qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PATCH v2 08/33] scsi-disk: add stubs for more MMC commands
Date: Tue, 25 Oct 2011 12:40:16 +0200	[thread overview]
Message-ID: <1319539241-26436-9-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1319539241-26436-1-git-send-email-pbonzini@redhat.com>

This patch adds a few stub implementations for MMC commands to
scsi-disk, to be filled in later in the series.  It also adds to
scsi-defs.h constants for commands implemented by ide/atapi.c,
when missing.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
	v1->v2: coding style (braces)

 hw/scsi-defs.h |    3 ++
 hw/scsi-disk.c |   67 +++++++++++++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 65 insertions(+), 5 deletions(-)

diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index 5e6c9b7..d0a467a 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -113,6 +113,7 @@
 #define READ_12               0xa8
 #define WRITE_12              0xaa
 #define SERVICE_ACTION_IN_12  0xab
+#define READ_DVD_STRUCTURE    0xad
 #define WRITE_VERIFY_12       0xae
 #define VERIFY_12             0xaf
 #define SEARCH_HIGH_12        0xb0
@@ -122,6 +123,8 @@
 #define SEND_VOLUME_TAG       0xb6
 #define READ_DEFECT_DATA_12   0xb7
 #define SET_CD_SPEED          0xbb
+#define MECHANISM_STATUS      0xbd
+#define READ_CD               0xbe
 
 /*
  * SERVICE ACTION IN subcodes
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 3a08848..0557ede 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -567,6 +567,43 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
     return buflen;
 }
 
+static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
+                                   uint8_t *outbuf)
+{
+    scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+    return -1;
+}
+
+static int scsi_get_event_status_notification(SCSIDiskState *s,
+                                              SCSIDiskReq *r, uint8_t *outbuf)
+{
+    scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+    return -1;
+}
+
+static int scsi_get_configuration(SCSIDiskState *s, SCSIDiskReq *r,
+                                  uint8_t *outbuf)
+{
+    if (s->qdev.type != TYPE_ROM) {
+        return -1;
+    }
+    memset(outbuf, 0, 8);
+    /* ??? This should probably return much more information.  For now
+       just return the basic header indicating the CD-ROM profile.  */
+    outbuf[7] = 8; /* CD-ROM */
+    return 8;
+}
+
+static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
+{
+    if (s->qdev.type != TYPE_ROM) {
+        return -1;
+    }
+    memset(outbuf, 0, 8);
+    outbuf[5] = 1; /* CD-ROM */
+    return 8;
+}
+
 static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
                            int page_control)
 {
@@ -964,12 +1001,29 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
         outbuf[7] = 0;
         buflen = 8;
         break;
+    case MECHANISM_STATUS:
+        buflen = scsi_emulate_mechanism_status(s, outbuf);
+        if (buflen < 0) {
+            goto illegal_request;
+        }
+        break;
     case GET_CONFIGURATION:
-        memset(outbuf, 0, 8);
-        /* ??? This should probably return much more information.  For now
-           just return the basic header indicating the CD-ROM profile.  */
-        outbuf[7] = 8; // CD-ROM
-        buflen = 8;
+        buflen = scsi_get_configuration(s, r, outbuf);
+        if (buflen < 0) {
+            goto illegal_request;
+        }
+        break;
+    case GET_EVENT_STATUS_NOTIFICATION:
+        buflen = scsi_get_event_status_notification(s, r, outbuf);
+        if (buflen < 0) {
+            goto illegal_request;
+        }
+        break;
+    case READ_DVD_STRUCTURE:
+        buflen = scsi_read_dvd_structure(s, r, outbuf);
+        if (buflen < 0) {
+            goto illegal_request;
+        }
         break;
     case SERVICE_ACTION_IN_16:
         /* Service Action In subcommands. */
@@ -1073,7 +1127,10 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
     case ALLOW_MEDIUM_REMOVAL:
     case READ_CAPACITY_10:
     case READ_TOC:
+    case READ_DVD_STRUCTURE:
     case GET_CONFIGURATION:
+    case GET_EVENT_STATUS_NOTIFICATION:
+    case MECHANISM_STATUS:
     case SERVICE_ACTION_IN_16:
     case VERIFY_10:
         rc = scsi_disk_emulate_command(r);
-- 
1.7.6

  parent reply	other threads:[~2011-10-25 10:41 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-25 10:40 [Qemu-devel] [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 01/33] scsi: pass correct sense code for ENOMEDIUM Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 02/33] atapi/scsi: unify definitions for MMC Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 03/33] atapi: move GESN definitions to scsi-defs.h Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 04/33] atapi: cleanup/fix mode sense results Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 05/33] scsi: notify the device when unit attention is reported Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 06/33] scsi-disk: report media changed via unit attention sense codes Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 07/33] scsi-disk: fix coding style issues (braces) Paolo Bonzini
2011-10-25 10:40 ` Paolo Bonzini [this message]
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 09/33] scsi-disk: store valid mode pages in a table Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 10/33] atapi/scsi-disk: make mode page values coherent between the two Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 11/33] scsi-disk: support DVD profile in GET CONFIGURATION Paolo Bonzini
2012-01-25 16:34   ` Artyom Tarasenko
2012-01-25 17:03     ` Paolo Bonzini
2012-01-25 20:13       ` Artyom Tarasenko
2012-01-26  8:09         ` Paolo Bonzini
2012-01-26  8:23           ` ronnie sahlberg
2012-01-26  8:51             ` Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 12/33] scsi-disk: support READ DVD STRUCTURE Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 13/33] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 14/33] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 15/33] qdev: switch children device list to QTAILQ Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 16/33] scsi: remove devs array from SCSIBus Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 17/33] scsi: implement REPORT LUNS for arbitrary LUNs Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 18/33] scsi: allow " Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 19/33] scsi: add channel to addressing Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 20/33] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 21/33] scsi-disk: fix retrying a flush Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 22/33] scsi-generic: drop SCSIGenericState Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 23/33] scsi-generic: remove scsi_req_fixup Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 24/33] scsi-generic: check ioctl statuses when SG_IO succeeds Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 25/33] scsi-generic: look at host status Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 26/33] scsi-generic: snoop READ CAPACITY commands to get block size Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 27/33] scsi-disk: do not duplicate BlockDriverState member Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 28/33] scsi-disk: remove cluster_size Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 29/33] scsi-disk: small clean up to INQUIRY Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 30/33] scsi: move max_lba to SCSIDevice Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 31/33] scsi: make reqops const Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 32/33] scsi: export scsi_generic_reqops Paolo Bonzini
2011-10-25 10:40 ` [Qemu-devel] [PATCH v2 33/33] scsi: pass cdb to alloc_req Paolo Bonzini
2011-10-27 11:45 ` [Qemu-devel] ping Re: [PULL v2 00/33] SCSI changes for 1.0, part 1 of 2 Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1319539241-26436-9-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).