qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PATCH v2 07/18] raw: remove the aligned_buf
Date: Thu, 26 Jan 2012 18:22:38 +0100	[thread overview]
Message-ID: <1327598569-5199-8-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1327598569-5199-1-git-send-email-pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 block/raw-posix.c |   25 +++----------------------
 1 files changed, 3 insertions(+), 22 deletions(-)

diff --git a/block/raw-posix.c b/block/raw-posix.c
index 2ee5d69..007d1d3 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -129,8 +129,6 @@ typedef struct BDRVRawState {
     int use_aio;
     void *aio_ctx;
 #endif
-    uint8_t *aligned_buf;
-    unsigned aligned_buf_size;
 #ifdef CONFIG_XFS
     bool is_xfs : 1;
 #endif
@@ -216,23 +214,10 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
         return ret;
     }
     s->fd = fd;
-    s->aligned_buf = NULL;
-
-    if ((bdrv_flags & BDRV_O_NOCACHE)) {
-        /*
-         * Allocate a buffer for read/modify/write cycles.  Chose the size
-         * pessimistically as we don't know the block size yet.
-         */
-        s->aligned_buf_size = 32 * MAX_BLOCKSIZE;
-        s->aligned_buf = qemu_memalign(MAX_BLOCKSIZE, s->aligned_buf_size);
-        if (s->aligned_buf == NULL) {
-            goto out_close;
-        }
-    }
 
     /* We're falling back to POSIX AIO in some cases so init always */
     if (paio_init() < 0) {
-        goto out_free_buf;
+        goto out_close;
     }
 
 #ifdef CONFIG_LINUX_AIO
@@ -245,7 +230,7 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
 
         s->aio_ctx = laio_init();
         if (!s->aio_ctx) {
-            goto out_free_buf;
+            goto out_close;
         }
         s->use_aio = 1;
     } else
@@ -264,8 +249,6 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
 
     return 0;
 
-out_free_buf:
-    qemu_vfree(s->aligned_buf);
 out_close:
     close(fd);
     return -errno;
@@ -326,7 +309,7 @@ static BlockDriverAIOCB *raw_aio_submit(BlockDriverState *bs,
      * boundary.  Check if this is the case or tell the low-level
      * driver that it needs to copy the buffer.
      */
-    if (s->aligned_buf) {
+    if ((bs->open_flags & BDRV_O_NOCACHE)) {
         if (!qiov_is_aligned(bs, qiov)) {
             type |= QEMU_AIO_MISALIGNED;
 #ifdef CONFIG_LINUX_AIO
@@ -374,8 +357,6 @@ static void raw_close(BlockDriverState *bs)
     if (s->fd >= 0) {
         close(s->fd);
         s->fd = -1;
-        if (s->aligned_buf != NULL)
-            qemu_vfree(s->aligned_buf);
     }
 }
 
-- 
1.7.7.6

  parent reply	other threads:[~2012-01-26 17:23 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-26 17:22 [Qemu-devel] [PATCH v2 00/18] Support mismatched host and guest logical block sizes Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 01/18] block: do not rely on open_flags for bdrv_is_snapshot Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 02/18] block: store actual flags in bs->open_flags Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 03/18] block: pass protocol flags up to the format Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 04/18] block: non-raw protocols never cache Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 05/18] block: remove enable_write_cache Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 06/18] block: move flag bits together Paolo Bonzini
2012-01-26 17:22 ` Paolo Bonzini [this message]
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 08/18] block: rename buffer_alignment to guest_block_size Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 09/18] block: add host_block_size Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 10/18] raw: probe host_block_size Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 11/18] iscsi: save host block size Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 12/18] block: allow waiting only for overlapping writes Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 13/18] block: allow waiting at arbitrary granularity Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 14/18] block: protect against "torn reads" for guest_block_size > host_block_size Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 15/18] block: align and serialize I/O when guest_block_size < host_block_size Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 16/18] block: default physical block size to host block size Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 17/18] block: default min_io_size to host block size when doing rmw Paolo Bonzini
2012-01-26 17:22 ` [Qemu-devel] [PATCH v2 18/18] qemu-io: add blocksize argument to open Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1327598569-5199-8-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).