* [Qemu-devel] [PATCH v3 1/7] hw/a15mpcore.c: Add Cortex-A15 private peripheral model
2012-01-30 12:00 [Qemu-devel] [PATCH v3 0/7] Add support for vexpress-a15 Peter Maydell
@ 2012-01-30 12:00 ` Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 2/7] hw/vexpress.c: Make motherboard peripheral memory map table-driven Peter Maydell
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Peter Maydell @ 2012-01-30 12:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Andreas Färber, patches
Add a model of the Cortex-A15 memory mapped private peripheral
space. This is fairly simple because the only memory mapped
bit of the A15 is the GIC.
Note that we don't currently model a VGIC and therefore don't
map the VGIC related bits of the GIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
Makefile.target | 2 +-
hw/a15mpcore.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 100 insertions(+), 1 deletions(-)
create mode 100644 hw/a15mpcore.c
diff --git a/Makefile.target b/Makefile.target
index 68481a3..9deb2f2 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -339,7 +339,7 @@ obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += arm_l2x0.o
-obj-arm-y += arm_mptimer.o
+obj-arm-y += arm_mptimer.o a15mpcore.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
obj-arm-y += highbank.o
obj-arm-y += pl061.o
diff --git a/hw/a15mpcore.c b/hw/a15mpcore.c
new file mode 100644
index 0000000..7b936d9
--- /dev/null
+++ b/hw/a15mpcore.c
@@ -0,0 +1,99 @@
+/*
+ * Cortex-A15MPCore internal peripheral emulation.
+ *
+ * Copyright (c) 2012 Linaro Limited.
+ * Written by Peter Maydell.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "sysbus.h"
+
+/* Configuration for arm_gic.c:
+ * max number of CPUs, how to ID current CPU
+ */
+#define NCPU 4
+
+static inline int gic_get_current_cpu(void)
+{
+ return cpu_single_env->cpu_index;
+}
+
+#include "arm_gic.c"
+
+/* A15MP private memory region. */
+
+typedef struct A15MPPrivState {
+ gic_state gic;
+ uint32_t num_cpu;
+ uint32_t num_irq;
+ MemoryRegion container;
+} A15MPPrivState;
+
+static int a15mp_priv_init(SysBusDevice *dev)
+{
+ A15MPPrivState *s = FROM_SYSBUSGIC(A15MPPrivState, dev);
+
+ if (s->num_cpu > NCPU) {
+ hw_error("a15mp_priv_init: num-cpu may not be more than %d\n", NCPU);
+ }
+
+ gic_init(&s->gic, s->num_cpu, s->num_irq);
+
+ /* Memory map (addresses are offsets from PERIPHBASE):
+ * 0x0000-0x0fff -- reserved
+ * 0x1000-0x1fff -- GIC Distributor
+ * 0x2000-0x2fff -- GIC CPU interface
+ * 0x4000-0x4fff -- GIC virtual interface control (not modelled)
+ * 0x5000-0x5fff -- GIC virtual interface control (not modelled)
+ * 0x6000-0x7fff -- GIC virtual CPU interface (not modelled)
+ */
+ memory_region_init(&s->container, "a15mp-priv-container", 0x8000);
+ memory_region_add_subregion(&s->container, 0x1000, &s->gic.iomem);
+ memory_region_add_subregion(&s->container, 0x2000, &s->gic.cpuiomem[0]);
+
+ sysbus_init_mmio(dev, &s->container);
+ return 0;
+}
+
+static void a15mp_priv_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ k->init = a15mp_priv_init;
+}
+
+static DeviceInfo a15mp_priv_info = {
+ .name = "a15mpcore_priv",
+ .size = sizeof(A15MPPrivState),
+ .class_init = a15mp_priv_class_init,
+ /* We currently have no savable state outside the common GIC state */
+ .props = (Property[]) {
+ DEFINE_PROP_UINT32("num-cpu", A15MPPrivState, num_cpu, 1),
+ /* The Cortex-A15MP may have anything from 0 to 224 external interrupt
+ * IRQ lines (with another 32 internal). We default to 64+32, which
+ * is the number provided by the Cortex-A15MP test chip in the
+ * Versatile Express A15 development board.
+ * Other boards may differ and should set this property appropriately.
+ */
+ DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 96),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void a15mp_register_devices(void)
+{
+ sysbus_register_withprop(&a15mp_priv_info);
+}
+
+device_init(a15mp_register_devices)
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v3 2/7] hw/vexpress.c: Make motherboard peripheral memory map table-driven
2012-01-30 12:00 [Qemu-devel] [PATCH v3 0/7] Add support for vexpress-a15 Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 1/7] hw/a15mpcore.c: Add Cortex-A15 private peripheral model Peter Maydell
@ 2012-01-30 12:00 ` Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 3/7] hw/vexpress.c: Move secondary CPU boot code to SRAM Peter Maydell
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Peter Maydell @ 2012-01-30 12:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Andreas Färber, patches
Pull the addresses used for mapping motherboard peripherals into
memory out into a table. This will allow us to simply provide a
second table to implement the "Cortex-A Series" memory map used by
the A15 variant of Versatile Express, as well as the current
"Legacy" map used by A9.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
---
hw/vexpress.c | 137 +++++++++++++++++++++++++++++++++++++++++++--------------
1 files changed, 103 insertions(+), 34 deletions(-)
diff --git a/hw/vexpress.c b/hw/vexpress.c
index 64fab45..8c4d3b3 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -31,13 +31,80 @@
#include "exec-memory.h"
#define SMP_BOOT_ADDR 0xe0000000
-#define SMP_BOOTREG_ADDR 0x10000030
#define VEXPRESS_BOARD_ID 0x8e0
static struct arm_boot_info vexpress_binfo = {
.smp_loader_start = SMP_BOOT_ADDR,
- .smp_bootreg_addr = SMP_BOOTREG_ADDR,
+};
+
+/* Address maps for peripherals:
+ * the Versatile Express motherboard has two possible maps,
+ * the "legacy" one (used for A9) and the "Cortex-A Series"
+ * map (used for newer cores).
+ * Individual daughterboards can also have different maps for
+ * their peripherals.
+ */
+
+enum {
+ VE_SYSREGS,
+ VE_SP810,
+ VE_SERIALPCI,
+ VE_PL041,
+ VE_MMCI,
+ VE_KMI0,
+ VE_KMI1,
+ VE_UART0,
+ VE_UART1,
+ VE_UART2,
+ VE_UART3,
+ VE_WDT,
+ VE_TIMER01,
+ VE_TIMER23,
+ VE_SERIALDVI,
+ VE_RTC,
+ VE_COMPACTFLASH,
+ VE_CLCD,
+ VE_NORFLASH0,
+ VE_NORFLASH0ALIAS,
+ VE_NORFLASH1,
+ VE_SRAM,
+ VE_VIDEORAM,
+ VE_ETHERNET,
+ VE_USB,
+ VE_DAPROM,
+};
+
+static target_phys_addr_t motherboard_legacy_map[] = {
+ /* CS7: 0x10000000 .. 0x10020000 */
+ [VE_SYSREGS] = 0x10000000,
+ [VE_SP810] = 0x10001000,
+ [VE_SERIALPCI] = 0x10002000,
+ [VE_PL041] = 0x10004000,
+ [VE_MMCI] = 0x10005000,
+ [VE_KMI0] = 0x10006000,
+ [VE_KMI1] = 0x10007000,
+ [VE_UART0] = 0x10009000,
+ [VE_UART1] = 0x1000a000,
+ [VE_UART2] = 0x1000b000,
+ [VE_UART3] = 0x1000c000,
+ [VE_WDT] = 0x1000f000,
+ [VE_TIMER01] = 0x10011000,
+ [VE_TIMER23] = 0x10012000,
+ [VE_SERIALDVI] = 0x10016000,
+ [VE_RTC] = 0x10017000,
+ [VE_COMPACTFLASH] = 0x1001a000,
+ [VE_CLCD] = 0x1001f000,
+ /* CS0: 0x40000000 .. 0x44000000 */
+ [VE_NORFLASH0] = 0x40000000,
+ /* CS1: 0x44000000 .. 0x48000000 */
+ [VE_NORFLASH1] = 0x44000000,
+ /* CS2: 0x48000000 .. 0x4a000000 */
+ [VE_SRAM] = 0x48000000,
+ /* CS3: 0x4c000000 .. 0x50000000 */
+ [VE_VIDEORAM] = 0x4c000000,
+ [VE_ETHERNET] = 0x4e000000,
+ [VE_USB] = 0x4f000000,
};
static void vexpress_a9_init(ram_addr_t ram_size,
@@ -61,6 +128,7 @@ static void vexpress_a9_init(ram_addr_t ram_size,
uint32_t proc_id;
uint32_t sys_id;
ram_addr_t low_ram_size, vram_size, sram_size;
+ target_phys_addr_t *map = motherboard_legacy_map;
if (!cpu_model) {
cpu_model = "cortex-a9";
@@ -116,53 +184,53 @@ static void vexpress_a9_init(ram_addr_t ram_size,
pic[n] = qdev_get_gpio_in(dev, n);
}
- /* Motherboard peripherals CS7 : 0x10000000 .. 0x10020000 */
+ /* Motherboard peripherals: the wiring is the same but the
+ * addresses vary between the legacy and A-Series memory maps.
+ */
+
sys_id = 0x1190f500;
proc_id = 0x0c000191;
- /* 0x10000000 System registers */
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_init_nofail(sysctl);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
- sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
+ sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, map[VE_SYSREGS]);
+
+ /* VE_SP810: not modelled */
+ /* VE_SERIALPCI: not modelled */
- /* 0x10001000 SP810 system control */
- /* 0x10002000 serial bus PCI */
- /* 0x10004000 PL041 audio */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
- sysbus_mmio_map(sysbus_from_qdev(pl041), 0, 0x10004000);
+ sysbus_mmio_map(sysbus_from_qdev(pl041), 0, map[VE_PL041]);
sysbus_connect_irq(sysbus_from_qdev(pl041), 0, pic[11]);
- dev = sysbus_create_varargs("pl181", 0x10005000, pic[9], pic[10], NULL);
+ dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
- sysbus_create_simple("pl050_keyboard", 0x10006000, pic[12]);
- sysbus_create_simple("pl050_mouse", 0x10007000, pic[13]);
-
- sysbus_create_simple("pl011", 0x10009000, pic[5]);
- sysbus_create_simple("pl011", 0x1000a000, pic[6]);
- sysbus_create_simple("pl011", 0x1000b000, pic[7]);
- sysbus_create_simple("pl011", 0x1000c000, pic[8]);
+ sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
+ sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
- /* 0x1000f000 SP805 WDT */
+ sysbus_create_simple("pl011", map[VE_UART0], pic[5]);
+ sysbus_create_simple("pl011", map[VE_UART1], pic[6]);
+ sysbus_create_simple("pl011", map[VE_UART2], pic[7]);
+ sysbus_create_simple("pl011", map[VE_UART3], pic[8]);
- sysbus_create_simple("sp804", 0x10011000, pic[2]);
- sysbus_create_simple("sp804", 0x10012000, pic[3]);
+ sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
+ sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);
- /* 0x10016000 Serial Bus DVI */
+ /* VE_SERIALDVI: not modelled */
- sysbus_create_simple("pl031", 0x10017000, pic[4]); /* RTC */
+ sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
- /* 0x1001a000 Compact Flash */
+ /* VE_COMPACTFLASH: not modelled */
- /* 0x1001f000 PL111 CLCD (motherboard) */
+ /* VE_CLCD: not modelled (we use the daughterboard CLCD only) */
/* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
@@ -184,28 +252,28 @@ static void vexpress_a9_init(ram_addr_t ram_size,
/* 0x1e00a000 PL310 L2 Cache Controller */
sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
- /* CS0: NOR0 flash : 0x40000000 .. 0x44000000 */
- /* CS4: NOR1 flash : 0x44000000 .. 0x48000000 */
- /* CS2: SRAM : 0x48000000 .. 0x4a000000 */
+ /* VE_NORFLASH0: not modelled */
+ /* VE_NORFLASH0ALIAS: not modelled */
+ /* VE_NORFLASH1: not modelled */
+
sram_size = 0x2000000;
memory_region_init_ram(sram, "vexpress.sram", sram_size);
vmstate_register_ram_global(sram);
- memory_region_add_subregion(sysmem, 0x48000000, sram);
-
- /* CS3: USB, ethernet, VRAM : 0x4c000000 .. 0x50000000 */
+ memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
- /* 0x4c000000 Video RAM */
vram_size = 0x800000;
memory_region_init_ram(vram, "vexpress.vram", vram_size);
vmstate_register_ram_global(vram);
- memory_region_add_subregion(sysmem, 0x4c000000, vram);
+ memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].vlan) {
- lan9118_init(&nd_table[0], 0x4e000000, pic[15]);
+ lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
}
- /* 0x4f000000 ISP1761 USB */
+ /* VE_USB: not modelled */
+
+ /* VE_DAPROM: not modelled */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
@@ -222,6 +290,7 @@ static void vexpress_a9_init(ram_addr_t ram_size,
vexpress_binfo.nb_cpus = smp_cpus;
vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
vexpress_binfo.loader_start = 0x60000000;
+ vexpress_binfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
arm_load_kernel(first_cpu, &vexpress_binfo);
}
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v3 3/7] hw/vexpress.c: Move secondary CPU boot code to SRAM
2012-01-30 12:00 [Qemu-devel] [PATCH v3 0/7] Add support for vexpress-a15 Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 1/7] hw/a15mpcore.c: Add Cortex-A15 private peripheral model Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 2/7] hw/vexpress.c: Make motherboard peripheral memory map table-driven Peter Maydell
@ 2012-01-30 12:00 ` Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 4/7] hw/vexpress.c: Factor out daughterboard-specific initialization Peter Maydell
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Peter Maydell @ 2012-01-30 12:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Andreas Färber, patches
On real Versatile Express hardware, the boot ROM puts the secondary
CPU bootcode/holding pen in SRAM. We can therefore rely on Linux not
trashing this memory until secondary CPUs have booted up, and can
put our QEMU-specific pen code in the same place. This allows us to
drop the odd "hack" RAM page we were using before.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/vexpress.c | 16 ++--------------
1 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/hw/vexpress.c b/hw/vexpress.c
index 8c4d3b3..99a9690 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -30,13 +30,9 @@
#include "boards.h"
#include "exec-memory.h"
-#define SMP_BOOT_ADDR 0xe0000000
-
#define VEXPRESS_BOARD_ID 0x8e0
-static struct arm_boot_info vexpress_binfo = {
- .smp_loader_start = SMP_BOOT_ADDR,
-};
+static struct arm_boot_info vexpress_binfo;
/* Address maps for peripherals:
* the Versatile Express motherboard has two possible maps,
@@ -118,7 +114,6 @@ static void vexpress_a9_init(ram_addr_t ram_size,
MemoryRegion *lowram = g_new(MemoryRegion, 1);
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
- MemoryRegion *hackram = g_new(MemoryRegion, 1);
DeviceState *dev, *sysctl, *pl041;
SysBusDevice *busdev;
qemu_irq *irqp;
@@ -275,14 +270,6 @@ static void vexpress_a9_init(ram_addr_t ram_size,
/* VE_DAPROM: not modelled */
- /* ??? Hack to map an additional page of ram for the secondary CPU
- startup code. I guess this works on real hardware because the
- BootROM happens to be in ROM/flash or in memory that isn't clobbered
- until after Linux boots the secondary CPUs. */
- memory_region_init_ram(hackram, "vexpress.hack", 0x1000);
- vmstate_register_ram_global(hackram);
- memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, hackram);
-
vexpress_binfo.ram_size = ram_size;
vexpress_binfo.kernel_filename = kernel_filename;
vexpress_binfo.kernel_cmdline = kernel_cmdline;
@@ -290,6 +277,7 @@ static void vexpress_a9_init(ram_addr_t ram_size,
vexpress_binfo.nb_cpus = smp_cpus;
vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
vexpress_binfo.loader_start = 0x60000000;
+ vexpress_binfo.smp_loader_start = map[VE_SRAM];
vexpress_binfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
arm_load_kernel(first_cpu, &vexpress_binfo);
}
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v3 4/7] hw/vexpress.c: Factor out daughterboard-specific initialization
2012-01-30 12:00 [Qemu-devel] [PATCH v3 0/7] Add support for vexpress-a15 Peter Maydell
` (2 preceding siblings ...)
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 3/7] hw/vexpress.c: Move secondary CPU boot code to SRAM Peter Maydell
@ 2012-01-30 12:00 ` Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 5/7] hw/vexpress.c: Instantiate the motherboard CLCD Peter Maydell
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Peter Maydell @ 2012-01-30 12:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Andreas Färber, patches
Factor out daughterboard specifics into a data structure and
daughterboard initialization function, in preparation for adding
vexpress-a15 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/vexpress.c | 118 ++++++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 83 insertions(+), 35 deletions(-)
diff --git a/hw/vexpress.c b/hw/vexpress.c
index 99a9690..26537f7 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -103,32 +103,43 @@ static target_phys_addr_t motherboard_legacy_map[] = {
[VE_USB] = 0x4f000000,
};
-static void vexpress_a9_init(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename, const char *kernel_cmdline,
- const char *initrd_filename, const char *cpu_model)
+/* Structure defining the peculiarities of a specific daughterboard */
+
+typedef struct VEDBoardInfo VEDBoardInfo;
+
+typedef void DBoardInitFn(const VEDBoardInfo *daughterboard,
+ ram_addr_t ram_size,
+ const char *cpu_model,
+ qemu_irq *pic, uint32_t *proc_id);
+
+struct VEDBoardInfo {
+ const target_phys_addr_t *motherboard_map;
+ target_phys_addr_t loader_start;
+ DBoardInitFn *init;
+};
+
+static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
+ ram_addr_t ram_size,
+ const char *cpu_model,
+ qemu_irq *pic, uint32_t *proc_id)
{
CPUState *env = NULL;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *lowram = g_new(MemoryRegion, 1);
- MemoryRegion *vram = g_new(MemoryRegion, 1);
- MemoryRegion *sram = g_new(MemoryRegion, 1);
- DeviceState *dev, *sysctl, *pl041;
+ DeviceState *dev;
SysBusDevice *busdev;
qemu_irq *irqp;
- qemu_irq pic[64];
int n;
qemu_irq cpu_irq[4];
- uint32_t proc_id;
- uint32_t sys_id;
- ram_addr_t low_ram_size, vram_size, sram_size;
- target_phys_addr_t *map = motherboard_legacy_map;
+ ram_addr_t low_ram_size;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
+ *proc_id = 0x0c000191;
+
for (n = 0; n < smp_cpus; n++) {
env = cpu_init(cpu_model);
if (!env) {
@@ -141,7 +152,7 @@ static void vexpress_a9_init(ram_addr_t ram_size,
if (ram_size > 0x40000000) {
/* 1GB is the maximum the address space permits */
- fprintf(stderr, "vexpress: cannot model more than 1GB RAM\n");
+ fprintf(stderr, "vexpress-a9: cannot model more than 1GB RAM\n");
exit(1);
}
@@ -179,12 +190,58 @@ static void vexpress_a9_init(ram_addr_t ram_size,
pic[n] = qdev_get_gpio_in(dev, n);
}
+ /* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
+
+ /* 0x10020000 PL111 CLCD (daughterboard) */
+ sysbus_create_simple("pl111", 0x10020000, pic[44]);
+
+ /* 0x10060000 AXI RAM */
+ /* 0x100e0000 PL341 Dynamic Memory Controller */
+ /* 0x100e1000 PL354 Static Memory Controller */
+ /* 0x100e2000 System Configuration Controller */
+
+ sysbus_create_simple("sp804", 0x100e4000, pic[48]);
+ /* 0x100e5000 SP805 Watchdog module */
+ /* 0x100e6000 BP147 TrustZone Protection Controller */
+ /* 0x100e9000 PL301 'Fast' AXI matrix */
+ /* 0x100ea000 PL301 'Slow' AXI matrix */
+ /* 0x100ec000 TrustZone Address Space Controller */
+ /* 0x10200000 CoreSight debug APB */
+ /* 0x1e00a000 PL310 L2 Cache Controller */
+ sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
+}
+
+static const VEDBoardInfo a9_daughterboard = {
+ .motherboard_map = motherboard_legacy_map,
+ .loader_start = 0x60000000,
+ .init = a9_daughterboard_init,
+};
+
+static void vexpress_common_init(const VEDBoardInfo *daughterboard,
+ ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ DeviceState *dev, *sysctl, *pl041;
+ qemu_irq pic[64];
+ uint32_t proc_id;
+ uint32_t sys_id;
+ ram_addr_t vram_size, sram_size;
+ MemoryRegion *sysmem = get_system_memory();
+ MemoryRegion *vram = g_new(MemoryRegion, 1);
+ MemoryRegion *sram = g_new(MemoryRegion, 1);
+ const target_phys_addr_t *map = daughterboard->motherboard_map;
+
+ daughterboard->init(daughterboard, ram_size, cpu_model, pic, &proc_id);
+
/* Motherboard peripherals: the wiring is the same but the
* addresses vary between the legacy and A-Series memory maps.
*/
sys_id = 0x1190f500;
- proc_id = 0x0c000191;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
@@ -227,26 +284,6 @@ static void vexpress_a9_init(ram_addr_t ram_size,
/* VE_CLCD: not modelled (we use the daughterboard CLCD only) */
- /* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
-
- /* 0x10020000 PL111 CLCD (daughterboard) */
- sysbus_create_simple("pl111", 0x10020000, pic[44]);
-
- /* 0x10060000 AXI RAM */
- /* 0x100e0000 PL341 Dynamic Memory Controller */
- /* 0x100e1000 PL354 Static Memory Controller */
- /* 0x100e2000 System Configuration Controller */
-
- sysbus_create_simple("sp804", 0x100e4000, pic[48]);
- /* 0x100e5000 SP805 Watchdog module */
- /* 0x100e6000 BP147 TrustZone Protection Controller */
- /* 0x100e9000 PL301 'Fast' AXI matrix */
- /* 0x100ea000 PL301 'Slow' AXI matrix */
- /* 0x100ec000 TrustZone Address Space Controller */
- /* 0x10200000 CoreSight debug APB */
- /* 0x1e00a000 PL310 L2 Cache Controller */
- sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
-
/* VE_NORFLASH0: not modelled */
/* VE_NORFLASH0ALIAS: not modelled */
/* VE_NORFLASH1: not modelled */
@@ -276,12 +313,23 @@ static void vexpress_a9_init(ram_addr_t ram_size,
vexpress_binfo.initrd_filename = initrd_filename;
vexpress_binfo.nb_cpus = smp_cpus;
vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
- vexpress_binfo.loader_start = 0x60000000;
+ vexpress_binfo.loader_start = daughterboard->loader_start;
vexpress_binfo.smp_loader_start = map[VE_SRAM];
vexpress_binfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
arm_load_kernel(first_cpu, &vexpress_binfo);
}
+static void vexpress_a9_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ vexpress_common_init(&a9_daughterboard,
+ ram_size, boot_device, kernel_filename,
+ kernel_cmdline, initrd_filename, cpu_model);
+}
static QEMUMachine vexpress_a9_machine = {
.name = "vexpress-a9",
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v3 5/7] hw/vexpress.c: Instantiate the motherboard CLCD
2012-01-30 12:00 [Qemu-devel] [PATCH v3 0/7] Add support for vexpress-a15 Peter Maydell
` (3 preceding siblings ...)
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 4/7] hw/vexpress.c: Factor out daughterboard-specific initialization Peter Maydell
@ 2012-01-30 12:00 ` Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 6/7] arm_boot: Pass base address of GIC CPU interface, not whole GIC Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 7/7] hw/vexpress.c: Add vexpress-a15 machine Peter Maydell
6 siblings, 0 replies; 8+ messages in thread
From: Peter Maydell @ 2012-01-30 12:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Andreas Färber, patches
Instantiate the CLCD on the vexpress motherboard as well as one on
the daughterboard -- the A15 daughterboard does not have a CLCD
and so relies on the motherboard one.
At the moment QEMU doesn't provide infrastructure for selecting
which display device gets to actually show graphics -- the first
one registered is it. Fortunately this works for the major use
case (Linux): if the daughterboard has a CLCD it will come first
and be used, otherwise we fall back to the motherboard CLCD.
So we don't (currently) need to implement the control register
which allows software to tell the mux which video output to pass
through to the outside world.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
---
hw/vexpress.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/hw/vexpress.c b/hw/vexpress.c
index 26537f7..27459d9 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -282,7 +282,7 @@ static void vexpress_common_init(const VEDBoardInfo *daughterboard,
/* VE_COMPACTFLASH: not modelled */
- /* VE_CLCD: not modelled (we use the daughterboard CLCD only) */
+ sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
/* VE_NORFLASH0: not modelled */
/* VE_NORFLASH0ALIAS: not modelled */
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v3 6/7] arm_boot: Pass base address of GIC CPU interface, not whole GIC
2012-01-30 12:00 [Qemu-devel] [PATCH v3 0/7] Add support for vexpress-a15 Peter Maydell
` (4 preceding siblings ...)
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 5/7] hw/vexpress.c: Instantiate the motherboard CLCD Peter Maydell
@ 2012-01-30 12:00 ` Peter Maydell
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 7/7] hw/vexpress.c: Add vexpress-a15 machine Peter Maydell
6 siblings, 0 replies; 8+ messages in thread
From: Peter Maydell @ 2012-01-30 12:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Andreas Färber, patches
The arm_boot secondary boot loader code needs the address of
the GIC CPU interface. Obtaining this from the base address
of the private peripheral region was possible for A9 and 11MPcore,
but the A15 puts the GIC CPU interface in a different place.
So make boards pass in the GIC CPU interface address directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm-misc.h | 2 +-
hw/arm_boot.c | 8 ++++----
hw/realview.c | 12 +++++++-----
hw/vexpress.c | 6 ++++--
4 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/hw/arm-misc.h b/hw/arm-misc.h
index 5e5204b..306013a 100644
--- a/hw/arm-misc.h
+++ b/hw/arm-misc.h
@@ -37,7 +37,7 @@ struct arm_boot_info {
*/
target_phys_addr_t smp_loader_start;
target_phys_addr_t smp_bootreg_addr;
- target_phys_addr_t smp_priv_base;
+ target_phys_addr_t gic_cpu_if_addr;
int nb_cpus;
int board_id;
int (*atag_board)(const struct arm_boot_info *info, void *p);
diff --git a/hw/arm_boot.c b/hw/arm_boot.c
index 5f163fd..4637636 100644
--- a/hw/arm_boot.c
+++ b/hw/arm_boot.c
@@ -43,16 +43,16 @@ static uint32_t bootloader[] = {
* location for the kernel secondary CPU entry point.
*/
static uint32_t smpboot[] = {
- 0xe59f201c, /* ldr r2, privbase */
+ 0xe59f201c, /* ldr r2, gic_cpu_if */
0xe59f001c, /* ldr r0, startaddr */
0xe3a01001, /* mov r1, #1 */
- 0xe5821100, /* str r1, [r2, #256] */
+ 0xe5821000, /* str r1, [r2] */
0xe320f003, /* wfi */
0xe5901000, /* ldr r1, [r0] */
0xe1110001, /* tst r1, r1 */
0x0afffffb, /* beq <wfi> */
0xe12fff11, /* bx r1 */
- 0, /* privbase: Private memory region base address. */
+ 0, /* gic_cpu_if: base address of GIC CPU interface */
0 /* bootreg: Boot register address is held here */
};
@@ -61,7 +61,7 @@ static void default_write_secondary(CPUState *env,
{
int n;
smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr;
- smpboot[ARRAY_SIZE(smpboot) - 2] = info->smp_priv_base;
+ smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr;
for (n = 0; n < ARRAY_SIZE(smpboot); n++) {
smpboot[n] = tswap32(smpboot[n]);
}
diff --git a/hw/realview.c b/hw/realview.c
index 42a0f20..91b60f4 100644
--- a/hw/realview.c
+++ b/hw/realview.c
@@ -221,21 +221,23 @@ static void realview_init(ram_addr_t ram_size,
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
if (is_mpcore) {
+ target_phys_addr_t periphbase;
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
if (is_pb) {
- realview_binfo.smp_priv_base = 0x1f000000;
+ periphbase = 0x1f000000;
} else {
- realview_binfo.smp_priv_base = 0x10100000;
+ periphbase = 0x10100000;
}
- sysbus_mmio_map(busdev, 0, realview_binfo.smp_priv_base);
+ sysbus_mmio_map(busdev, 0, periphbase);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
- sysbus_create_varargs("l2x0", realview_binfo.smp_priv_base + 0x2000,
- NULL);
+ sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
+ /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
+ realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
} else {
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
/* For now just create the nIRQ GIC, and ignore the others. */
diff --git a/hw/vexpress.c b/hw/vexpress.c
index 27459d9..a5b9448 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -115,6 +115,7 @@ typedef void DBoardInitFn(const VEDBoardInfo *daughterboard,
struct VEDBoardInfo {
const target_phys_addr_t *motherboard_map;
target_phys_addr_t loader_start;
+ const target_phys_addr_t gic_cpu_if_addr;
DBoardInitFn *init;
};
@@ -175,8 +176,7 @@ static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
- vexpress_binfo.smp_priv_base = 0x1e000000;
- sysbus_mmio_map(busdev, 0, vexpress_binfo.smp_priv_base);
+ sysbus_mmio_map(busdev, 0, 0x1e000000);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
@@ -214,6 +214,7 @@ static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
static const VEDBoardInfo a9_daughterboard = {
.motherboard_map = motherboard_legacy_map,
.loader_start = 0x60000000,
+ .gic_cpu_if_addr = 0x1e000100,
.init = a9_daughterboard_init,
};
@@ -316,6 +317,7 @@ static void vexpress_common_init(const VEDBoardInfo *daughterboard,
vexpress_binfo.loader_start = daughterboard->loader_start;
vexpress_binfo.smp_loader_start = map[VE_SRAM];
vexpress_binfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
+ vexpress_binfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
arm_load_kernel(first_cpu, &vexpress_binfo);
}
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v3 7/7] hw/vexpress.c: Add vexpress-a15 machine
2012-01-30 12:00 [Qemu-devel] [PATCH v3 0/7] Add support for vexpress-a15 Peter Maydell
` (5 preceding siblings ...)
2012-01-30 12:00 ` [Qemu-devel] [PATCH v3 6/7] arm_boot: Pass base address of GIC CPU interface, not whole GIC Peter Maydell
@ 2012-01-30 12:00 ` Peter Maydell
6 siblings, 0 replies; 8+ messages in thread
From: Peter Maydell @ 2012-01-30 12:00 UTC (permalink / raw)
To: qemu-devel; +Cc: Andreas Färber, patches
Add the vexpress-a15 machine, and the A-Series memory map it uses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
---
hw/vexpress.c | 141 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 141 insertions(+), 0 deletions(-)
diff --git a/hw/vexpress.c b/hw/vexpress.c
index a5b9448..cb2ab39 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -103,6 +103,41 @@ static target_phys_addr_t motherboard_legacy_map[] = {
[VE_USB] = 0x4f000000,
};
+static target_phys_addr_t motherboard_aseries_map[] = {
+ /* CS0: 0x00000000 .. 0x0c000000 */
+ [VE_NORFLASH0] = 0x00000000,
+ [VE_NORFLASH0ALIAS] = 0x08000000,
+ /* CS4: 0x0c000000 .. 0x10000000 */
+ [VE_NORFLASH1] = 0x0c000000,
+ /* CS5: 0x10000000 .. 0x14000000 */
+ /* CS1: 0x14000000 .. 0x18000000 */
+ [VE_SRAM] = 0x14000000,
+ /* CS2: 0x18000000 .. 0x1c000000 */
+ [VE_VIDEORAM] = 0x18000000,
+ [VE_ETHERNET] = 0x1a000000,
+ [VE_USB] = 0x1b000000,
+ /* CS3: 0x1c000000 .. 0x20000000 */
+ [VE_DAPROM] = 0x1c000000,
+ [VE_SYSREGS] = 0x1c010000,
+ [VE_SP810] = 0x1c020000,
+ [VE_SERIALPCI] = 0x1c030000,
+ [VE_PL041] = 0x1c040000,
+ [VE_MMCI] = 0x1c050000,
+ [VE_KMI0] = 0x1c060000,
+ [VE_KMI1] = 0x1c070000,
+ [VE_UART0] = 0x1c090000,
+ [VE_UART1] = 0x1c0a0000,
+ [VE_UART2] = 0x1c0b0000,
+ [VE_UART3] = 0x1c0c0000,
+ [VE_WDT] = 0x1c0f0000,
+ [VE_TIMER01] = 0x1c110000,
+ [VE_TIMER23] = 0x1c120000,
+ [VE_SERIALDVI] = 0x1c160000,
+ [VE_RTC] = 0x1c170000,
+ [VE_COMPACTFLASH] = 0x1c1a0000,
+ [VE_CLCD] = 0x1c1f0000,
+};
+
/* Structure defining the peculiarities of a specific daughterboard */
typedef struct VEDBoardInfo VEDBoardInfo;
@@ -218,6 +253,91 @@ static const VEDBoardInfo a9_daughterboard = {
.init = a9_daughterboard_init,
};
+static void a15_daughterboard_init(const VEDBoardInfo *daughterboard,
+ ram_addr_t ram_size,
+ const char *cpu_model,
+ qemu_irq *pic, uint32_t *proc_id)
+{
+ int n;
+ CPUState *env = NULL;
+ MemoryRegion *sysmem = get_system_memory();
+ MemoryRegion *ram = g_new(MemoryRegion, 1);
+ MemoryRegion *sram = g_new(MemoryRegion, 1);
+ qemu_irq cpu_irq[4];
+ DeviceState *dev;
+ SysBusDevice *busdev;
+
+ if (!cpu_model) {
+ cpu_model = "cortex-a15";
+ }
+
+ *proc_id = 0x14000217;
+
+ for (n = 0; n < smp_cpus; n++) {
+ qemu_irq *irqp;
+ env = cpu_init(cpu_model);
+ if (!env) {
+ fprintf(stderr, "Unable to find CPU definition\n");
+ exit(1);
+ }
+ irqp = arm_pic_init_cpu(env);
+ cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
+ }
+
+ if (ram_size > 0x80000000) {
+ fprintf(stderr, "vexpress-a15: cannot model more than 2GB RAM\n");
+ exit(1);
+ }
+
+ memory_region_init_ram(ram, "vexpress.highmem", ram_size);
+ vmstate_register_ram_global(ram);
+ /* RAM is from 0x80000000 upwards; there is no low-memory alias for it. */
+ memory_region_add_subregion(sysmem, 0x80000000, ram);
+
+ /* 0x2c000000 A15MPCore private memory region (GIC) */
+ dev = qdev_create(NULL, "a15mpcore_priv");
+ qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
+ qdev_init_nofail(dev);
+ busdev = sysbus_from_qdev(dev);
+ sysbus_mmio_map(busdev, 0, 0x2c000000);
+ for (n = 0; n < smp_cpus; n++) {
+ sysbus_connect_irq(busdev, n, cpu_irq[n]);
+ }
+ /* Interrupts [42:0] are from the motherboard;
+ * [47:43] are reserved; [63:48] are daughterboard
+ * peripherals. Note that some documentation numbers
+ * external interrupts starting from 32 (because there
+ * are internal interrupts 0..31).
+ */
+ for (n = 0; n < 64; n++) {
+ pic[n] = qdev_get_gpio_in(dev, n);
+ }
+
+ /* A15 daughterboard peripherals: */
+
+ /* 0x20000000: CoreSight interfaces: not modelled */
+ /* 0x2a000000: PL301 AXI interconnect: not modelled */
+ /* 0x2a420000: SCC: not modelled */
+ /* 0x2a430000: system counter: not modelled */
+ /* 0x2b000000: HDLCD controller: not modelled */
+ /* 0x2b060000: SP805 watchdog: not modelled */
+ /* 0x2b0a0000: PL341 dynamic memory controller: not modelled */
+ /* 0x2e000000: system SRAM */
+ memory_region_init_ram(sram, "vexpress.a15sram", 0x10000);
+ vmstate_register_ram_global(sram);
+ memory_region_add_subregion(sysmem, 0x2e000000, sram);
+
+ /* 0x7ffb0000: DMA330 DMA controller: not modelled */
+ /* 0x7ffd0000: PL354 static memory controller: not modelled */
+}
+
+static const VEDBoardInfo a15_daughterboard = {
+ .motherboard_map = motherboard_aseries_map,
+ .loader_start = 0x80000000,
+ .gic_cpu_if_addr = 0x2c002000,
+ .init = a15_daughterboard_init,
+};
+
static void vexpress_common_init(const VEDBoardInfo *daughterboard,
ram_addr_t ram_size,
const char *boot_device,
@@ -333,6 +453,18 @@ static void vexpress_a9_init(ram_addr_t ram_size,
kernel_cmdline, initrd_filename, cpu_model);
}
+static void vexpress_a15_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ vexpress_common_init(&a15_daughterboard,
+ ram_size, boot_device, kernel_filename,
+ kernel_cmdline, initrd_filename, cpu_model);
+}
+
static QEMUMachine vexpress_a9_machine = {
.name = "vexpress-a9",
.desc = "ARM Versatile Express for Cortex-A9",
@@ -341,9 +473,18 @@ static QEMUMachine vexpress_a9_machine = {
.max_cpus = 4,
};
+static QEMUMachine vexpress_a15_machine = {
+ .name = "vexpress-a15",
+ .desc = "ARM Versatile Express for Cortex-A15",
+ .init = vexpress_a15_init,
+ .use_scsi = 1,
+ .max_cpus = 4,
+};
+
static void vexpress_machine_init(void)
{
qemu_register_machine(&vexpress_a9_machine);
+ qemu_register_machine(&vexpress_a15_machine);
}
machine_init(vexpress_machine_init);
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread