[Qemu-devel] [PATCH 04/14] scsi: fix WRITE SAME transfer length and direction

[Paolo Bonzini <pbonzini@redhat.com>]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi-bus.c  |   14 ++++++++------
 hw/scsi-disk.c |    5 ++++-
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index c29a4ae..5640aae 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -791,7 +791,8 @@ static int scsi_req_length(SCSICommand *cmd, SCSIDevice *dev, uint8_t *buf)
     case MODE_SENSE:
         break;
     case WRITE_SAME_10:
-        cmd->xfer = 1;
+    case WRITE_SAME_16:
+        cmd->xfer = dev->blocksize;
         break;
     case READ_CAPACITY_10:
         cmd->xfer = 8;
@@ -909,6 +910,10 @@ static int scsi_req_stream_length(SCSICommand *cmd, SCSIDevice *dev, uint8_t *bu
 
 static void scsi_cmd_xfer_mode(SCSICommand *cmd)
 {
+    if (!cmd->xfer) {
+        cmd->mode = SCSI_XFER_NONE;
+        return;
+    }
     switch (cmd->buf[0]) {
     case WRITE_6:
     case WRITE_10:
@@ -934,6 +939,7 @@ static void scsi_cmd_xfer_mode(SCSICommand *cmd)
     case UPDATE_BLOCK:
     case WRITE_LONG_10:
     case WRITE_SAME_10:
+    case WRITE_SAME_16:
     case SEARCH_HIGH_12:
     case SEARCH_EQUAL_12:
     case SEARCH_LOW_12:
@@ -946,11 +952,7 @@ static void scsi_cmd_xfer_mode(SCSICommand *cmd)
         cmd->mode = SCSI_XFER_TO_DEV;
         break;
     default:
-        if (cmd->xfer)
-            cmd->mode = SCSI_XFER_FROM_DEV;
-        else {
-            cmd->mode = SCSI_XFER_NONE;
-        }
+        cmd->mode = SCSI_XFER_FROM_DEV;
         break;
     }
 }
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index eca00a6..fbb1041 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1566,8 +1566,11 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
         }
         break;
     case WRITE_SAME_10:
+        len = lduw_be_p(&buf[7]);
+        goto write_same;
     case WRITE_SAME_16:
-        len = r->req.cmd.xfer / s->qdev.blocksize;
+        len = ldl_be_p(&buf[10]) & 0xffffffffULL;
+    write_same:
 
         DPRINTF("WRITE SAME() (sector %" PRId64 ", count %d)\n",
                 r->req.cmd.lba, len);
-- 
1.7.9.3