qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Mark Langsdorf <mark.langsdorf@calxeda.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org,
	Mark Langsdorf <mark.langsdorf@calxeda.com>,
	paul@codesourcery.com, rob.herring@calxeda.com
Subject: [Qemu-devel] [PATCH v4 5/7] add L2x0/PL310 cache controller device
Date: Tue, 27 Dec 2011 19:24:38 -0600	[thread overview]
Message-ID: <1325035480-20409-6-git-send-email-mark.langsdorf@calxeda.com> (raw)
In-Reply-To: <1325035480-20409-1-git-send-email-mark.langsdorf@calxeda.com>

From: Rob Herring <rob.herring@calxeda.com>

This is just a dummy device for ARM L2 cache controllers, based on the
pl310. The cache type parameter can be defined by a property value
and has a meaningful default.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
---
Changes from v3
	Changed default value
	Adding tracking of cache_type bits from aux_control
Changes from v2
        Reformatted a couple of function definitions to be 80 lines long
Changes from v1
        Corrected formatting
        Clarified the copyrights
        Clarified GPL revision
        Clarified model version
        Removed hw_error() calls
        Added a reset function
        Restructed everything as switch/case statements
        Added a type cache property

 Makefile.target |    1 +
 hw/arm_l2x0.c   |  183 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 184 insertions(+), 0 deletions(-)
 create mode 100644 hw/arm_l2x0.c

diff --git a/Makefile.target b/Makefile.target
index 3261383..db5e44c 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -336,6 +336,7 @@ obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
 obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
 obj-arm-y += versatile_pci.o
 obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
+obj-arm-y += arm_l2x0.o
 obj-arm-y += arm_mptimer.o
 obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
 obj-arm-y += pl061.o
diff --git a/hw/arm_l2x0.c b/hw/arm_l2x0.c
new file mode 100644
index 0000000..cfd7e10
--- /dev/null
+++ b/hw/arm_l2x0.c
@@ -0,0 +1,183 @@
+/*
+ * ARM dummy L210, L220, PL310 cache controller.
+ *
+ * Copyright (c) 2010-2012 Calxeda
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or any later version, as published by the Free Software
+ * Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "sysbus.h"
+
+/* L2C-310 r3p2 */
+#define CACHE_ID 0x410000c8
+
+typedef struct l2x0_state {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    uint32_t cache_type;
+    uint32_t ctrl;
+    uint32_t aux_ctrl;
+    uint32_t data_ctrl;
+    uint32_t tag_ctrl;
+    uint32_t filter_start;
+    uint32_t filter_end;
+} l2x0_state;
+
+static const VMStateDescription vmstate_l2x0 = {
+    .name = "l2x0",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(ctrl, l2x0_state),
+        VMSTATE_UINT32(aux_ctrl, l2x0_state),
+        VMSTATE_UINT32(data_ctrl, l2x0_state),
+        VMSTATE_UINT32(tag_ctrl, l2x0_state),
+        VMSTATE_UINT32(filter_start, l2x0_state),
+        VMSTATE_UINT32(filter_end, l2x0_state),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+
+static uint64_t l2x0_priv_read(void *opaque, target_phys_addr_t offset,
+                               unsigned size)
+{
+    l2x0_state *s = (l2x0_state *)opaque;
+    offset &= 0xfff;
+    if (offset >= 0x730 && offset < 0x800) {
+        return 0; /* cache ops complete */
+    }
+    switch (offset) {
+    case 0:
+        return CACHE_ID;
+    case 0x4:
+        return s->cache_type;
+    case 0x100:
+        return s->ctrl;
+    case 0x104:
+        return s->aux_ctrl;
+    case 0x108:
+        return s->tag_ctrl;
+    case 0x10C:
+        return s->data_ctrl;
+    case 0xC00:
+        return s->filter_start;
+    case 0xC04:
+        return s->filter_end;
+    case 0xF40:
+        return 0;
+    case 0xF60:
+        return 0;
+    case 0xF80:
+        return 0;
+    default:
+        fprintf(stderr, "l2x0_priv_read: Bad offset %x\n", (int)offset);
+        break;
+    }
+    return 0;
+}
+
+static void l2x0_priv_write(void *opaque, target_phys_addr_t offset,
+                            uint64_t value, unsigned size)
+{
+    l2x0_state *s = (l2x0_state *)opaque;
+    offset &= 0xfff;
+    uint32_t cache_data;
+    if (offset >= 0x730 && offset < 0x800) {
+        /* ignore */
+        return;
+    }
+    switch (offset) {
+    case 0x100:
+        s->ctrl = value & 1;
+        break;
+    case 0x104:
+        /* aux_ctrl values affect cache_type values */
+        s->aux_ctrl = value;
+        cache_data = (value & (7 << 17)) >> 15;
+        cache_data |= (value & (1 << 16)) >> 16;
+        s->cache_type |= (cache_data << 18) | (cache_data << 6);
+        break;
+    case 0x108:
+        s->tag_ctrl = value;
+        break;
+    case 0x10C:
+        s->data_ctrl = value;
+        break;
+    case 0xC00:
+        s->filter_start = value;
+        break;
+    case 0xC04:
+        s->filter_end = value;
+        break;
+    case 0xF40:
+        return;
+    case 0xF60:
+        return;
+    case 0xF80:
+        return;
+    default:
+        fprintf(stderr, "l2x0_priv_write: Bad offset %x\n", (int)offset);
+        break;
+    }
+}
+
+static void l2x0_priv_reset(DeviceState *dev)
+{
+    l2x0_state *s = DO_UPCAST(l2x0_state, busdev.qdev, dev);
+
+    s->ctrl = 0;
+    s->aux_ctrl = 0x02020000;
+    s->tag_ctrl = 0;
+    s->data_ctrl = 0;
+    s->filter_start = 0;
+    s->filter_end = 0;
+}
+
+static const MemoryRegionOps l2x0_mem_ops = {
+    .read = l2x0_priv_read,
+    .write = l2x0_priv_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+ };
+
+static int l2x0_priv_init(SysBusDevice *dev)
+{
+    l2x0_state *s = FROM_SYSBUS(l2x0_state, dev);
+
+    memory_region_init_io(&s->iomem, &l2x0_mem_ops, s, "l2x0_cc", 0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    return 0;
+}
+
+static SysBusDeviceInfo l2x0_info = {
+    .init = l2x0_priv_init,
+    .qdev.name = "l2x0",
+    .qdev.size = sizeof(l2x0_state),
+    .qdev.vmsd = &vmstate_l2x0,
+    .qdev.no_user = 1,
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_UINT32("type", l2x0_state, cache_type, 0x1c100100),
+        DEFINE_PROP_END_OF_LIST(),
+    },
+    .qdev.reset = l2x0_priv_reset,
+};
+
+static void l2x0_register_device(void)
+{
+    sysbus_register_withprop(&l2x0_info);
+}
+
+device_init(l2x0_register_device)
+
-- 
1.7.5.4

  parent reply	other threads:[~2011-12-28  1:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-28  1:24 [Qemu-devel] [PATCH v4 0/7] various ARM fixes Mark Langsdorf
2011-12-28  1:24 ` [Qemu-devel] [PATCH v4 1/7] arm: add missing scu registers Mark Langsdorf
2011-12-28  1:24 ` [Qemu-devel] [PATCH v4 2/7] arm: Set frequencies for arm_timer Mark Langsdorf
2011-12-28 11:46   ` Andreas Färber
2011-12-28  1:24 ` [Qemu-devel] [PATCH v4 3/7] arm: add dummy v7 cp15 config_base_register Mark Langsdorf
2011-12-28  1:24 ` [Qemu-devel] [PATCH v4 4/7] arm: add dummy gic security registers Mark Langsdorf
2011-12-28  1:24 ` Mark Langsdorf [this message]
2011-12-28  1:32   ` [Qemu-devel] [PATCH v4 5/7] add L2x0/PL310 cache controller device Peter Maydell
2011-12-28  1:24 ` [Qemu-devel] [PATCH v4 6/7] Add xgmac ethernet model Mark Langsdorf
2011-12-28  1:24 ` [Qemu-devel] [PATCH v4 7/7] arm: make the number of GIC interrupts configurable Mark Langsdorf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1325035480-20409-6-git-send-email-mark.langsdorf@calxeda.com \
    --to=mark.langsdorf@calxeda.com \
    --cc=paul@codesourcery.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).