[Qemu-devel] [PATCH v5 08/15] qmp: add block_job_cancel command

[Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>]

Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 QMP/qmp-events.txt |   24 ++++++++++++++++++++++++
 blockdev.c         |   19 ++++++++++++++++++-
 hmp-commands.hx    |   14 ++++++++++++++
 hmp.c              |   10 ++++++++++
 hmp.h              |    1 +
 monitor.c          |    3 +++
 monitor.h          |    1 +
 qapi-schema.json   |   29 +++++++++++++++++++++++++++++
 qmp-commands.hx    |    6 ++++++
 trace-events       |    1 +
 10 files changed, 107 insertions(+), 1 deletions(-)

diff --git a/QMP/qmp-events.txt b/QMP/qmp-events.txt
index 0cd2275..06cb404 100644
--- a/QMP/qmp-events.txt
+++ b/QMP/qmp-events.txt
@@ -293,3 +293,27 @@ Example:
                "len": 10737418240, "offset": 10737418240,
                "speed": 0 },
      "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
+
+
+BLOCK_JOB_CANCELLED
+-------------------
+
+Emitted when a block job has been cancelled.
+
+Data:
+
+- "type":     Job type ("stream" for image streaming, json-string)
+- "device":   Device name (json-string)
+- "len":      Maximum progress value (json-int)
+- "offset":   Current progress value (json-int)
+              On success this is equal to len.
+              On failure this is less than len.
+- "speed":    Rate limit, bytes per second (json-int)
+
+Example:
+
+{ "event": "BLOCK_JOB_CANCELLED",
+     "data": { "type": "stream", "device": "virtio-disk0",
+               "len": 10737418240, "offset": 134217728,
+               "speed": 0 },
+     "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
diff --git a/blockdev.c b/blockdev.c
index 2dfca40..35de3bc 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -911,7 +911,11 @@ static void block_stream_cb(void *opaque, int ret)
         qdict_put(dict, "error", qstring_from_str(strerror(-ret)));
     }
 
-    monitor_protocol_event(QEVENT_BLOCK_JOB_COMPLETED, obj);
+    if (block_job_is_cancelled(bs->job)) {
+        monitor_protocol_event(QEVENT_BLOCK_JOB_CANCELLED, obj);
+    } else {
+        monitor_protocol_event(QEVENT_BLOCK_JOB_COMPLETED, obj);
+    }
     qobject_decref(obj);
 }
 
@@ -972,3 +976,16 @@ void qmp_block_job_set_speed(const char *device, int64_t value, Error **errp)
         error_set(errp, QERR_NOT_SUPPORTED);
     }
 }
+
+void qmp_block_job_cancel(const char *device, Error **errp)
+{
+    BlockJob *job = find_block_job(device);
+
+    if (!job) {
+        error_set(errp, QERR_DEVICE_NOT_ACTIVE, device);
+        return;
+    }
+
+    trace_qmp_block_job_cancel(job);
+    block_job_cancel(job);
+}
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 12b8433..b991ee0 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -98,6 +98,20 @@ Set maximum speed for a background block operation.
 ETEXI
 
     {
+        .name       = "block_job_cancel",
+        .args_type  = "device:B",
+        .params     = "device",
+        .help       = "stop an active block streaming operation",
+        .mhandler.cmd = hmp_block_job_cancel,
+    },
+
+STEXI
+@item block_job_cancel
+@findex block_job_cancel
+Stop an active block streaming operation.
+ETEXI
+
+    {
         .name       = "eject",
         .args_type  = "force:-f,device:B",
         .params     = "[-f] device",
diff --git a/hmp.c b/hmp.c
index 1144d53..851885b 100644
--- a/hmp.c
+++ b/hmp.c
@@ -701,3 +701,13 @@ void hmp_block_job_set_speed(Monitor *mon, const QDict *qdict)
 
     hmp_handle_error(mon, &error);
 }
+
+void hmp_block_job_cancel(Monitor *mon, const QDict *qdict)
+{
+    Error *error = NULL;
+    const char *device = qdict_get_str(qdict, "device");
+
+    qmp_block_job_cancel(device, &error);
+
+    hmp_handle_error(mon, &error);
+}
diff --git a/hmp.h b/hmp.h
index 2c871ea..0ad2004 100644
--- a/hmp.h
+++ b/hmp.h
@@ -51,5 +51,6 @@ void hmp_migrate_set_downtime(Monitor *mon, const QDict *qdict);
 void hmp_migrate_set_speed(Monitor *mon, const QDict *qdict);
 void hmp_block_stream(Monitor *mon, const QDict *qdict);
 void hmp_block_job_set_speed(Monitor *mon, const QDict *qdict);
+void hmp_block_job_cancel(Monitor *mon, const QDict *qdict);
 
 #endif
diff --git a/monitor.c b/monitor.c
index bb42580..01850ca 100644
--- a/monitor.c
+++ b/monitor.c
@@ -482,6 +482,9 @@ void monitor_protocol_event(MonitorEvent event, QObject *data)
         case QEVENT_BLOCK_JOB_COMPLETED:
             event_name = "BLOCK_JOB_COMPLETED";
             break;
+        case QEVENT_BLOCK_JOB_CANCELLED:
+            event_name = "BLOCK_JOB_CANCELLED";
+            break;
         default:
             abort();
             break;
diff --git a/monitor.h b/monitor.h
index 7324236..86c997d 100644
--- a/monitor.h
+++ b/monitor.h
@@ -36,6 +36,7 @@ typedef enum MonitorEvent {
     QEVENT_SPICE_INITIALIZED,
     QEVENT_SPICE_DISCONNECTED,
     QEVENT_BLOCK_JOB_COMPLETED,
+    QEVENT_BLOCK_JOB_CANCELLED,
     QEVENT_MAX,
 } MonitorEvent;
 
diff --git a/qapi-schema.json b/qapi-schema.json
index 5872096..3d23ce2 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1329,3 +1329,32 @@
 ##
 { 'command': 'block_job_set_speed',
   'data': { 'device': 'str', 'value': 'int' } }
+
+##
+# @block_job_cancel:
+#
+# Stop an active block streaming operation.
+#
+# This command returns immediately after marking the active block streaming
+# operation for cancellation.  It is an error to call this command if no
+# operation is in progress.
+#
+# The operation will cancel as soon as possible and then emit the
+# BLOCK_JOB_CANCELLED event.  Before that happens the job is still visible when
+# enumerated using query-block-jobs.
+#
+# The image file retains its backing file unless the streaming operation happens
+# to complete just as it is being cancelled.
+#
+# A new block streaming operation can be started at a later time to finish
+# copying all data from the backing file.
+#
+# @device: the device name
+#
+# Returns: Nothing on success
+#          If streaming is not active on this device, DeviceNotActive
+#          If cancellation already in progress, DeviceInUse
+#
+# Since: 1.1
+##
+{ 'command': 'block_job_cancel', 'data': { 'device': 'str' } }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index dc6bc2e..0a0335f 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -667,6 +667,12 @@ EQMP
     },
 
     {
+        .name       = "block_job_cancel",
+        .args_type  = "device:B",
+        .mhandler.cmd_new = qmp_marshal_input_block_job_cancel,
+    },
+
+    {
         .name       = "blockdev-snapshot-sync",
         .args_type  = "device:B,snapshot-file:s,format:s?",
         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync,
diff --git a/trace-events b/trace-events
index 6ff0d43..196a872 100644
--- a/trace-events
+++ b/trace-events
@@ -75,6 +75,7 @@ stream_one_iteration(void *s, int64_t sector_num, int nb_sectors, int is_allocat
 stream_start(void *bs, void *base, void *s, void *co, void *opaque) "bs %p base %p s %p co %p opaque %p"
 
 # blockdev.c
+qmp_block_job_cancel(void *job) "job %p"
 block_stream_cb(void *bs, void *job, int ret) "bs %p job %p ret %d"
 qmp_block_stream(void *bs, void *job) "bs %p job %p"
 
-- 
1.7.7.3