[Qemu-devel] [PATCH 07/27] z2: Rename PXA2xxState variable

["Andreas Färber" <afaerber@suse.de>]

Avoid cpu->cpu by using "mpu" as variable name.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/z2.c |   26 +++++++++++++-------------
 1 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/hw/z2.c b/hw/z2.c
index 9dd83ff..db25cdc 100644
--- a/hw/z2.c
+++ b/hw/z2.c
@@ -301,7 +301,7 @@ static void z2_init(ram_addr_t ram_size,
 {
     MemoryRegion *address_space_mem = get_system_memory();
     uint32_t sector_len = 0x10000;
-    PXA2xxState *cpu;
+    PXA2xxState *mpu;
     DriveInfo *dinfo;
     int be;
     void *z2_lcd;
@@ -313,7 +313,7 @@ static void z2_init(ram_addr_t ram_size,
     }
 
     /* Setup CPU & memory */
-    cpu = pxa270_init(address_space_mem, z2_binfo.ram_size, cpu_model);
+    mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, cpu_model);
 
 #ifdef TARGET_WORDS_BIGENDIAN
     be = 1;
@@ -337,25 +337,25 @@ static void z2_init(ram_addr_t ram_size,
     }
 
     /* setup keypad */
-    pxa27x_register_keypad(cpu->kp, map, 0x100);
+    pxa27x_register_keypad(mpu->kp, map, 0x100);
 
     /* MMC/SD host */
-    pxa2xx_mmci_handlers(cpu->mmc,
+    pxa2xx_mmci_handlers(mpu->mmc,
         NULL,
-        qdev_get_gpio_in(cpu->gpio, Z2_GPIO_SD_DETECT));
+        qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
 
     type_register_static(&zipit_lcd_info);
     type_register_static(&aer915_info);
-    z2_lcd = ssi_create_slave(cpu->ssp[1], "zipit-lcd");
-    bus = pxa2xx_i2c_bus(cpu->i2c[0]);
+    z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
+    bus = pxa2xx_i2c_bus(mpu->i2c[0]);
     i2c_create_slave(bus, "aer915", 0x55);
     wm = i2c_create_slave(bus, "wm8750", 0x1b);
-    cpu->i2s->opaque = wm;
-    cpu->i2s->codec_out = wm8750_dac_dat;
-    cpu->i2s->codec_in = wm8750_adc_dat;
-    wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);
+    mpu->i2s->opaque = wm;
+    mpu->i2s->codec_out = wm8750_dac_dat;
+    mpu->i2s->codec_in = wm8750_adc_dat;
+    wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
 
-    qdev_connect_gpio_out(cpu->gpio, Z2_GPIO_LCD_CS,
+    qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
         qemu_allocate_irqs(z2_lcd_cs, z2_lcd, 1)[0]);
 
     if (kernel_filename) {
@@ -363,7 +363,7 @@ static void z2_init(ram_addr_t ram_size,
         z2_binfo.kernel_cmdline = kernel_cmdline;
         z2_binfo.initrd_filename = initrd_filename;
         z2_binfo.board_id = 0x6dd;
-        arm_load_kernel(&cpu->cpu->env, &z2_binfo);
+        arm_load_kernel(&mpu->cpu->env, &z2_binfo);
     }
 }
 
-- 
1.7.7