qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: minyard@acm.org
To: qemu-devel@nongnu.org
Cc: Corey Minyard <cminyard@mvista.com>
Subject: [Qemu-devel] [PATCH 2/9] pc: move SMBIOS setup to after device init
Date: Mon, 09 Jul 2012 14:17:02 -0500	[thread overview]
Message-ID: <1341861429-6297-3-git-send-email-minyard@acm.org> (raw)
In-Reply-To: <1341861429-6297-1-git-send-email-minyard@acm.org>

From: Corey Minyard <cminyard@mvista.com>

Setting up the firmware interface for the SMBIOS table needs to
be done later in the process, after device initialization, so that
devices can add entries to the table.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
 hw/pc.c      |   22 +++++++++++++---------
 hw/pc.h      |    9 +++++----
 hw/pc_piix.c |   12 ++++++++----
 3 files changed, 26 insertions(+), 17 deletions(-)

diff --git a/hw/pc.c b/hw/pc.c
index fb04c8b..c0acb6a 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -971,20 +971,12 @@ void pc_cpus_init(const char *cpu_model)
 }
 
 void pc_memory_init(MemoryRegion *system_memory,
-                    const char *kernel_filename,
-                    const char *kernel_cmdline,
-                    const char *initrd_filename,
                     ram_addr_t below_4g_mem_size,
                     ram_addr_t above_4g_mem_size,
-                    MemoryRegion *rom_memory,
                     MemoryRegion **ram_memory)
 {
-    int linux_boot, i;
-    MemoryRegion *ram, *option_rom_mr;
+    MemoryRegion *ram;
     MemoryRegion *ram_below_4g, *ram_above_4g;
-    void *fw_cfg;
-
-    linux_boot = (kernel_filename != NULL);
 
     /* Allocate RAM.  We allocate it as a single memory region and use
      * aliases to address portions of it, mostly for backwards compatibility
@@ -1006,7 +998,17 @@ void pc_memory_init(MemoryRegion *system_memory,
         memory_region_add_subregion(system_memory, 0x100000000ULL,
                                     ram_above_4g);
     }
+}
 
+void pc_bios_init(const char *kernel_filename,
+		  const char *kernel_cmdline,
+		  const char *initrd_filename,
+		  ram_addr_t below_4g_mem_size,
+		  MemoryRegion *rom_memory)
+{
+    MemoryRegion *option_rom_mr;
+    void *fw_cfg;
+    int linux_boot, i;
 
     /* Initialize PC system firmware */
     pc_system_firmware_init(rom_memory);
@@ -1019,6 +1021,8 @@ void pc_memory_init(MemoryRegion *system_memory,
                                         option_rom_mr,
                                         1);
 
+    linux_boot = (kernel_filename != NULL);
+
     fw_cfg = bochs_bios_init();
     rom_set_fw(fw_cfg);
 
diff --git a/hw/pc.h b/hw/pc.h
index 8ccf202..33ab689 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -107,13 +107,14 @@ void pc_acpi_smi_interrupt(void *opaque, int irq, int level);
 
 void pc_cpus_init(const char *cpu_model);
 void pc_memory_init(MemoryRegion *system_memory,
-                    const char *kernel_filename,
-                    const char *kernel_cmdline,
-                    const char *initrd_filename,
                     ram_addr_t below_4g_mem_size,
                     ram_addr_t above_4g_mem_size,
-                    MemoryRegion *rom_memory,
                     MemoryRegion **ram_memory);
+void pc_bios_init(const char *kernel_filename,
+		  const char *kernel_cmdline,
+		  const char *initrd_filename,
+		  ram_addr_t below_4g_mem_size,
+		  MemoryRegion *rom_memory);
 qemu_irq *pc_allocate_cpu_irq(void);
 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus);
 void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index fb86f27..21b4f59 100644
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -176,10 +176,8 @@ static void pc_init1(MemoryRegion *system_memory,
 
     /* allocate ram and load rom/bios */
     if (!xen_enabled()) {
-        pc_memory_init(system_memory,
-                       kernel_filename, kernel_cmdline, initrd_filename,
-                       below_4g_mem_size, above_4g_mem_size,
-                       pci_enabled ? rom_memory : system_memory, &ram_memory);
+        pc_memory_init(system_memory, below_4g_mem_size, above_4g_mem_size,
+		       &ram_memory);
     }
 
     gsi_state = g_malloc0(sizeof(*gsi_state));
@@ -287,6 +285,12 @@ static void pc_init1(MemoryRegion *system_memory,
     if (pci_enabled) {
         pc_pci_device_init(pci_bus);
     }
+
+    if (!xen_enabled()) {
+	pc_bios_init(kernel_filename, kernel_cmdline, initrd_filename,
+		     below_4g_mem_size,
+		     pci_enabled ? rom_memory : system_memory);
+    }
 }
 
 static void pc_init_pci(ram_addr_t ram_size,
-- 
1.7.4.1

  parent reply	other threads:[~2012-07-09 19:17 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-09 19:17 [Qemu-devel] First shot at adding IPMI to qemu minyard
2012-07-09 19:17 ` [Qemu-devel] [PATCH 1/9] smbios: Add a function to directly add an entry minyard
2012-07-09 19:17 ` minyard [this message]
2012-07-09 19:17 ` [Qemu-devel] [PATCH 3/9] isa: Add a way to query for a free interrupt minyard
2012-07-10  9:16   ` Paolo Bonzini
2012-07-09 19:17 ` [Qemu-devel] [PATCH 4/9] Add a base IPMI interface minyard
2012-07-10  9:17   ` Daniel P. Berrange
2012-07-10 11:12     ` Markus Armbruster
2012-07-10 16:19     ` Corey Minyard
2012-07-10  9:29   ` Paolo Bonzini
2012-07-09 19:17 ` [Qemu-devel] [PATCH 5/9] IPMI: Add a PC ISA type structure minyard
2012-07-10  9:17   ` Paolo Bonzini
2012-07-10  9:33   ` Paolo Bonzini
2012-07-10 20:00     ` Corey Minyard
2012-07-09 19:17 ` [Qemu-devel] [PATCH 6/9] IPMI: Add a KCS low-level interface minyard
2012-07-09 19:17 ` [Qemu-devel] [PATCH 7/9] IPMI: Add a BT " minyard
2012-07-09 19:17 ` [Qemu-devel] [PATCH 8/9] IPMI: Add a local BMC simulation minyard
2012-07-09 19:17 ` [Qemu-devel] [PATCH 9/9] IPMI: Add an external connection simulation interface minyard
2012-07-10  9:35 ` [Qemu-devel] First shot at adding IPMI to qemu Paolo Bonzini
2012-07-10 15:43   ` Corey Minyard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1341861429-6297-3-git-send-email-minyard@acm.org \
    --to=minyard@acm.org \
    --cc=cminyard@mvista.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).