qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jia Liu <proljc@gmail.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v6 04/16] target-or32: Add interrupt support
Date: Thu, 21 Jun 2012 10:57:56 +0800	[thread overview]
Message-ID: <1340247488-10542-5-git-send-email-proljc@gmail.com> (raw)
In-Reply-To: <1340247488-10542-1-git-send-email-proljc@gmail.com>

Add OpenRISC interrupt support.

Signed-off-by: Jia Liu <proljc@gmail.com>
---
 cpu-exec.c                      |   17 +++++++++++++
 target-openrisc/Makefile.objs   |    2 +-
 target-openrisc/cpu.h           |    9 ++++++-
 target-openrisc/helper.h        |   25 +++++++++++++++++++
 target-openrisc/intrpt.c        |   44 +++++++++++++++++++++++++++++++++
 target-openrisc/intrpt_helper.c |   52 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 147 insertions(+), 2 deletions(-)
 create mode 100644 target-openrisc/helper.h
 create mode 100644 target-openrisc/intrpt_helper.c

diff --git a/cpu-exec.c b/cpu-exec.c
index 7d0d87b..1d2fe6b 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -378,6 +378,23 @@ int cpu_exec(CPUArchState *env)
                         do_interrupt(env);
                         next_tb = 0;
                     }
+#elif defined(TARGET_OPENRISC)
+                    {
+                        int idx = -1;
+                        if ((interrupt_request & CPU_INTERRUPT_HARD)
+                            && (env->sr & SR_IEE)) {
+                            idx = EXCP_INT;
+                        }
+                        if ((interrupt_request & CPU_INTERRUPT_TIMER)
+                            && (env->sr & SR_TEE)) {
+                            idx = EXCP_TICK;
+                        }
+                        if (idx >= 0) {
+                            env->exception_index = idx;
+                            do_interrupt(env);
+                            next_tb = 0;
+                        }
+                    }
 #elif defined(TARGET_SPARC)
                     if (interrupt_request & CPU_INTERRUPT_HARD) {
                         if (cpu_interrupts_enabled(env) &&
diff --git a/target-openrisc/Makefile.objs b/target-openrisc/Makefile.objs
index 21b76b2..65f9391 100644
--- a/target-openrisc/Makefile.objs
+++ b/target-openrisc/Makefile.objs
@@ -1,3 +1,3 @@
 obj-$(CONFIG_SOFTMMU) += machine.o
 obj-y += cpu.o intrpt.o mmu.o translate.o
-obj-y += mmu_helper.o
+obj-y += intrpt_helper.o mmu_helper.o
diff --git a/target-openrisc/cpu.h b/target-openrisc/cpu.h
index dbb3f17..d499dc4 100644
--- a/target-openrisc/cpu.h
+++ b/target-openrisc/cpu.h
@@ -66,6 +66,10 @@ enum {
 /* Internal flags, delay slot flag */
 #define D_FLAG    1
 
+/* Interrupt */
+#define NR_IRQS  32
+#define PIC_MASK 0xFFFFFFFF
+
 /* Verison Register */
 #define SPR_VR       0xFFFF003F
 
@@ -304,6 +308,7 @@ struct CPUOpenRISCState {
     uint32_t picsr;         /* Interrupt contrl register*/
 #endif
     uint32_t feature;       /* CPU Capabilities */
+    void *irq[32];          /* Interrupt irq input */
 };
 
 #define TYPE_OPENRISC_CPU "or32-cpu"
@@ -415,9 +420,11 @@ static inline int cpu_mmu_index(CPUOpenRISCState *env)
     return (env->sr & SR_SM) == 0 ? MMU_USER_IDX : MMU_SUPERVISOR_IDX;
 }
 
+#define CPU_INTERRUPT_TIMER   CPU_INTERRUPT_TGT_INT_0
 static inline bool cpu_has_work(CPUOpenRISCState *env)
 {
-    return true;
+    return env->interrupt_request & (CPU_INTERRUPT_HARD |
+                                     CPU_INTERRUPT_TIMER);
 }
 
 #include "exec-all.h"
diff --git a/target-openrisc/helper.h b/target-openrisc/helper.h
new file mode 100644
index 0000000..16d99b6
--- /dev/null
+++ b/target-openrisc/helper.h
@@ -0,0 +1,25 @@
+/*
+ *  OpenRISC helper defines
+ *
+ *  Copyright (c) 2011-2012 Jia Liu <proljc@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "def-helper.h"
+
+/* interrupt */
+DEF_HELPER_FLAGS_1(rfe, 0, void, env)
+
+#include "def-helper.h"
diff --git a/target-openrisc/intrpt.c b/target-openrisc/intrpt.c
index a3bb7f8..9b02618 100644
--- a/target-openrisc/intrpt.c
+++ b/target-openrisc/intrpt.c
@@ -27,4 +27,48 @@
 
 void do_interrupt(CPUOpenRISCState *env)
 {
+#ifndef CONFIG_USER_ONLY
+    if (env->flags & D_FLAG) { /* Delay Slot insn */
+        env->flags &= ~D_FLAG;
+        env->sr |= SR_DSX;
+        if (env->exception_index == EXCP_TICK    ||
+            env->exception_index == EXCP_INT     ||
+            env->exception_index == EXCP_SYSCALL ||
+            env->exception_index == EXCP_FPE) {
+            env->epcr = env->jmp_pc;
+        } else {
+            env->epcr = env->pc - 4;
+        }
+    } else {
+        if (env->exception_index == EXCP_TICK    ||
+            env->exception_index == EXCP_INT     ||
+            env->exception_index == EXCP_SYSCALL ||
+            env->exception_index == EXCP_FPE) {
+            env->epcr = env->npc;
+        } else {
+            env->epcr = env->pc;
+        }
+    }
+
+    /* For machine-state changed between user-mode and supervisor mode,
+       we need flush TLB when we enter&exit EXCP.  */
+    tlb_flush(env, 1);
+
+    env->esr = env->sr;
+    env->sr &= ~SR_DME;
+    env->sr &= ~SR_IME;
+    env->sr |= SR_SM;
+    env->sr &= ~SR_IEE;
+    env->sr &= ~SR_TEE;
+    env->tlb->map_address_data = &get_phys_nommu;
+    env->tlb->map_address_code = &get_phys_nommu;
+
+    if (env->exception_index > 0 && env->exception_index < EXCP_NR) {
+        env->pc = (env->exception_index << 8);
+    } else {
+        cpu_abort(env, "Unhandled exception 0x%x\n", env->exception_index);
+    }
+#endif
+
+    env->exception_index = -1;
 }
diff --git a/target-openrisc/intrpt_helper.c b/target-openrisc/intrpt_helper.c
new file mode 100644
index 0000000..fca0202
--- /dev/null
+++ b/target-openrisc/intrpt_helper.c
@@ -0,0 +1,52 @@
+/*
+ *  OpenRISC interrupt helper routines
+ *
+ *  Copyright (c) 2011-2012 Jia Liu <proljc@gmail.com>
+ *                          Feng Gao <gf91597@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "cpu.h"
+#include "helper.h"
+
+void HELPER(rfe)(CPUOpenRISCState *env)
+{
+#ifndef CONFIG_USER_ONLY
+    int need_flush_tlb = (env->sr & (SR_SM | SR_IME | SR_DME)) ^
+                         (env->esr & (SR_SM | SR_IME | SR_DME));
+#endif
+    env->pc = env->epcr;
+    env->npc = env->epcr;
+    env->sr = env->esr;
+
+#ifndef CONFIG_USER_ONLY
+    if (env->sr & SR_DME) {
+        env->tlb->map_address_data = &get_phys_data;
+    } else {
+        env->tlb->map_address_data = &get_phys_nommu;
+    }
+
+    if (env->sr & SR_IME) {
+        env->tlb->map_address_code = &get_phys_code;
+    } else {
+        env->tlb->map_address_code = &get_phys_nommu;
+    }
+
+    if (need_flush_tlb) {
+        tlb_flush(env, 1);
+    }
+#endif
+    env->interrupt_request |= CPU_INTERRUPT_EXITTB;
+}
-- 
1.7.9.5

  parent reply	other threads:[~2012-06-21  2:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-21  2:57 [Qemu-devel] [PATCH v6 00/16] QEMU OpenRISC support Jia Liu
2012-06-21  2:57 ` [Qemu-devel] [PATCH v6 01/16] target-or32: Add target stubs and cpu support Jia Liu
2012-06-21  2:57 ` [Qemu-devel] [PATCH v6 02/16] target-or32: Add target machine Jia Liu
2012-06-21  2:57 ` [Qemu-devel] [PATCH v6 03/16] target-or32: Add MMU support Jia Liu
2012-06-21  2:57 ` Jia Liu [this message]
2012-06-21  2:57 ` [Qemu-devel] [PATCH v6 05/16] target-or32: Add exception support Jia Liu
2012-06-21  2:57 ` [Qemu-devel] [PATCH v6 06/16] target-or32: Add int instruction helpers Jia Liu
2012-06-21  2:57 ` [Qemu-devel] [PATCH v6 07/16] target-or32: Add float " Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 08/16] target-or32: Add instruction tanslation Jia Liu
2012-06-21 10:24   ` Max Filippov
2012-06-25  2:50     ` Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 09/16] target-or32: Add PIC support Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 10/16] target-or32: Add timer support Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 11/16] target-or32: Add a IIS dummy board Jia Liu
2012-06-21  8:19   ` 陳韋任 (Wei-Ren Chen)
2012-06-21  9:10     ` Max Filippov
2012-06-21  9:11     ` Jia Liu
2012-06-21  9:03   ` Peter Crosthwaite
2012-06-25  2:23     ` Jia Liu
2012-06-25  2:33       ` Peter Crosthwaite
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 12/16] target-or32: Add system instructions Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 13/16] target-or32: Add gdb stub Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 14/16] target-or32: Add linux syscall, signal and termbits Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 15/16] target-or32: Add linux user support Jia Liu
2012-06-21  2:58 ` [Qemu-devel] [PATCH v6 16/16] target-or32: Add testcases Jia Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1340247488-10542-5-git-send-email-proljc@gmail.com \
    --to=proljc@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).