From: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PATCH 02/10] block: add .bdrv_co_is_allocated()
Date: Fri, 11 Nov 2011 16:47:14 +0000 [thread overview]
Message-ID: <1321030042-20446-3-git-send-email-stefanha@linux.vnet.ibm.com> (raw)
In-Reply-To: <1321030042-20446-1-git-send-email-stefanha@linux.vnet.ibm.com>
This patch adds the .bdrv_co_is_allocated() interface which is identical
to .bdrv_is_allocated() but runs in coroutine context. Running in
coroutine context implies that other coroutines might be performing I/O
at the same time. Therefore it must be safe to run while the following
BlockDriver functions are in-flight:
.bdrv_co_readv()
.bdrv_co_writev()
.bdrv_co_flush()
.bdrv_co_is_allocated()
The new .bdrv_co_is_allocated() interface is useful because it can be
used when a VM is running, whereas .bdrv_is_allocated() is a synchronous
interface that does not cope with parallel requests.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
block.c | 37 +++++++++++++++++++++++++++++++++++++
block_int.h | 2 ++
2 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/block.c b/block.c
index e6ac6d3..f8705b7 100644
--- a/block.c
+++ b/block.c
@@ -1771,6 +1771,26 @@ int bdrv_has_zero_init(BlockDriverState *bs)
return 1;
}
+typedef struct BdrvCoIsAllocatedData {
+ BlockDriverState *bs;
+ int64_t sector_num;
+ int nb_sectors;
+ int *pnum;
+ int ret;
+ bool done;
+} BdrvCoIsAllocatedData;
+
+/* Coroutine wrapper for bdrv_is_allocated() */
+static void coroutine_fn bdrv_is_allocated_co_entry(void *opaque)
+{
+ BdrvCoIsAllocatedData *data = opaque;
+ BlockDriverState *bs = data->bs;
+
+ data->ret = bs->drv->bdrv_co_is_allocated(bs, data->sector_num,
+ data->nb_sectors, data->pnum);
+ data->done = true;
+}
+
/*
* Returns true iff the specified sector is present in the disk image. Drivers
* not implementing the functionality are assumed to not support backing files,
@@ -1786,6 +1806,23 @@ int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
int *pnum)
{
int64_t n;
+ if (bs->drv->bdrv_co_is_allocated) {
+ Coroutine *co;
+ BdrvCoIsAllocatedData data = {
+ .bs = bs,
+ .sector_num = sector_num,
+ .nb_sectors = nb_sectors,
+ .pnum = pnum,
+ .done = false,
+ };
+
+ co = qemu_coroutine_create(bdrv_is_allocated_co_entry);
+ qemu_coroutine_enter(co, &data);
+ while (!data.done) {
+ qemu_aio_wait();
+ }
+ return data.ret;
+ }
if (!bs->drv->bdrv_is_allocated) {
if (sector_num >= bs->total_sectors) {
*pnum = 0;
diff --git a/block_int.h b/block_int.h
index f4547f6..1c1351c 100644
--- a/block_int.h
+++ b/block_int.h
@@ -87,6 +87,8 @@ struct BlockDriver {
int coroutine_fn (*bdrv_co_flush)(BlockDriverState *bs);
int coroutine_fn (*bdrv_co_discard)(BlockDriverState *bs,
int64_t sector_num, int nb_sectors);
+ int coroutine_fn (*bdrv_co_is_allocated)(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors, int *pnum);
int (*bdrv_aio_multiwrite)(BlockDriverState *bs, BlockRequest *reqs,
int num_reqs);
--
1.7.7.1
next prev parent reply other threads:[~2011-11-11 16:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-11 16:47 [Qemu-devel] [PATCH 00/10] block: replace .bdrv_is_allocated() with .bdrv_co_is_allocated() Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 01/10] block: use public bdrv_is_allocated() interface Stefan Hajnoczi
2011-11-11 16:47 ` Stefan Hajnoczi [this message]
2011-11-14 3:04 ` [Qemu-devel] [PATCH 02/10] block: add .bdrv_co_is_allocated() Zhi Yong Wu
2011-11-14 7:32 ` Paolo Bonzini
2011-11-14 8:10 ` Zhi Yong Wu
2011-11-14 8:37 ` Paolo Bonzini
2011-11-14 8:53 ` Zhi Yong Wu
2011-11-14 8:50 ` Kevin Wolf
2011-11-14 8:50 ` Zhi Yong Wu
2011-11-11 16:47 ` [Qemu-devel] [PATCH 03/10] qed: convert to .bdrv_co_is_allocated() Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 04/10] block: convert qcow2, qcow2, and vmdk " Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 05/10] vvfat: use public block layer interface Stefan Hajnoczi
2011-11-11 16:59 ` Kevin Wolf
2011-11-14 11:47 ` Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 06/10] vvfat: convert to .bdrv_co_is_allocated() Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 07/10] vdi: " Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 08/10] cow: " Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 09/10] block: drop .bdrv_is_allocated() interface Stefan Hajnoczi
2011-11-11 16:47 ` [Qemu-devel] [PATCH 10/10] block: add bdrv_co_is_allocated() interface Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321030042-20446-3-git-send-email-stefanha@linux.vnet.ibm.com \
--to=stefanha@linux.vnet.ibm.com \
--cc=kwolf@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).