently on
> INQUIRY commands.
If you need I can provide more input.
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION
2012-01-25 20:13 ` Artyom Tarasenko
@ 2012-01-26 8:09 ` Paolo Bonzini
2012-01-26 8:23 ` ronnie sahlberg
0 siblings, 1 reply; 41+ messages in thread
From: Paolo Bonzini @ 2012-01-26 8:09 UTC (permalink / raw)
To: Artyom Tarasenko; +Cc: kwolf, Blue Swirl, qemu-devel
On 01/25/2012 09:13 PM, Artyom Tarasenko wrote:
> On 1/25/12, Paolo Bonzini<pbonzini@redhat.com> wrote:
>> On 01/25/2012 05:34 PM, Artyom Tarasenko wrote:
>>> This patch produces the following error when booting Solaris/SPARC:
>>>
>>> WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000
>>> (esp0):
>>> data transfer overrun: current esp state:
>>> esp: State=DATA Last State=DATA_DONE
>>> esp: Latched stat=0x91<IPND,XZERO,IO> intr=0x10<BUS> fifo 0x0
>>> esp: last msg out: IDENTIFY; last msg in: COMMAND COMPLETE
>>> esp: DMA csr=0xa4240030<FLSH,INTEN>
>>> esp: addr=fc005860 dmacnt=0 last=fc005858 last_cnt=8
>>> esp: Cmd dump for Target 6 Lun 0:
>>> esp: cdblen=10, cdb=[ 0x46 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x8 0x0
>>> ]
>>> esp: pkt_state=0xf<XFER,CMD,SEL,ARB> pkt_flags=0x10000
>>> pkt_statistics=0x0
>>> esp: cmd_flags=0x462 cmd_timeout=60
>>>
>>> Particularly it seems that Solaris is not happy with respose length
>>>> 8. Any idea, why?
The response length is not 8, it is 40; but Solaris only expected 8 (see
the CDB in the error dump).
>>> $ sparc-softmmu/qemu-system-sparc -bios ~/ss5-170.bin -m 32 -nographic
>>> -drive if=scsi,unit=6,media=cdrom,file=~/Solaris9cd1.iso
>>
>> From a quick look, it's the same bug that was reported recently on
>> INQUIRY commands.
>
> If you need I can provide more input.
You can test http://article.gmane.org/gmane.comp.emulators.qemu/133434
if you have time.
Paolo
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION
2012-01-26 8:09 ` Paolo Bonzini
@ 2012-01-26 8:23 ` ronnie sahlberg
2012-01-26 8:51 ` Paolo Bonzini
0 siblings, 1 reply; 41+ messages in thread
From: ronnie sahlberg @ 2012-01-26 8:23 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: qemu-devel
Hi Paolo, List,
I see you are very active in the MMC emulation for qemu.
I have written several MMC emulators, the third of which (in STGT) is
open source.
I did the MMC emulation in STGT, (see README.mmc for how to use it as
"blank burnable media")
Do you have DVD+/-R + morhping implemented yet?
STGT has a feature where once an initiator has finished "burning" a
new image to a "blank" disk
where STGT automagically morphs the LUN from being profile:dvd+/-r
to be profile:dvd-rom
to indicate it is no longer a blank burnable disk but a readonly
disk containing an iso.
Would that be of interest to you or the community? It is a few
thousand lines of semi-trivial code to port but nothing
that hairy.
Im happy to port it to qemu if there is need/desire/interest for it.
There was a bug in STGT that made it impossible to build a virtual
jukebox with writeable/burnable media for about 6 months and no one
noticed, so maybe not too many people use such features :-(
regards
ronnie sahlberg
On Thu, Jan 26, 2012 at 7:09 PM, Paolo Bonzini <pbonzini@redhat.com> wrote:
> On 01/25/2012 09:13 PM, Artyom Tarasenko wrote:
>>
>> On 1/25/12, Paolo Bonzini<pbonzini@redhat.com> wrote:
>>>
>>> On 01/25/2012 05:34 PM, Artyom Tarasenko wrote:
>>>>
>>>> This patch produces the following error when booting Solaris/SPARC:
>>>>
>>>> WARNING:
>>>> /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000
>>>> (esp0):
>>>> data transfer overrun: current esp state:
>>>> esp: State=DATA Last State=DATA_DONE
>>>> esp: Latched stat=0x91<IPND,XZERO,IO> intr=0x10<BUS> fifo
>>>> 0x0
>>>> esp: last msg out: IDENTIFY; last msg in: COMMAND COMPLETE
>>>> esp: DMA csr=0xa4240030<FLSH,INTEN>
>>>> esp: addr=fc005860 dmacnt=0 last=fc005858 last_cnt=8
>>>> esp: Cmd dump for Target 6 Lun 0:
>>>> esp: cdblen=10, cdb=[ 0x46 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x8
>>>> 0x0
>>>> ]
>>>> esp: pkt_state=0xf<XFER,CMD,SEL,ARB> pkt_flags=0x10000
>>>> pkt_statistics=0x0
>>>> esp: cmd_flags=0x462 cmd_timeout=60
>>>>
>>>> Particularly it seems that Solaris is not happy with respose length
>>>>>
>>>>> 8. Any idea, why?
>
>
> The response length is not 8, it is 40; but Solaris only expected 8 (see the
> CDB in the error dump).
>
>
>>>> $ sparc-softmmu/qemu-system-sparc -bios ~/ss5-170.bin -m 32 -nographic
>>>> -drive if=scsi,unit=6,media=cdrom,file=~/Solaris9cd1.iso
>>>
>>>
>>> From a quick look, it's the same bug that was reported recently on
>>> INQUIRY commands.
>>
>>
>> If you need I can provide more input.
>
>
> You can test http://article.gmane.org/gmane.comp.emulators.qemu/133434 if
> you have time.
>
> Paolo
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION
2012-01-26 8:23 ` ronnie sahlberg
@ 2012-01-26 8:51 ` Paolo Bonzini
0 siblings, 0 replies; 41+ messages in thread
From: Paolo Bonzini @ 2012-01-26 8:51 UTC (permalink / raw)
To: ronnie sahlberg; +Cc: qemu-devel, Thomas Schmitt
On 01/26/2012 09:23 AM, ronnie sahlberg wrote:
> I see you are very active in the MMC emulation for qemu.
Not really, beyond fixing bugs.
> I have written several MMC emulators, the third of which (in STGT) is
> open source.
>
> I did the MMC emulation in STGT, (see README.mmc for how to use it as
> "blank burnable media")
>
> Do you have DVD+/-R + morhping implemented yet?
We do not implement MMC emulation beyond CD-ROM/DVD-ROM. In particular,
burning is only supported to SCSI passthrough devices right now.
Right now, the main problem we have with MMC passthrough is how to force
the host to "see" the new medium when burning terminates. This would be
of interest also to people that write CD burning software (Thomas CCed).
Do you have any clue about that?
Paolo
^ permalink raw reply [flat|nested] 41+ messages in thread
end of thread, other threads:[~2012-01-26 8:51 UTC | newest]
Thread overview: 41+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 01/33] scsi: pass correct sense code for ENOMEDIUM Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 02/33] atapi/scsi: unify definitions for MMC Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 03/33] atapi: move GESN definitions to scsi-defs.h Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 04/33] atapi: cleanup/fix mode sense results Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 05/33] scsi: notify the device when unit attention is reported Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 06/33] scsi-disk: report media changed via unit attention sense codes Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 07/33] scsi-disk: fix coding style issues (braces) Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 08/33] scsi-disk: add stubs for more MMC commands Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 09/33] scsi-disk: store valid mode pages in a table Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 10/33] atapi/scsi-disk: make mode page values coherent between the two Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION Paolo Bonzini
2012-01-25 16:34 ` Artyom Tarasenko
2012-01-25 17:03 ` Paolo Bonzini
2012-01-25 20:13 ` Artyom Tarasenko
2012-01-26 8:09 ` Paolo Bonzini
2012-01-26 8:23 ` ronnie sahlberg
2012-01-26 8:51 ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 12/33] scsi-disk: support READ DVD STRUCTURE Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 13/33] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 14/33] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 15/33] qdev: switch children device list to QTAILQ Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 16/33] scsi: remove devs array from SCSIBus Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 17/33] scsi: implement REPORT LUNS for arbitrary LUNs Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 18/33] scsi: allow " Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 19/33] scsi: add channel to addressing Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 20/33] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 21/33] scsi-disk: fix retrying a flush Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 22/33] scsi-generic: drop SCSIGenericState Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 23/33] scsi-generic: remove scsi_req_fixup Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 24/33] scsi-generic: check ioctl statuses when SG_IO succeeds Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 25/33] scsi-generic: look at host status Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 26/33] scsi-generic: snoop READ CAPACITY commands to get block size Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 27/33] scsi-disk: do not duplicate BlockDriverState member Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 28/33] scsi-disk: remove cluster_size Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 29/33] scsi-disk: small clean up to INQUIRY Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 30/33] scsi: move max_lba to SCSIDevice Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 31/33] scsi: make reqops const Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 32/33] scsi: export scsi_generic_reqops Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 33/33] scsi: pass cdb to alloc_req Paolo Bonzini
2011-10-27 11:45 ` [Qemu-devel] ping Re: [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).