[Qemu-devel] [PATCH 5/5] arm: SoC model for Calxeda Highbank

[Mark Langsdorf <mark.langsdorf@calxeda.com>]

From: Rob Herring <rob.herring@calxeda.com>

Adds support for Calxeda's Highbank SoC.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
---
 Makefile.target |    1 +
 hw/highbank.c   |  227 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+), 0 deletions(-)
 create mode 100644 hw/highbank.c

diff --git a/Makefile.target b/Makefile.target
index 5780a5f..56ca94d 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -339,6 +339,7 @@ obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
 obj-arm-y += arm_l2x0.o
 obj-arm-y += arm_mptimer.o
 obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
+obj-arm-y += highbank.o
 obj-arm-y += pl061.o
 obj-arm-y += xgmac.o
 obj-arm-y += arm-semi.o
diff --git a/hw/highbank.c b/hw/highbank.c
new file mode 100644
index 0000000..73b6564
--- /dev/null
+++ b/hw/highbank.c
@@ -0,0 +1,227 @@
+/*
+ * Calxeda Highbank SoC emulation
+ *
+ * Copyright (c) 2010-2012 Calxeda
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "sysbus.h"
+#include "arm-misc.h"
+#include "primecell.h"
+#include "devices.h"
+#include "loader.h"
+#include "elf.h"
+#include "net.h"
+#include "sysemu.h"
+#include "boards.h"
+#include "sysbus.h"
+#include "blockdev.h"
+#include "exec-memory.h"
+
+#define SMP_BOOT_ADDR 0
+#define NIRQ_GIC      160
+
+/* Board init.  */
+static void highbank_cpu_reset(void *opaque)
+{
+    CPUState *env = opaque;
+
+    cpu_reset(env);
+    env->cp15.c15_config_base_address = 0xfff10000;
+
+    /* Set entry point for secondary CPUs.  This assumes we're using
+       the init code from arm_boot.c.  Real hardware resets all CPUs
+       the same.  */
+    env->regs[15] = 0;
+}
+
+static void hb_regs_write(void *opaque, target_phys_addr_t offset,
+                          uint64_t value, unsigned size)
+{
+    uint32_t *regs = opaque;
+
+    if (offset == 0xf00) {
+        if (value == 1 || value == 2) {
+            qemu_system_reset_request();
+        } else if (value == 3) {
+            qemu_system_shutdown_request();
+        }
+    }
+
+    regs[offset/4] = value;
+}
+
+static uint64_t hb_regs_read(void *opaque, target_phys_addr_t offset,
+                             unsigned size)
+{
+    uint32_t *regs = opaque;
+    uint32_t value = regs[offset/4];
+
+    if ((offset == 0x100) || (offset == 0x108) || (offset == 0x10C)) {
+        value |= 0x30000000;
+    }
+
+    return value;
+}
+
+static const MemoryRegionOps hb_mem_ops = {
+    .read = hb_regs_read,
+    .write = hb_regs_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static struct arm_boot_info highbank_binfo;
+
+static void highbank_init(ram_addr_t ram_size,
+                     const char *boot_device,
+                     const char *kernel_filename, const char *kernel_cmdline,
+                     const char *initrd_filename, const char *cpu_model)
+{
+    CPUState *env = NULL;
+    DeviceState *dev;
+    SysBusDevice *busdev;
+    qemu_irq *irqp;
+    qemu_irq pic[128];
+    int n;
+    qemu_irq cpu_irq[4];
+    uint32_t *regs;
+    MemoryRegion *iomem;
+    MemoryRegion *sysram;
+    MemoryRegion *dram;
+    MemoryRegion *sysmem;
+
+    if (!cpu_model) {
+        cpu_model = "cortex-a9";
+    }
+
+    for (n = 0; n < smp_cpus; n++) {
+        env = cpu_init(cpu_model);
+        if (!env) {
+            fprintf(stderr, "Unable to find CPU definition\n");
+            exit(1);
+        }
+        irqp = arm_pic_init_cpu(env);
+        cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
+        qemu_register_reset(highbank_cpu_reset, env);
+    }
+
+    /* Override default RAM size */
+    if (ram_size == 0x8000000) {
+        if (sizeof(long) == 8) {
+            ram_size = 0xff900000;
+        } else {
+            ram_size = 0x80000000;
+        }
+    }
+    sysmem = get_system_memory();
+    dram = g_new(MemoryRegion, 1);
+    memory_region_init_ram(dram, "highbank.dram", ram_size);
+    /* SDRAM at address zero.  */
+    memory_region_add_subregion(sysmem, 0, dram);
+
+    sysram = g_new(MemoryRegion, 1);
+    memory_region_init_ram(sysram, "highbank.sysram", 0x8000);
+    memory_region_add_subregion(sysmem, 0xfff88000, sysram);
+    if (load_image_targphys("sysram.bin", 0xfff88000, 0x8000) < 0) {
+            fprintf(stderr, "Unable to load sysram.bin\n");
+    }
+
+    dev = qdev_create(NULL, "a9mpcore_priv");
+    qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
+    qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
+    qdev_init_nofail(dev);
+    busdev = sysbus_from_qdev(dev);
+    sysbus_mmio_map(busdev, 0, 0xfff10000);
+    for (n = 0; n < smp_cpus; n++) {
+        sysbus_connect_irq(busdev, n, cpu_irq[n]);
+    }
+
+    for (n = 0; n < 128; n++) {
+        pic[n] = qdev_get_gpio_in(dev, n);
+    }
+
+    dev = qdev_create(NULL, "l2x0");
+    qdev_init_nofail(dev);
+    busdev = sysbus_from_qdev(dev);
+    sysbus_mmio_map(busdev, 0, 0xfff12000);
+
+    dev = qdev_create(NULL, "sp804");
+    qdev_prop_set_uint32(dev, "freq0", 150000000);
+    qdev_prop_set_uint32(dev, "freq1", 150000000);
+    qdev_init_nofail(dev);
+    busdev = sysbus_from_qdev(dev);
+    sysbus_mmio_map(busdev, 0, 0xfff34000);
+    sysbus_connect_irq(busdev, 0, pic[18]);
+    sysbus_create_simple("pl011", 0xfff36000, pic[20]);
+
+    iomem = g_new(MemoryRegion, 1);
+    regs = g_malloc0(0x200);
+    regs[0x40] = 0x05F20121;
+    regs[0x41] = 0x2;
+    regs[0x42] = 0x05F30121;
+    regs[0x43] = 0x05F40121;
+    memory_region_init_io(iomem, &hb_mem_ops, regs, "highbank_regs", 0x1000);
+    memory_region_add_subregion(sysmem, 0xfff3c000, iomem);
+
+    sysbus_create_simple("pl061", 0xfff30000, pic[14]);
+    sysbus_create_simple("pl061", 0xfff31000, pic[15]);
+    sysbus_create_simple("pl061", 0xfff32000, pic[16]);
+    sysbus_create_simple("pl061", 0xfff33000, pic[17]);
+    sysbus_create_simple("pl031", 0xfff35000, pic[19]);
+    sysbus_create_simple("pl022", 0xfff39000, pic[23]);
+
+    sysbus_create_simple("sysbus-ahci", 0xffe08000, pic[83]);
+
+    qemu_check_nic_model(&nd_table[0], "xgmac");
+    dev = qdev_create(NULL, "xgmac");
+    qdev_set_nic_properties(dev, &nd_table[0]);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff50000);
+    sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[77]);
+    sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[78]);
+    sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[79]);
+
+    qemu_check_nic_model(&nd_table[1], "xgmac");
+    dev = qdev_create(NULL, "xgmac");
+    qdev_set_nic_properties(dev, &nd_table[1]);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff51000);
+    sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[80]);
+    sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[81]);
+    sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[82]);
+
+    highbank_binfo.ram_size = ram_size;
+    highbank_binfo.kernel_filename = kernel_filename;
+    highbank_binfo.kernel_cmdline = kernel_cmdline;
+    highbank_binfo.initrd_filename = initrd_filename;
+    highbank_binfo.board_id = -1; /* provided by deviceTree */
+    arm_load_kernel(env, &highbank_binfo);
+}
+
+static QEMUMachine highbank_machine = {
+    .name = "highbank",
+    .desc = "highbank",
+    .init = highbank_init,
+    .use_scsi = 1,
+    .max_cpus = 4,
+    .no_vga = 1,
+};
+
+static void highbank_machine_init(void)
+{
+    qemu_register_machine(&highbank_machine);
+}
+
+machine_init(highbank_machine_init);
-- 
1.7.5.4