From: "Andreas Färber" <afaerber@suse.de>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, agraf@suse.de, anthony@codemonkey.ws,
"Andreas Färber" <afaerber@suse.de>
Subject: [Qemu-devel] [PATCH v3 for-1.1-rc1 4/4] tcg/ppc: Fix CONFIG_TCG_PASS_AREG0 mode
Date: Wed, 9 May 2012 19:26:59 +0200 [thread overview]
Message-ID: <1336584419-4428-5-git-send-email-afaerber@suse.de> (raw)
In-Reply-To: <1336584419-4428-1-git-send-email-afaerber@suse.de>
Adjust the tcg_out_qemu_{ld,st}() slow paths to pass AREG0 in r3,
based on patches by malc.
Also adjust the registers clobbered, based on patch by Alex.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
[AF: Do not hardcode r3 for AREG0, requested by Alex]
---
tcg/ppc/tcg-target.c | 33 ++++++++++++++++++++++++++++++++-
1 files changed, 32 insertions(+), 1 deletions(-)
diff --git a/tcg/ppc/tcg-target.c b/tcg/ppc/tcg-target.c
index 20888e2..4cde48d 100644
--- a/tcg/ppc/tcg-target.c
+++ b/tcg/ppc/tcg-target.c
@@ -244,9 +244,19 @@ static int target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
tcg_regset_set32(ct->u.regs, 0, 0xffffffff);
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R3);
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R4);
+#ifdef CONFIG_TCG_PASS_AREG0
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
+#if TARGET_LONG_BITS == 64
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
+#ifdef TCG_TARGET_CALL_ALIGN_ARGS
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R7);
+#endif
+#endif
+#else /* !AREG0 */
#if TARGET_LONG_BITS == 64
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
#endif
+#endif
break;
case 'K': /* qemu_st[8..32] constraint */
ct->ct |= TCG_CT_REG;
@@ -254,9 +264,19 @@ static int target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R3);
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R4);
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
+#ifdef CONFIG_TCG_PASS_AREG0
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
+#if TARGET_LONG_BITS == 64
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R7);
+#ifdef TCG_TARGET_CALL_ALIGN_ARGS
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R8);
+#endif
+#endif
+#else /* !AREG0 */
#if TARGET_LONG_BITS == 64
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
#endif
+#endif
break;
case 'M': /* qemu_st64 constraint */
ct->ct |= TCG_CT_REG;
@@ -266,6 +286,12 @@ static int target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
tcg_regset_reset_reg(ct->u.regs, TCG_REG_R7);
+#if defined(CONFIG_TCG_PASS_AREG0)
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R8);
+#ifdef TCG_TARGET_CALL_ALIGN_ARGS
+ tcg_regset_reset_reg(ct->u.regs, TCG_REG_R9);
+#endif
+#endif
break;
#else
case 'L':
@@ -512,7 +538,6 @@ static void tcg_out_call (TCGContext *s, tcg_target_long arg, int const_arg)
#include "../../softmmu_defs.h"
#ifdef CONFIG_TCG_PASS_AREG0
-#error CONFIG_TCG_PASS_AREG0 is not supported
/* helper signature: helper_ld_mmu(CPUState *env, target_ulong addr,
int mmu_idx) */
static const void * const qemu_ld_helpers[4] = {
@@ -618,6 +643,9 @@ static void tcg_out_qemu_ld (TCGContext *s, const TCGArg *args, int opc)
/* slow path */
ir = 3;
+#ifdef CONFIG_TCG_PASS_AREG0
+ tcg_out_mov (s, TCG_TYPE_I32, ir++, TCG_AREG0);
+#endif
#if TARGET_LONG_BITS == 32
tcg_out_mov (s, TCG_TYPE_I32, ir++, addr_reg);
#else
@@ -817,6 +845,9 @@ static void tcg_out_qemu_st (TCGContext *s, const TCGArg *args, int opc)
/* slow path */
ir = 3;
+#ifdef CONFIG_TCG_PASS_AREG0
+ tcg_out_mov (s, TCG_TYPE_I32, ir++, TCG_AREG0);
+#endif
#if TARGET_LONG_BITS == 32
tcg_out_mov (s, TCG_TYPE_I32, ir++, addr_reg);
#else
--
1.7.7
next prev parent reply other threads:[~2012-05-09 17:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-09 17:26 [Qemu-devel] [PATCH v3 for-1.1-rc1 0/4] tcg/ppc: AREG0 support and Darwin fixes Andreas Färber
2012-05-09 17:26 ` [Qemu-devel] [PATCH v3 for-1.1-rc1 1/4] tcg/ppc: Do not overwrite lower address word on Darwin and AIX Andreas Färber
2012-05-09 17:26 ` [Qemu-devel] [PATCH v3 for-1.1-rc1 2/4] tcg/ppc: Don't hardcode register numbers Andreas Färber
2012-05-09 17:26 ` [Qemu-devel] [PATCH v3 for-1.1-rc1 3/4] tcg/ppc: Clobber r5 for 64-bit qemu_ld Andreas Färber
2012-05-09 17:26 ` Andreas Färber [this message]
2012-05-09 17:53 ` [Qemu-devel] [PATCH v3 for-1.1-rc1 4/4] tcg/ppc: Fix CONFIG_TCG_PASS_AREG0 mode malc
2012-05-09 18:03 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336584419-4428-5-git-send-email-afaerber@suse.de \
--to=afaerber@suse.de \
--cc=agraf@suse.de \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).