qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Gerd Hoffmann <kraxel@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 03/13] usb-ehci: split our qh queue into async and periodic queues
Date: Fri,  2 Mar 2012 19:32:24 +0100	[thread overview]
Message-ID: <1330713154-3229-4-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1330713154-3229-1-git-send-email-hdegoede@redhat.com>

qhs can be part of both the async and the periodic schedule, as is shown
in later patches in this series it is useful to keep track of the qhs on
a per schedule basis.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 hw/usb-ehci.c |   62 ++++++++++++++++++++++++++++++++++-----------------------
 1 files changed, 37 insertions(+), 25 deletions(-)

diff --git a/hw/usb-ehci.c b/hw/usb-ehci.c
index d41b80e..840022d 100644
--- a/hw/usb-ehci.c
+++ b/hw/usb-ehci.c
@@ -347,7 +347,6 @@ enum async_state {
 struct EHCIQueue {
     EHCIState *ehci;
     QTAILQ_ENTRY(EHCIQueue) next;
-    bool async_schedule;
     uint32_t seen;
     uint64_t ts;
 
@@ -367,6 +366,8 @@ struct EHCIQueue {
     int usb_status;
 };
 
+typedef QTAILQ_HEAD(EHCIQueueHead, EHCIQueue) EHCIQueueHead;
+
 struct EHCIState {
     PCIDevice dev;
     USBBus bus;
@@ -410,7 +411,8 @@ struct EHCIState {
     USBPort ports[NB_PORTS];
     USBPort *companion_ports[NB_PORTS];
     uint32_t usbsts_pending;
-    QTAILQ_HEAD(, EHCIQueue) queues;
+    EHCIQueueHead aqueues;
+    EHCIQueueHead pqueues;
 
     uint32_t a_fetch_addr;   // which address to look at next
     uint32_t p_fetch_addr;   // which address to look at next
@@ -660,31 +662,34 @@ static void ehci_trace_sitd(EHCIState *s, target_phys_addr_t addr,
 
 static EHCIQueue *ehci_alloc_queue(EHCIState *ehci, int async)
 {
+    EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
     EHCIQueue *q;
 
     q = g_malloc0(sizeof(*q));
     q->ehci = ehci;
-    q->async_schedule = async;
-    QTAILQ_INSERT_HEAD(&ehci->queues, q, next);
+    QTAILQ_INSERT_HEAD(head, q, next);
     trace_usb_ehci_queue_action(q, "alloc");
     return q;
 }
 
-static void ehci_free_queue(EHCIQueue *q)
+static void ehci_free_queue(EHCIQueue *q, int async)
 {
+    EHCIQueueHead *head = async ? &q->ehci->aqueues : &q->ehci->pqueues;
     trace_usb_ehci_queue_action(q, "free");
     if (q->async == EHCI_ASYNC_INFLIGHT) {
         usb_cancel_packet(&q->packet);
     }
-    QTAILQ_REMOVE(&q->ehci->queues, q, next);
+    QTAILQ_REMOVE(head, q, next);
     g_free(q);
 }
 
-static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint32_t addr)
+static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint32_t addr,
+                                        int async)
 {
+    EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
     EHCIQueue *q;
 
-    QTAILQ_FOREACH(q, &ehci->queues, next) {
+    QTAILQ_FOREACH(q, head, next) {
         if (addr == q->qhaddr) {
             return q;
         }
@@ -692,11 +697,12 @@ static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint32_t addr)
     return NULL;
 }
 
-static void ehci_queues_rip_unused(EHCIState *ehci)
+static void ehci_queues_rip_unused(EHCIState *ehci, int async)
 {
+    EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
     EHCIQueue *q, *tmp;
 
-    QTAILQ_FOREACH_SAFE(q, &ehci->queues, next, tmp) {
+    QTAILQ_FOREACH_SAFE(q, head, next, tmp) {
         if (q->seen) {
             q->seen = 0;
             q->ts = ehci->last_run_ns;
@@ -706,29 +712,31 @@ static void ehci_queues_rip_unused(EHCIState *ehci)
             /* allow 0.25 sec idle */
             continue;
         }
-        ehci_free_queue(q);
+        ehci_free_queue(q, async);
     }
 }
 
-static void ehci_queues_rip_device(EHCIState *ehci, USBDevice *dev)
+static void ehci_queues_rip_device(EHCIState *ehci, USBDevice *dev, int async)
 {
+    EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
     EHCIQueue *q, *tmp;
 
-    QTAILQ_FOREACH_SAFE(q, &ehci->queues, next, tmp) {
+    QTAILQ_FOREACH_SAFE(q, head, next, tmp) {
         if (!usb_packet_is_inflight(&q->packet) ||
             q->packet.ep->dev != dev) {
             continue;
         }
-        ehci_free_queue(q);
+        ehci_free_queue(q, async);
     }
 }
 
-static void ehci_queues_rip_all(EHCIState *ehci)
+static void ehci_queues_rip_all(EHCIState *ehci, int async)
 {
+    EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
     EHCIQueue *q, *tmp;
 
-    QTAILQ_FOREACH_SAFE(q, &ehci->queues, next, tmp) {
-        ehci_free_queue(q);
+    QTAILQ_FOREACH_SAFE(q, head, next, tmp) {
+        ehci_free_queue(q, async);
     }
 }
 
@@ -773,7 +781,8 @@ static void ehci_detach(USBPort *port)
         return;
     }
 
-    ehci_queues_rip_device(s, port->dev);
+    ehci_queues_rip_device(s, port->dev, 0);
+    ehci_queues_rip_device(s, port->dev, 1);
 
     *portsc &= ~(PORTSC_CONNECT|PORTSC_PED);
     *portsc |= PORTSC_CSC;
@@ -793,7 +802,8 @@ static void ehci_child_detach(USBPort *port, USBDevice *child)
         return;
     }
 
-    ehci_queues_rip_device(s, child);
+    ehci_queues_rip_device(s, child, 0);
+    ehci_queues_rip_device(s, child, 1);
 }
 
 static void ehci_wakeup(USBPort *port)
@@ -911,7 +921,8 @@ static void ehci_reset(void *opaque)
             usb_device_reset(devs[i]);
         }
     }
-    ehci_queues_rip_all(s);
+    ehci_queues_rip_all(s, 0);
+    ehci_queues_rip_all(s, 1);
     qemu_del_timer(s->frame_timer);
 }
 
@@ -1526,7 +1537,7 @@ static int ehci_state_waitlisthead(EHCIState *ehci,  int async)
         ehci_set_usbsts(ehci, USBSTS_REC);
     }
 
-    ehci_queues_rip_unused(ehci);
+    ehci_queues_rip_unused(ehci, async);
 
     /*  Find the head of the list (4.9.1.1) */
     for(i = 0; i < MAX_QH; i++) {
@@ -1613,7 +1624,7 @@ static EHCIQueue *ehci_state_fetchqh(EHCIState *ehci, int async)
     int reload;
 
     entry = ehci_get_fetch_addr(ehci, async);
-    q = ehci_find_queue_by_qh(ehci, entry);
+    q = ehci_find_queue_by_qh(ehci, entry, async);
     if (NULL == q) {
         q = ehci_alloc_queue(ehci, async);
     }
@@ -2064,7 +2075,7 @@ static void ehci_advance_state(EHCIState *ehci,
 
 static void ehci_advance_async_state(EHCIState *ehci)
 {
-    int async = 1;
+    const int async = 1;
 
     switch(ehci_get_state(ehci, async)) {
     case EST_INACTIVE:
@@ -2121,7 +2132,7 @@ static void ehci_advance_periodic_state(EHCIState *ehci)
 {
     uint32_t entry;
     uint32_t list;
-    int async = 0;
+    const int async = 0;
 
     // 4.6
 
@@ -2354,7 +2365,8 @@ static int usb_ehci_initfn(PCIDevice *dev)
     }
 
     s->frame_timer = qemu_new_timer_ns(vm_clock, ehci_frame_timer, s);
-    QTAILQ_INIT(&s->queues);
+    QTAILQ_INIT(&s->aqueues);
+    QTAILQ_INIT(&s->pqueues);
 
     qemu_register_reset(ehci_reset, s);
 
-- 
1.7.7.6

  parent reply	other threads:[~2012-03-02 18:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-02 18:32 [Qemu-devel] [PATCH 0/13] usb patches Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 01/13] usb-redir: Set ep type and interface Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 02/13] usb-ehci: Never follow table entries with the T-bit set Hans de Goede
2012-03-02 18:32 ` Hans de Goede [this message]
2012-03-02 18:32 ` [Qemu-devel] [PATCH 04/13] usb-ehci: always call ehci_queues_rip_unused for period queues Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 05/13] usb-ehci: Drop cached qhs when the doorbell gets rung Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 06/13] usb-ehci: Rip the queues when the async or period schedule is halted Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 07/13] usb-ehci: Any packet completion except for NAK should set the interrupt Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 08/13] usb-ehci: Fix cerr tracking Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 09/13] usb-ehci: Remove dead nakcnt code Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 10/13] usb-ehci: Fix and simplify nakcnt handling Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 11/13] usb-ehci: Cleanup itd error handling Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 12/13] usb: return BABBLE rather then NAK when we receive too much data Hans de Goede
2012-03-02 18:32 ` [Qemu-devel] [PATCH 13/13] usb: add USB_RET_IOERROR Hans de Goede
  -- strict thread matches above, loose matches on Subject: below --
2012-03-02 20:27 [Qemu-devel] usb patches [v2] Hans de Goede
2012-03-02 20:27 ` [Qemu-devel] [PATCH 03/13] usb-ehci: split our qh queue into async and periodic queues Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1330713154-3229-4-git-send-email-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).