From: "Benoît Canet" <benoit.canet@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Benoît Canet" <benoit.canet@gmail.com>, avi@redhat.com
Subject: [Qemu-devel] [PATCH v3 07/11] bonito: convert north bridge register mapping to memory API
Date: Tue, 22 Nov 2011 21:34:58 +0100 [thread overview]
Message-ID: <1321994102-28263-8-git-send-email-benoit.canet@gmail.com> (raw)
In-Reply-To: <1321994102-28263-1-git-send-email-benoit.canet@gmail.com>
Signed-off-by: Benoît Canet <benoit.canet@gmail.com>
---
hw/bonito.c | 39 ++++++++++++++++++---------------------
1 files changed, 18 insertions(+), 21 deletions(-)
diff --git a/hw/bonito.c b/hw/bonito.c
index fdb8198..9260848 100644
--- a/hw/bonito.c
+++ b/hw/bonito.c
@@ -201,9 +201,7 @@ typedef struct PCIBonitoState
} boncop;
/* Bonito registers */
- target_phys_addr_t bonito_reg_start;
- target_phys_addr_t bonito_reg_length;
- int bonito_reg_handle;
+ MemoryRegion iomem;
target_phys_addr_t bonito_pciconf_start;
target_phys_addr_t bonito_pciconf_length;
@@ -233,7 +231,8 @@ typedef struct PCIBonitoState
PCIBonitoState * bonito_state;
-static void bonito_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+static void bonito_writel(void *opaque, target_phys_addr_t addr,
+ uint64_t val, unsigned size)
{
PCIBonitoState *s = opaque;
uint32_t saddr;
@@ -295,7 +294,8 @@ static void bonito_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
}
}
-static uint32_t bonito_readl(void *opaque, target_phys_addr_t addr)
+static uint64_t bonito_readl(void *opaque, target_phys_addr_t addr,
+ unsigned size)
{
PCIBonitoState *s = opaque;
uint32_t saddr;
@@ -311,16 +311,14 @@ static uint32_t bonito_readl(void *opaque, target_phys_addr_t addr)
}
}
-static CPUWriteMemoryFunc * const bonito_write[] = {
- NULL,
- NULL,
- bonito_writel,
-};
-
-static CPUReadMemoryFunc * const bonito_read[] = {
- NULL,
- NULL,
- bonito_readl,
+static const MemoryRegionOps bonito_ops = {
+ .read = bonito_readl,
+ .write = bonito_writel,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
};
static void bonito_pciconf_writel(void *opaque, target_phys_addr_t addr,
@@ -690,17 +688,16 @@ static int bonito_pcihost_initfn(SysBusDevice *dev)
static int bonito_initfn(PCIDevice *dev)
{
PCIBonitoState *s = DO_UPCAST(PCIBonitoState, dev, dev);
+ SysBusDevice *sysbus = sysbus_from_qdev(&dev->qdev);
/* Bonito North Bridge, built on FPGA, VENDOR_ID/DEVICE_ID are "undefined" */
pci_config_set_prog_interface(dev->config, 0x00);
/* set the north bridge register mapping */
- s->bonito_reg_handle = cpu_register_io_memory(bonito_read, bonito_write, s,
- DEVICE_NATIVE_ENDIAN);
- s->bonito_reg_start = BONITO_INTERNAL_REG_BASE;
- s->bonito_reg_length = BONITO_INTERNAL_REG_SIZE;
- cpu_register_physical_memory(s->bonito_reg_start, s->bonito_reg_length,
- s->bonito_reg_handle);
+ memory_region_init_io(&s->iomem, &bonito_ops, s,
+ "north-bridge-register", BONITO_INTERNAL_REG_SIZE);
+ sysbus_init_mmio_region(sysbus, &s->iomem);
+ sysbus_mmio_map(sysbus, 0, BONITO_INTERNAL_REG_BASE);
/* set the north bridge pci configure mapping */
s->bonito_pciconf_handle = cpu_register_io_memory(bonito_pciconf_read,
--
1.7.7.3
next prev parent reply other threads:[~2011-11-22 20:35 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-22 20:34 [Qemu-devel] [PATCH v3 00/11] more memory API conversions Benoît Canet
2011-11-22 20:34 ` [Qemu-devel] [PATCH v3 01/11] mcf5206: convert to memory API Benoît Canet
2011-11-22 20:34 ` [Qemu-devel] [PATCH v3 02/11] mcf_uart: " Benoît Canet
2011-11-22 20:34 ` [Qemu-devel] [PATCH v3 03/11] mcf_fec: " Benoît Canet
2011-11-22 20:34 ` [Qemu-devel] [PATCH v3 04/11] mcf_intc: " Benoît Canet
2011-11-22 20:34 ` [Qemu-devel] [PATCH v3 05/11] lm32_uart: " Benoît Canet
2011-11-22 20:34 ` [Qemu-devel] [PATCH v3 06/11] lm32_sys: " Benoît Canet
2011-11-22 20:34 ` Benoît Canet [this message]
2011-11-22 23:03 ` [Qemu-devel] [PATCH v3 07/11] bonito: convert north bridge register mapping " Peter Maydell
2011-11-23 17:55 ` Benoît Canet
2011-11-23 18:25 ` Peter Maydell
2011-11-24 8:40 ` Avi Kivity
2011-11-24 8:47 ` Benoît Canet
2011-11-22 20:34 ` [Qemu-devel] [PATCH v3 08/11] bonito: convert north bridge pci config " Benoît Canet
2011-11-22 20:35 ` [Qemu-devel] [PATCH v3 09/11] bonito: convert south " Benoît Canet
2011-11-22 20:35 ` [Qemu-devel] [PATCH v3 10/11] bonito: convert ldma " Benoît Canet
2011-11-22 20:35 ` [Qemu-devel] [PATCH v3 11/11] bonito: convert cop " Benoît Canet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321994102-28263-8-git-send-email-benoit.canet@gmail.com \
--to=benoit.canet@gmail.com \
--cc=avi@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).