From: David Gibson <david@gibson.dropbear.id.au>
To: qemu-devel@nongnu.org
Cc: eduard.munteanu@linux360.ro, rth@twiddle.net,
David Gibson <david@gibson.dropbear.id.au>,
mst@redhat.com
Subject: [Qemu-devel] [PATCH 09/13] usb: Convert usb_packet_{map, unmap} to universal DMA helpers
Date: Thu, 1 Mar 2012 16:36:05 +1100 [thread overview]
Message-ID: <1330580169-15446-10-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1330580169-15446-1-git-send-email-david@gibson.dropbear.id.au>
The USB UHCI and EHCI drivers were converted some time ago to use the
pci_dma_*() helper functions. However, this conversion was not complete
because in some places both these drivers do DMA via the usb_packet_map()
function in usb-libhw.c. That function directly used
cpu_physical_memory_map().
Now that the sglist code uses DMA wrappers properly, we can convert the
functions in usb-libhw.c, thus conpleting the conversion of UHCI and EHCI
to use the DMA wrappers.
Note that usb_packet_map() invokes dma_memory_map() with a NULL invalidate
callback function. When IOMMU support is added, this will mean that
usb_packet_map() and the corresponding usb_packet_unmap() must be called in
close proximity without dropping the qemu device lock - otherwise the guest
might invalidate IOMMU mappings while they are still in use by the device
code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
hw/usb-ehci.c | 4 ++--
hw/usb-libhw.c | 20 +++++++++++---------
hw/usb-uhci.c | 2 +-
hw/usb.h | 2 +-
4 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/hw/usb-ehci.c b/hw/usb-ehci.c
index afc8ccf..f7dd50e 100644
--- a/hw/usb-ehci.c
+++ b/hw/usb-ehci.c
@@ -1343,7 +1343,7 @@ err:
set_field(&q->qh.token, q->tbytes, QTD_TOKEN_TBYTES);
}
ehci_finish_transfer(q, q->usb_status);
- usb_packet_unmap(&q->packet);
+ usb_packet_unmap(&q->packet, &q->sgl);
q->qh.token ^= QTD_TOKEN_DTOGGLE;
q->qh.token &= ~QTD_TOKEN_ACTIVE;
@@ -1464,7 +1464,7 @@ static int ehci_process_itd(EHCIState *ehci,
usb_packet_map(&ehci->ipacket, &ehci->isgl);
ret = usb_handle_packet(dev, &ehci->ipacket);
assert(ret != USB_RET_ASYNC);
- usb_packet_unmap(&ehci->ipacket);
+ usb_packet_unmap(&ehci->ipacket, &ehci->isgl);
} else {
DPRINTF("ISOCH: attempt to addess non-iso endpoint\n");
ret = USB_RET_NAK;
diff --git a/hw/usb-libhw.c b/hw/usb-libhw.c
index 162b42b..88282de 100644
--- a/hw/usb-libhw.c
+++ b/hw/usb-libhw.c
@@ -26,15 +26,16 @@
int usb_packet_map(USBPacket *p, QEMUSGList *sgl)
{
- int is_write = (p->pid == USB_TOKEN_IN);
+ DMADirection dir = (p->pid == USB_TOKEN_IN) ?
+ DMA_DIRECTION_FROM_DEVICE : DMA_DIRECTION_TO_DEVICE;
target_phys_addr_t len;
void *mem;
int i;
for (i = 0; i < sgl->nsg; i++) {
len = sgl->sg[i].len;
- mem = cpu_physical_memory_map(sgl->sg[i].base, &len,
- is_write);
+ mem = dma_memory_map(sgl->dma, NULL, NULL,
+ sgl->sg[i].base, &len, dir);
if (!mem) {
goto err;
}
@@ -46,18 +47,19 @@ int usb_packet_map(USBPacket *p, QEMUSGList *sgl)
return 0;
err:
- usb_packet_unmap(p);
+ usb_packet_unmap(p, sgl);
return -1;
}
-void usb_packet_unmap(USBPacket *p)
+void usb_packet_unmap(USBPacket *p, QEMUSGList *sgl)
{
- int is_write = (p->pid == USB_TOKEN_IN);
+ DMADirection dir = (p->pid == USB_TOKEN_IN) ?
+ DMA_DIRECTION_FROM_DEVICE : DMA_DIRECTION_TO_DEVICE;
int i;
for (i = 0; i < p->iov.niov; i++) {
- cpu_physical_memory_unmap(p->iov.iov[i].iov_base,
- p->iov.iov[i].iov_len, is_write,
- p->iov.iov[i].iov_len);
+ dma_memory_unmap(sgl->dma, p->iov.iov[i].iov_base,
+ p->iov.iov[i].iov_len, dir,
+ p->iov.iov[i].iov_len);
}
}
diff --git a/hw/usb-uhci.c b/hw/usb-uhci.c
index 70e3881..a7d2dbc 100644
--- a/hw/usb-uhci.c
+++ b/hw/usb-uhci.c
@@ -863,7 +863,7 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *in
done:
len = uhci_complete_td(s, td, async, int_mask);
- usb_packet_unmap(&async->packet);
+ usb_packet_unmap(&async->packet, &async->sgl);
uhci_async_free(async);
return len;
}
diff --git a/hw/usb.h b/hw/usb.h
index 8e83697..720a045 100644
--- a/hw/usb.h
+++ b/hw/usb.h
@@ -336,7 +336,7 @@ void usb_packet_set_state(USBPacket *p, USBPacketState state);
void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep);
void usb_packet_addbuf(USBPacket *p, void *ptr, size_t len);
int usb_packet_map(USBPacket *p, QEMUSGList *sgl);
-void usb_packet_unmap(USBPacket *p);
+void usb_packet_unmap(USBPacket *p, QEMUSGList *sgl);
void usb_packet_copy(USBPacket *p, void *ptr, size_t bytes);
void usb_packet_skip(USBPacket *p, size_t bytes);
void usb_packet_cleanup(USBPacket *p);
--
1.7.9
next prev parent reply other threads:[~2012-03-01 5:37 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-01 5:35 [Qemu-devel] [0/13] RFC: Support for guest-visible IOMMUs David Gibson
2012-03-01 5:35 ` [Qemu-devel] [PATCH 01/13] Use DMADirection type for dma_bdrv_io David Gibson
2012-03-01 5:35 ` [Qemu-devel] [PATCH 02/13] Better support for dma_addr_t variables David Gibson
2012-03-01 5:35 ` [Qemu-devel] [PATCH 03/13] usb-xhci: Use PCI DMA helper functions David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 04/13] Implement cpu_physical_memory_zero() David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 05/13] iommu: Add universal DMA helper functions David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 06/13] usb-ohci: Use " David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 07/13] iommu: Make sglists and dma_bdrv helpers use new universal DMA helpers David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 08/13] ide/ahci: Use universal DMA helper functions David Gibson
2012-03-01 5:36 ` David Gibson [this message]
2012-03-01 5:36 ` [Qemu-devel] [PATCH 10/13] iommu: Introduce IOMMU emulation infrastructure David Gibson
2012-03-01 15:49 ` Michael S. Tsirkin
2012-03-02 3:09 ` David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 11/13] pseries: Convert sPAPR TCEs to use generic IOMMU infrastructure David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 12/13] iommu: Allow PCI to use " David Gibson
2012-03-01 5:36 ` [Qemu-devel] [PATCH 13/13] pseries: Implement IOMMU and DMA for PAPR PCI devices David Gibson
-- strict thread matches above, loose matches on Subject: below --
2012-03-09 5:01 [Qemu-devel] [0/13] Implement support for guest visible IOMMUs David Gibson
2012-03-09 5:01 ` [Qemu-devel] [PATCH 09/13] usb: Convert usb_packet_{map, unmap} to universal DMA helpers David Gibson
2012-03-22 2:14 [Qemu-devel] [0/13] RFC: Guest visible IOMMU David Gibson
2012-03-22 2:14 ` [Qemu-devel] [PATCH 09/13] usb: Convert usb_packet_{map, unmap} to universal DMA helpers David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330580169-15446-10-git-send-email-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=eduard.munteanu@linux360.ro \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).