From: minyard@acm.org
To: qemu-devel@nongnu.org
Cc: Corey Minyard <cminyard@mvista.com>
Subject: [Qemu-devel] [PATCH 02/16] pc: move SMBIOS setup to after device init
Date: Sun, 15 Jul 2012 15:24:57 -0500 [thread overview]
Message-ID: <1342383911-6094-2-git-send-email-minyard@acm.org> (raw)
In-Reply-To: <1342383911-6094-1-git-send-email-minyard@acm.org>
From: Corey Minyard <cminyard@mvista.com>
Setting up the firmware interface for the SMBIOS table needs to
be done later in the process, after device initialization, so that
devices can add entries to the table.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
hw/pc.c | 24 ++++++++++++++----------
hw/pc.h | 11 ++++++-----
hw/pc_piix.c | 12 ++++++++----
3 files changed, 28 insertions(+), 19 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index fb1ad5b..bc753c0 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -970,21 +970,13 @@ void pc_cpus_init(const char *cpu_model)
}
}
-void *pc_memory_init(MemoryRegion *system_memory,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
+void pc_memory_init(MemoryRegion *system_memory,
ram_addr_t below_4g_mem_size,
ram_addr_t above_4g_mem_size,
- MemoryRegion *rom_memory,
MemoryRegion **ram_memory)
{
- int linux_boot, i;
- MemoryRegion *ram, *option_rom_mr;
+ MemoryRegion *ram;
MemoryRegion *ram_below_4g, *ram_above_4g;
- void *fw_cfg;
-
- linux_boot = (kernel_filename != NULL);
/* Allocate RAM. We allocate it as a single memory region and use
* aliases to address portions of it, mostly for backwards compatibility
@@ -1006,7 +998,17 @@ void *pc_memory_init(MemoryRegion *system_memory,
memory_region_add_subregion(system_memory, 0x100000000ULL,
ram_above_4g);
}
+}
+void *pc_bios_init(const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ ram_addr_t below_4g_mem_size,
+ MemoryRegion *rom_memory)
+{
+ MemoryRegion *option_rom_mr;
+ void *fw_cfg;
+ int linux_boot, i;
/* Initialize PC system firmware */
pc_system_firmware_init(rom_memory);
@@ -1019,6 +1021,8 @@ void *pc_memory_init(MemoryRegion *system_memory,
option_rom_mr,
1);
+ linux_boot = (kernel_filename != NULL);
+
fw_cfg = bochs_bios_init();
rom_set_fw(fw_cfg);
diff --git a/hw/pc.h b/hw/pc.h
index a662090..d727dfb 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -106,14 +106,15 @@ void pc_register_ferr_irq(qemu_irq irq);
void pc_acpi_smi_interrupt(void *opaque, int irq, int level);
void pc_cpus_init(const char *cpu_model);
-void *pc_memory_init(MemoryRegion *system_memory,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
+void pc_memory_init(MemoryRegion *system_memory,
ram_addr_t below_4g_mem_size,
ram_addr_t above_4g_mem_size,
- MemoryRegion *rom_memory,
MemoryRegion **ram_memory);
+void *pc_bios_init(const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ ram_addr_t below_4g_mem_size,
+ MemoryRegion *rom_memory);
qemu_irq *pc_allocate_cpu_irq(void);
DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus);
void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index 98a06fa..2c3feaa 100644
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -178,10 +178,8 @@ static void pc_init1(MemoryRegion *system_memory,
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
- fw_cfg = pc_memory_init(system_memory,
- kernel_filename, kernel_cmdline, initrd_filename,
- below_4g_mem_size, above_4g_mem_size,
- pci_enabled ? rom_memory : system_memory, &ram_memory);
+ pc_memory_init(system_memory, below_4g_mem_size,
+ above_4g_mem_size, &ram_memory);
}
gsi_state = g_malloc0(sizeof(*gsi_state));
@@ -275,6 +273,12 @@ static void pc_init1(MemoryRegion *system_memory,
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
+ if (!xen_enabled()) {
+ fw_cfg = pc_bios_init(kernel_filename, kernel_cmdline,
+ initrd_filename, below_4g_mem_size,
+ pci_enabled ? rom_memory : system_memory);
+ }
+
if (pci_enabled && acpi_enabled) {
i2c_bus *smbus;
--
1.7.4.1
next prev parent reply other threads:[~2012-07-15 20:25 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-15 20:24 [Qemu-devel] [PATCH 01/16] smbios: Add a function to directly add an entry minyard
2012-07-15 20:24 ` minyard [this message]
2012-07-15 20:24 ` [Qemu-devel] [PATCH 03/16] vl: Move init_timer_alarm() earlier minyard
2012-07-15 20:24 ` [Qemu-devel] [PATCH 04/16] qemu-char: Allocate CharDriverState in qemu_chr_new_from_opts minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 05/16] qemu-char: Allow a chardev to reconnect if disconnected minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 06/16] qemu-char: Fix a race reporting opens and closes minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 07/16] qemu-char: remove free of chr from win_stdio_close minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 08/16] qemu-char: Close fd at end of file minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 09/16] qdev: Add a pre-firmware init capability minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 10/16] qom: release previous object when setting minyard
2012-07-16 6:24 ` Paolo Bonzini
2012-07-17 0:07 ` Corey Minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 11/16] Add a base IPMI interface minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 12/16] IPMI: Add a PC ISA type structure minyard
2012-07-16 7:16 ` Paolo Bonzini
2012-07-17 0:16 ` Corey Minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 13/16] IPMI: Add a KCS low-level interface minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 14/16] IPMI: Add a BT " minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 15/16] IPMI: Add a local BMC simulation minyard
2012-07-15 20:25 ` [Qemu-devel] [PATCH 16/16] IPMI: Add an external connection simulation interface minyard
2012-07-15 21:05 ` [Qemu-devel] [PATCH 01/16] smbios: Add a function to directly add an entry Corey Minyard
2012-07-16 15:46 ` Eric Blake
2012-07-17 0:06 ` Corey Minyard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342383911-6094-2-git-send-email-minyard@acm.org \
--to=minyard@acm.org \
--cc=cminyard@mvista.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).