From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 48/55] scsi: make reqops const
Date: Mon, 31 Oct 2011 14:30:23 +0100 [thread overview]
Message-ID: <1320067830-12093-49-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1320067830-12093-1-git-send-email-kwolf@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
Also delete a stale occurrence of SCSIReqOps inside SCSIDeviceInfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/scsi-bus.c | 10 +++++-----
hw/scsi-disk.c | 2 +-
hw/scsi-generic.c | 2 +-
hw/scsi.h | 7 +++----
4 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index bdd6e94..1f38ac8 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -160,7 +160,7 @@ static int32_t scsi_invalid_command(SCSIRequest *req, uint8_t *buf)
return 0;
}
-struct SCSIReqOps reqops_invalid_opcode = {
+static const struct SCSIReqOps reqops_invalid_opcode = {
.size = sizeof(SCSIRequest),
.send_command = scsi_invalid_command
};
@@ -178,7 +178,7 @@ static int32_t scsi_unit_attention(SCSIRequest *req, uint8_t *buf)
return 0;
}
-struct SCSIReqOps reqops_unit_attention = {
+static const struct SCSIReqOps reqops_unit_attention = {
.size = sizeof(SCSIRequest),
.send_command = scsi_unit_attention
};
@@ -386,7 +386,7 @@ static uint8_t *scsi_target_get_buf(SCSIRequest *req)
return r->buf;
}
-struct SCSIReqOps reqops_target_command = {
+static const struct SCSIReqOps reqops_target_command = {
.size = sizeof(SCSITargetReq),
.send_command = scsi_target_send_command,
.read_data = scsi_target_read_data,
@@ -394,8 +394,8 @@ struct SCSIReqOps reqops_target_command = {
};
-SCSIRequest *scsi_req_alloc(SCSIReqOps *reqops, SCSIDevice *d, uint32_t tag,
- uint32_t lun, void *hba_private)
+SCSIRequest *scsi_req_alloc(const SCSIReqOps *reqops, SCSIDevice *d,
+ uint32_t tag, uint32_t lun, void *hba_private)
{
SCSIRequest *req;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 74990a8..77673f2 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1588,7 +1588,7 @@ static int scsi_disk_initfn(SCSIDevice *dev)
}
}
-static SCSIReqOps scsi_disk_reqops = {
+static const SCSIReqOps scsi_disk_reqops = {
.size = sizeof(SCSIDiskReq),
.free_req = scsi_free_request,
.send_command = scsi_send_command,
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index fcf23cd..a5e77cb 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -420,7 +420,7 @@ static int scsi_generic_initfn(SCSIDevice *s)
return 0;
}
-static SCSIReqOps scsi_generic_req_ops = {
+static const SCSIReqOps scsi_generic_req_ops = {
.size = sizeof(SCSIGenericReq),
.free_req = scsi_free_request,
.send_command = scsi_send_command,
diff --git a/hw/scsi.h b/hw/scsi.h
index d56e875..af558c3 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -41,7 +41,7 @@ struct SCSICommand {
struct SCSIRequest {
SCSIBus *bus;
SCSIDevice *dev;
- SCSIReqOps *ops;
+ const SCSIReqOps *ops;
uint32_t refcount;
uint32_t tag;
uint32_t lun;
@@ -96,7 +96,6 @@ struct SCSIDeviceInfo {
SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
void *hba_private);
void (*unit_attention_reported)(SCSIDevice *s);
- SCSIReqOps reqops;
};
struct SCSIBusInfo {
@@ -176,8 +175,8 @@ extern const struct SCSISense sense_code_DEVICE_INTERNAL_RESET;
int scsi_sense_valid(SCSISense sense);
-SCSIRequest *scsi_req_alloc(SCSIReqOps *reqops, SCSIDevice *d, uint32_t tag,
- uint32_t lun, void *hba_private);
+SCSIRequest *scsi_req_alloc(const SCSIReqOps *reqops, SCSIDevice *d,
+ uint32_t tag, uint32_t lun, void *hba_private);
SCSIRequest *scsi_req_new(SCSIDevice *d, uint32_t tag, uint32_t lun,
uint8_t *buf, void *hba_private);
int32_t scsi_req_enqueue(SCSIRequest *req);
--
1.7.6.4
next prev parent reply other threads:[~2011-10-31 13:28 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-31 13:29 [Qemu-devel] [PULL 00/55] Block patches Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 01/55] iSCSI block driver Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 02/55] Documentation: Add iSCSI section Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 03/55] Teach block/vdi about "discarded" (no longer allocated) blocks Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 04/55] qcow2: fix some errors and typo in qcow2.txt Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 05/55] block: Remove dead code Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 06/55] block: Fix bdrv_open use after free Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 07/55] qcow: Fix bdrv_write_compressed error handling Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 08/55] ide: Fix off-by-one error in array index check Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 09/55] vmdk: Fix use of uninitialised value Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 10/55] vmdk: Improve error handling Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 11/55] vmdk: Fix possible segfaults Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 12/55] Documentation: Describe NBD URL syntax Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 13/55] block: fix qcow2_co_flush deadlock Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 14/55] qemu-io: delete bs instead of leaking it Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 15/55] block: set bs->read_only before .bdrv_open() Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 16/55] block: reinitialize across bdrv_close()/bdrv_open() Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 17/55] Documentation: Add syntax for using sheepdog devices Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 18/55] scsi: pass correct sense code for ENOMEDIUM Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 19/55] atapi/scsi: unify definitions for MMC Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 20/55] atapi: move GESN definitions to scsi-defs.h Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 21/55] atapi: cleanup/fix mode sense results Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 22/55] scsi: notify the device when unit attention is reported Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 23/55] scsi-disk: report media changed via unit attention sense codes Kevin Wolf
2011-10-31 13:29 ` [Qemu-devel] [PATCH 24/55] scsi-disk: fix coding style issues (braces) Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 25/55] scsi-disk: add stubs for more MMC commands Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 26/55] scsi-disk: store valid mode pages in a table Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 27/55] atapi/scsi-disk: make mode page values coherent between the two Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 28/55] scsi-disk: support DVD profile in GET CONFIGURATION Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 29/55] scsi-disk: support READ DVD STRUCTURE Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 30/55] scsi-disk: report media changed via GET EVENT STATUS NOTIFICATION Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 31/55] scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo) Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 32/55] qdev: switch children device list to QTAILQ Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 33/55] scsi: remove devs array from SCSIBus Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 34/55] scsi: implement REPORT LUNS for arbitrary LUNs Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 35/55] scsi: allow " Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 36/55] scsi: add channel to addressing Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 37/55] scsi-disk: fail READ CAPACITY if LBA != 0 but PMI == 0 Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 38/55] scsi-disk: fix retrying a flush Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 39/55] scsi-generic: drop SCSIGenericState Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 40/55] scsi-generic: remove scsi_req_fixup Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 41/55] scsi-generic: check ioctl statuses when SG_IO succeeds Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 42/55] scsi-generic: look at host status Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 43/55] scsi-generic: snoop READ CAPACITY commands to get block size Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 44/55] scsi-disk: do not duplicate BlockDriverState member Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 45/55] scsi-disk: remove cluster_size Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 46/55] scsi-disk: small clean up to INQUIRY Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 47/55] scsi: move max_lba to SCSIDevice Kevin Wolf
2011-10-31 13:30 ` Kevin Wolf [this message]
2011-10-31 13:30 ` [Qemu-devel] [PATCH 49/55] scsi: export scsi_generic_reqops Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 50/55] scsi: pass cdb to alloc_req Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 51/55] scsi: do not call transfer_data after canceling a request Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 52/55] scsi-disk: bump SCSIRequest reference count until aio completion runs Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 53/55] scsi-generic: " Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 54/55] scsi: push request restart to SCSIDevice Kevin Wolf
2011-10-31 13:30 ` [Qemu-devel] [PATCH 55/55] scsi-disk: add scsi-block for device passthrough Kevin Wolf
2011-10-31 16:52 ` [Qemu-devel] [PULL 00/55] Block patches Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320067830-12093-49-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).