* [Qemu-devel] [PATCH 01/14] vnc: Simplify vnc_display_password()
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 02/14] qapi: Convert set_password Luiz Capitulino
` (13 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Drop the qerror_report() call from it and let its callers set the error
themselves. This also allows for dropping the 'ret' variable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
console.h | 1 -
monitor.c | 7 ++++++-
ui/vnc.c | 14 ++++----------
3 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/console.h b/console.h
index 9466886..be3b7c8 100644
--- a/console.h
+++ b/console.h
@@ -384,7 +384,6 @@ int vnc_display_pw_expire(DisplayState *ds, time_t expires);
#else
static inline int vnc_display_password(DisplayState *ds, const char *password)
{
- qerror_report(QERR_FEATURE_DISABLED, "vnc");
return -ENODEV;
}
static inline int vnc_display_pw_expire(DisplayState *ds, time_t expires)
diff --git a/monitor.c b/monitor.c
index 7334401..759c133 100644
--- a/monitor.c
+++ b/monitor.c
@@ -929,7 +929,12 @@ static int set_password(Monitor *mon, const QDict *qdict, QObject **ret_data)
}
/* Note that setting an empty password will not disable login through
* this interface. */
- return vnc_display_password(NULL, password);
+ rc = vnc_display_password(NULL, password);
+ if (rc < 0) {
+ qerror_report(QERR_SET_PASSWD_FAILED);
+ return -1;
+ }
+ return 0;
}
qerror_report(QERR_INVALID_PARAMETER, "protocol");
diff --git a/ui/vnc.c b/ui/vnc.c
index 1869a7a..16b79ec 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -2686,19 +2686,16 @@ int vnc_display_disable_login(DisplayState *ds)
int vnc_display_password(DisplayState *ds, const char *password)
{
- int ret = 0;
VncDisplay *vs = ds ? (VncDisplay *)ds->opaque : vnc_display;
if (!vs) {
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
if (!password) {
/* This is not the intention of this interface but err on the side
of being safe */
- ret = vnc_display_disable_login(ds);
- goto out;
+ return vnc_display_disable_login(ds);
}
if (vs->password) {
@@ -2707,11 +2704,8 @@ int vnc_display_password(DisplayState *ds, const char *password)
}
vs->password = g_strdup(password);
vs->auth = VNC_AUTH_VNC;
-out:
- if (ret != 0) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- }
- return ret;
+
+ return 0;
}
int vnc_display_pw_expire(DisplayState *ds, time_t expires)
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 02/14] qapi: Convert set_password
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 01/14] vnc: Simplify vnc_display_password() Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 03/14] qapi: Convert expire_password Luiz Capitulino
` (12 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
hmp-commands.hx | 3 +-
hmp.c | 11 ++++++++++
hmp.h | 1 +
monitor.c | 57 ------------------------------------------------------
qapi-schema.json | 29 +++++++++++++++++++++++++++
qmp-commands.hx | 5 +---
qmp.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 97 insertions(+), 63 deletions(-)
diff --git a/hmp-commands.hx b/hmp-commands.hx
index a586498..4355a6f 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1219,8 +1219,7 @@ ETEXI
.args_type = "protocol:s,password:s,connected:s?",
.params = "protocol password action-if-connected",
.help = "set spice/vnc password",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = set_password,
+ .mhandler.cmd = hmp_set_password,
},
STEXI
diff --git a/hmp.c b/hmp.c
index 8a77780..888e1b9 100644
--- a/hmp.c
+++ b/hmp.c
@@ -681,3 +681,14 @@ void hmp_migrate_set_speed(Monitor *mon, const QDict *qdict)
int64_t value = qdict_get_int(qdict, "value");
qmp_migrate_set_speed(value, NULL);
}
+
+void hmp_set_password(Monitor *mon, const QDict *qdict)
+{
+ const char *protocol = qdict_get_str(qdict, "protocol");
+ const char *password = qdict_get_str(qdict, "password");
+ const char *connected = qdict_get_try_str(qdict, "connected");
+ Error *err = NULL;
+
+ qmp_set_password(protocol, password, !!connected, connected, &err);
+ hmp_handle_error(mon, &err);
+}
diff --git a/hmp.h b/hmp.h
index 093242d..4ed0fee 100644
--- a/hmp.h
+++ b/hmp.h
@@ -49,5 +49,6 @@ void hmp_snapshot_blkdev(Monitor *mon, const QDict *qdict);
void hmp_migrate_cancel(Monitor *mon, const QDict *qdict);
void hmp_migrate_set_downtime(Monitor *mon, const QDict *qdict);
void hmp_migrate_set_speed(Monitor *mon, const QDict *qdict);
+void hmp_set_password(Monitor *mon, const QDict *qdict);
#endif
diff --git a/monitor.c b/monitor.c
index 759c133..1f5d343 100644
--- a/monitor.c
+++ b/monitor.c
@@ -884,63 +884,6 @@ static int do_change(Monitor *mon, const QDict *qdict, QObject **ret_data)
return ret;
}
-static int set_password(Monitor *mon, const QDict *qdict, QObject **ret_data)
-{
- const char *protocol = qdict_get_str(qdict, "protocol");
- const char *password = qdict_get_str(qdict, "password");
- const char *connected = qdict_get_try_str(qdict, "connected");
- int disconnect_if_connected = 0;
- int fail_if_connected = 0;
- int rc;
-
- if (connected) {
- if (strcmp(connected, "fail") == 0) {
- fail_if_connected = 1;
- } else if (strcmp(connected, "disconnect") == 0) {
- disconnect_if_connected = 1;
- } else if (strcmp(connected, "keep") == 0) {
- /* nothing */
- } else {
- qerror_report(QERR_INVALID_PARAMETER, "connected");
- return -1;
- }
- }
-
- if (strcmp(protocol, "spice") == 0) {
- if (!using_spice) {
- /* correct one? spice isn't a device ,,, */
- qerror_report(QERR_DEVICE_NOT_ACTIVE, "spice");
- return -1;
- }
- rc = qemu_spice_set_passwd(password, fail_if_connected,
- disconnect_if_connected);
- if (rc != 0) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- return -1;
- }
- return 0;
- }
-
- if (strcmp(protocol, "vnc") == 0) {
- if (fail_if_connected || disconnect_if_connected) {
- /* vnc supports "connected=keep" only */
- qerror_report(QERR_INVALID_PARAMETER, "connected");
- return -1;
- }
- /* Note that setting an empty password will not disable login through
- * this interface. */
- rc = vnc_display_password(NULL, password);
- if (rc < 0) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- return -1;
- }
- return 0;
- }
-
- qerror_report(QERR_INVALID_PARAMETER, "protocol");
- return -1;
-}
-
static int expire_password(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
const char *protocol = qdict_get_str(qdict, "protocol");
diff --git a/qapi-schema.json b/qapi-schema.json
index 44cf764..092ff6e 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1275,3 +1275,32 @@
{ 'command': 'qom-set',
'data': { 'path': 'str', 'property': 'str', 'value': 'visitor' },
'gen': 'no' }
+
+##
+# @set_password:
+#
+# Sets the password of a remote display session.
+#
+# @protocol: `vnc' to modify the VNC server password
+# `spice' to modify the Spice server password
+#
+# @password: the new password
+#
+# @connected: #optional how to handle existing clients when changing the
+# password. If nothing is specified, defaults to `keep'
+# `fail' to fail the command if clients are connected
+# `disconnect' to disconnect existing clients
+# `keep' to maintain existing clients
+#
+# Returns: Nothing on success
+# If Spice is not enabled, DeviceNotFound
+# If @protocol does not support connected, InvalidParameter
+# If @protocol is invalid, InvalidParameter
+# If any other error occurs, SetPasswdFailed
+#
+# Notes: If VNC is not enabled, SetPasswdFailed is returned.
+#
+# Since: 0.14.0
+##
+{ 'command': 'set_password',
+ 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 7e3f4b9..eadad05 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -851,10 +851,7 @@ EQMP
{
.name = "set_password",
.args_type = "protocol:s,password:s,connected:s?",
- .params = "protocol password action-if-connected",
- .help = "set spice/vnc password",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = set_password,
+ .mhandler.cmd_new = qmp_marshal_input_set_password,
},
SQMP
diff --git a/qmp.c b/qmp.c
index c74dde6..9ef43a8 100644
--- a/qmp.c
+++ b/qmp.c
@@ -16,6 +16,8 @@
#include "qemu-common.h"
#include "sysemu.h"
#include "qmp-commands.h"
+#include "ui/qemu-spice.h"
+#include "ui/vnc.h"
#include "kvm.h"
#include "arch_init.h"
#include "hw/qdev.h"
@@ -249,3 +251,55 @@ out:
return 0;
}
+
+void qmp_set_password(const char *protocol, const char *password,
+ bool has_connected, const char *connected, Error **errp)
+{
+ int disconnect_if_connected = 0;
+ int fail_if_connected = 0;
+ int rc;
+
+ if (has_connected) {
+ if (strcmp(connected, "fail") == 0) {
+ fail_if_connected = 1;
+ } else if (strcmp(connected, "disconnect") == 0) {
+ disconnect_if_connected = 1;
+ } else if (strcmp(connected, "keep") == 0) {
+ /* nothing */
+ } else {
+ error_set(errp, QERR_INVALID_PARAMETER, "connected");
+ return;
+ }
+ }
+
+ if (strcmp(protocol, "spice") == 0) {
+ if (!using_spice) {
+ /* correct one? spice isn't a device ,,, */
+ error_set(errp, QERR_DEVICE_NOT_ACTIVE, "spice");
+ return;
+ }
+ rc = qemu_spice_set_passwd(password, fail_if_connected,
+ disconnect_if_connected);
+ if (rc != 0) {
+ error_set(errp, QERR_SET_PASSWD_FAILED);
+ }
+ return;
+ }
+
+ if (strcmp(protocol, "vnc") == 0) {
+ if (fail_if_connected || disconnect_if_connected) {
+ /* vnc supports "connected=keep" only */
+ error_set(errp, QERR_INVALID_PARAMETER, "connected");
+ return;
+ }
+ /* Note that setting an empty password will not disable login through
+ * this interface. */
+ rc = vnc_display_password(NULL, password);
+ if (rc < 0) {
+ error_set(errp, QERR_SET_PASSWD_FAILED);
+ }
+ return;
+ }
+
+ error_set(errp, QERR_INVALID_PARAMETER, "protocol");
+}
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 03/14] qapi: Convert expire_password
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 01/14] vnc: Simplify vnc_display_password() Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 02/14] qapi: Convert set_password Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 04/14] block: eject_device(): Use error_set() Luiz Capitulino
` (11 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
console.h | 2 --
hmp-commands.hx | 3 +--
hmp.c | 10 ++++++++++
hmp.h | 1 +
monitor.c | 39 ---------------------------------------
qapi-schema.json | 27 +++++++++++++++++++++++++++
qmp-commands.hx | 5 +----
qmp.c | 40 ++++++++++++++++++++++++++++++++++++++++
8 files changed, 80 insertions(+), 47 deletions(-)
diff --git a/console.h b/console.h
index be3b7c8..6ba0d5d 100644
--- a/console.h
+++ b/console.h
@@ -4,7 +4,6 @@
#include "qemu-char.h"
#include "qdict.h"
#include "notify.h"
-#include "qerror.h"
#include "monitor.h"
/* keyboard/mouse support */
@@ -388,7 +387,6 @@ static inline int vnc_display_password(DisplayState *ds, const char *password)
}
static inline int vnc_display_pw_expire(DisplayState *ds, time_t expires)
{
- qerror_report(QERR_FEATURE_DISABLED, "vnc");
return -ENODEV;
};
#endif
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 4355a6f..047fba2 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1239,8 +1239,7 @@ ETEXI
.args_type = "protocol:s,time:s",
.params = "protocol time",
.help = "set spice/vnc password expire-time",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = expire_password,
+ .mhandler.cmd = hmp_expire_password,
},
STEXI
diff --git a/hmp.c b/hmp.c
index 888e1b9..081acab 100644
--- a/hmp.c
+++ b/hmp.c
@@ -692,3 +692,13 @@ void hmp_set_password(Monitor *mon, const QDict *qdict)
qmp_set_password(protocol, password, !!connected, connected, &err);
hmp_handle_error(mon, &err);
}
+
+void hmp_expire_password(Monitor *mon, const QDict *qdict)
+{
+ const char *protocol = qdict_get_str(qdict, "protocol");
+ const char *whenstr = qdict_get_str(qdict, "time");
+ Error *err = NULL;
+
+ qmp_expire_password(protocol, whenstr, &err);
+ hmp_handle_error(mon, &err);
+}
diff --git a/hmp.h b/hmp.h
index 4ed0fee..575f529 100644
--- a/hmp.h
+++ b/hmp.h
@@ -50,5 +50,6 @@ void hmp_migrate_cancel(Monitor *mon, const QDict *qdict);
void hmp_migrate_set_downtime(Monitor *mon, const QDict *qdict);
void hmp_migrate_set_speed(Monitor *mon, const QDict *qdict);
void hmp_set_password(Monitor *mon, const QDict *qdict);
+void hmp_expire_password(Monitor *mon, const QDict *qdict);
#endif
diff --git a/monitor.c b/monitor.c
index 1f5d343..aa7259c 100644
--- a/monitor.c
+++ b/monitor.c
@@ -884,45 +884,6 @@ static int do_change(Monitor *mon, const QDict *qdict, QObject **ret_data)
return ret;
}
-static int expire_password(Monitor *mon, const QDict *qdict, QObject **ret_data)
-{
- const char *protocol = qdict_get_str(qdict, "protocol");
- const char *whenstr = qdict_get_str(qdict, "time");
- time_t when;
- int rc;
-
- if (strcmp(whenstr, "now") == 0) {
- when = 0;
- } else if (strcmp(whenstr, "never") == 0) {
- when = TIME_MAX;
- } else if (whenstr[0] == '+') {
- when = time(NULL) + strtoull(whenstr+1, NULL, 10);
- } else {
- when = strtoull(whenstr, NULL, 10);
- }
-
- if (strcmp(protocol, "spice") == 0) {
- if (!using_spice) {
- /* correct one? spice isn't a device ,,, */
- qerror_report(QERR_DEVICE_NOT_ACTIVE, "spice");
- return -1;
- }
- rc = qemu_spice_set_pw_expire(when);
- if (rc != 0) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- return -1;
- }
- return 0;
- }
-
- if (strcmp(protocol, "vnc") == 0) {
- return vnc_display_pw_expire(NULL, when);
- }
-
- qerror_report(QERR_INVALID_PARAMETER, "protocol");
- return -1;
-}
-
static int add_graphics_client(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
const char *protocol = qdict_get_str(qdict, "protocol");
diff --git a/qapi-schema.json b/qapi-schema.json
index 092ff6e..dc92a79 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1304,3 +1304,30 @@
##
{ 'command': 'set_password',
'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
+
+##
+# @expire_password:
+#
+# Expire the password of a remote display server.
+#
+# @protocol: the name of the remote display protocol `vnc' or `spice'
+#
+# @time: when to expire the password.
+# `now' to expire the password immediately
+# `never' to cancel password expiration
+# `+INT' where INT is the number of seconds from now (integer)
+# `INT' where INT is the absolute time in seconds
+#
+# Returns: Nothing on success
+# If @protocol is `spice' and Spice is not active, DeviceNotFound
+# If an error occurs setting password expiration, SetPasswdFailed
+# If @protocol is not `spice' or 'vnc', InvalidParameter
+#
+# Since: 0.14.0
+#
+# Notes: Time is relative to the server and currently there is no way to
+# coordinate server time with client time. It is not recommended to
+# use the absolute time version of the @time parameter unless you're
+# sure you are on the same machine as the QEMU instance.
+##
+{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index eadad05..d7264b2 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -877,10 +877,7 @@ EQMP
{
.name = "expire_password",
.args_type = "protocol:s,time:s",
- .params = "protocol time",
- .help = "set spice/vnc password expire-time",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = expire_password,
+ .mhandler.cmd_new = qmp_marshal_input_expire_password,
},
SQMP
diff --git a/qmp.c b/qmp.c
index 9ef43a8..8b7b379 100644
--- a/qmp.c
+++ b/qmp.c
@@ -303,3 +303,43 @@ void qmp_set_password(const char *protocol, const char *password,
error_set(errp, QERR_INVALID_PARAMETER, "protocol");
}
+
+void qmp_expire_password(const char *protocol, const char *whenstr,
+ Error **errp)
+{
+ time_t when;
+ int rc;
+
+ if (strcmp(whenstr, "now") == 0) {
+ when = 0;
+ } else if (strcmp(whenstr, "never") == 0) {
+ when = TIME_MAX;
+ } else if (whenstr[0] == '+') {
+ when = time(NULL) + strtoull(whenstr+1, NULL, 10);
+ } else {
+ when = strtoull(whenstr, NULL, 10);
+ }
+
+ if (strcmp(protocol, "spice") == 0) {
+ if (!using_spice) {
+ /* correct one? spice isn't a device ,,, */
+ error_set(errp, QERR_DEVICE_NOT_ACTIVE, "spice");
+ return;
+ }
+ rc = qemu_spice_set_pw_expire(when);
+ if (rc != 0) {
+ error_set(errp, QERR_SET_PASSWD_FAILED);
+ }
+ return;
+ }
+
+ if (strcmp(protocol, "vnc") == 0) {
+ rc = vnc_display_pw_expire(NULL, when);
+ if (rc != 0) {
+ error_set(errp, QERR_SET_PASSWD_FAILED);
+ }
+ return;
+ }
+
+ error_set(errp, QERR_INVALID_PARAMETER, "protocol");
+}
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 04/14] block: eject_device(): Use error_set()
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (2 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 03/14] qapi: Convert expire_password Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 05/14] qapi: Convert eject Luiz Capitulino
` (10 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Also drops the leftover 'mon' argument.
This is a preparation for the next commits which will port the
eject and change commands to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
blockdev.c | 30 ++++++++++++++++++++++--------
1 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index c832782..9ee5bae 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -665,21 +665,22 @@ void qmp_blockdev_snapshot_sync(const char *device, const char *snapshot_file,
}
}
-static int eject_device(Monitor *mon, BlockDriverState *bs, int force)
+static void eject_device(BlockDriverState *bs, int force, Error **errp)
{
if (!bdrv_dev_has_removable_media(bs)) {
- qerror_report(QERR_DEVICE_NOT_REMOVABLE, bdrv_get_device_name(bs));
- return -1;
+ error_set(errp, QERR_DEVICE_NOT_REMOVABLE, bdrv_get_device_name(bs));
+ return;
}
+
if (bdrv_dev_is_medium_locked(bs) && !bdrv_dev_is_tray_open(bs)) {
bdrv_dev_eject_request(bs, force);
if (!force) {
- qerror_report(QERR_DEVICE_LOCKED, bdrv_get_device_name(bs));
- return -1;
+ error_set(errp, QERR_DEVICE_LOCKED, bdrv_get_device_name(bs));
+ return;
}
}
+
bdrv_close(bs);
- return 0;
}
int do_eject(Monitor *mon, const QDict *qdict, QObject **ret_data)
@@ -687,13 +688,22 @@ int do_eject(Monitor *mon, const QDict *qdict, QObject **ret_data)
BlockDriverState *bs;
int force = qdict_get_try_bool(qdict, "force", 0);
const char *filename = qdict_get_str(qdict, "device");
+ Error *err = NULL;
bs = bdrv_find(filename);
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, filename);
return -1;
}
- return eject_device(mon, bs, force);
+
+ eject_device(bs, force, &err);
+ if (error_is_set(&err)) {
+ qerror_report_err(err);
+ error_free(err);
+ return -1;
+ }
+
+ return 0;
}
void qmp_block_passwd(const char *device, const char *password, Error **errp)
@@ -723,6 +733,7 @@ int do_change_block(Monitor *mon, const char *device,
BlockDriverState *bs;
BlockDriver *drv = NULL;
int bdrv_flags;
+ Error *err = NULL;
bs = bdrv_find(device);
if (!bs) {
@@ -736,7 +747,10 @@ int do_change_block(Monitor *mon, const char *device,
return -1;
}
}
- if (eject_device(mon, bs, 0) < 0) {
+ eject_device(bs, 0, &err);
+ if (error_is_set(&err)) {
+ qerror_report_err(err);
+ error_free(err);
return -1;
}
bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR;
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 05/14] qapi: Convert eject
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (3 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 04/14] block: eject_device(): Use error_set() Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 06/14] monitor: expose readline state Luiz Capitulino
` (9 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
blockdev.c | 20 +++++---------------
blockdev.h | 1 -
hmp-commands.hx | 3 +--
hmp.c | 10 ++++++++++
hmp.h | 1 +
qapi-schema.json | 21 +++++++++++++++++++++
qmp-commands.hx | 5 +----
7 files changed, 39 insertions(+), 22 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 9ee5bae..124fbe6 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -683,27 +683,17 @@ static void eject_device(BlockDriverState *bs, int force, Error **errp)
bdrv_close(bs);
}
-int do_eject(Monitor *mon, const QDict *qdict, QObject **ret_data)
+void qmp_eject(const char *device, bool has_force, bool force, Error **errp)
{
BlockDriverState *bs;
- int force = qdict_get_try_bool(qdict, "force", 0);
- const char *filename = qdict_get_str(qdict, "device");
- Error *err = NULL;
- bs = bdrv_find(filename);
+ bs = bdrv_find(device);
if (!bs) {
- qerror_report(QERR_DEVICE_NOT_FOUND, filename);
- return -1;
- }
-
- eject_device(bs, force, &err);
- if (error_is_set(&err)) {
- qerror_report_err(err);
- error_free(err);
- return -1;
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+ return;
}
- return 0;
+ eject_device(bs, force, errp);
}
void qmp_block_passwd(const char *device, const char *password, Error **errp)
diff --git a/blockdev.h b/blockdev.h
index f1b6396..1937b28 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -58,7 +58,6 @@ DriveInfo *drive_init(QemuOpts *arg, int default_to_scsi);
DriveInfo *add_init_drive(const char *opts);
void do_commit(Monitor *mon, const QDict *qdict);
-int do_eject(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_change_block(Monitor *mon, const char *device,
const char *filename, const char *fmt);
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 047fba2..364623c 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -75,8 +75,7 @@ ETEXI
.args_type = "force:-f,device:B",
.params = "[-f] device",
.help = "eject a removable medium (use -f to force it)",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_eject,
+ .mhandler.cmd = hmp_eject,
},
STEXI
diff --git a/hmp.c b/hmp.c
index 081acab..a0752f5 100644
--- a/hmp.c
+++ b/hmp.c
@@ -702,3 +702,13 @@ void hmp_expire_password(Monitor *mon, const QDict *qdict)
qmp_expire_password(protocol, whenstr, &err);
hmp_handle_error(mon, &err);
}
+
+void hmp_eject(Monitor *mon, const QDict *qdict)
+{
+ int force = qdict_get_try_bool(qdict, "force", 0);
+ const char *device = qdict_get_str(qdict, "device");
+ Error *err = NULL;
+
+ qmp_eject(device, true, force, &err);
+ hmp_handle_error(mon, &err);
+}
diff --git a/hmp.h b/hmp.h
index 575f529..29dbf93 100644
--- a/hmp.h
+++ b/hmp.h
@@ -51,5 +51,6 @@ void hmp_migrate_set_downtime(Monitor *mon, const QDict *qdict);
void hmp_migrate_set_speed(Monitor *mon, const QDict *qdict);
void hmp_set_password(Monitor *mon, const QDict *qdict);
void hmp_expire_password(Monitor *mon, const QDict *qdict);
+void hmp_eject(Monitor *mon, const QDict *qdict);
#endif
diff --git a/qapi-schema.json b/qapi-schema.json
index dc92a79..42682eb 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1331,3 +1331,24 @@
# sure you are on the same machine as the QEMU instance.
##
{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
+
+##
+# @eject:
+#
+# Ejects a device from a removable drive.
+#
+# @device: The name of the device
+#
+# @force: @optional If true, eject regardless of whether the drive is locked.
+# If not specified, the default value is false.
+#
+# Returns: Nothing on success
+# If @device is not a valid block device, DeviceNotFound
+# If @device is not removable and @force is false, DeviceNotRemovable
+# If @force is false and @device is locked, DeviceLocked
+#
+# Notes: Ejecting a device will no media results in success
+#
+# Since: 0.14.0
+##
+{ 'command': 'eject', 'data': {'device': 'str', '*force': 'bool'} }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index d7264b2..185beba 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -84,10 +84,7 @@ EQMP
{
.name = "eject",
.args_type = "force:-f,device:B",
- .params = "[-f] device",
- .help = "eject a removable medium (use -f to force it)",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_eject,
+ .mhandler.cmd_new = qmp_marshal_input_eject,
},
SQMP
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 06/14] monitor: expose readline state
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (4 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 05/14] qapi: Convert eject Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 07/14] qapi: Introduce change-vnc-password Luiz Capitulino
` (8 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
From: Anthony Liguori <aliguori@us.ibm.com>
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to
deal with HMP right now like readline support. Export it from the monitor so
we can consume it in hmp.c.
In short time, hmp.c will take over all of the readline bits.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
monitor.c | 11 ++++++++---
monitor.h | 5 +++++
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/monitor.c b/monitor.c
index aa7259c..bd4bc4f 100644
--- a/monitor.c
+++ b/monitor.c
@@ -227,7 +227,7 @@ int monitor_cur_is_qmp(void)
return cur_mon && monitor_ctrl_mode(cur_mon);
}
-static void monitor_read_command(Monitor *mon, int show_prompt)
+void monitor_read_command(Monitor *mon, int show_prompt)
{
if (!mon->rs)
return;
@@ -237,8 +237,8 @@ static void monitor_read_command(Monitor *mon, int show_prompt)
readline_show_prompt(mon->rs);
}
-static int monitor_read_password(Monitor *mon, ReadLineFunc *readline_func,
- void *opaque)
+int monitor_read_password(Monitor *mon, ReadLineFunc *readline_func,
+ void *opaque)
{
if (monitor_ctrl_mode(mon)) {
qerror_report(QERR_MISSING_PARAMETER, "password");
@@ -4664,6 +4664,11 @@ static void bdrv_password_cb(Monitor *mon, const char *password, void *opaque)
monitor_read_command(mon, 1);
}
+ReadLineState *monitor_get_rs(Monitor *mon)
+{
+ return mon->rs;
+}
+
int monitor_read_bdrv_key_start(Monitor *mon, BlockDriverState *bs,
BlockDriverCompletionFunc *completion_cb,
void *opaque)
diff --git a/monitor.h b/monitor.h
index cfa2f67..887c472 100644
--- a/monitor.h
+++ b/monitor.h
@@ -6,6 +6,7 @@
#include "qerror.h"
#include "qdict.h"
#include "block.h"
+#include "readline.h"
extern Monitor *cur_mon;
extern Monitor *default_mon;
@@ -66,6 +67,10 @@ int monitor_get_cpu_index(void);
typedef void (MonitorCompletion)(void *opaque, QObject *ret_data);
void monitor_set_error(Monitor *mon, QError *qerror);
+void monitor_read_command(Monitor *mon, int show_prompt);
+ReadLineState *monitor_get_rs(Monitor *mon);
+int monitor_read_password(Monitor *mon, ReadLineFunc *readline_func,
+ void *opaque);
int qmp_qom_set(Monitor *mon, const QDict *qdict, QObject **ret);
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 07/14] qapi: Introduce change-vnc-password
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (5 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 06/14] monitor: expose readline state Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 08/14] qerror: Extend QERR_DEVICE_ENCRYPTED Luiz Capitulino
` (7 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
New QMP command to change the VNC password.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
qapi-schema.json | 14 ++++++++++++++
qmp-commands.hx | 6 ++++++
qmp.c | 7 +++++++
3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/qapi-schema.json b/qapi-schema.json
index 42682eb..fe935a9 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1352,3 +1352,17 @@
# Since: 0.14.0
##
{ 'command': 'eject', 'data': {'device': 'str', '*force': 'bool'} }
+
+##
+# @change-vnc-password:
+#
+# Change the VNC server password.
+#
+# @target: the new password to use with VNC authentication
+#
+# Since: 1.1
+#
+# Notes: An empty password in this command will set the password to the empty
+# string. Existing clients are unaffected by executing this command.
+##
+{ 'command': 'change-vnc-password', 'data': {'password': 'str'} }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 185beba..886d589 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -2018,3 +2018,9 @@ EQMP
.args_type = "path:s,property:s",
.mhandler.cmd_new = qmp_qom_get,
},
+
+ {
+ .name = "change-vnc-password",
+ .args_type = "password:s",
+ .mhandler.cmd_new = qmp_marshal_input_change_vnc_password,
+ },
diff --git a/qmp.c b/qmp.c
index 8b7b379..f218485 100644
--- a/qmp.c
+++ b/qmp.c
@@ -343,3 +343,10 @@ void qmp_expire_password(const char *protocol, const char *whenstr,
error_set(errp, QERR_INVALID_PARAMETER, "protocol");
}
+
+void qmp_change_vnc_password(const char *password, Error **errp)
+{
+ if (vnc_display_password(NULL, password) < 0) {
+ error_set(errp, QERR_SET_PASSWD_FAILED);
+ }
+}
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 08/14] qerror: Extend QERR_DEVICE_ENCRYPTED
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (6 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 07/14] qapi: Introduce change-vnc-password Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 09/14] qapi: Convert change Luiz Capitulino
` (6 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Include the name of the encrypted file.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
monitor.c | 3 ++-
qerror.h | 2 +-
qmp.c | 3 ++-
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/monitor.c b/monitor.c
index bd4bc4f..f85a9d2 100644
--- a/monitor.c
+++ b/monitor.c
@@ -4682,7 +4682,8 @@ int monitor_read_bdrv_key_start(Monitor *mon, BlockDriverState *bs,
}
if (monitor_ctrl_mode(mon)) {
- qerror_report(QERR_DEVICE_ENCRYPTED, bdrv_get_device_name(bs));
+ qerror_report(QERR_DEVICE_ENCRYPTED, bdrv_get_device_name(bs),
+ bdrv_get_encrypted_filename(bs));
return -1;
}
diff --git a/qerror.h b/qerror.h
index efda232..27800fe 100644
--- a/qerror.h
+++ b/qerror.h
@@ -70,7 +70,7 @@ QError *qobject_to_qerror(const QObject *obj);
"{ 'class': 'CommandDisabled', 'data': { 'name': %s } }"
#define QERR_DEVICE_ENCRYPTED \
- "{ 'class': 'DeviceEncrypted', 'data': { 'device': %s } }"
+ "{ 'class': 'DeviceEncrypted', 'data': { 'device': %s, 'filename': %s } }"
#define QERR_DEVICE_INIT_FAILED \
"{ 'class': 'DeviceInitFailed', 'data': { 'device': %s } }"
diff --git a/qmp.c b/qmp.c
index f218485..9c9ea62 100644
--- a/qmp.c
+++ b/qmp.c
@@ -135,7 +135,8 @@ static void encrypted_bdrv_it(void *opaque, BlockDriverState *bs)
Error **err = opaque;
if (!error_is_set(err) && bdrv_key_required(bs)) {
- error_set(err, QERR_DEVICE_ENCRYPTED, bdrv_get_device_name(bs));
+ error_set(err, QERR_DEVICE_ENCRYPTED, bdrv_get_device_name(bs),
+ bdrv_get_encrypted_filename(bs));
}
}
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 09/14] qapi: Convert change
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (7 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 08/14] qerror: Extend QERR_DEVICE_ENCRYPTED Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 10/14] qapi: Convert block_set_io_throttle Luiz Capitulino
` (5 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
blockdev.c | 54 +++++++++++++++++++++++++++-----------
blockdev.h | 5 ++-
hmp-commands.hx | 3 +-
hmp.c | 57 +++++++++++++++++++++++++++++++++++++++++
hmp.h | 1 +
monitor.c | 74 ------------------------------------------------------
qapi-schema.json | 36 ++++++++++++++++++++++++++
qmp-commands.hx | 5 +---
qmp.c | 44 ++++++++++++++++++++++++++++++++
9 files changed, 181 insertions(+), 98 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 124fbe6..8df78ce 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -717,8 +717,31 @@ void qmp_block_passwd(const char *device, const char *password, Error **errp)
}
}
-int do_change_block(Monitor *mon, const char *device,
- const char *filename, const char *fmt)
+static void qmp_bdrv_open_encrypted(BlockDriverState *bs, const char *filename,
+ int bdrv_flags, BlockDriver *drv,
+ const char *password, Error **errp)
+{
+ if (bdrv_open(bs, filename, bdrv_flags, drv) < 0) {
+ error_set(errp, QERR_OPEN_FILE_FAILED, filename);
+ return;
+ }
+
+ if (bdrv_key_required(bs)) {
+ if (password) {
+ if (bdrv_set_key(bs, password) < 0) {
+ error_set(errp, QERR_INVALID_PASSWORD);
+ }
+ } else {
+ error_set(errp, QERR_DEVICE_ENCRYPTED, bdrv_get_device_name(bs),
+ bdrv_get_encrypted_filename(bs));
+ }
+ } else if (password) {
+ error_set(errp, QERR_DEVICE_NOT_ENCRYPTED, bdrv_get_device_name(bs));
+ }
+}
+
+void qmp_change_blockdev(const char *device, const char *filename,
+ bool has_format, const char *format, Error **errp)
{
BlockDriverState *bs;
BlockDriver *drv = NULL;
@@ -727,29 +750,28 @@ int do_change_block(Monitor *mon, const char *device,
bs = bdrv_find(device);
if (!bs) {
- qerror_report(QERR_DEVICE_NOT_FOUND, device);
- return -1;
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+ return;
}
- if (fmt) {
- drv = bdrv_find_whitelisted_format(fmt);
+
+ if (format) {
+ drv = bdrv_find_whitelisted_format(format);
if (!drv) {
- qerror_report(QERR_INVALID_BLOCK_FORMAT, fmt);
- return -1;
+ error_set(errp, QERR_INVALID_BLOCK_FORMAT, format);
+ return;
}
}
+
eject_device(bs, 0, &err);
if (error_is_set(&err)) {
- qerror_report_err(err);
- error_free(err);
- return -1;
+ error_propagate(errp, err);
+ return;
}
+
bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR;
bdrv_flags |= bdrv_is_snapshot(bs) ? BDRV_O_SNAPSHOT : 0;
- if (bdrv_open(bs, filename, bdrv_flags, drv) < 0) {
- qerror_report(QERR_OPEN_FILE_FAILED, filename);
- return -1;
- }
- return monitor_read_bdrv_key_start(mon, bs, NULL, NULL);
+
+ qmp_bdrv_open_encrypted(bs, filename, bdrv_flags, drv, NULL, errp);
}
/* throttling disk I/O limits */
diff --git a/blockdev.h b/blockdev.h
index 1937b28..b077449 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -11,6 +11,7 @@
#define BLOCKDEV_H
#include "block.h"
+#include "error.h"
#include "qemu-queue.h"
void blockdev_mark_auto_del(BlockDriverState *bs);
@@ -57,9 +58,9 @@ DriveInfo *drive_init(QemuOpts *arg, int default_to_scsi);
DriveInfo *add_init_drive(const char *opts);
+void qmp_change_blockdev(const char *device, const char *filename,
+ bool has_format, const char *format, Error **errp);
void do_commit(Monitor *mon, const QDict *qdict);
-int do_change_block(Monitor *mon, const char *device,
- const char *filename, const char *fmt);
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_block_set_io_throttle(Monitor *mon,
const QDict *qdict, QObject **ret_data);
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 364623c..ac27ab3 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -107,8 +107,7 @@ ETEXI
.args_type = "device:B,target:F,arg:s?",
.params = "device filename [format]",
.help = "change a removable medium, optional format",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_change,
+ .mhandler.cmd = hmp_change,
},
STEXI
diff --git a/hmp.c b/hmp.c
index a0752f5..2b948aa 100644
--- a/hmp.c
+++ b/hmp.c
@@ -712,3 +712,60 @@ void hmp_eject(Monitor *mon, const QDict *qdict)
qmp_eject(device, true, force, &err);
hmp_handle_error(mon, &err);
}
+
+static void hmp_change_read_arg(Monitor *mon, const char *password,
+ void *opaque)
+{
+ qmp_change_vnc_password(password, NULL);
+ monitor_read_command(mon, 1);
+}
+
+static void cb_hmp_change_bdrv_pwd(Monitor *mon, const char *password,
+ void *opaque)
+{
+ Error *encryption_err = opaque;
+ Error *err = NULL;
+ const char *device;
+
+ device = error_get_field(encryption_err, "device");
+
+ qmp_block_passwd(device, password, &err);
+ hmp_handle_error(mon, &err);
+ error_free(encryption_err);
+
+ monitor_read_command(mon, 1);
+}
+
+void hmp_change(Monitor *mon, const QDict *qdict)
+{
+ const char *device = qdict_get_str(qdict, "device");
+ const char *target = qdict_get_str(qdict, "target");
+ const char *arg = qdict_get_try_str(qdict, "arg");
+ Error *err = NULL;
+
+ if (strcmp(device, "vnc") == 0 &&
+ (strcmp(target, "passwd") == 0 ||
+ strcmp(target, "password") == 0)) {
+ if (!arg) {
+ monitor_read_password(mon, hmp_change_read_arg, NULL);
+ return;
+ }
+ }
+
+ qmp_change(device, target, !!arg, arg, &err);
+ if (error_is_type(err, QERR_DEVICE_ENCRYPTED)) {
+ monitor_printf(mon, "%s (%s) is encrypted.\n",
+ error_get_field(err, "device"),
+ error_get_field(err, "filename"));
+ if (!monitor_get_rs(mon)) {
+ monitor_printf(mon,
+ "terminal does not support password prompting\n");
+ error_free(err);
+ return;
+ }
+ readline_start(monitor_get_rs(mon), "Password: ", 1,
+ cb_hmp_change_bdrv_pwd, err);
+ return;
+ }
+ hmp_handle_error(mon, &err);
+}
diff --git a/hmp.h b/hmp.h
index 29dbf93..621bdc2 100644
--- a/hmp.h
+++ b/hmp.h
@@ -52,5 +52,6 @@ void hmp_migrate_set_speed(Monitor *mon, const QDict *qdict);
void hmp_set_password(Monitor *mon, const QDict *qdict);
void hmp_expire_password(Monitor *mon, const QDict *qdict);
void hmp_eject(Monitor *mon, const QDict *qdict);
+void hmp_change(Monitor *mon, const QDict *qdict);
#endif
diff --git a/monitor.c b/monitor.c
index f85a9d2..187083c 100644
--- a/monitor.c
+++ b/monitor.c
@@ -810,80 +810,6 @@ static void do_trace_print_events(Monitor *mon)
trace_print_events((FILE *)mon, &monitor_fprintf);
}
-#ifdef CONFIG_VNC
-static int change_vnc_password(const char *password)
-{
- if (!password || !password[0]) {
- if (vnc_display_disable_login(NULL)) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- return -1;
- }
- return 0;
- }
-
- if (vnc_display_password(NULL, password) < 0) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- return -1;
- }
-
- return 0;
-}
-
-static void change_vnc_password_cb(Monitor *mon, const char *password,
- void *opaque)
-{
- change_vnc_password(password);
- monitor_read_command(mon, 1);
-}
-
-static int do_change_vnc(Monitor *mon, const char *target, const char *arg)
-{
- if (strcmp(target, "passwd") == 0 ||
- strcmp(target, "password") == 0) {
- if (arg) {
- char password[9];
- strncpy(password, arg, sizeof(password));
- password[sizeof(password) - 1] = '\0';
- return change_vnc_password(password);
- } else {
- return monitor_read_password(mon, change_vnc_password_cb, NULL);
- }
- } else {
- if (vnc_display_open(NULL, target) < 0) {
- qerror_report(QERR_VNC_SERVER_FAILED, target);
- return -1;
- }
- }
-
- return 0;
-}
-#else
-static int do_change_vnc(Monitor *mon, const char *target, const char *arg)
-{
- qerror_report(QERR_FEATURE_DISABLED, "vnc");
- return -ENODEV;
-}
-#endif
-
-/**
- * do_change(): Change a removable medium, or VNC configuration
- */
-static int do_change(Monitor *mon, const QDict *qdict, QObject **ret_data)
-{
- const char *device = qdict_get_str(qdict, "device");
- const char *target = qdict_get_str(qdict, "target");
- const char *arg = qdict_get_try_str(qdict, "arg");
- int ret;
-
- if (strcmp(device, "vnc") == 0) {
- ret = do_change_vnc(mon, target, arg);
- } else {
- ret = do_change_block(mon, device, target, arg);
- }
-
- return ret;
-}
-
static int add_graphics_client(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
const char *protocol = qdict_get_str(qdict, "protocol");
diff --git a/qapi-schema.json b/qapi-schema.json
index fe935a9..eb20dac 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1366,3 +1366,39 @@
# string. Existing clients are unaffected by executing this command.
##
{ 'command': 'change-vnc-password', 'data': {'password': 'str'} }
+
+##
+# @change:
+#
+# This command is multiple commands multiplexed together.
+#
+# @device: This is normally the name of a block device but it may also be 'vnc'.
+# when it's 'vnc', then sub command depends on @target
+#
+# @target: If @device is a block device, then this is the new filename.
+# If @device is 'vnc', then if the value 'password' selects the vnc
+# change password command. Otherwise, this specifies a new server URI
+# address to listen to for VNC connections.
+#
+# @arg: If @device is a block device, then this is an optional format to open
+# the device with.
+# If @device is 'vnc' and @target is 'password', this is the new VNC
+# password to set. If this argument is an empty string, then no future
+# logins will be allowed.
+#
+# Returns: Nothing on success.
+# If @device is not a valid block device, DeviceNotFound
+# If @format is not a valid block format, InvalidBlockFormat
+# If the new block device is encrypted, DeviceEncrypted. Note that
+# if this error is returned, the device has been opened successfully
+# and an additional call to @block_passwd is required to set the
+# device's password. The behavior of reads and writes to the block
+# device between when these calls are executed is undefined.
+#
+# Notes: It is strongly recommended that this interface is not used especially
+# for changing block devices.
+#
+# Since: 0.14.0
+##
+{ 'command': 'change',
+ 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 886d589..bfae81f 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -110,10 +110,7 @@ EQMP
{
.name = "change",
.args_type = "device:B,target:F,arg:s?",
- .params = "device filename [format]",
- .help = "change a removable medium, optional format",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_change,
+ .mhandler.cmd_new = qmp_marshal_input_change,
},
SQMP
diff --git a/qmp.c b/qmp.c
index 9c9ea62..1222b6c 100644
--- a/qmp.c
+++ b/qmp.c
@@ -23,6 +23,7 @@
#include "hw/qdev.h"
#include "qapi/qmp-input-visitor.h"
#include "qapi/qmp-output-visitor.h"
+#include "blockdev.h"
NameInfo *qmp_query_name(Error **errp)
{
@@ -345,9 +346,52 @@ void qmp_expire_password(const char *protocol, const char *whenstr,
error_set(errp, QERR_INVALID_PARAMETER, "protocol");
}
+#ifdef CONFIG_VNC
void qmp_change_vnc_password(const char *password, Error **errp)
{
if (vnc_display_password(NULL, password) < 0) {
error_set(errp, QERR_SET_PASSWD_FAILED);
}
}
+
+static void qmp_change_vnc_listen(const char *target, Error **err)
+{
+ if (vnc_display_open(NULL, target) < 0) {
+ error_set(err, QERR_VNC_SERVER_FAILED, target);
+ }
+}
+
+static void qmp_change_vnc(const char *target, bool has_arg, const char *arg,
+ Error **errp)
+{
+ if (strcmp(target, "passwd") == 0 || strcmp(target, "password") == 0) {
+ if (!has_arg) {
+ error_set(errp, QERR_MISSING_PARAMETER, "password");
+ } else {
+ qmp_change_vnc_password(arg, errp);
+ }
+ } else {
+ qmp_change_vnc_listen(target, errp);
+ }
+}
+#else
+void qmp_change_vnc_password(const char *password, Error **errp)
+{
+ error_set(errp, QERR_FEATURE_DISABLED, "vnc");
+}
+static void qmp_change_vnc(const char *target, bool has_arg, const char *arg,
+ Error **errp)
+{
+ error_set(errp, QERR_FEATURE_DISABLED, "vnc");
+}
+#endif /* !CONFIG_VNC */
+
+void qmp_change(const char *device, const char *target,
+ bool has_arg, const char *arg, Error **err)
+{
+ if (strcmp(device, "vnc") == 0) {
+ qmp_change_vnc(target, has_arg, arg, err);
+ } else {
+ qmp_change_blockdev(device, target, has_arg, arg, err);
+ }
+}
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 10/14] qapi: Convert block_set_io_throttle
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (8 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 09/14] qapi: Convert change Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 11/14] qmp: Add missing gcc format attribute and fix format string Luiz Capitulino
` (4 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
blockdev.c | 47 ++++++++++++++---------------------------------
blockdev.h | 2 --
hmp-commands.hx | 3 +--
hmp.c | 14 ++++++++++++++
hmp.h | 1 +
qapi-schema.json | 29 +++++++++++++++++++++++++++++
qmp-commands.hx | 5 +----
7 files changed, 60 insertions(+), 41 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 8df78ce..5d16137 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -775,46 +775,29 @@ void qmp_change_blockdev(const char *device, const char *filename,
}
/* throttling disk I/O limits */
-int do_block_set_io_throttle(Monitor *mon,
- const QDict *qdict, QObject **ret_data)
+void qmp_block_set_io_throttle(const char *device, int64_t bps, int64_t bps_rd,
+ int64_t bps_wr, int64_t iops, int64_t iops_rd,
+ int64_t iops_wr, Error **errp)
{
BlockIOLimit io_limits;
- const char *devname = qdict_get_str(qdict, "device");
BlockDriverState *bs;
- io_limits.bps[BLOCK_IO_LIMIT_TOTAL]
- = qdict_get_try_int(qdict, "bps", -1);
- io_limits.bps[BLOCK_IO_LIMIT_READ]
- = qdict_get_try_int(qdict, "bps_rd", -1);
- io_limits.bps[BLOCK_IO_LIMIT_WRITE]
- = qdict_get_try_int(qdict, "bps_wr", -1);
- io_limits.iops[BLOCK_IO_LIMIT_TOTAL]
- = qdict_get_try_int(qdict, "iops", -1);
- io_limits.iops[BLOCK_IO_LIMIT_READ]
- = qdict_get_try_int(qdict, "iops_rd", -1);
- io_limits.iops[BLOCK_IO_LIMIT_WRITE]
- = qdict_get_try_int(qdict, "iops_wr", -1);
-
- bs = bdrv_find(devname);
+ bs = bdrv_find(device);
if (!bs) {
- qerror_report(QERR_DEVICE_NOT_FOUND, devname);
- return -1;
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+ return;
}
- if ((io_limits.bps[BLOCK_IO_LIMIT_TOTAL] == -1)
- || (io_limits.bps[BLOCK_IO_LIMIT_READ] == -1)
- || (io_limits.bps[BLOCK_IO_LIMIT_WRITE] == -1)
- || (io_limits.iops[BLOCK_IO_LIMIT_TOTAL] == -1)
- || (io_limits.iops[BLOCK_IO_LIMIT_READ] == -1)
- || (io_limits.iops[BLOCK_IO_LIMIT_WRITE] == -1)) {
- qerror_report(QERR_MISSING_PARAMETER,
- "bps/bps_rd/bps_wr/iops/iops_rd/iops_wr");
- return -1;
- }
+ io_limits.bps[BLOCK_IO_LIMIT_TOTAL] = bps;
+ io_limits.bps[BLOCK_IO_LIMIT_READ] = bps_rd;
+ io_limits.bps[BLOCK_IO_LIMIT_WRITE] = bps_wr;
+ io_limits.iops[BLOCK_IO_LIMIT_TOTAL]= iops;
+ io_limits.iops[BLOCK_IO_LIMIT_READ] = iops_rd;
+ io_limits.iops[BLOCK_IO_LIMIT_WRITE]= iops_wr;
if (!do_check_io_limits(&io_limits)) {
- qerror_report(QERR_INVALID_PARAMETER_COMBINATION);
- return -1;
+ error_set(errp, QERR_INVALID_PARAMETER_COMBINATION);
+ return;
}
bs->io_limits = io_limits;
@@ -829,8 +812,6 @@ int do_block_set_io_throttle(Monitor *mon,
qemu_mod_timer(bs->block_timer, qemu_get_clock_ns(vm_clock));
}
}
-
- return 0;
}
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
diff --git a/blockdev.h b/blockdev.h
index b077449..260e16b 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -62,6 +62,4 @@ void qmp_change_blockdev(const char *device, const char *filename,
bool has_format, const char *format, Error **errp);
void do_commit(Monitor *mon, const QDict *qdict);
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
-int do_block_set_io_throttle(Monitor *mon,
- const QDict *qdict, QObject **ret_data);
#endif
diff --git a/hmp-commands.hx b/hmp-commands.hx
index ac27ab3..e6506fc 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1202,8 +1202,7 @@ ETEXI
.args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
.params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
.help = "change I/O throttle limits for a block drive",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_block_set_io_throttle,
+ .mhandler.cmd = hmp_block_set_io_throttle,
},
STEXI
diff --git a/hmp.c b/hmp.c
index 2b948aa..4664dbe 100644
--- a/hmp.c
+++ b/hmp.c
@@ -769,3 +769,17 @@ void hmp_change(Monitor *mon, const QDict *qdict)
}
hmp_handle_error(mon, &err);
}
+
+void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
+{
+ Error *err = NULL;
+
+ qmp_block_set_io_throttle(qdict_get_str(qdict, "device"),
+ qdict_get_int(qdict, "bps"),
+ qdict_get_int(qdict, "bps_rd"),
+ qdict_get_int(qdict, "bps_wr"),
+ qdict_get_int(qdict, "iops"),
+ qdict_get_int(qdict, "iops_rd"),
+ qdict_get_int(qdict, "iops_wr"), &err);
+ hmp_handle_error(mon, &err);
+}
diff --git a/hmp.h b/hmp.h
index 621bdc2..aab0b1f 100644
--- a/hmp.h
+++ b/hmp.h
@@ -53,5 +53,6 @@ void hmp_set_password(Monitor *mon, const QDict *qdict);
void hmp_expire_password(Monitor *mon, const QDict *qdict);
void hmp_eject(Monitor *mon, const QDict *qdict);
void hmp_change(Monitor *mon, const QDict *qdict);
+void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict);
#endif
diff --git a/qapi-schema.json b/qapi-schema.json
index eb20dac..9b154cc 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1402,3 +1402,32 @@
##
{ 'command': 'change',
'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
+
+##
+# @block_set_io_throttle:
+#
+# Change I/O throttle limits for a block drive.
+#
+# @device: The name of the device
+#
+# @bps: total throughput limit in bytes per second
+#
+# @bps_rd: read throughput limit in bytes per second
+#
+# @bps_wr: write throughput limit in bytes per second
+#
+# @iops: total I/O operations per second
+#
+# @ops_rd: read I/O operations per second
+#
+# @iops_wr: write I/O operations per second
+#
+# Returns: Nothing on success
+# If @device is not a valid block device, DeviceNotFound
+# If the argument combination is invalid, InvalidParameterCombination
+#
+# Since: 1.1
+##
+{ 'command': 'block_set_io_throttle',
+ 'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
+ 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int' } }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index bfae81f..799e655 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -807,10 +807,7 @@ EQMP
{
.name = "block_set_io_throttle",
.args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
- .params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
- .help = "change I/O throttle limits for a block drive",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_block_set_io_throttle,
+ .mhandler.cmd_new = qmp_marshal_input_block_set_io_throttle,
},
SQMP
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 11/14] qmp: Add missing gcc format attribute and fix format string
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (9 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 10/14] qapi: Convert block_set_io_throttle Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 12/14] qerror: add check-qerror.sh to verify alphabetical order Luiz Capitulino
` (3 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: Stefan Weil, aliguori
From: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
test-qmp-input-visitor.c | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/test-qmp-input-visitor.c b/test-qmp-input-visitor.c
index 1f3ab03..926db5c 100644
--- a/test-qmp-input-visitor.c
+++ b/test-qmp-input-visitor.c
@@ -38,8 +38,9 @@ static void visitor_input_teardown(TestInputVisitorData *data,
/* This is provided instead of a test setup function so that the JSON
string used by the tests are kept in the test functions (and not
int main()) */
-static Visitor *visitor_input_test_init(TestInputVisitorData *data,
- const char *json_string, ...)
+static GCC_FMT_ATTR(2, 3)
+Visitor *visitor_input_test_init(TestInputVisitorData *data,
+ const char *json_string, ...)
{
Visitor *v;
va_list ap;
@@ -66,7 +67,7 @@ static void test_visitor_in_int(TestInputVisitorData *data,
Error *errp = NULL;
Visitor *v;
- v = visitor_input_test_init(data, "%d", value);
+ v = visitor_input_test_init(data, "%" PRId64, value);
visit_type_int(v, &res, NULL, &errp);
g_assert(!error_is_set(&errp));
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 12/14] qerror: add check-qerror.sh to verify alphabetical order
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (10 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 11/14] qmp: Add missing gcc format attribute and fix format string Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 13/14] qerror: restore alphabetical order over qerrors Luiz Capitulino
` (2 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori, Stefan Hajnoczi
From: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We're supposed to keep qerror definitions and table entries in
alphabetical order. In practice this is not checked.
I haven't found a nice way to integrate this into the makefile yet but
we can at least have this script which verifies that qerrors are in
alphabetical order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
qerror.c | 3 +--
qerror.h | 2 +-
scripts/check-qerror.sh | 22 ++++++++++++++++++++++
3 files changed, 24 insertions(+), 3 deletions(-)
create mode 100755 scripts/check-qerror.sh
diff --git a/qerror.c b/qerror.c
index 9a75d06..62c0c70 100644
--- a/qerror.c
+++ b/qerror.c
@@ -40,8 +40,7 @@ static const QType qerror_type = {
* "running out of foo: %(foo)%%"
*
* Please keep the entries in alphabetical order.
- * Use "sed -n '/^static.*qerror_table\[\]/,/^};/s/QERR_/&/gp' qerror.c | sort -c"
- * to check.
+ * Use scripts/check-qerror.sh to check.
*/
static const QErrorStringTable qerror_table[] = {
{
diff --git a/qerror.h b/qerror.h
index 27800fe..40e52e8 100644
--- a/qerror.h
+++ b/qerror.h
@@ -49,7 +49,7 @@ QError *qobject_to_qerror(const QObject *obj);
/*
* QError class list
* Please keep the definitions in alphabetical order.
- * Use "grep '^#define QERR_' qerror.h | sort -c" to check.
+ * Use scripts/check-qerror.sh to check.
*/
#define QERR_BAD_BUS_FOR_DEVICE \
"{ 'class': 'BadBusForDevice', 'data': { 'device': %s, 'bad_bus_type': %s } }"
diff --git a/scripts/check-qerror.sh b/scripts/check-qerror.sh
new file mode 100755
index 0000000..af7fbd5
--- /dev/null
+++ b/scripts/check-qerror.sh
@@ -0,0 +1,22 @@
+#!/bin/sh
+# This script verifies that qerror definitions and table entries are
+# alphabetically ordered.
+
+check_order() {
+ errmsg=$1
+ shift
+
+ # sort -C verifies order but does not print a message. sort -c does print a
+ # message. These options are both in POSIX.
+ if ! "$@" | sort -C; then
+ echo "$errmsg"
+ "$@" | sort -c
+ exit 1
+ fi
+ return 0
+}
+
+check_order 'Definitions in qerror.h must be in alphabetical order:' \
+ grep '^#define QERR_' qerror.h
+check_order 'Entries in qerror.c:qerror_table must be in alphabetical order:' \
+ sed -n '/^static.*qerror_table\[\]/,/^};/s/QERR_/&/gp' qerror.c
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 13/14] qerror: restore alphabetical order over qerrors
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (11 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 12/14] qerror: add check-qerror.sh to verify alphabetical order Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-18 17:41 ` [Qemu-devel] [PATCH 14/14] block: use proper qerrors in qmp_block_resize Luiz Capitulino
2012-01-19 18:47 ` [Qemu-devel] [PULL 00/14]: QMP queue Anthony Liguori
14 siblings, 0 replies; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori, Stefan Hajnoczi
From: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Over time these must have gotten out of order. Put everything back in
alphabetical order.
This is purely a clean up. In practice nothing depends on the order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
qerror.c | 84 +++++++++++++++++++++++++++++++-------------------------------
qerror.h | 72 ++++++++++++++++++++++++++--------------------------
2 files changed, 78 insertions(+), 78 deletions(-)
diff --git a/qerror.c b/qerror.c
index 62c0c70..2979b3e 100644
--- a/qerror.c
+++ b/qerror.c
@@ -44,6 +44,10 @@ static const QType qerror_type = {
*/
static const QErrorStringTable qerror_table[] = {
{
+ .error_fmt = QERR_ADD_CLIENT_FAILED,
+ .desc = "Could not add client",
+ },
+ {
.error_fmt = QERR_BAD_BUS_FOR_DEVICE,
.desc = "Device '%(device)' can't go on a %(bad_bus_type) bus",
},
@@ -52,26 +56,30 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Block format '%(format)' used by device '%(name)' does not support feature '%(feature)'",
},
{
- .error_fmt = QERR_BUS_NOT_FOUND,
- .desc = "Bus '%(bus)' not found",
- },
- {
.error_fmt = QERR_BUS_NO_HOTPLUG,
.desc = "Bus '%(bus)' does not support hotplugging",
},
{
- .error_fmt = QERR_COMMAND_NOT_FOUND,
- .desc = "The command %(name) has not been found",
+ .error_fmt = QERR_BUS_NOT_FOUND,
+ .desc = "Bus '%(bus)' not found",
},
{
.error_fmt = QERR_COMMAND_DISABLED,
.desc = "The command %(name) has been disabled for this instance",
},
{
+ .error_fmt = QERR_COMMAND_NOT_FOUND,
+ .desc = "The command %(name) has not been found",
+ },
+ {
.error_fmt = QERR_DEVICE_ENCRYPTED,
.desc = "Device '%(device)' is encrypted",
},
{
+ .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
+ .desc = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
+ },
+ {
.error_fmt = QERR_DEVICE_INIT_FAILED,
.desc = "Device '%(device)' could not be initialized",
},
@@ -80,10 +88,6 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Device '%(device)' is in use",
},
{
- .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
- .desc = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
- },
- {
.error_fmt = QERR_DEVICE_LOCKED,
.desc = "Device '%(device)' is locked",
},
@@ -92,6 +96,14 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Device '%(device)' has multiple child busses",
},
{
+ .error_fmt = QERR_DEVICE_NO_BUS,
+ .desc = "Device '%(device)' has no child bus",
+ },
+ {
+ .error_fmt = QERR_DEVICE_NO_HOTPLUG,
+ .desc = "Device '%(device)' does not support hotplugging",
+ },
+ {
.error_fmt = QERR_DEVICE_NOT_ACTIVE,
.desc = "Device '%(device)' has not been activated",
},
@@ -108,14 +120,6 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Device '%(device)' is not removable",
},
{
- .error_fmt = QERR_DEVICE_NO_BUS,
- .desc = "Device '%(device)' has no child bus",
- },
- {
- .error_fmt = QERR_DEVICE_NO_HOTPLUG,
- .desc = "Device '%(device)' does not support hotplugging",
- },
- {
.error_fmt = QERR_DUPLICATE_ID,
.desc = "Duplicate ID '%(id)' for %(object)",
},
@@ -140,6 +144,10 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Invalid parameter '%(name)'",
},
{
+ .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
+ .desc = "Invalid parameter combination",
+ },
+ {
.error_fmt = QERR_INVALID_PARAMETER_TYPE,
.desc = "Invalid parameter type, expected: %(expected)",
},
@@ -156,15 +164,15 @@ static const QErrorStringTable qerror_table[] = {
.desc = "An IO error has occurred",
},
{
- .error_fmt = QERR_JSON_PARSING,
- .desc = "Invalid JSON syntax",
- },
- {
.error_fmt = QERR_JSON_PARSE_ERROR,
.desc = "JSON parse error, %(message)",
},
{
+ .error_fmt = QERR_JSON_PARSING,
+ .desc = "Invalid JSON syntax",
+ },
+ {
.error_fmt = QERR_KVM_MISSING_CAP,
.desc = "Using KVM without %(capability), %(feature) unavailable",
},
@@ -210,6 +218,14 @@ static const QErrorStringTable qerror_table[] = {
"value %(value) (minimum: %(min), maximum: %(max)'",
},
{
+ .error_fmt = QERR_QGA_COMMAND_FAILED,
+ .desc = "Guest agent command failed, error was '%(message)'",
+ },
+ {
+ .error_fmt = QERR_QGA_LOGGING_FAILED,
+ .desc = "Guest agent failed to log non-optional log statement",
+ },
+ {
.error_fmt = QERR_QMP_BAD_INPUT_OBJECT,
.desc = "Expected '%(expected)' in QMP input",
},
@@ -230,10 +246,6 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Could not set password",
},
{
- .error_fmt = QERR_ADD_CLIENT_FAILED,
- .desc = "Could not add client",
- },
- {
.error_fmt = QERR_TOO_MANY_FILES,
.desc = "Too many open files",
},
@@ -242,15 +254,15 @@ static const QErrorStringTable qerror_table[] = {
.desc = "An undefined error has occurred",
},
{
- .error_fmt = QERR_UNSUPPORTED,
- .desc = "this feature or command is not currently supported",
- },
- {
.error_fmt = QERR_UNKNOWN_BLOCK_FORMAT_FEATURE,
.desc = "'%(device)' uses a %(format) feature which is not "
"supported by this qemu version: %(feature)",
},
{
+ .error_fmt = QERR_UNSUPPORTED,
+ .desc = "this feature or command is not currently supported",
+ },
+ {
.error_fmt = QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION,
.desc = "Migration is disabled when VirtFS export path '%(path)' "
"is mounted in the guest using mount_tag '%(tag)'",
@@ -259,18 +271,6 @@ static const QErrorStringTable qerror_table[] = {
.error_fmt = QERR_VNC_SERVER_FAILED,
.desc = "Could not start VNC server on %(target)",
},
- {
- .error_fmt = QERR_QGA_LOGGING_FAILED,
- .desc = "Guest agent failed to log non-optional log statement",
- },
- {
- .error_fmt = QERR_QGA_COMMAND_FAILED,
- .desc = "Guest agent command failed, error was '%(message)'",
- },
- {
- .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
- .desc = "Invalid parameter combination",
- },
{}
};
diff --git a/qerror.h b/qerror.h
index 40e52e8..be4e865 100644
--- a/qerror.h
+++ b/qerror.h
@@ -51,42 +51,54 @@ QError *qobject_to_qerror(const QObject *obj);
* Please keep the definitions in alphabetical order.
* Use scripts/check-qerror.sh to check.
*/
+#define QERR_ADD_CLIENT_FAILED \
+ "{ 'class': 'AddClientFailed', 'data': {} }"
+
#define QERR_BAD_BUS_FOR_DEVICE \
"{ 'class': 'BadBusForDevice', 'data': { 'device': %s, 'bad_bus_type': %s } }"
#define QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED \
"{ 'class': 'BlockFormatFeatureNotSupported', 'data': { 'format': %s, 'name': %s, 'feature': %s } }"
-#define QERR_BUS_NOT_FOUND \
- "{ 'class': 'BusNotFound', 'data': { 'bus': %s } }"
+#define QERR_BUFFER_OVERRUN \
+ "{ 'class': 'BufferOverrun', 'data': {} }"
#define QERR_BUS_NO_HOTPLUG \
"{ 'class': 'BusNoHotplug', 'data': { 'bus': %s } }"
-#define QERR_COMMAND_NOT_FOUND \
- "{ 'class': 'CommandNotFound', 'data': { 'name': %s } }"
+#define QERR_BUS_NOT_FOUND \
+ "{ 'class': 'BusNotFound', 'data': { 'bus': %s } }"
#define QERR_COMMAND_DISABLED \
"{ 'class': 'CommandDisabled', 'data': { 'name': %s } }"
+#define QERR_COMMAND_NOT_FOUND \
+ "{ 'class': 'CommandNotFound', 'data': { 'name': %s } }"
+
#define QERR_DEVICE_ENCRYPTED \
"{ 'class': 'DeviceEncrypted', 'data': { 'device': %s, 'filename': %s } }"
+#define QERR_DEVICE_FEATURE_BLOCKS_MIGRATION \
+ "{ 'class': 'DeviceFeatureBlocksMigration', 'data': { 'device': %s, 'feature': %s } }"
+
#define QERR_DEVICE_INIT_FAILED \
"{ 'class': 'DeviceInitFailed', 'data': { 'device': %s } }"
#define QERR_DEVICE_IN_USE \
"{ 'class': 'DeviceInUse', 'data': { 'device': %s } }"
-#define QERR_DEVICE_FEATURE_BLOCKS_MIGRATION \
- "{ 'class': 'DeviceFeatureBlocksMigration', 'data': { 'device': %s, 'feature': %s } }"
-
#define QERR_DEVICE_LOCKED \
"{ 'class': 'DeviceLocked', 'data': { 'device': %s } }"
#define QERR_DEVICE_MULTIPLE_BUSSES \
"{ 'class': 'DeviceMultipleBusses', 'data': { 'device': %s } }"
+#define QERR_DEVICE_NO_BUS \
+ "{ 'class': 'DeviceNoBus', 'data': { 'device': %s } }"
+
+#define QERR_DEVICE_NO_HOTPLUG \
+ "{ 'class': 'DeviceNoHotplug', 'data': { 'device': %s } }"
+
#define QERR_DEVICE_NOT_ACTIVE \
"{ 'class': 'DeviceNotActive', 'data': { 'device': %s } }"
@@ -99,12 +111,6 @@ QError *qobject_to_qerror(const QObject *obj);
#define QERR_DEVICE_NOT_REMOVABLE \
"{ 'class': 'DeviceNotRemovable', 'data': { 'device': %s } }"
-#define QERR_DEVICE_NO_BUS \
- "{ 'class': 'DeviceNoBus', 'data': { 'device': %s } }"
-
-#define QERR_DEVICE_NO_HOTPLUG \
- "{ 'class': 'DeviceNoHotplug', 'data': { 'device': %s } }"
-
#define QERR_DUPLICATE_ID \
"{ 'class': 'DuplicateId', 'data': { 'id': %s, 'object': %s } }"
@@ -114,12 +120,18 @@ QError *qobject_to_qerror(const QObject *obj);
#define QERR_FD_NOT_SUPPLIED \
"{ 'class': 'FdNotSupplied', 'data': {} }"
+#define QERR_FEATURE_DISABLED \
+ "{ 'class': 'FeatureDisabled', 'data': { 'name': %s } }"
+
#define QERR_INVALID_BLOCK_FORMAT \
"{ 'class': 'InvalidBlockFormat', 'data': { 'name': %s } }"
#define QERR_INVALID_PARAMETER \
"{ 'class': 'InvalidParameter', 'data': { 'name': %s } }"
+#define QERR_INVALID_PARAMETER_COMBINATION \
+ "{ 'class': 'InvalidParameterCombination', 'data': {} }"
+
#define QERR_INVALID_PARAMETER_TYPE \
"{ 'class': 'InvalidParameterType', 'data': { 'name': %s,'expected': %s } }"
@@ -132,14 +144,11 @@ QError *qobject_to_qerror(const QObject *obj);
#define QERR_IO_ERROR \
"{ 'class': 'IOError', 'data': {} }"
-#define QERR_JSON_PARSING \
- "{ 'class': 'JSONParsing', 'data': {} }"
-
#define QERR_JSON_PARSE_ERROR \
"{ 'class': 'JSONParseError', 'data': { 'message': %s } }"
-#define QERR_BUFFER_OVERRUN \
- "{ 'class': 'BufferOverrun', 'data': {} }"
+#define QERR_JSON_PARSING \
+ "{ 'class': 'JSONParsing', 'data': {} }"
#define QERR_KVM_MISSING_CAP \
"{ 'class': 'KVMMissingCap', 'data': { 'capability': %s, 'feature': %s } }"
@@ -174,6 +183,12 @@ QError *qobject_to_qerror(const QObject *obj);
#define QERR_PROPERTY_VALUE_OUT_OF_RANGE \
"{ 'class': 'PropertyValueOutOfRange', 'data': { 'device': %s, 'property': %s, 'value': %"PRId64", 'min': %"PRId64", 'max': %"PRId64" } }"
+#define QERR_QGA_COMMAND_FAILED \
+ "{ 'class': 'QgaCommandFailed', 'data': { 'message': %s } }"
+
+#define QERR_QGA_LOGGING_FAILED \
+ "{ 'class': 'QgaLoggingFailed', 'data': {} }"
+
#define QERR_QMP_BAD_INPUT_OBJECT \
"{ 'class': 'QMPBadInputObject', 'data': { 'expected': %s } }"
@@ -189,37 +204,22 @@ QError *qobject_to_qerror(const QObject *obj);
#define QERR_SET_PASSWD_FAILED \
"{ 'class': 'SetPasswdFailed', 'data': {} }"
-#define QERR_ADD_CLIENT_FAILED \
- "{ 'class': 'AddClientFailed', 'data': {} }"
-
#define QERR_TOO_MANY_FILES \
"{ 'class': 'TooManyFiles', 'data': {} }"
#define QERR_UNDEFINED_ERROR \
"{ 'class': 'UndefinedError', 'data': {} }"
-#define QERR_UNSUPPORTED \
- "{ 'class': 'Unsupported', 'data': {} }"
-
#define QERR_UNKNOWN_BLOCK_FORMAT_FEATURE \
"{ 'class': 'UnknownBlockFormatFeature', 'data': { 'device': %s, 'format': %s, 'feature': %s } }"
+#define QERR_UNSUPPORTED \
+ "{ 'class': 'Unsupported', 'data': {} }"
+
#define QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION \
"{ 'class': 'VirtFSFeatureBlocksMigration', 'data': { 'path': %s, 'tag': %s } }"
#define QERR_VNC_SERVER_FAILED \
"{ 'class': 'VNCServerFailed', 'data': { 'target': %s } }"
-#define QERR_FEATURE_DISABLED \
- "{ 'class': 'FeatureDisabled', 'data': { 'name': %s } }"
-
-#define QERR_QGA_LOGGING_FAILED \
- "{ 'class': 'QgaLoggingFailed', 'data': {} }"
-
-#define QERR_QGA_COMMAND_FAILED \
- "{ 'class': 'QgaCommandFailed', 'data': { 'message': %s } }"
-
-#define QERR_INVALID_PARAMETER_COMBINATION \
- "{ 'class': 'InvalidParameterCombination', 'data': {} }"
-
#endif /* QERROR_H */
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PATCH 14/14] block: use proper qerrors in qmp_block_resize
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (12 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 13/14] qerror: restore alphabetical order over qerrors Luiz Capitulino
@ 2012-01-18 17:41 ` Luiz Capitulino
2012-01-24 9:35 ` Markus Armbruster
2012-01-19 18:47 ` [Qemu-devel] [PULL 00/14]: QMP queue Anthony Liguori
14 siblings, 1 reply; 17+ messages in thread
From: Luiz Capitulino @ 2012-01-18 17:41 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori, Stefan Hajnoczi
From: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Let's report specific errors so that management tools and users can
identify the problem.
Two new qerrors are needed:
* QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM
* QERR_DEVICE_IS_READ_ONLY for EACCES
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
blockdev.c | 26 ++++++++++++++++++--------
qapi-schema.json | 7 +++++--
qerror.c | 8 ++++++++
qerror.h | 6 ++++++
4 files changed, 37 insertions(+), 10 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 5d16137..1f83c88 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -848,11 +848,6 @@ int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
return 0;
}
-/*
- * XXX: replace the QERR_UNDEFINED_ERROR errors with real values once the
- * existing QERR_ macro mess is cleaned up. A good example for better
- * error reports can be found in the qemu-img resize code.
- */
void qmp_block_resize(const char *device, int64_t size, Error **errp)
{
BlockDriverState *bs;
@@ -864,12 +859,27 @@ void qmp_block_resize(const char *device, int64_t size, Error **errp)
}
if (size < 0) {
- error_set(errp, QERR_UNDEFINED_ERROR);
+ error_set(errp, QERR_INVALID_PARAMETER_VALUE, "size", "a >0 size");
return;
}
- if (bdrv_truncate(bs, size)) {
+ switch (bdrv_truncate(bs, size)) {
+ case 0:
+ break;
+ case -ENOMEDIUM:
+ error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
+ break;
+ case -ENOTSUP:
+ error_set(errp, QERR_UNSUPPORTED);
+ break;
+ case -EACCES:
+ error_set(errp, QERR_DEVICE_IS_READ_ONLY, device);
+ break;
+ case -EBUSY:
+ error_set(errp, QERR_DEVICE_IN_USE, device);
+ break;
+ default:
error_set(errp, QERR_UNDEFINED_ERROR);
- return;
+ break;
}
}
diff --git a/qapi-schema.json b/qapi-schema.json
index 9b154cc..735eb35 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1064,8 +1064,11 @@
#
# Returns: nothing on success
# If @device is not a valid block device, DeviceNotFound
-#
-# Notes: This command returns UndefinedError in a number of error conditions.
+# If @size is negative, InvalidParameterValue
+# If the block device has no medium inserted, DeviceHasNoMedium
+# If the block device does not support resize, Unsupported
+# If the block device is read-only, DeviceIsReadOnly
+# If a long-running operation is using the device, DeviceInUse
#
# Since: 0.14.0
##
diff --git a/qerror.c b/qerror.c
index 2979b3e..3d95383 100644
--- a/qerror.c
+++ b/qerror.c
@@ -80,6 +80,10 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
},
{
+ .error_fmt = QERR_DEVICE_HAS_NO_MEDIUM,
+ .desc = "Device '%(device)' has no medium",
+ },
+ {
.error_fmt = QERR_DEVICE_INIT_FAILED,
.desc = "Device '%(device)' could not be initialized",
},
@@ -88,6 +92,10 @@ static const QErrorStringTable qerror_table[] = {
.desc = "Device '%(device)' is in use",
},
{
+ .error_fmt = QERR_DEVICE_IS_READ_ONLY,
+ .desc = "Device '%(device)' is read only",
+ },
+ {
.error_fmt = QERR_DEVICE_LOCKED,
.desc = "Device '%(device)' is locked",
},
diff --git a/qerror.h b/qerror.h
index be4e865..89160dd 100644
--- a/qerror.h
+++ b/qerror.h
@@ -81,12 +81,18 @@ QError *qobject_to_qerror(const QObject *obj);
#define QERR_DEVICE_FEATURE_BLOCKS_MIGRATION \
"{ 'class': 'DeviceFeatureBlocksMigration', 'data': { 'device': %s, 'feature': %s } }"
+#define QERR_DEVICE_HAS_NO_MEDIUM \
+ "{ 'class': 'DeviceHasNoMedium', 'data': { 'device': %s } }"
+
#define QERR_DEVICE_INIT_FAILED \
"{ 'class': 'DeviceInitFailed', 'data': { 'device': %s } }"
#define QERR_DEVICE_IN_USE \
"{ 'class': 'DeviceInUse', 'data': { 'device': %s } }"
+#define QERR_DEVICE_IS_READ_ONLY \
+ "{ 'class': 'DeviceIsReadOnly', 'data': { 'device': %s } }"
+
#define QERR_DEVICE_LOCKED \
"{ 'class': 'DeviceLocked', 'data': { 'device': %s } }"
--
1.7.9.rc0.dirty
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PATCH 14/14] block: use proper qerrors in qmp_block_resize
2012-01-18 17:41 ` [Qemu-devel] [PATCH 14/14] block: use proper qerrors in qmp_block_resize Luiz Capitulino
@ 2012-01-24 9:35 ` Markus Armbruster
0 siblings, 0 replies; 17+ messages in thread
From: Markus Armbruster @ 2012-01-24 9:35 UTC (permalink / raw)
To: Luiz Capitulino; +Cc: aliguori, qemu-devel, Stefan Hajnoczi
A bit late, but here goes anyway:
Luiz Capitulino <lcapitulino@redhat.com> writes:
> From: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
>
> Let's report specific errors so that management tools and users can
> identify the problem.
>
> Two new qerrors are needed:
> * QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM
> * QERR_DEVICE_IS_READ_ONLY for EACCES
[...]
> diff --git a/blockdev.c b/blockdev.c
> index 5d16137..1f83c88 100644
> --- a/blockdev.c
> +++ b/blockdev.c
[...]
> @@ -864,12 +859,27 @@ void qmp_block_resize(const char *device, int64_t size, Error **errp)
> }
>
> if (size < 0) {
> - error_set(errp, QERR_UNDEFINED_ERROR);
> + error_set(errp, QERR_INVALID_PARAMETER_VALUE, "size", "a >0 size");
> return;
> }
>
> - if (bdrv_truncate(bs, size)) {
> + switch (bdrv_truncate(bs, size)) {
> + case 0:
> + break;
> + case -ENOMEDIUM:
> + error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
> + break;
> + case -ENOTSUP:
> + error_set(errp, QERR_UNSUPPORTED);
> + break;
> + case -EACCES:
> + error_set(errp, QERR_DEVICE_IS_READ_ONLY, device);
> + break;
Are you sure "read only" is (and will remain) the only possible reason
for EACCES here? I mean bdrv_truncate() obviously uses it for that, but
what about all the driver methods?
Aside: bdrv_truncate()'s use of EACCES is a somewhat unusual. System
calls generally use EBADF when refusing to change a read-only file.
Outside this patch's scope.
> + case -EBUSY:
> + error_set(errp, QERR_DEVICE_IN_USE, device);
> + break;
> + default:
> error_set(errp, QERR_UNDEFINED_ERROR);
> - return;
> + break;
> }
> }
[...]
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Qemu-devel] [PULL 00/14]: QMP queue
2012-01-18 17:41 [Qemu-devel] [PULL 00/14]: QMP queue Luiz Capitulino
` (13 preceding siblings ...)
2012-01-18 17:41 ` [Qemu-devel] [PATCH 14/14] block: use proper qerrors in qmp_block_resize Luiz Capitulino
@ 2012-01-19 18:47 ` Anthony Liguori
14 siblings, 0 replies; 17+ messages in thread
From: Anthony Liguori @ 2012-01-19 18:47 UTC (permalink / raw)
To: Luiz Capitulino; +Cc: qemu-devel
On 01/18/2012 11:41 AM, Luiz Capitulino wrote:
> This pull request contains my QAPI conversions round 4, improvements to
> error reporting and a small fix.
>
> The changes (since 8c4ec5c0269bda18bb777a64b2008088d1c632dc) are available
> in the following repository:
>
> git://repo.or.cz/qemu/qmp-unstable.git queue/qmp
Pulled. Thanks.
Regards,
Anthony Liguori
> Anthony Liguori (1):
> monitor: expose readline state
>
> Luiz Capitulino (9):
> vnc: Simplify vnc_display_password()
> qapi: Convert set_password
> qapi: Convert expire_password
> block: eject_device(): Use error_set()
> qapi: Convert eject
> qapi: Introduce change-vnc-password
> qerror: Extend QERR_DEVICE_ENCRYPTED
> qapi: Convert change
> qapi: Convert block_set_io_throttle
>
> Stefan Hajnoczi (3):
> qerror: add check-qerror.sh to verify alphabetical order
> qerror: restore alphabetical order over qerrors
> block: use proper qerrors in qmp_block_resize
>
> Stefan Weil (1):
> qmp: Add missing gcc format attribute and fix format string
>
> blockdev.c | 155 ++++++++++++++++++++++------------------
> blockdev.h | 8 +--
> console.h | 3 -
> hmp-commands.hx | 15 ++---
> hmp.c | 102 ++++++++++++++++++++++++++
> hmp.h | 5 ++
> monitor.c | 179 +++-------------------------------------------
> monitor.h | 5 ++
> qapi-schema.json | 163 +++++++++++++++++++++++++++++++++++++++++-
> qerror.c | 91 +++++++++++++-----------
> qerror.h | 80 +++++++++++----------
> qmp-commands.hx | 31 +++-----
> qmp.c | 148 +++++++++++++++++++++++++++++++++++++-
> scripts/check-qerror.sh | 22 ++++++
> test-qmp-input-visitor.c | 7 +-
> ui/vnc.c | 14 +---
> 16 files changed, 657 insertions(+), 371 deletions(-)
>
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread