[Qemu-devel] [PATCH RFC for-1.2] arm: Move some ARM devices into libhw

["Andreas Färber" <afaerber@suse.de>]

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 Hello Peter, here's my current draft for subjecting more arm devices to the
 stricter device checks in libhwX. Please review desired granularity (here:
 fine-grained) and naming (e.g., PL310 vs. l2x0).
 Since this is preparing for a future armeb-softmmu, Anthony's CONFIG_ARCH_ARM
 is not going to help here (we would want to turn off many devices for armeb).
 The SoCs with references to CPUs in their header are untouched, i.MX31 was
 not yet reviewed for movability.

 default-configs/arm-softmmu.mak |   19 +++++++++++++++++++
 hw/Makefile.objs                |   21 +++++++++++++++++++++
 hw/arm/Makefile.objs            |   16 ++++------------
 3 files changed, 44 insertions(+), 12 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index e542b4f..f8f32f6 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -27,3 +27,22 @@ CONFIG_SMC91C111=y
 CONFIG_DS1338=y
 CONFIG_PFLASH_CFI01=y
 CONFIG_PFLASH_CFI02=y
+
+CONFIG_ARM_TIMER=y
+CONFIG_PL011=y
+CONFIG_PL022=y
+CONFIG_PL031=y
+CONFIG_PL041=y
+CONFIG_PL050=y
+CONFIG_PL061=y
+CONFIG_PL080=y
+CONFIG_PL110=y
+CONFIG_PL181=y
+CONFIG_PL190=y
+CONFIG_PL310=y
+CONFIG_CADENCE=y
+CONFIG_XGMAC=y
+
+CONFIG_VERSATILE_PCI=y
+CONFIG_VERSATILE_I2C=y
+CONFIG_STELLARIS_ENET=y
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 8327e55..769fb43 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -66,6 +66,27 @@ hw-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
 hw-obj-$(CONFIG_XILINX_AXI) += xilinx_axidma.o
 hw-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o
 
+# ARM devices
+hw-obj-$(CONFIG_ARM_TIMER) += arm_timer.o
+hw-obj-$(CONFIG_PL011) += pl011.o
+hw-obj-$(CONFIG_PL022) += pl022.o
+hw-obj-$(CONFIG_PL031) += pl031.o
+hw-obj-$(CONFIG_PL041) += pl041.o
+hw-obj-$(CONFIG_PL050) += pl050.o
+hw-obj-$(CONFIG_PL061) += pl061.o
+hw-obj-$(CONFIG_PL080) += pl080.o
+hw-obj-$(CONFIG_PL110) += pl110.o
+hw-obj-$(CONFIG_PL181) += pl181.o
+hw-obj-$(CONFIG_PL190) += pl190.o
+hw-obj-$(CONFIG_PL310) += arm_l2x0.o
+hw-obj-$(CONFIG_VERSATILE_PCI) += versatile_pci.o
+hw-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
+hw-obj-$(CONFIG_CADENCE) += cadence_uart.o
+hw-obj-$(CONFIG_CADENCE) += cadence_ttc.o
+hw-obj-$(CONFIG_CADENCE) += cadence_gem.o
+hw-obj-$(CONFIG_XGMAC) += xgmac.o
+hw-obj-$(CONFIG_STELLARIS_ENET) += stellaris_enet.o
+
 # PCI watchdog devices
 hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
 
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index c413780..b1fc7f5 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -1,10 +1,5 @@
-obj-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
-obj-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
-obj-y += versatile_pci.o
-obj-y += versatile_i2c.o
-obj-y += cadence_uart.o
-obj-y += cadence_ttc.o
-obj-y += cadence_gem.o
+obj-y = integratorcp.o versatilepb.o arm_pic.o
+obj-y += arm_boot.o
 obj-y += xilinx_zynq.o zynq_slcr.o
 obj-y += arm_gic.o arm_gic_common.o
 obj-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
@@ -12,12 +7,9 @@ obj-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
 obj-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
 obj-y += exynos4210_pmu.o exynos4210_mct.o exynos4210_fimd.o
 obj-y += exynos4210_rtc.o exynos4210_i2c.o
-obj-y += arm_l2x0.o
 obj-y += arm_mptimer.o a15mpcore.o
-obj-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
+obj-y += armv7m.o armv7m_nvic.o stellaris.o
 obj-y += highbank.o
-obj-y += pl061.o
-obj-y += xgmac.o
 obj-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
 obj-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
 obj-y += gumstix.o
@@ -37,7 +29,7 @@ obj-y += strongarm.o
 obj-y += collie.o
 obj-y += imx_serial.o imx_ccm.o imx_timer.o imx_avic.o
 obj-y += kzm.o
-obj-y += pl041.o lm4549.o
+obj-y += lm4549.o
 obj-$(CONFIG_FDT) += ../device_tree.o
 
 obj-y := $(addprefix ../,$(obj-y))
-- 
1.7.7