[Qemu-devel] [PATCH 08/14] scsi: do not report bogus overruns for commands in the 0x00-0x1F range

[Paolo Bonzini <pbonzini@redhat.com>]

Interpreting cdb[4] == 0 as a request to transfer 256 blocks is only
needed for READ_6 and WRITE_6.  No other command in that range needs
that special-casing, and the resulting overrun breaks scsi-testsuite's
attempt to use command 2 as a known-invalid command.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi-bus.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 08d5088..5fbf8db 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -735,10 +735,6 @@ static int scsi_req_length(SCSICommand *cmd, SCSIDevice *dev, uint8_t *buf)
     case 0:
         cmd->xfer = buf[4];
         cmd->len = 6;
-        /* length 0 means 256 blocks */
-        if (cmd->xfer == 0) {
-            cmd->xfer = 256;
-        }
         break;
     case 1:
     case 2:
@@ -808,18 +804,26 @@ static int scsi_req_length(SCSICommand *cmd, SCSIDevice *dev, uint8_t *buf)
             cmd->xfer = buf[9] | (buf[8] << 8);
         }
         break;
+    case WRITE_6:
+        /* length 0 means 256 blocks */
+        if (cmd->xfer == 0) {
+            cmd->xfer = 256;
+        }
     case WRITE_10:
     case WRITE_VERIFY_10:
-    case WRITE_6:
     case WRITE_12:
     case WRITE_VERIFY_12:
     case WRITE_16:
     case WRITE_VERIFY_16:
         cmd->xfer *= dev->blocksize;
         break;
-    case READ_10:
     case READ_6:
     case READ_REVERSE:
+        /* length 0 means 256 blocks */
+        if (cmd->xfer == 0) {
+            cmd->xfer = 256;
+        }
+    case READ_10:
     case RECOVER_BUFFERED_DATA:
     case READ_12:
     case READ_16:
-- 
1.7.9.3