[Qemu-devel] [PATCH 2/4] linux-user: specify the cpu model during configure

[Qemu-devel] [PATCH 2/4] linux-user: specify the cpu model during configure

[Laurent Vivier]

This patch allows to set the default cpu model for a given architecture,
for instance:

 configure --target-list=m68k-linux-user --m68k-default-cpu=m68040

Signed-off-by: Laurent Vivier <Laurent@Vivier.EU>
---
 configure |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/configure b/configure
index c74a5f9..d54f0ed 100755
--- a/configure
+++ b/configure
@@ -527,6 +527,10 @@ for opt do
   ;;
   --target-list=*) target_list="$optarg"
   ;;
+  --*-default-cpu=*)
+    tmp=`expr "x$opt" : 'x--\(.*\)-default-cpu=.*'`
+    eval ${tmp}_default_cpu="$optarg"
+  ;;
   --enable-trace-backend=*) trace_backend="$optarg"
   ;;
   --with-trace-file=*) trace_file="$optarg"
@@ -916,6 +920,7 @@ echo "                           use %M for cpu name [$interp_prefix]"
 echo "  --target-list=LIST       set target list (default: build everything)"
 echo "Available targets: $default_target_list" | \
     fold -s -w 53 | sed -e 's/^/                           /'
+echo "  --ARCH-default-cpu=CPU   set the default cpu for a given architecture"
 echo ""
 echo "Advanced options (experts only):"
 echo "  --source-path=PATH       path of source code [$source_path]"
@@ -3291,6 +3296,10 @@ case "$target_arch2" in
     exit 1
   ;;
 esac
+tmp_target_default_cpu=`eval echo \\$${target_arch2}_default_cpu`
+if [ "x$tmp_target_default_cpu" != "x" ] ; then
+  target_default_cpu="$tmp_target_default_cpu"
+fi
 echo "TARGET_SHORT_ALIGNMENT=$target_short_alignment" >> $config_target_mak
 echo "TARGET_INT_ALIGNMENT=$target_int_alignment" >> $config_target_mak
 echo "TARGET_LONG_ALIGNMENT=$target_long_alignment" >> $config_target_mak
-- 
1.7.4.1

[Qemu-devel] [PATCH 2/4] linux-user: specify the cpu model during configure

[Laurent Vivier]

From: Laurent Vivier <Laurent@Vivier.EU>

This patch allows to set the default cpu model for a given architecture,
for instance:

 configure --target-list=m68k-linux-user --m68k-default-cpu=m68040

Signed-off-by: Laurent Vivier <Laurent@Vivier.EU>
---
 configure |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/configure b/configure
index 5e10055..5f2c073 100755
--- a/configure
+++ b/configure
@@ -536,6 +536,10 @@ for opt do
   ;;
   --target-list=*) target_list="$optarg"
   ;;
+  --*-default-cpu=*)
+    tmp=`expr "x$opt" : 'x--\(.*\)-default-cpu=.*'`
+    eval ${tmp}_default_cpu="$optarg"
+  ;;
   --enable-trace-backend=*) trace_backend="$optarg"
   ;;
   --with-trace-file=*) trace_file="$optarg"
@@ -932,6 +936,7 @@ echo "                           use %M for cpu name [$interp_prefix]"
 echo "  --target-list=LIST       set target list (default: build everything)"
 echo "Available targets: $default_target_list" | \
     fold -s -w 53 | sed -e 's/^/                           /'
+echo "  --ARCH-default-cpu=CPU   set the default cpu for a given architecture"
 echo ""
 echo "Advanced options (experts only):"
 echo "  --source-path=PATH       path of source code [$source_path]"
@@ -3369,6 +3374,10 @@ case "$target_arch2" in
     exit 1
   ;;
 esac
+tmp_target_default_cpu=`eval echo \\$${target_arch2}_default_cpu`
+if [ "x$tmp_target_default_cpu" != "x" ] ; then
+  target_default_cpu="$tmp_target_default_cpu"
+fi
 echo "TARGET_SHORT_ALIGNMENT=$target_short_alignment" >> $config_target_mak
 echo "TARGET_INT_ALIGNMENT=$target_int_alignment" >> $config_target_mak
 echo "TARGET_LONG_ALIGNMENT=$target_long_alignment" >> $config_target_mak
-- 
1.7.1

[Qemu-devel] [PATCH 0/4] linux-user: A serie of patches to set default CPU

[Laurent Vivier]

This serie of patches has already been sent, more or less, several time,
last time in july 2011.

For chrooted environment, it allows to define the default cpu model as we can't use '-cpu' argument.

For instance:

 ./configure --target-list=m68k-linux-user,arm-linux-user \
                   --m68k-default-cpu=m5206 --arm-default-cpu=sa1100
  ./m68k-linux-user/qemu-m68k -cpu ?
 >m5206
  m5208
  cfv4e
  any
 ./arm-linux-user/qemu-arm -cpu ?
Available CPUs:
  arm926
  arm946
  arm1026
  arm1136
  arm1136-r2
  arm1176
  arm11mpcore
  cortex-m3
  cortex-a8
  cortex-a9
  ti925t
  pxa250
 >sa1100
  sa1110
  pxa255
  pxa260
  pxa261
  pxa262
  pxa270
  pxa270-a0
  pxa270-a1
  pxa270-b0
  pxa270-b1
  pxa270-c0
  pxa270-c5
  any

[PATCH 1/4] linux-user: define default cpu model in configure
[PATCH 2/4] linux-user: specify the cpu model during configure
[PATCH 3/4] linux-user,m68k: display default cpu
[PATCH 4/4] linux-user,arm: display default cpu

[Qemu-devel] [PATCH 1/4] linux-user: define default cpu model in configure instead of linux-user/main.c

[Laurent Vivier]

From: Laurent Vivier <Laurent@Vivier.EU>

Signed-off-by: Laurent Vivier <Laurent@Vivier.EU>
---
 configure         |   14 ++++++++++++++
 linux-user/main.c |   34 +---------------------------------
 2 files changed, 15 insertions(+), 33 deletions(-)

diff --git a/configure b/configure
index 467e87b..c251df2 100755
--- a/configure
+++ b/configure
@@ -3313,6 +3313,7 @@ target_dir="$target"
 config_target_mak=$target_dir/config-target.mak
 target_arch2=`echo $target | cut -d '-' -f 1`
 target_bigendian="no"
+target_default_cpu="any"
 
 case "$target_arch2" in
   armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
@@ -3388,11 +3389,13 @@ TARGET_ABI_DIR=""
 case "$target_arch2" in
   i386)
     target_phys_bits=64
+    target_default_cpu="qemu32"
   ;;
   x86_64)
     TARGET_BASE_ARCH=i386
     target_phys_bits=64
     target_long_alignment=8
+    target_default_cpu="qemu64"
   ;;
   alpha)
     target_phys_bits=64
@@ -3435,12 +3438,14 @@ case "$target_arch2" in
     echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
     target_nptl="yes"
     target_phys_bits=64
+    target_default_cpu="24Kf"
   ;;
   mipsn32|mipsn32el)
     TARGET_ARCH=mipsn32
     TARGET_BASE_ARCH=mips
     echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
     target_phys_bits=64
+    target_default_cpu="20Kc"
   ;;
   mips64|mips64el)
     TARGET_ARCH=mips64
@@ -3448,12 +3453,14 @@ case "$target_arch2" in
     echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
     target_phys_bits=64
     target_long_alignment=8
+    target_default_cpu="20Kc"
   ;;
   ppc)
     gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
     target_phys_bits=64
     target_nptl="yes"
     target_libs_softmmu="$fdt_libs"
+    target_default_cpu="750"
   ;;
   ppcemb)
     TARGET_BASE_ARCH=ppc
@@ -3462,6 +3469,7 @@ case "$target_arch2" in
     target_phys_bits=64
     target_nptl="yes"
     target_libs_softmmu="$fdt_libs"
+    target_default_cpu="750"
   ;;
   ppc64)
     TARGET_BASE_ARCH=ppc
@@ -3470,6 +3478,7 @@ case "$target_arch2" in
     target_phys_bits=64
     target_long_alignment=8
     target_libs_softmmu="$fdt_libs"
+    target_default_cpu="970fx"
   ;;
   ppc64abi32)
     TARGET_ARCH=ppc64
@@ -3479,6 +3488,7 @@ case "$target_arch2" in
     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
     target_phys_bits=64
     target_libs_softmmu="$fdt_libs"
+    target_default_cpu="750"
   ;;
   sh4|sh4eb)
     TARGET_ARCH=sh4
@@ -3488,11 +3498,13 @@ case "$target_arch2" in
   ;;
   sparc)
     target_phys_bits=64
+    target_default_cpu="Fujitsu MB86904"
   ;;
   sparc64)
     TARGET_BASE_ARCH=sparc
     target_phys_bits=64
     target_long_alignment=8
+    target_default_cpu="TI UltraSparc II"
   ;;
   sparc32plus)
     TARGET_ARCH=sparc64
@@ -3500,6 +3512,7 @@ case "$target_arch2" in
     TARGET_ABI_DIR=sparc
     echo "TARGET_ABI32=y" >> $config_target_mak
     target_phys_bits=64
+    target_default_cpu="Fujitsu MB86904"
   ;;
   s390x)
     target_nptl="yes"
@@ -3522,6 +3535,7 @@ echo "TARGET_SHORT_ALIGNMENT=$target_short_alignment" >> $config_target_mak
 echo "TARGET_INT_ALIGNMENT=$target_int_alignment" >> $config_target_mak
 echo "TARGET_LONG_ALIGNMENT=$target_long_alignment" >> $config_target_mak
 echo "TARGET_LLONG_ALIGNMENT=$target_llong_alignment" >> $config_target_mak
+echo "TARGET_DEFAULT_CPU=\"$target_default_cpu\"" >> $config_target_mak
 echo "TARGET_ARCH=$TARGET_ARCH" >> $config_target_mak
 target_arch_name="`echo $TARGET_ARCH | tr '[:lower:]' '[:upper:]'`"
 echo "TARGET_$target_arch_name=y" >> $config_target_mak
diff --git a/linux-user/main.c b/linux-user/main.c
index 64d2208..25dc0eb 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -3322,39 +3322,7 @@ int main(int argc, char **argv, char **envp)
     init_paths(interp_prefix);
 
     if (cpu_model == NULL) {
-#if defined(TARGET_I386)
-#ifdef TARGET_X86_64
-        cpu_model = "qemu64";
-#else
-        cpu_model = "qemu32";
-#endif
-#elif defined(TARGET_ARM)
-        cpu_model = "any";
-#elif defined(TARGET_UNICORE32)
-        cpu_model = "any";
-#elif defined(TARGET_M68K)
-        cpu_model = "any";
-#elif defined(TARGET_SPARC)
-#ifdef TARGET_SPARC64
-        cpu_model = "TI UltraSparc II";
-#else
-        cpu_model = "Fujitsu MB86904";
-#endif
-#elif defined(TARGET_MIPS)
-#if defined(TARGET_ABI_MIPSN32) || defined(TARGET_ABI_MIPSN64)
-        cpu_model = "20Kc";
-#else
-        cpu_model = "24Kf";
-#endif
-#elif defined(TARGET_PPC)
-#ifdef TARGET_PPC64
-        cpu_model = "970fx";
-#else
-        cpu_model = "750";
-#endif
-#else
-        cpu_model = "any";
-#endif
+        cpu_model = TARGET_DEFAULT_CPU;
     }
     tcg_exec_init(0);
     cpu_exec_init_all();
-- 
1.7.5.4

[Qemu-devel] [PATCH 2/4] linux-user: specify the cpu model during configure

[Laurent Vivier]

From: Laurent Vivier <Laurent@Vivier.EU>

This patch allows to set the default cpu model for a given architecture,
for instance:

 ./configure --target-list=m68k-linux-user,arm-linux-user \
               --m68k-default-cpu=m68040 --arm-default-cpu=sa1100

Signed-off-by: Laurent Vivier <Laurent@Vivier.EU>
---
 configure |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/configure b/configure
index c251df2..98acce1 100755
--- a/configure
+++ b/configure
@@ -544,6 +544,10 @@ for opt do
   ;;
   --target-list=*) target_list="$optarg"
   ;;
+  --*-default-cpu=*)
+    tmp=`expr "x$opt" : 'x--\(.*\)-default-cpu=.*'`
+    eval ${tmp}_default_cpu="$optarg"
+  ;;
   --enable-trace-backend=*) trace_backend="$optarg"
   ;;
   --with-trace-file=*) trace_file="$optarg"
@@ -951,6 +955,7 @@ echo "                           use %M for cpu name [$interp_prefix]"
 echo "  --target-list=LIST       set target list (default: build everything)"
 echo "Available targets: $default_target_list" | \
     fold -s -w 53 | sed -e 's/^/                           /'
+echo "  --ARCH-default-cpu=CPU   set the default cpu for a given architecture"
 echo ""
 echo "Advanced options (experts only):"
 echo "  --source-path=PATH       path of source code [$source_path]"
@@ -3531,6 +3536,10 @@ case "$target_arch2" in
     exit 1
   ;;
 esac
+tmp_target_default_cpu=`eval echo \\$${target_arch2}_default_cpu`
+if [ "x$tmp_target_default_cpu" != "x" ] ; then
+  target_default_cpu="$tmp_target_default_cpu"
+fi
 echo "TARGET_SHORT_ALIGNMENT=$target_short_alignment" >> $config_target_mak
 echo "TARGET_INT_ALIGNMENT=$target_int_alignment" >> $config_target_mak
 echo "TARGET_LONG_ALIGNMENT=$target_long_alignment" >> $config_target_mak
-- 
1.7.5.4

[Qemu-devel] [PATCH 3/4] linux-user,m68k: display default cpu

[Laurent Vivier]

From: Laurent Vivier <Laurent@Vivier.EU>

Signed-off-by: Laurent Vivier <Laurent@Vivier.EU>
---
 target-m68k/helper.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/target-m68k/helper.c b/target-m68k/helper.c
index 674c8e6..ede5180 100644
--- a/target-m68k/helper.c
+++ b/target-m68k/helper.c
@@ -57,6 +57,11 @@ void m68k_cpu_list(FILE *f, fprintf_function cpu_fprintf)
     unsigned int i;
 
     for (i = 0; m68k_cpu_defs[i].name; i++) {
+        if (strcmp(m68k_cpu_defs[i].name, TARGET_DEFAULT_CPU) == 0) {
+            (*cpu_fprintf)(f, " >");
+        } else {
+            (*cpu_fprintf)(f, "  ");
+        }
         (*cpu_fprintf)(f, "%s\n", m68k_cpu_defs[i].name);
     }
 }
-- 
1.7.5.4

[Qemu-devel] [PATCH 4/4] linux-user,arm: display default cpu

[Laurent Vivier]

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 target-arm/helper.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 00458fc..7be315f 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -438,7 +438,12 @@ void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf)
 
     (*cpu_fprintf)(f, "Available CPUs:\n");
     for (i = 0; arm_cpu_names[i].name; i++) {
-        (*cpu_fprintf)(f, "  %s\n", arm_cpu_names[i].name);
+        if (strcmp(arm_cpu_names[i].name, TARGET_DEFAULT_CPU) == 0) {
+            (*cpu_fprintf)(f, " >");
+        } else {
+            (*cpu_fprintf)(f, "  ");
+        }
+        (*cpu_fprintf)(f, "%s\n", arm_cpu_names[i].name);
     }
 }
 
-- 
1.7.5.4

Re: [Qemu-devel] [PATCH 0/4] linux-user: A serie of patches to set default CPU

[Riku Voipio]

On Sun, Jan 22, 2012 at 01:27:13PM +0100, Laurent Vivier wrote:
> This serie of patches has already been sent, more or less, several time,
> last time in july 2011.
 
> For chrooted environment, it allows to define the default cpu model as we can't use '-cpu' argument.

We now can, with QEMU_CPU enviroment variable. 

Riku 

Re: [Qemu-devel] [PATCH 0/4] linux-user: A serie of patches to set default CPU

[Laurent Vivier]

Le mardi 31 janvier 2012 à 22:01 +0200, Riku Voipio a écrit :
> On Sun, Jan 22, 2012 at 01:27:13PM +0100, Laurent Vivier wrote:
> > This serie of patches has already been sent, more or less, several time,
> > last time in july 2011.
>  
> > For chrooted environment, it allows to define the default cpu model as we can't use '-cpu' argument.
> 
> We now can, with QEMU_CPU enviroment variable. 

Yes, but to define the default CPU is also interesting, it avoids to set
the variable if we know we always want to run the same CPU.

Regards,
Laurent

[Qemu-devel] [PATCH 2/4] linux-user: specify the cpu model during configure

[Laurent Vivier]

From: Laurent Vivier <Laurent@Vivier.EU>

This patch allows to set the default cpu model for a given architecture,
for instance:

 configure --target-list=m68k-linux-user --m68k-default-cpu=m68040

Signed-off-by: Laurent Vivier <Laurent@Vivier.EU>
---
 configure | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/configure b/configure
index ef84abe..22b27fc 100755
--- a/configure
+++ b/configure
@@ -650,6 +650,10 @@ for opt do
   ;;
   --target-list=*) target_list="$optarg"
   ;;
+  --*-default-cpu=*)
+    tmp=`expr "x$opt" : 'x--\(.*\)-default-cpu=.*'`
+    eval ${tmp}_default_cpu="\"$optarg\""
+  ;;
   --enable-trace-backend=*) trace_backend="$optarg"
   ;;
   --with-trace-file=*) trace_file="$optarg"
@@ -1025,6 +1029,7 @@ echo "                           use %M for cpu name [$interp_prefix]"
 echo "  --target-list=LIST       set target list (default: build everything)"
 echo "Available targets: $default_target_list" | \
     fold -s -w 53 | sed -e 's/^/                           /'
+echo "  --ARCH-default-cpu=CPU   set the default cpu for a given architecture"
 echo ""
 echo "Advanced options (experts only):"
 echo "  --source-path=PATH       path of source code [$source_path]"
@@ -4375,6 +4380,10 @@ upper() {
     echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
 }
 
+tmp_target_default_cpu=`eval echo \\$${target_name}_default_cpu`
+if [ "x$tmp_target_default_cpu" != "x" ] ; then
+  target_default_cpu="$tmp_target_default_cpu"
+fi
 echo "TARGET_DEFAULT_CPU=\"$target_default_cpu\"" >> $config_target_mak
 target_arch_name="`upper $TARGET_ARCH`"
 echo "TARGET_$target_arch_name=y" >> $config_target_mak
-- 
1.8.1.2