From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 39/55] scsi-generic: drop SCSIGenericState
Date: Mon, 31 Oct 2011 14:30:14 +0100 [thread overview]
Message-ID: <1320067830-12093-40-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1320067830-12093-1-git-send-email-kwolf@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
It is not needed, because s->bs is already stored in SCSIDevice, and
can be reached from the conf.bs member.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/scsi-generic.c | 90 +++++++++++++++++++++++-----------------------------
1 files changed, 40 insertions(+), 50 deletions(-)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 8f6b70d..4af0f24 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -46,8 +46,6 @@ do { fprintf(stderr, "scsi-generic: " fmt , ## __VA_ARGS__); } while (0)
#define MAX_UINT ((unsigned int)-1)
#endif
-typedef struct SCSIGenericState SCSIGenericState;
-
typedef struct SCSIGenericReq {
SCSIRequest req;
uint8_t *buf;
@@ -56,12 +54,6 @@ typedef struct SCSIGenericReq {
sg_io_hdr_t io_header;
} SCSIGenericReq;
-struct SCSIGenericState
-{
- SCSIDevice qdev;
- BlockDriverState *bs;
-};
-
static void scsi_free_request(SCSIRequest *req)
{
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
@@ -174,7 +166,7 @@ static void scsi_read_complete(void * opaque, int ret)
static void scsi_read_data(SCSIRequest *req)
{
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, r->req.dev);
+ SCSIDevice *s = r->req.dev;
int ret;
DPRINTF("scsi_read_data 0x%x\n", req->tag);
@@ -183,17 +175,16 @@ static void scsi_read_data(SCSIRequest *req)
return;
}
- ret = execute_command(s->bs, r, SG_DXFER_FROM_DEV, scsi_read_complete);
+ ret = execute_command(s->conf.bs, r, SG_DXFER_FROM_DEV, scsi_read_complete);
if (ret < 0) {
scsi_command_complete(r, ret);
- return;
}
}
static void scsi_write_complete(void * opaque, int ret)
{
SCSIGenericReq *r = (SCSIGenericReq *)opaque;
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, r->req.dev);
+ SCSIDevice *s = r->req.dev;
DPRINTF("scsi_write_complete() ret = %d\n", ret);
r->req.aiocb = NULL;
@@ -204,9 +195,9 @@ static void scsi_write_complete(void * opaque, int ret)
}
if (r->req.cmd.buf[0] == MODE_SELECT && r->req.cmd.buf[4] == 12 &&
- s->qdev.type == TYPE_TAPE) {
- s->qdev.blocksize = (r->buf[9] << 16) | (r->buf[10] << 8) | r->buf[11];
- DPRINTF("block size %d\n", s->qdev.blocksize);
+ s->type == TYPE_TAPE) {
+ s->blocksize = (r->buf[9] << 16) | (r->buf[10] << 8) | r->buf[11];
+ DPRINTF("block size %d\n", s->blocksize);
}
scsi_command_complete(r, ret);
@@ -216,8 +207,8 @@ static void scsi_write_complete(void * opaque, int ret)
The transfer may complete asynchronously. */
static void scsi_write_data(SCSIRequest *req)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, req->dev);
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
+ SCSIDevice *s = r->req.dev;
int ret;
DPRINTF("scsi_write_data 0x%x\n", req->tag);
@@ -227,7 +218,7 @@ static void scsi_write_data(SCSIRequest *req)
return;
}
- ret = execute_command(s->bs, r, SG_DXFER_TO_DEV, scsi_write_complete);
+ ret = execute_command(s->conf.bs, r, SG_DXFER_TO_DEV, scsi_write_complete);
if (ret < 0) {
scsi_command_complete(r, ret);
}
@@ -261,8 +252,8 @@ static void scsi_req_fixup(SCSIRequest *req)
static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, req->dev);
SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
+ SCSIDevice *s = r->req.dev;
int ret;
scsi_req_fixup(&r->req);
@@ -285,7 +276,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
g_free(r->buf);
r->buflen = 0;
r->buf = NULL;
- ret = execute_command(s->bs, r, SG_DXFER_NONE, scsi_command_complete);
+ ret = execute_command(s->conf.bs, r, SG_DXFER_NONE, scsi_command_complete);
if (ret < 0) {
scsi_command_complete(r, ret);
return 0;
@@ -373,77 +364,76 @@ static int get_stream_blocksize(BlockDriverState *bdrv)
static void scsi_generic_reset(DeviceState *dev)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev.qdev, dev);
+ SCSIDevice *s = DO_UPCAST(SCSIDevice, qdev, dev);
- scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
+ scsi_device_purge_requests(s, SENSE_CODE(RESET));
}
-static void scsi_destroy(SCSIDevice *d)
+static void scsi_destroy(SCSIDevice *s)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, d);
-
- scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
- blockdev_mark_auto_del(s->qdev.conf.bs);
+ scsi_device_purge_requests(s, SENSE_CODE(NO_SENSE));
+ blockdev_mark_auto_del(s->conf.bs);
}
-static int scsi_generic_initfn(SCSIDevice *dev)
+static int scsi_generic_initfn(SCSIDevice *s)
{
- SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, dev);
int sg_version;
struct sg_scsi_id scsiid;
- if (!s->qdev.conf.bs) {
+ if (!s->conf.bs) {
error_report("scsi-generic: drive property not set");
return -1;
}
- s->bs = s->qdev.conf.bs;
/* check we are really using a /dev/sg* file */
- if (!bdrv_is_sg(s->bs)) {
+ if (!bdrv_is_sg(s->conf.bs)) {
error_report("scsi-generic: not /dev/sg*");
return -1;
}
- if (bdrv_get_on_error(s->bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
+ if (bdrv_get_on_error(s->conf.bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
error_report("Device doesn't support drive option werror");
return -1;
}
- if (bdrv_get_on_error(s->bs, 1) != BLOCK_ERR_REPORT) {
+ if (bdrv_get_on_error(s->conf.bs, 1) != BLOCK_ERR_REPORT) {
error_report("Device doesn't support drive option rerror");
return -1;
}
/* check we are using a driver managing SG_IO (version 3 and after */
- if (bdrv_ioctl(s->bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
+ if (bdrv_ioctl(s->conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
sg_version < 30000) {
error_report("scsi-generic: scsi generic interface too old");
return -1;
}
/* get LUN of the /dev/sg? */
- if (bdrv_ioctl(s->bs, SG_GET_SCSI_ID, &scsiid)) {
+ if (bdrv_ioctl(s->conf.bs, SG_GET_SCSI_ID, &scsiid)) {
error_report("scsi-generic: SG_GET_SCSI_ID ioctl failed");
return -1;
}
/* define device state */
- s->qdev.type = scsiid.scsi_type;
- DPRINTF("device type %d\n", s->qdev.type);
- if (s->qdev.type == TYPE_TAPE) {
- s->qdev.blocksize = get_stream_blocksize(s->bs);
- if (s->qdev.blocksize == -1)
- s->qdev.blocksize = 0;
+ s->type = scsiid.scsi_type;
+ DPRINTF("device type %d\n", s->type);
+ if (s->type == TYPE_TAPE) {
+ s->blocksize = get_stream_blocksize(s->conf.bs);
+ if (s->blocksize == -1) {
+ s->blocksize = 0;
+ }
} else {
- s->qdev.blocksize = get_blocksize(s->bs);
+ s->blocksize = get_blocksize(s->conf.bs);
/* removable media returns 0 if not present */
- if (s->qdev.blocksize <= 0) {
- if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM)
- s->qdev.blocksize = 2048;
- else
- s->qdev.blocksize = 512;
+ if (s->blocksize <= 0) {
+ if (s->type == TYPE_ROM || s->type == TYPE_WORM) {
+ s->blocksize = 2048;
+ } else {
+ s->blocksize = 512;
+ }
}
}
- DPRINTF("block size %d\n", s->qdev.blocksize);
+
+ DPRINTF("block size %d\n", s->blocksize);
return 0;
}
@@ -469,13 +459,13 @@ static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
static SCSIDeviceInfo scsi_generic_info = {
.qdev.name = "scsi-generic",
.qdev.desc = "pass through generic scsi device (/dev/sg*)",
- .qdev.size = sizeof(SCSIGenericState),
+ .qdev.size = sizeof(SCSIDevice),
.qdev.reset = scsi_generic_reset,
.init = scsi_generic_initfn,
.destroy = scsi_destroy,
.alloc_req = scsi_new_request,
.qdev.props = (Property[]) {
- DEFINE_BLOCK_PROPERTIES(SCSIGenericState, qdev.conf),
+ DEFINE_BLOCK_PROPERTIES(SCSIDevice, conf),
DEFINE_PROP_END_OF_LIST(),
},
};
--
1.7.6.4
next prev parent reply other threads:[~2011-10-31 13:28 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-31 13:29 [Qemu-devel] [PULL 00/55] Block patches Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 01/55] iSCSI block driver Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 02/55] Documentation: Add iSCSI section Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 03/55] Teach block/vdi about "discarded" (no longer allocated) blocks Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 04/55] qcow2: fix some errors and typo in qcow2.txt Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 05/55] block: Remove dead code Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 06/55] block: Fix bdrv_open use after free Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 07/55] qcow: Fix bdrv_write_compressed error handling Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 08/55] ide: Fix off-by-one error in array index check Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 09/55] vmdk: Fix use of uninitialised value Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 10/55] vmdk: Improve error handling Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 11/55] vmdk: Fix possible segfaults Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 12/55] Documentation: Describe NBD URL syntax Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 13/55] block: fix qcow2_co_flush deadlock Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 14/55] qemu-io: delete bs instead of leaking it Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 15/55] block: set bs->read_only before .bdrv_open() Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 16/55] block: reinitialize across bdrv_close()/bdrv_open() Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 17/55] Documentation: Add syntax for using sheepdog devices Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 18/55] scsi: pass correct sense code for ENOMEDIUM Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 19/55] atapi/scsi: unify definitions for MMC Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 20/55] atapi: move GESN definitions to scsi-defs.h Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 21/55] atapi: cleanup/fix mode sense results Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 22/55] scsi: notify the device when unit attention is reported Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 23/55] scsi-disk: report media changed via unit attention sense codes Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 24/55] scsi-disk: fix coding style issues (braces) Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 25/55] scsi-disk: add stubs for more MMC commands Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 26/55] scsi-disk: store valid mode pages in a table Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 27/55] atapi/scsi-disk: make mode page values coherent between the two Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 28/55] scsi-disk: support DVD profile in GET CONFIGURATION Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 29/55] scsi-disk: support READ DVD STRUCTURE Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 30/55] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 31/55] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 32/55] qdev: switch children device list to QTAILQ Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 33/55] scsi: remove devs array from SCSIBus Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 34/55] scsi: implement REPORT LUNS for arbitrary LUNs Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 35/55] scsi: allow " Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 36/55] scsi: add channel to addressing Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 37/55] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 38/55] scsi-disk: fix retrying a flush Kevin Wolf
2011-10-31 13:30 ` Kevin Wolf [this message]
2011-10-31 13:30 ` [Qemu-devel] [PATCH 40/55] scsi-generic: remove scsi_req_fixup Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 41/55] scsi-generic: check ioctl statuses when SG_IO succeeds Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 42/55] scsi-generic: look at host status Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 43/55] scsi-generic: snoop READ CAPACITY commands to get block size Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 44/55] scsi-disk: do not duplicate BlockDriverState member Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 45/55] scsi-disk: remove cluster_size Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 46/55] scsi-disk: small clean up to INQUIRY Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 47/55] scsi: move max_lba to SCSIDevice Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 48/55] scsi: make reqops const Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 49/55] scsi: export scsi_generic_reqops Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 50/55] scsi: pass cdb to alloc_req Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 51/55] scsi: do not call transfer_data after canceling a request Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 52/55] scsi-disk: bump SCSIRequest reference count until aio completion runs Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 53/55] scsi-generic: " Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 54/55] scsi: push request restart to SCSIDevice Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 55/55] scsi-disk: add scsi-block for device passthrough Kevin Wolf
2011-10-31 16:52 ` [Qemu-devel] [PULL 00/55] Block patches Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320067830-12093-40-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).