From: Max Filippov <jcmvbkbc@gmail.com>
To: qemu-devel@nongnu.org
Cc: Blue Swirl <blauwirbel@gmail.com>,
Max Filippov <jcmvbkbc@gmail.com>,
Anthony Liguori <aliguori@us.ibm.com>
Subject: [Qemu-devel] [PATCH 1.1 6/6] target-xtensa: add MMU pagewalking tests
Date: Sun, 27 May 2012 18:34:54 +0400 [thread overview]
Message-ID: <1338129294-16742-7-git-send-email-jcmvbkbc@gmail.com> (raw)
In-Reply-To: <1338129294-16742-1-git-send-email-jcmvbkbc@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
---
tests/tcg/xtensa/test_mmu.S | 221 ++++++++++++++++++++++++++++++++++++++++---
1 files changed, 207 insertions(+), 14 deletions(-)
diff --git a/tests/tcg/xtensa/test_mmu.S b/tests/tcg/xtensa/test_mmu.S
index 52d5774..5d87fbb 100644
--- a/tests/tcg/xtensa/test_mmu.S
+++ b/tests/tcg/xtensa/test_mmu.S
@@ -293,26 +293,219 @@ test store_prohibited
assert eq, a2, a3
test_end
-test dtlb_autoload
- set_vector kernel, 0
-
- movi a2, 0xd4000000
+/* Set up page table entry vaddr->paddr, ring=pte_ring, attr=pte_attr
+ * and DTLB way 7 to cover this PTE, ring=pt_ring, attr=pt_attr
+ */
+.macro pt_setup pt_ring, pt_attr, pte_ring, vaddr, paddr, pte_attr
+ movi a2, 0x80000000
wsr a2, ptevaddr
- movi a3, 0x00001013
- s32i a3, a2, 4
+
+ movi a3, 0x80000007 | (((\vaddr) >> 10) & 0xfffff000) /* way 7 */
+ movi a4, 0x04000003 | ((\pt_ring) << 4) /* PADDR 64M */
+ wdtlb a4, a3
+ isync
+
+ movi a3, ((\paddr) & 0xfffff000) | ((\pte_ring) << 4) | (\pte_attr)
+ movi a1, ((\vaddr) >> 12) << 2
+ add a2, a1, a2
+ s32i a3, a2, 0
+
+ movi a3, 0x80000007 | (((\vaddr) >> 10) & 0xfffff000) /* way 7 */
+ movi a4, 0x04000000 | ((\pt_ring) << 4) | (\pt_attr) /* PADDR 64M */
+ wdtlb a4, a3
+ isync
+
+ movi a3, (\vaddr)
+.endm
+
+/* out: PS.RING=ring, PS.EXCM=excm, a3=vaddr */
+.macro go_ring ring, excm, vaddr
+ movi a3, 10f
+ pitlb a3, a3
+ ritlb1 a2, a3
+ movi a1, 0x10
+ or a2, a2, a1
+ movi a1, 0x000ff000
+ and a3, a3, a1
+ movi a1, 4
+ or a3, a3, a1
+ witlb a2, a3
+ movi a3, 10f
+ movi a1, 0x000fffff
+ and a1, a3, a1
+
+ movi a2, 0
+ wsr a2, excvaddr
+
+ movi a3, \vaddr
+ movi a2, 0x4000f | ((\ring) << 6) | ((\excm) << 4)
+ jx a1
+10:
+ wsr a2, ps
+ isync
+.endm
+
+/* in: a3 -- virtual address to test */
+.macro assert_auto_tlb
+ movi a2, 0x4000f
+ wsr a2, ps
+ isync
+ pdtlb a2, a3
+ movi a1, 0xfffff01f
+ and a2, a2, a1
+ movi a1, 0xfffff000
+ and a1, a1, a3
+ xor a1, a1, a2
+ assert gei, a1, 0x10
+ movi a2, 0x14
+ assert lt, a1, a2
+.endm
+
+/* in: a3 -- virtual address to test */
+.macro assert_no_auto_tlb
+ movi a2, 0x4000f
+ wsr a2, ps
+ isync
pdtlb a2, a3
movi a1, 0x10
and a1, a1, a2
assert eqi, a1, 0
- l8ui a1, a3, 0
- pdtlb a2, a3
- movi a1, 0xfffff010
- and a1, a1, a2
- movi a3, 0x00001010
- assert eq, a1, a3
- movi a1, 0xf
+.endm
+
+.macro assert_sr sr, v
+ rsr a2, \sr
+ movi a1, (\v)
+ assert eq, a1, a2
+.endm
+
+.macro assert_epc1_1m vaddr
+ movi a2, (\vaddr)
+ movi a1, 0xfffff
and a1, a1, a2
- assert lti, a1, 4
+ rsr a2, epc1
+ assert eq, a1, a2
+.endm
+
+test dtlb_autoload
+ set_vector kernel, 0
+
+ pt_setup 0, 3, 1, 0x1000, 0x1000, 3
+ assert_no_auto_tlb
+
+ l8ui a1, a3, 0
+
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+test_end
+
+test autoload_load_store_privilege
+ set_vector kernel, 0
+ set_vector double, 2f
+
+ pt_setup 0, 3, 0, 0x2000, 0x2000, 3
+ movi a3, 0x2004
+ assert_no_auto_tlb
+
+ movi a2, 0x4005f /* ring 1 + excm => cring == 0 */
+ wsr a2, ps
+ isync
+1:
+ l32e a2, a3, -4 /* ring used */
+ test_fail
+2:
+ rsr a2, excvaddr
+ addi a1, a3, -4
+ assert eq, a1, a2
+
+ assert_auto_tlb
+ assert_sr depc, 1b
+ assert_sr exccause, 26
+test_end
+
+test autoload_pte_load_prohibited
+ set_vector kernel, 2f
+
+ pt_setup 0, 3, 0, 0x3000, 0, 0xc
+ assert_no_auto_tlb
+1:
+ l32i a2, a3, 0
+ test_fail
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+ assert_sr epc1, 1b
+ assert_sr exccause, 28
+test_end
+
+test autoload_pt_load_prohibited
+ set_vector kernel, 2f
+
+ pt_setup 0, 0xc, 0, 0x4000, 0x4000, 3
+ assert_no_auto_tlb
+1:
+ l32i a2, a3, 0
+ test_fail
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_no_auto_tlb
+ assert_sr epc1, 1b
+ assert_sr exccause, 24
+test_end
+
+test autoload_pt_privilege
+ set_vector kernel, 2f
+ pt_setup 0, 3, 1, 0x5000, 0, 3
+ go_ring 1, 0, 0x5001
+
+ l8ui a2, a3, 0
+1:
+ syscall
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+ assert_epc1_1m 1b
+ assert_sr exccause, 1
+test_end
+
+test autoload_pte_privilege
+ set_vector kernel, 2f
+ pt_setup 0, 3, 0, 0x6000, 0, 3
+ go_ring 1, 0, 0x6001
+1:
+ l8ui a2, a3, 0
+ syscall
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+ assert_epc1_1m 1b
+ assert_sr exccause, 26
+test_end
+
+test autoload_3_level_pt
+ set_vector kernel, 2f
+ pt_setup 1, 3, 1, 0x00400000, 0, 3
+ pt_setup 1, 3, 1, 0x80001000, 0x2000000, 3
+ go_ring 1, 0, 0x00400001
+1:
+ l8ui a2, a3, 0
+ syscall
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_no_auto_tlb
+ assert_epc1_1m 1b
+ assert_sr exccause, 24
test_end
test_suite_end
--
1.7.7.6
next prev parent reply other threads:[~2012-05-27 14:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-27 14:34 [Qemu-devel] [PULL 1.1 0/6] target-xtensa MMU fixes Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 1/6] target-xtensa: flush TLB page for new MMU mapping Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 2/6] target-xtensa: update EXCVADDR in case of page table lookup Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 3/6] target-xtensa: extract TLB entry setting method Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 4/6] target-xtensa: update autorefill TLB entries conditionally Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 5/6] target-xtensa: control page table lookup explicitly Max Filippov
2012-05-27 14:34 ` Max Filippov [this message]
2012-05-27 14:54 ` [Qemu-devel] [PULL 1.1 0/6] target-xtensa MMU fixes Andreas Färber
2012-05-27 15:27 ` Max Filippov
2012-06-09 11:30 ` Blue Swirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338129294-16742-7-git-send-email-jcmvbkbc@gmail.com \
--to=jcmvbkbc@gmail.com \
--cc=aliguori@us.ibm.com \
--cc=blauwirbel@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).