From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 22/46] Use DMADirection type for dma_bdrv_io
Date: Thu, 5 Apr 2012 17:52:00 +0200 [thread overview]
Message-ID: <1333641144-13612-23-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1333641144-13612-1-git-send-email-kwolf@redhat.com>
From: David Gibson <david@gibson.dropbear.id.au>
Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to
determine the direction of DMA it is emulating. We already have a
DMADirection enum designed specifically to encode DMA directions.
This patch uses it for dma_bdrv_io() as well. This involves removing
the DMADirection definition from the #ifdef it was inside, but since that
only existed to protect the definition of dma_addr_t from places where
config.h is not included, there wasn't any reason for it to be there in
the first place.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
dma-helpers.c | 20 ++++++++++++--------
dma.h | 12 ++++++------
hw/ide/core.c | 3 ++-
hw/ide/macio.c | 3 ++-
4 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/dma-helpers.c b/dma-helpers.c
index 7fcc86d..7971a89 100644
--- a/dma-helpers.c
+++ b/dma-helpers.c
@@ -41,7 +41,7 @@ typedef struct {
BlockDriverAIOCB *acb;
QEMUSGList *sg;
uint64_t sector_num;
- bool to_dev;
+ DMADirection dir;
bool in_cancel;
int sg_cur_index;
dma_addr_t sg_cur_byte;
@@ -75,7 +75,8 @@ static void dma_bdrv_unmap(DMAAIOCB *dbs)
for (i = 0; i < dbs->iov.niov; ++i) {
cpu_physical_memory_unmap(dbs->iov.iov[i].iov_base,
- dbs->iov.iov[i].iov_len, !dbs->to_dev,
+ dbs->iov.iov[i].iov_len,
+ dbs->dir != DMA_DIRECTION_TO_DEVICE,
dbs->iov.iov[i].iov_len);
}
qemu_iovec_reset(&dbs->iov);
@@ -122,7 +123,8 @@ static void dma_bdrv_cb(void *opaque, int ret)
while (dbs->sg_cur_index < dbs->sg->nsg) {
cur_addr = dbs->sg->sg[dbs->sg_cur_index].base + dbs->sg_cur_byte;
cur_len = dbs->sg->sg[dbs->sg_cur_index].len - dbs->sg_cur_byte;
- mem = cpu_physical_memory_map(cur_addr, &cur_len, !dbs->to_dev);
+ mem = cpu_physical_memory_map(cur_addr, &cur_len,
+ dbs->dir != DMA_DIRECTION_TO_DEVICE);
if (!mem)
break;
qemu_iovec_add(&dbs->iov, mem, cur_len);
@@ -169,11 +171,11 @@ static AIOPool dma_aio_pool = {
BlockDriverAIOCB *dma_bdrv_io(
BlockDriverState *bs, QEMUSGList *sg, uint64_t sector_num,
DMAIOFunc *io_func, BlockDriverCompletionFunc *cb,
- void *opaque, bool to_dev)
+ void *opaque, DMADirection dir)
{
DMAAIOCB *dbs = qemu_aio_get(&dma_aio_pool, bs, cb, opaque);
- trace_dma_bdrv_io(dbs, bs, sector_num, to_dev);
+ trace_dma_bdrv_io(dbs, bs, sector_num, (dir == DMA_DIRECTION_TO_DEVICE));
dbs->acb = NULL;
dbs->bs = bs;
@@ -181,7 +183,7 @@ BlockDriverAIOCB *dma_bdrv_io(
dbs->sector_num = sector_num;
dbs->sg_cur_index = 0;
dbs->sg_cur_byte = 0;
- dbs->to_dev = to_dev;
+ dbs->dir = dir;
dbs->io_func = io_func;
dbs->bh = NULL;
qemu_iovec_init(&dbs->iov, sg->nsg);
@@ -194,14 +196,16 @@ BlockDriverAIOCB *dma_bdrv_read(BlockDriverState *bs,
QEMUSGList *sg, uint64_t sector,
void (*cb)(void *opaque, int ret), void *opaque)
{
- return dma_bdrv_io(bs, sg, sector, bdrv_aio_readv, cb, opaque, false);
+ return dma_bdrv_io(bs, sg, sector, bdrv_aio_readv, cb, opaque,
+ DMA_DIRECTION_FROM_DEVICE);
}
BlockDriverAIOCB *dma_bdrv_write(BlockDriverState *bs,
QEMUSGList *sg, uint64_t sector,
void (*cb)(void *opaque, int ret), void *opaque)
{
- return dma_bdrv_io(bs, sg, sector, bdrv_aio_writev, cb, opaque, true);
+ return dma_bdrv_io(bs, sg, sector, bdrv_aio_writev, cb, opaque,
+ DMA_DIRECTION_TO_DEVICE);
}
diff --git a/dma.h b/dma.h
index 20e86d2..05ac325 100644
--- a/dma.h
+++ b/dma.h
@@ -17,6 +17,11 @@
typedef struct ScatterGatherEntry ScatterGatherEntry;
+typedef enum {
+ DMA_DIRECTION_TO_DEVICE = 0,
+ DMA_DIRECTION_FROM_DEVICE = 1,
+} DMADirection;
+
struct QEMUSGList {
ScatterGatherEntry *sg;
int nsg;
@@ -29,11 +34,6 @@ typedef target_phys_addr_t dma_addr_t;
#define DMA_ADDR_FMT TARGET_FMT_plx
-typedef enum {
- DMA_DIRECTION_TO_DEVICE = 0,
- DMA_DIRECTION_FROM_DEVICE = 1,
-} DMADirection;
-
struct ScatterGatherEntry {
dma_addr_t base;
dma_addr_t len;
@@ -51,7 +51,7 @@ typedef BlockDriverAIOCB *DMAIOFunc(BlockDriverState *bs, int64_t sector_num,
BlockDriverAIOCB *dma_bdrv_io(BlockDriverState *bs,
QEMUSGList *sg, uint64_t sector_num,
DMAIOFunc *io_func, BlockDriverCompletionFunc *cb,
- void *opaque, bool to_dev);
+ void *opaque, DMADirection dir);
BlockDriverAIOCB *dma_bdrv_read(BlockDriverState *bs,
QEMUSGList *sg, uint64_t sector,
BlockDriverCompletionFunc *cb, void *opaque);
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 6e25338..35723fd 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -618,7 +618,8 @@ void ide_dma_cb(void *opaque, int ret)
break;
case IDE_DMA_TRIM:
s->bus->dma->aiocb = dma_bdrv_io(s->bs, &s->sg, sector_num,
- ide_issue_trim, ide_dma_cb, s, true);
+ ide_issue_trim, ide_dma_cb, s,
+ DMA_DIRECTION_TO_DEVICE);
break;
}
return;
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index a4df244..7b38d9e 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -149,7 +149,8 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
break;
case IDE_DMA_TRIM:
m->aiocb = dma_bdrv_io(s->bs, &s->sg, sector_num,
- ide_issue_trim, pmac_ide_transfer_cb, s, true);
+ ide_issue_trim, pmac_ide_transfer_cb, s,
+ DMA_DIRECTION_TO_DEVICE);
break;
}
return;
--
1.7.6.5
next prev parent reply other threads:[~2012-04-05 15:49 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-05 15:51 [Qemu-devel] [PULL 00/46] Block patches Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 01/46] trace-events: Rename 'next' argument Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 02/46] tracetool: Forbid argument name 'next' Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 03/46] qcow2: Remove unused parameter in get_cluster_table() Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 04/46] qemu-io: add option to enable tracing Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 05/46] block: push recursive flushing up from drivers Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 07/46] ide: IDENTIFY word 86 bit 14 is reserved Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 08/46] ide: Add "model=s" qdev option Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 09/46] ide: Change serial number strncpy() to pstrcpy() Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 10/46] ide: Adds wwn=hex qdev option Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 11/46] block/vpc: write checksum back to footer after check Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 12/46] qerror: fix QERR_PROPERTY_VALUE_OUT_OF_RANGE description Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 13/46] qdev: add blocksize property type Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 14/46] block: enforce constraints on block size properties Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 15/46] vdi: basic conversion to coroutines Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 16/46] vdi: move end-of-I/O handling at the end Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 17/46] vdi: merge aio_read_cb and aio_write_cb into callers Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 18/46] vdi: move aiocb fields to locals Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 19/46] vdi: leave bounce buffering to block layer Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 20/46] vdi: do not create useless iovecs Kevin Wolf
2012-04-05 15:51 ` [Qemu-devel] [PATCH 21/46] vdi: change goto to loop Kevin Wolf
2012-04-05 15:52 ` Kevin Wolf [this message]
2012-04-05 15:52 ` [Qemu-devel] [PATCH 23/46] block: disable I/O throttling on sync api Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 25/46] block: fix streaming/closing race Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 27/46] block: document job API Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 28/46] qemu-img: add image fragmentation statistics Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 29/46] qed: " Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 30/46] qemu-img: add dirty flag status Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 31/46] qed: track " Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 32/46] block: bdrv_append() fixes Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 33/46] sheepdog: implement SD_OP_FLUSH_VDI operation Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 34/46] sheepdog: fix send req helpers Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 36/46] qemu-iotests: Test unknown qcow2 header extensions Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 37/46] qemu-iotests: Fix call syntax for qemu-img Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 38/46] qemu-iotests: Fix call syntax for qemu-io Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 40/46] block: Add new BDRV_O_INCOMING flag to notice incoming live migration Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 42/46] blockdev: open images with BDRV_O_INCOMING on " Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 43/46] qed: add bdrv_invalidate_cache to be called after " Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 44/46] migration: clear BDRV_O_INCOMING flags on end of " Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 45/46] qed: honor BDRV_O_INCOMING for " Kevin Wolf
2012-04-05 15:52 ` [Qemu-devel] [PATCH 46/46] qed: remove incoming live migration blocker Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333641144-13612-23-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).