qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 21/28] usb: pass USBEndpoint to usb_wakeup
Date: Fri, 10 Feb 2012 12:43:17 +0100	[thread overview]
Message-ID: <1328874204-20920-22-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1328874204-20920-1-git-send-email-kraxel@redhat.com>

Devices must specify which endpoint has data to transfer now.
The plan is to use the usb_wakeup() not only for remove wakeup support,
but for "data ready" signaling in general, so we can move away from
constant polling to event driven usb device emulation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/usb-ccid.c |    4 +++-
 hw/usb-hid.c  |    4 +++-
 hw/usb-hub.c  |    8 +++++---
 hw/usb.c      |    4 +++-
 hw/usb.h      |    2 +-
 5 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/hw/usb-ccid.c b/hw/usb-ccid.c
index 8c0c717..fda2d92 100644
--- a/hw/usb-ccid.c
+++ b/hw/usb-ccid.c
@@ -267,6 +267,7 @@ typedef struct CCIDBus {
  */
 typedef struct USBCCIDState {
     USBDevice dev;
+    USBEndpoint *intr;
     CCIDBus bus;
     CCIDCardState *card;
     BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */
@@ -839,7 +840,7 @@ static void ccid_on_slot_change(USBCCIDState *s, bool full)
         s->bmSlotICCState |= SLOT_0_CHANGED_MASK;
     }
     s->notify_slot_change = true;
-    usb_wakeup(&s->dev);
+    usb_wakeup(s->intr);
 }
 
 static void ccid_write_data_block_error(
@@ -1190,6 +1191,7 @@ static int ccid_initfn(USBDevice *dev)
 
     usb_desc_init(dev);
     qbus_create_inplace(&s->bus.qbus, &ccid_bus_info, &dev->qdev, NULL);
+    s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP);
     s->bus.qbus.allow_hotplug = 1;
     s->card = NULL;
     s->migration_state = MIGRATION_NONE;
diff --git a/hw/usb-hid.c b/hw/usb-hid.c
index 4d00c28..53353d3 100644
--- a/hw/usb-hid.c
+++ b/hw/usb-hid.c
@@ -44,6 +44,7 @@
 
 typedef struct USBHIDState {
     USBDevice dev;
+    USBEndpoint *intr;
     HIDState hid;
 } USBHIDState;
 
@@ -360,7 +361,7 @@ static void usb_hid_changed(HIDState *hs)
 {
     USBHIDState *us = container_of(hs, USBHIDState, hid);
 
-    usb_wakeup(&us->dev);
+    usb_wakeup(us->intr);
 }
 
 static void usb_hid_handle_reset(USBDevice *dev)
@@ -501,6 +502,7 @@ static int usb_hid_initfn(USBDevice *dev, int kind)
     USBHIDState *us = DO_UPCAST(USBHIDState, dev, dev);
 
     usb_desc_init(dev);
+    us->intr = usb_ep_get(dev, USB_TOKEN_IN, 1);
     hid_init(&us->hid, kind, usb_hid_changed);
     return 0;
 }
diff --git a/hw/usb-hub.c b/hw/usb-hub.c
index 940e211..6d1ce06 100644
--- a/hw/usb-hub.c
+++ b/hw/usb-hub.c
@@ -37,6 +37,7 @@ typedef struct USBHubPort {
 
 typedef struct USBHubState {
     USBDevice dev;
+    USBEndpoint *intr;
     USBHubPort ports[NUM_PORTS];
 } USBHubState;
 
@@ -163,7 +164,7 @@ static void usb_hub_attach(USBPort *port1)
     } else {
         port->wPortStatus &= ~PORT_STAT_LOW_SPEED;
     }
-    usb_wakeup(&s->dev);
+    usb_wakeup(s->intr);
 }
 
 static void usb_hub_detach(USBPort *port1)
@@ -171,7 +172,7 @@ static void usb_hub_detach(USBPort *port1)
     USBHubState *s = port1->opaque;
     USBHubPort *port = &s->ports[port1->index];
 
-    usb_wakeup(&s->dev);
+    usb_wakeup(s->intr);
 
     /* Let upstream know the device on this port is gone */
     s->dev.port->ops->child_detach(s->dev.port, port1->dev);
@@ -199,7 +200,7 @@ static void usb_hub_wakeup(USBPort *port1)
 
     if (port->wPortStatus & PORT_STAT_SUSPEND) {
         port->wPortChange |= PORT_STAT_C_SUSPEND;
-        usb_wakeup(&s->dev);
+        usb_wakeup(s->intr);
     }
 }
 
@@ -481,6 +482,7 @@ static int usb_hub_initfn(USBDevice *dev)
     int i;
 
     usb_desc_init(dev);
+    s->intr = usb_ep_get(dev, USB_TOKEN_IN, 1);
     for (i = 0; i < NUM_PORTS; i++) {
         port = &s->ports[i];
         usb_register_port(usb_bus_from_device(dev),
diff --git a/hw/usb.c b/hw/usb.c
index 712bdd4..0572547 100644
--- a/hw/usb.c
+++ b/hw/usb.c
@@ -70,8 +70,10 @@ void usb_device_reset(USBDevice *dev)
     usb_device_handle_reset(dev);
 }
 
-void usb_wakeup(USBDevice *dev)
+void usb_wakeup(USBEndpoint *ep)
 {
+    USBDevice *dev = ep->dev;
+
     if (dev->remote_wakeup && dev->port && dev->port->ops->wakeup) {
         dev->port->ops->wakeup(dev->port);
     }
diff --git a/hw/usb.h b/hw/usb.h
index 6545b69..b2caa77 100644
--- a/hw/usb.h
+++ b/hw/usb.h
@@ -368,7 +368,7 @@ void usb_attach(USBPort *port);
 void usb_detach(USBPort *port);
 void usb_port_reset(USBPort *port);
 void usb_device_reset(USBDevice *dev);
-void usb_wakeup(USBDevice *dev);
+void usb_wakeup(USBEndpoint *ep);
 void usb_generic_async_ctrl_complete(USBDevice *s, USBPacket *p);
 int set_usb_string(uint8_t *buf, const char *str);
 
-- 
1.7.1

  parent reply	other threads:[~2012-02-10 11:44 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-10 11:42 [Qemu-devel] [PULL 00/28] usb patch queue Gerd Hoffmann
2012-02-10 11:42 ` [Qemu-devel] [PATCH 01/28] usb-uhci: implement bandwidth management Gerd Hoffmann
2012-02-10 11:42 ` [Qemu-devel] [PATCH 02/28] usb-ehci: Clear the portstatus powner bit on device disconnect Gerd Hoffmann
2012-02-10 11:42 ` [Qemu-devel] [PATCH 03/28] usb-redir: Add the posibility to filter out certain devices from redirecion Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 04/28] usb: kill USB_MSG_{ATTACH,DETACH} Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 05/28] usb: kill USB_MSG_RESET Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 06/28] usb: kill usb_send_msg Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 07/28] usb: add usb_find_device() Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 08/28] usb-hub: implement find_device Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 09/28] usb: handle dev == NULL in usb_handle_packet() Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 10/28] usb-uhci: switch to usb_find_device() Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 11/28] usb-ehci: " Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 12/28] usb-ohci: " Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 13/28] usb-musb: " Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 14/28] usb-xhci: " Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 15/28] usb: kill handle_packet callback Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 16/28] usb: fold usb_generic_handle_packet into usb_handle_packet Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 17/28] usb: USBPacket: add status, rename owner -> ep Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 18/28] usb: add USBEndpoint->{nr,pid} Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 19/28] usb: Set USBEndpoint in usb_packet_setup() Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 20/28] usb: maintain async packet list per endpoint Gerd Hoffmann
2012-02-10 11:43 ` Gerd Hoffmann [this message]
2012-02-10 11:43 ` [Qemu-devel] [PATCH 22/28] usb: add USBBusOps->wakeup_endpoint Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 23/28] xhci: signal low- and fullspeed support Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 24/28] xhci: add trb type name lookup support Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 25/28] xhci: stop on errors Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 26/28] xhci: kill port arg from xhci_setup_packet Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 27/28] xhci: remote wakeup support Gerd Hoffmann
2012-02-10 11:43 ` [Qemu-devel] [PATCH 28/28] xhci: handle USB_RET_NAK Gerd Hoffmann
2012-02-16  0:32 ` [Qemu-devel] [PULL 00/28] usb patch queue Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1328874204-20920-22-git-send-email-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).