From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 37/41] coroutine-ucontext: Help valgrind understand coroutines
Date: Tue, 17 Jul 2012 18:00:34 +0200 [thread overview]
Message-ID: <1342540838-9027-38-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1342540838-9027-1-git-send-email-kwolf@redhat.com>
valgrind tends to get confused and report false positives when you
switch stacks and don't tell it about it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
---
configure | 20 ++++++++++++++++++++
coroutine-ucontext.c | 28 ++++++++++++++++++++++++++++
2 files changed, 48 insertions(+), 0 deletions(-)
diff --git a/configure b/configure
index 0a3896e..cef0a71 100755
--- a/configure
+++ b/configure
@@ -2871,6 +2871,22 @@ if compile_prog "" "" ; then
fi
########################################
+# check if we have valgrind/valgrind.h
+
+valgrind_h=no
+cat > $TMPC << EOF
+#include <valgrind/valgrind.h>
+#pragma GCC diagnostic ignored "-Wunused-but-set-variable"
+int main(void) {
+ VALGRIND_STACK_DEREGISTER(0);
+ return 0;
+}
+EOF
+if compile_prog "" "" ; then
+ valgrind_h=yes
+fi
+
+########################################
# check if environ is declared
has_environ=no
@@ -3379,6 +3395,10 @@ if test "$linux_magic_h" = "yes" ; then
echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
fi
+if test "$valgrind_h" = "yes" ; then
+ echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
+fi
+
if test "$has_environ" = "yes" ; then
echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
fi
diff --git a/coroutine-ucontext.c b/coroutine-ucontext.c
index 5f43083..e3c450b 100644
--- a/coroutine-ucontext.c
+++ b/coroutine-ucontext.c
@@ -30,6 +30,10 @@
#include "qemu-common.h"
#include "qemu-coroutine-int.h"
+#ifdef CONFIG_VALGRIND_H
+#include <valgrind/valgrind.h>
+#endif
+
enum {
/* Maximum free pool size prevents holding too many freed coroutines */
POOL_MAX_SIZE = 64,
@@ -43,6 +47,11 @@ typedef struct {
Coroutine base;
void *stack;
jmp_buf env;
+
+#ifdef CONFIG_VALGRIND_H
+ unsigned int valgrind_stack_id;
+#endif
+
} CoroutineUContext;
/**
@@ -159,6 +168,11 @@ static Coroutine *coroutine_new(void)
uc.uc_stack.ss_size = stack_size;
uc.uc_stack.ss_flags = 0;
+#ifdef CONFIG_VALGRIND_H
+ co->valgrind_stack_id =
+ VALGRIND_STACK_REGISTER(co->stack, co->stack + stack_size);
+#endif
+
arg.p = co;
makecontext(&uc, (void (*)(void))coroutine_trampoline,
@@ -185,6 +199,16 @@ Coroutine *qemu_coroutine_new(void)
return co;
}
+#ifdef CONFIG_VALGRIND_H
+/* Work around an unused variable in the valgrind.h macro... */
+#pragma GCC diagnostic ignored "-Wunused-but-set-variable"
+static inline void valgrind_stack_deregister(CoroutineUContext *co)
+{
+ VALGRIND_STACK_DEREGISTER(co->valgrind_stack_id);
+}
+#pragma GCC diagnostic error "-Wunused-but-set-variable"
+#endif
+
void qemu_coroutine_delete(Coroutine *co_)
{
CoroutineUContext *co = DO_UPCAST(CoroutineUContext, base, co_);
@@ -196,6 +220,10 @@ void qemu_coroutine_delete(Coroutine *co_)
return;
}
+#ifdef CONFIG_VALGRIND_H
+ valgrind_stack_deregister(co);
+#endif
+
g_free(co->stack);
g_free(co);
}
--
1.7.6.5
next prev parent reply other threads:[~2012-07-17 16:02 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-17 15:59 [Qemu-devel] [PULL 00/41] Block patches Kevin Wolf
2012-07-17 15:59 ` [Qemu-devel] [PATCH 01/41] sheepdog: always use coroutine-based network functions Kevin Wolf
2012-07-17 15:59 ` [Qemu-devel] [PATCH 02/41] sheepdog: do not blindly memset all read buffers Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 03/41] fdc: Move floppy geometry guessing back from block.c Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 04/41] vvfat: Fix partition table Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 05/41] vvfat: Do not clobber the user's geometry Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 06/41] qtest: Add hard disk geometry test Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 07/41] hd-geometry: Move disk geometry guessing back from block.c Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 08/41] hd-geometry: Add tracepoints Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 09/41] hd-geometry: Unnest conditional in hd_geometry_guess() Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 10/41] hd-geometry: Factor out guess_chs_for_size() Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 11/41] hd-geometry: Clean up gratuitous goto in hd_geometry_guess() Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 12/41] hd-geometry: Clean up confusing use of prior translation hint Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 13/41] hd-geometry: Cut out block layer translation middleman Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 14/41] ide pc: Cut out the block layer geometry middleman Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 15/41] blockdev: Save geometry in DriveInfo Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 16/41] qdev: Introduce block geometry properties Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 17/41] hd-geometry: Switch to uint32_t to match BlockConf Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 18/41] scsi-hd: qdev properties for disk geometry Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 19/41] virtio-blk: " Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 20/41] ide: " Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 21/41] qtest: Cover " Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 22/41] qdev: Collect private helpers in one place Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 23/41] qdev: New property type chs-translation Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 24/41] ide: qdev property for BIOS CHS translation Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 25/41] qtest: Cover " Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 26/41] block: Geometry and translation hints are now useless, purge them Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 27/41] ide pc: Put hard disk info into CMOS only for hard disks Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 28/41] qtest: Test we don't put hard disk info into CMOS for a CD-ROM Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 29/41] hd-geometry: Compute BIOS CHS translation in one place Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 30/41] blockdev: Drop redundant CHS validation for if=ide Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 31/41] Relax IDE CHS limits from 16383, 16, 63 to 65535, 16, 255 Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 32/41] hw/block-common: Move BlockConf & friends from block.h Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 33/41] hw/block-common: Factor out fall back to legacy -drive serial= Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 34/41] blockdev: Don't limit DriveInfo serial to 20 characters Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 35/41] hw/block-common: Factor out fall back to legacy -drive cyls= Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 36/41] qemu-io: Fix memory leaks Kevin Wolf
2012-07-17 16:00 ` Kevin Wolf [this message]
2012-07-17 16:00 ` [Qemu-devel] [PATCH 38/41] qemu-iotests: Valgrind support Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 39/41] fdc: fix relative seek Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 40/41] fdc-test: introduce test_relative_seek Kevin Wolf
2012-07-17 16:00 ` [Qemu-devel] [PATCH 41/41] fdc-test: Clean up a bit Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342540838-9027-38-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).