[Qemu-devel] [PATCH 2/3] qerror: restore alphabetical order over qerrors

[Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>]

Over time these must have gotten out of order.  Put everything back in
alphabetical order.

This is purely a clean up.  In practice nothing depends on the order.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 qerror.c |   84 +++++++++++++++++++++++++++++++-------------------------------
 qerror.h |   72 ++++++++++++++++++++++++++--------------------------
 2 files changed, 78 insertions(+), 78 deletions(-)

diff --git a/qerror.c b/qerror.c
index 62c0c707..2979b3e 100644
--- a/qerror.c
+++ b/qerror.c
@@ -44,6 +44,10 @@ static const QType qerror_type = {
  */
 static const QErrorStringTable qerror_table[] = {
     {
+        .error_fmt = QERR_ADD_CLIENT_FAILED,
+        .desc      = "Could not add client",
+    },
+    {
         .error_fmt = QERR_BAD_BUS_FOR_DEVICE,
         .desc      = "Device '%(device)' can't go on a %(bad_bus_type) bus",
     },
@@ -52,26 +56,30 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Block format '%(format)' used by device '%(name)' does not support feature '%(feature)'",
     },
     {
-        .error_fmt = QERR_BUS_NOT_FOUND,
-        .desc      = "Bus '%(bus)' not found",
-    },
-    {
         .error_fmt = QERR_BUS_NO_HOTPLUG,
         .desc      = "Bus '%(bus)' does not support hotplugging",
     },
     {
-        .error_fmt = QERR_COMMAND_NOT_FOUND,
-        .desc      = "The command %(name) has not been found",
+        .error_fmt = QERR_BUS_NOT_FOUND,
+        .desc      = "Bus '%(bus)' not found",
     },
     {
         .error_fmt = QERR_COMMAND_DISABLED,
         .desc      = "The command %(name) has been disabled for this instance",
     },
     {
+        .error_fmt = QERR_COMMAND_NOT_FOUND,
+        .desc      = "The command %(name) has not been found",
+    },
+    {
         .error_fmt = QERR_DEVICE_ENCRYPTED,
         .desc      = "Device '%(device)' is encrypted",
     },
     {
+        .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
+        .desc      = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
+    },
+    {
         .error_fmt = QERR_DEVICE_INIT_FAILED,
         .desc      = "Device '%(device)' could not be initialized",
     },
@@ -80,10 +88,6 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Device '%(device)' is in use",
     },
     {
-        .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
-        .desc      = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
-    },
-    {
         .error_fmt = QERR_DEVICE_LOCKED,
         .desc      = "Device '%(device)' is locked",
     },
@@ -92,6 +96,14 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Device '%(device)' has multiple child busses",
     },
     {
+        .error_fmt = QERR_DEVICE_NO_BUS,
+        .desc      = "Device '%(device)' has no child bus",
+    },
+    {
+        .error_fmt = QERR_DEVICE_NO_HOTPLUG,
+        .desc      = "Device '%(device)' does not support hotplugging",
+    },
+    {
         .error_fmt = QERR_DEVICE_NOT_ACTIVE,
         .desc      = "Device '%(device)' has not been activated",
     },
@@ -108,14 +120,6 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Device '%(device)' is not removable",
     },
     {
-        .error_fmt = QERR_DEVICE_NO_BUS,
-        .desc      = "Device '%(device)' has no child bus",
-    },
-    {
-        .error_fmt = QERR_DEVICE_NO_HOTPLUG,
-        .desc      = "Device '%(device)' does not support hotplugging",
-    },
-    {
         .error_fmt = QERR_DUPLICATE_ID,
         .desc      = "Duplicate ID '%(id)' for %(object)",
     },
@@ -140,6 +144,10 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Invalid parameter '%(name)'",
     },
     {
+        .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
+        .desc      = "Invalid parameter combination",
+    },
+    {
         .error_fmt = QERR_INVALID_PARAMETER_TYPE,
         .desc      = "Invalid parameter type, expected: %(expected)",
     },
@@ -156,15 +164,15 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "An IO error has occurred",
     },
     {
-        .error_fmt = QERR_JSON_PARSING,
-        .desc      = "Invalid JSON syntax",
-    },
-    {
         .error_fmt = QERR_JSON_PARSE_ERROR,
         .desc      = "JSON parse error, %(message)",
 
     },
     {
+        .error_fmt = QERR_JSON_PARSING,
+        .desc      = "Invalid JSON syntax",
+    },
+    {
         .error_fmt = QERR_KVM_MISSING_CAP,
         .desc      = "Using KVM without %(capability), %(feature) unavailable",
     },
@@ -210,6 +218,14 @@ static const QErrorStringTable qerror_table[] = {
                      "value %(value) (minimum: %(min), maximum: %(max)'",
     },
     {
+        .error_fmt = QERR_QGA_COMMAND_FAILED,
+        .desc      = "Guest agent command failed, error was '%(message)'",
+    },
+    {
+        .error_fmt = QERR_QGA_LOGGING_FAILED,
+        .desc      = "Guest agent failed to log non-optional log statement",
+    },
+    {
         .error_fmt = QERR_QMP_BAD_INPUT_OBJECT,
         .desc      = "Expected '%(expected)' in QMP input",
     },
@@ -230,10 +246,6 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Could not set password",
     },
     {
-        .error_fmt = QERR_ADD_CLIENT_FAILED,
-        .desc      = "Could not add client",
-    },
-    {
         .error_fmt = QERR_TOO_MANY_FILES,
         .desc      = "Too many open files",
     },
@@ -242,15 +254,15 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "An undefined error has occurred",
     },
     {
-        .error_fmt = QERR_UNSUPPORTED,
-        .desc      = "this feature or command is not currently supported",
-    },
-    {
         .error_fmt = QERR_UNKNOWN_BLOCK_FORMAT_FEATURE,
         .desc      = "'%(device)' uses a %(format) feature which is not "
                      "supported by this qemu version: %(feature)",
     },
     {
+        .error_fmt = QERR_UNSUPPORTED,
+        .desc      = "this feature or command is not currently supported",
+    },
+    {
         .error_fmt = QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION,
         .desc      = "Migration is disabled when VirtFS export path '%(path)' "
                      "is mounted in the guest using mount_tag '%(tag)'",
@@ -259,18 +271,6 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_VNC_SERVER_FAILED,
         .desc      = "Could not start VNC server on %(target)",
     },
-    {
-        .error_fmt = QERR_QGA_LOGGING_FAILED,
-        .desc      = "Guest agent failed to log non-optional log statement",
-    },
-    {
-        .error_fmt = QERR_QGA_COMMAND_FAILED,
-        .desc      = "Guest agent command failed, error was '%(message)'",
-    },
-    {
-        .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
-        .desc      = "Invalid parameter combination",
-    },
     {}
 };
 
diff --git a/qerror.h b/qerror.h
index 36e0343..c34674e 100644
--- a/qerror.h
+++ b/qerror.h
@@ -51,42 +51,54 @@ QError *qobject_to_qerror(const QObject *obj);
  * Please keep the definitions in alphabetical order.
  * Use scripts/check-qerror.sh to check.
  */
+#define QERR_ADD_CLIENT_FAILED \
+    "{ 'class': 'AddClientFailed', 'data': {} }"
+
 #define QERR_BAD_BUS_FOR_DEVICE \
     "{ 'class': 'BadBusForDevice', 'data': { 'device': %s, 'bad_bus_type': %s } }"
 
 #define QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED \
     "{ 'class': 'BlockFormatFeatureNotSupported', 'data': { 'format': %s, 'name': %s, 'feature': %s } }"
 
-#define QERR_BUS_NOT_FOUND \
-    "{ 'class': 'BusNotFound', 'data': { 'bus': %s } }"
+#define QERR_BUFFER_OVERRUN \
+    "{ 'class': 'BufferOverrun', 'data': {} }"
 
 #define QERR_BUS_NO_HOTPLUG \
     "{ 'class': 'BusNoHotplug', 'data': { 'bus': %s } }"
 
-#define QERR_COMMAND_NOT_FOUND \
-    "{ 'class': 'CommandNotFound', 'data': { 'name': %s } }"
+#define QERR_BUS_NOT_FOUND \
+    "{ 'class': 'BusNotFound', 'data': { 'bus': %s } }"
 
 #define QERR_COMMAND_DISABLED \
     "{ 'class': 'CommandDisabled', 'data': { 'name': %s } }"
 
+#define QERR_COMMAND_NOT_FOUND \
+    "{ 'class': 'CommandNotFound', 'data': { 'name': %s } }"
+
 #define QERR_DEVICE_ENCRYPTED \
     "{ 'class': 'DeviceEncrypted', 'data': { 'device': %s } }"
 
+#define QERR_DEVICE_FEATURE_BLOCKS_MIGRATION \
+    "{ 'class': 'DeviceFeatureBlocksMigration', 'data': { 'device': %s, 'feature': %s } }"
+
 #define QERR_DEVICE_INIT_FAILED \
     "{ 'class': 'DeviceInitFailed', 'data': { 'device': %s } }"
 
 #define QERR_DEVICE_IN_USE \
     "{ 'class': 'DeviceInUse', 'data': { 'device': %s } }"
 
-#define QERR_DEVICE_FEATURE_BLOCKS_MIGRATION \
-    "{ 'class': 'DeviceFeatureBlocksMigration', 'data': { 'device': %s, 'feature': %s } }"
-
 #define QERR_DEVICE_LOCKED \
     "{ 'class': 'DeviceLocked', 'data': { 'device': %s } }"
 
 #define QERR_DEVICE_MULTIPLE_BUSSES \
     "{ 'class': 'DeviceMultipleBusses', 'data': { 'device': %s } }"
 
+#define QERR_DEVICE_NO_BUS \
+    "{ 'class': 'DeviceNoBus', 'data': { 'device': %s } }"
+
+#define QERR_DEVICE_NO_HOTPLUG \
+    "{ 'class': 'DeviceNoHotplug', 'data': { 'device': %s } }"
+
 #define QERR_DEVICE_NOT_ACTIVE \
     "{ 'class': 'DeviceNotActive', 'data': { 'device': %s } }"
 
@@ -99,12 +111,6 @@ QError *qobject_to_qerror(const QObject *obj);
 #define QERR_DEVICE_NOT_REMOVABLE \
     "{ 'class': 'DeviceNotRemovable', 'data': { 'device': %s } }"
 
-#define QERR_DEVICE_NO_BUS \
-    "{ 'class': 'DeviceNoBus', 'data': { 'device': %s } }"
-
-#define QERR_DEVICE_NO_HOTPLUG \
-    "{ 'class': 'DeviceNoHotplug', 'data': { 'device': %s } }"
-
 #define QERR_DUPLICATE_ID \
     "{ 'class': 'DuplicateId', 'data': { 'id': %s, 'object': %s } }"
 
@@ -114,12 +120,18 @@ QError *qobject_to_qerror(const QObject *obj);
 #define QERR_FD_NOT_SUPPLIED \
     "{ 'class': 'FdNotSupplied', 'data': {} }"
 
+#define QERR_FEATURE_DISABLED \
+    "{ 'class': 'FeatureDisabled', 'data': { 'name': %s } }"
+
 #define QERR_INVALID_BLOCK_FORMAT \
     "{ 'class': 'InvalidBlockFormat', 'data': { 'name': %s } }"
 
 #define QERR_INVALID_PARAMETER \
     "{ 'class': 'InvalidParameter', 'data': { 'name': %s } }"
 
+#define QERR_INVALID_PARAMETER_COMBINATION \
+    "{ 'class': 'InvalidParameterCombination', 'data': {} }"
+
 #define QERR_INVALID_PARAMETER_TYPE \
     "{ 'class': 'InvalidParameterType', 'data': { 'name': %s,'expected': %s } }"
 
@@ -132,14 +144,11 @@ QError *qobject_to_qerror(const QObject *obj);
 #define QERR_IO_ERROR \
     "{ 'class': 'IOError', 'data': {} }"
 
-#define QERR_JSON_PARSING \
-    "{ 'class': 'JSONParsing', 'data': {} }"
-
 #define QERR_JSON_PARSE_ERROR \
     "{ 'class': 'JSONParseError', 'data': { 'message': %s } }"
 
-#define QERR_BUFFER_OVERRUN \
-    "{ 'class': 'BufferOverrun', 'data': {} }"
+#define QERR_JSON_PARSING \
+    "{ 'class': 'JSONParsing', 'data': {} }"
 
 #define QERR_KVM_MISSING_CAP \
     "{ 'class': 'KVMMissingCap', 'data': { 'capability': %s, 'feature': %s } }"
@@ -174,6 +183,12 @@ QError *qobject_to_qerror(const QObject *obj);
 #define QERR_PROPERTY_VALUE_OUT_OF_RANGE \
     "{ 'class': 'PropertyValueOutOfRange', 'data': { 'device': %s, 'property': %s, 'value': %"PRId64", 'min': %"PRId64", 'max': %"PRId64" } }"
 
+#define QERR_QGA_COMMAND_FAILED \
+    "{ 'class': 'QgaCommandFailed', 'data': { 'message': %s } }"
+
+#define QERR_QGA_LOGGING_FAILED \
+    "{ 'class': 'QgaLoggingFailed', 'data': {} }"
+
 #define QERR_QMP_BAD_INPUT_OBJECT \
     "{ 'class': 'QMPBadInputObject', 'data': { 'expected': %s } }"
 
@@ -189,37 +204,22 @@ QError *qobject_to_qerror(const QObject *obj);
 #define QERR_SET_PASSWD_FAILED \
     "{ 'class': 'SetPasswdFailed', 'data': {} }"
 
-#define QERR_ADD_CLIENT_FAILED \
-    "{ 'class': 'AddClientFailed', 'data': {} }"
-
 #define QERR_TOO_MANY_FILES \
     "{ 'class': 'TooManyFiles', 'data': {} }"
 
 #define QERR_UNDEFINED_ERROR \
     "{ 'class': 'UndefinedError', 'data': {} }"
 
-#define QERR_UNSUPPORTED \
-    "{ 'class': 'Unsupported', 'data': {} }"
-
 #define QERR_UNKNOWN_BLOCK_FORMAT_FEATURE \
     "{ 'class': 'UnknownBlockFormatFeature', 'data': { 'device': %s, 'format': %s, 'feature': %s } }"
 
+#define QERR_UNSUPPORTED \
+    "{ 'class': 'Unsupported', 'data': {} }"
+
 #define QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION \
     "{ 'class': 'VirtFSFeatureBlocksMigration', 'data': { 'path': %s, 'tag': %s } }"
 
 #define QERR_VNC_SERVER_FAILED \
     "{ 'class': 'VNCServerFailed', 'data': { 'target': %s } }"
 
-#define QERR_FEATURE_DISABLED \
-    "{ 'class': 'FeatureDisabled', 'data': { 'name': %s } }"
-
-#define QERR_QGA_LOGGING_FAILED \
-    "{ 'class': 'QgaLoggingFailed', 'data': {} }"
-
-#define QERR_QGA_COMMAND_FAILED \
-    "{ 'class': 'QgaCommandFailed', 'data': { 'message': %s } }"
-
-#define QERR_INVALID_PARAMETER_COMBINATION \
-    "{ 'class': 'InvalidParameterCombination', 'data': {} }"
-
 #endif /* QERROR_H */
-- 
1.7.7.3