qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 3/5] ehci: tracing improvements
Date: Tue, 12 Jun 2012 09:54:16 +0200	[thread overview]
Message-ID: <1339487658-8969-4-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1339487658-8969-1-git-send-email-kraxel@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/usb/hcd-ehci.c |    7 +++++--
 trace-events      |    5 +++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 45b774d..6d2d549 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -569,6 +569,7 @@ static inline void ehci_set_interrupt(EHCIState *s, int intr)
         level = 1;
     }
 
+    trace_usb_ehci_interrupt(level, s->usbsts, s->usbintr);
     qemu_set_irq(s->irq, level);
 }
 
@@ -822,8 +823,9 @@ static void ehci_attach(USBPort *port)
 {
     EHCIState *s = port->opaque;
     uint32_t *portsc = &s->portsc[port->index];
+    const char *owner = (*portsc & PORTSC_POWNER) ? "comp" : "ehci";
 
-    trace_usb_ehci_port_attach(port->index, port->dev->product_desc);
+    trace_usb_ehci_port_attach(port->index, owner, port->dev->product_desc);
 
     if (*portsc & PORTSC_POWNER) {
         USBPort *companion = s->companion_ports[port->index];
@@ -842,8 +844,9 @@ static void ehci_detach(USBPort *port)
 {
     EHCIState *s = port->opaque;
     uint32_t *portsc = &s->portsc[port->index];
+    const char *owner = (*portsc & PORTSC_POWNER) ? "comp" : "ehci";
 
-    trace_usb_ehci_port_detach(port->index);
+    trace_usb_ehci_port_detach(port->index, owner);
 
     if (*portsc & PORTSC_POWNER) {
         USBPort *companion = s->companion_ports[port->index];
diff --git a/trace-events b/trace-events
index f70523c..9db8945 100644
--- a/trace-events
+++ b/trace-events
@@ -252,12 +252,13 @@ usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QT
 usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
 usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
 usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ %08x: next %08x - active %d"
-usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s"
-usb_ehci_port_detach(uint32_t port) "detach port #%d"
+usb_ehci_port_attach(uint32_t port, const char *owner, const char *device) "attach port #%d, owner %s, device %s"
+usb_ehci_port_detach(uint32_t port, const char *owner) "detach port #%d, owner %s"
 usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
 usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d"
 usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
 usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s"
+usb_ehci_interrupt(uint32_t level, uint32_t sts, uint32_t mask) "level %d, sts 0x%x, mask 0x%x"
 
 # hw/usb/hcd-uhci.c
 usb_uhci_reset(void) "=== RESET ==="
-- 
1.7.1

  parent reply	other threads:[~2012-06-12  7:54 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-12  7:54 [Qemu-devel] [PATCH 0/5] usb: live migration bits Gerd Hoffmann
2012-06-12  7:54 ` [Qemu-devel] [PATCH 1/5] ehci: add live migration support Gerd Hoffmann
2012-06-12  7:54 ` [Qemu-devel] [PATCH 2/5] usb: restore USBDevice->attached on vmload Gerd Hoffmann
2012-06-12  7:54 ` Gerd Hoffmann [this message]
2012-06-12  7:54 ` [Qemu-devel] [PATCH 4/5] usb-host: attach only to running guest Gerd Hoffmann
2012-06-12  7:54 ` [Qemu-devel] [PATCH 5/5] usb-host: live migration support Gerd Hoffmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339487658-8969-4-git-send-email-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).