[Qemu-devel] [PATCH v3 1/2] ahci: convert ahci_reset to use AHCIState

[Mark Langsdorf <mark.langsdorf@calxeda.com>]

From: Rob Herring <rob.herring@calxeda.com>

Use AHCIState instead of AHCIPCIState so the function can be used for
non-PCI based AHCI controllers.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
---
Changes from v1, v2
	None

 hw/ide/ahci.c |   14 +++++++-------
 hw/ide/ich.c  |    4 ++--
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 0af201d..135d0ee 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -336,7 +336,7 @@ static void ahci_mem_write(void *opaque, target_phys_addr_t addr,
             case HOST_CTL: /* R/W */
                 if (val & HOST_CTL_RESET) {
                     DPRINTF(-1, "HBA Reset\n");
-                    ahci_reset(container_of(s, AHCIPCIState, ahci));
+                    ahci_reset(s);
                 } else {
                     s->control_regs.ghc = (val & 0x3) | HOST_CTL_AHCI_EN;
                     ahci_check_irq(s);
@@ -1199,18 +1199,18 @@ void ahci_uninit(AHCIState *s)
 
 void ahci_reset(void *opaque)
 {
-    struct AHCIPCIState *d = opaque;
+    struct AHCIState *s = opaque;
     AHCIPortRegs *pr;
     int i;
 
-    d->ahci.control_regs.irqstatus = 0;
-    d->ahci.control_regs.ghc = 0;
+    s->control_regs.irqstatus = 0;
+    s->control_regs.ghc = 0;
 
-    for (i = 0; i < d->ahci.ports; i++) {
-        pr = &d->ahci.dev[i].port_regs;
+    for (i = 0; i < s->ports; i++) {
+        pr = &s->dev[i].port_regs;
         pr->irq_stat = 0;
         pr->irq_mask = 0;
         pr->scr_ctl = 0;
-        ahci_reset_port(&d->ahci, i);
+        ahci_reset_port(s, i);
     }
 }
diff --git a/hw/ide/ich.c b/hw/ide/ich.c
index 3f7510f..44363ec 100644
--- a/hw/ide/ich.c
+++ b/hw/ide/ich.c
@@ -102,7 +102,7 @@ static int pci_ich9_ahci_init(PCIDevice *dev)
     /* XXX Software should program this register */
     d->card.config[0x90]   = 1 << 6; /* Address Map Register - AHCI mode */
 
-    qemu_register_reset(ahci_reset, d);
+    qemu_register_reset(ahci_reset, &d->ahci);
 
     msi_init(dev, 0x50, 1, true, false);
     d->ahci.irq = d->card.irq[0];
@@ -133,7 +133,7 @@ static int pci_ich9_uninit(PCIDevice *dev)
     d = DO_UPCAST(struct AHCIPCIState, card, dev);
 
     msi_uninit(dev);
-    qemu_unregister_reset(ahci_reset, d);
+    qemu_unregister_reset(ahci_reset, &d->ahci);
     ahci_uninit(&d->ahci);
 
     return 0;
-- 
1.7.5.4