From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 25/55] scsi-disk: add stubs for more MMC commands
Date: Mon, 31 Oct 2011 14:30:00 +0100 [thread overview]
Message-ID: <1320067830-12093-26-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1320067830-12093-1-git-send-email-kwolf@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a few stub implementations for MMC commands to
scsi-disk, to be filled in later in the series. It also adds to
scsi-defs.h constants for commands implemented by ide/atapi.c,
when missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/scsi-defs.h | 3 ++
hw/scsi-disk.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++----
2 files changed, 65 insertions(+), 5 deletions(-)
diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index 5e6c9b7..d0a467a 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -113,6 +113,7 @@
#define READ_12 0xa8
#define WRITE_12 0xaa
#define SERVICE_ACTION_IN_12 0xab
+#define READ_DVD_STRUCTURE 0xad
#define WRITE_VERIFY_12 0xae
#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
@@ -122,6 +123,8 @@
#define SEND_VOLUME_TAG 0xb6
#define READ_DEFECT_DATA_12 0xb7
#define SET_CD_SPEED 0xbb
+#define MECHANISM_STATUS 0xbd
+#define READ_CD 0xbe
/*
* SERVICE ACTION IN subcodes
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 3a08848..bdb98ef 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -567,6 +567,43 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
return buflen;
}
+static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
+ uint8_t *outbuf)
+{
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return -1;
+}
+
+static int scsi_get_event_status_notification(SCSIDiskState *s,
+ SCSIDiskReq *r, uint8_t *outbuf)
+{
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return -1;
+}
+
+static int scsi_get_configuration(SCSIDiskState *s, SCSIDiskReq *r,
+ uint8_t *outbuf)
+{
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ memset(outbuf, 0, 8);
+ /* ??? This should probably return much more information. For now
+ just return the basic header indicating the CD-ROM profile. */
+ outbuf[7] = 8; /* CD-ROM */
+ return 8;
+}
+
+static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
+{
+ if (s->qdev.type != TYPE_ROM) {
+ return -1;
+ }
+ memset(outbuf, 0, 8);
+ outbuf[5] = 1; /* CD-ROM */
+ return 8;
+}
+
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
int page_control)
{
@@ -964,12 +1001,29 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
outbuf[7] = 0;
buflen = 8;
break;
+ case MECHANISM_STATUS:
+ buflen = scsi_emulate_mechanism_status(s, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
case GET_CONFIGURATION:
- memset(outbuf, 0, 8);
- /* ??? This should probably return much more information. For now
- just return the basic header indicating the CD-ROM profile. */
- outbuf[7] = 8; // CD-ROM
- buflen = 8;
+ buflen = scsi_get_configuration(s, r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case GET_EVENT_STATUS_NOTIFICATION:
+ buflen = scsi_get_event_status_notification(s, r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case READ_DVD_STRUCTURE:
+ buflen = scsi_read_dvd_structure(s, r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
break;
case SERVICE_ACTION_IN_16:
/* Service Action In subcommands. */
@@ -1073,7 +1127,10 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case ALLOW_MEDIUM_REMOVAL:
case READ_CAPACITY_10:
case READ_TOC:
+ case READ_DVD_STRUCTURE:
case GET_CONFIGURATION:
+ case GET_EVENT_STATUS_NOTIFICATION:
+ case MECHANISM_STATUS:
case SERVICE_ACTION_IN_16:
case VERIFY_10:
rc = scsi_disk_emulate_command(r);
--
1.7.6.4
next prev parent reply other threads:[~2011-10-31 13:28 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-31 13:29 [Qemu-devel] [PULL 00/55] Block patches Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 01/55] iSCSI block driver Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 02/55] Documentation: Add iSCSI section Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 03/55] Teach block/vdi about "discarded" (no longer allocated) blocks Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 04/55] qcow2: fix some errors and typo in qcow2.txt Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 05/55] block: Remove dead code Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 06/55] block: Fix bdrv_open use after free Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 07/55] qcow: Fix bdrv_write_compressed error handling Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 08/55] ide: Fix off-by-one error in array index check Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 09/55] vmdk: Fix use of uninitialised value Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 10/55] vmdk: Improve error handling Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 11/55] vmdk: Fix possible segfaults Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 12/55] Documentation: Describe NBD URL syntax Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 13/55] block: fix qcow2_co_flush deadlock Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 14/55] qemu-io: delete bs instead of leaking it Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 15/55] block: set bs->read_only before .bdrv_open() Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 16/55] block: reinitialize across bdrv_close()/bdrv_open() Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 17/55] Documentation: Add syntax for using sheepdog devices Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 18/55] scsi: pass correct sense code for ENOMEDIUM Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 19/55] atapi/scsi: unify definitions for MMC Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 20/55] atapi: move GESN definitions to scsi-defs.h Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 21/55] atapi: cleanup/fix mode sense results Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 22/55] scsi: notify the device when unit attention is reported Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 23/55] scsi-disk: report media changed via unit attention sense codes Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 24/55] scsi-disk: fix coding style issues (braces) Kevin Wolf
2011-10-31 13:30 ` Kevin Wolf [this message]
2011-10-31 13:30 ` [Qemu-devel] [PATCH 26/55] scsi-disk: store valid mode pages in a table Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 27/55] atapi/scsi-disk: make mode page values coherent between the two Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 28/55] scsi-disk: support DVD profile in GET CONFIGURATION Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 29/55] scsi-disk: support READ DVD STRUCTURE Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 30/55] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 31/55] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 32/55] qdev: switch children device list to QTAILQ Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 33/55] scsi: remove devs array from SCSIBus Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 34/55] scsi: implement REPORT LUNS for arbitrary LUNs Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 35/55] scsi: allow " Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 36/55] scsi: add channel to addressing Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 37/55] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 38/55] scsi-disk: fix retrying a flush Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 39/55] scsi-generic: drop SCSIGenericState Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 40/55] scsi-generic: remove scsi_req_fixup Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 41/55] scsi-generic: check ioctl statuses when SG_IO succeeds Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 42/55] scsi-generic: look at host status Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 43/55] scsi-generic: snoop READ CAPACITY commands to get block size Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 44/55] scsi-disk: do not duplicate BlockDriverState member Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 45/55] scsi-disk: remove cluster_size Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 46/55] scsi-disk: small clean up to INQUIRY Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 47/55] scsi: move max_lba to SCSIDevice Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 48/55] scsi: make reqops const Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 49/55] scsi: export scsi_generic_reqops Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 50/55] scsi: pass cdb to alloc_req Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 51/55] scsi: do not call transfer_data after canceling a request Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 52/55] scsi-disk: bump SCSIRequest reference count until aio completion runs Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 53/55] scsi-generic: " Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 54/55] scsi: push request restart to SCSIDevice Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 55/55] scsi-disk: add scsi-block for device passthrough Kevin Wolf
2011-10-31 16:52 ` [Qemu-devel] [PULL 00/55] Block patches Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320067830-12093-26-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).