From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: Paul Brook <paul@codesourcery.com>,
Evgeny Voevodin <e.voevodin@samsung.com>,
patches@linaro.org
Subject: [Qemu-devel] [PATCH 05/13] hw/a15mpcore: switch to using sysbus GIC
Date: Wed, 4 Apr 2012 16:30:54 +0100 [thread overview]
Message-ID: <1333553462-12633-6-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1333553462-12633-1-git-send-email-peter.maydell@linaro.org>
Switch the a15mpcore private peripheral region to using
the standalone sysbus GIC device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/a15mpcore.c | 35 ++++++++++++++++++++++++++---------
1 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/hw/a15mpcore.c b/hw/a15mpcore.c
index 54c0dbf..5a7b365 100644
--- a/hw/a15mpcore.c
+++ b/hw/a15mpcore.c
@@ -20,23 +20,38 @@
#include "sysbus.h"
-#define LEGACY_INCLUDED_GIC
-#include "arm_gic.c"
-
/* A15MP private memory region. */
typedef struct A15MPPrivState {
- gic_state gic;
+ SysBusDevice busdev;
uint32_t num_cpu;
uint32_t num_irq;
MemoryRegion container;
+ DeviceState *gic;
} A15MPPrivState;
+static void a15mp_priv_set_irq(void *opaque, int irq, int level)
+{
+ A15MPPrivState *s = (A15MPPrivState *)opaque;
+ qemu_set_irq(qdev_get_gpio_in(s->gic, irq), level);
+}
+
static int a15mp_priv_init(SysBusDevice *dev)
{
- A15MPPrivState *s = FROM_SYSBUSGIC(A15MPPrivState, dev);
+ A15MPPrivState *s = FROM_SYSBUS(A15MPPrivState, dev);
+ SysBusDevice *busdev;
+
+ s->gic = qdev_create(NULL, "arm_gic");
+ qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
+ qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
+ qdev_init_nofail(s->gic);
+ busdev = sysbus_from_qdev(s->gic);
+
+ /* Pass through outbound IRQ lines from the GIC */
+ sysbus_pass_irq(dev, busdev);
- gic_init(&s->gic, s->num_cpu, s->num_irq);
+ /* Pass through inbound GPIO lines to the GIC */
+ qdev_init_gpio_in(&s->busdev.qdev, a15mp_priv_set_irq, s->num_irq - 32);
/* Memory map (addresses are offsets from PERIPHBASE):
* 0x0000-0x0fff -- reserved
@@ -47,8 +62,10 @@ static int a15mp_priv_init(SysBusDevice *dev)
* 0x6000-0x7fff -- GIC virtual CPU interface (not modelled)
*/
memory_region_init(&s->container, "a15mp-priv-container", 0x8000);
- memory_region_add_subregion(&s->container, 0x1000, &s->gic.iomem);
- memory_region_add_subregion(&s->container, 0x2000, &s->gic.cpuiomem[0]);
+ memory_region_add_subregion(&s->container, 0x1000,
+ sysbus_mmio_get_region(busdev, 0));
+ memory_region_add_subregion(&s->container, 0x2000,
+ sysbus_mmio_get_region(busdev, 1));
sysbus_init_mmio(dev, &s->container);
return 0;
@@ -72,7 +89,7 @@ static void a15mp_priv_class_init(ObjectClass *klass, void *data)
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = a15mp_priv_init;
dc->props = a15mp_priv_properties;
- /* We currently have no savable state outside the common GIC state */
+ /* We currently have no savable state */
}
static TypeInfo a15mp_priv_info = {
--
1.7.1
next prev parent reply other threads:[~2012-04-04 15:31 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-04 15:30 [Qemu-devel] [PATCH 00/13] Convert ARM GIC to sysbus device Peter Maydell
2012-04-04 15:30 ` [Qemu-devel] [PATCH 01/13] hw/arm_gic: Move NCPU definition to arm_gic.c Peter Maydell
2012-04-05 4:29 ` Evgeny Voevodin
2012-04-04 15:30 ` [Qemu-devel] [PATCH 02/13] hw/arm_gic: Move gic_get_current_cpu into arm_gic.c Peter Maydell
2012-04-05 4:29 ` Evgeny Voevodin
2012-04-04 15:30 ` [Qemu-devel] [PATCH 03/13] hw/arm_gic.c: Expose PPI inputs as gpio inputs Peter Maydell
2012-04-04 15:30 ` [Qemu-devel] [PATCH 04/13] arm_gic: Make the GIC its own sysbus device Peter Maydell
2012-04-05 4:30 ` Evgeny Voevodin
2012-04-04 15:30 ` Peter Maydell [this message]
2012-04-04 15:30 ` [Qemu-devel] [PATCH 06/13] hw/a9mpcore.c: Switch to using sysbus GIC Peter Maydell
2012-04-04 15:30 ` [Qemu-devel] [PATCH 07/13] hw/realview_gic: switch to " Peter Maydell
2012-04-04 15:30 ` [Qemu-devel] [PATCH 08/13] hw/exynos4210_gic.c: Convert to using " Peter Maydell
2012-04-05 4:30 ` Evgeny Voevodin
2012-04-04 15:30 ` [Qemu-devel] [PATCH 09/13] hw/arm11mpcore: Convert to using sysbus GIC device Peter Maydell
2012-04-04 15:30 ` [Qemu-devel] [PATCH 10/13] hw/arm_gic: Make gic_reset a sysbus reset function Peter Maydell
2012-04-04 15:31 ` [Qemu-devel] [PATCH 11/13] hw/arm_gic.c: Use NVIC instead of LEGACY_INCLUDED_GIC define Peter Maydell
2012-04-04 15:31 ` [Qemu-devel] [PATCH 12/13] hw/arm_gic.c: gic_set_pending_private() is NVIC only Peter Maydell
2012-04-04 15:31 ` [Qemu-devel] [PATCH 13/13] hw/arm_gic.c: Remove stray hardcoded tab Peter Maydell
2012-04-05 4:31 ` [Qemu-devel] [PATCH 00/13] Convert ARM GIC to sysbus device Evgeny Voevodin
2012-04-05 12:23 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333553462-12633-6-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=e.voevodin@samsung.com \
--cc=patches@linaro.org \
--cc=paul@codesourcery.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).