[Qemu-devel] [PATCH 3/3] target-arm: Fix typos in comments

[Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>]

From: Peter Maydell <peter.maydell@linaro.org>

Fix a variety of typos in comments in target-arm files.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 target-arm/arm-semi.c    |    2 +-
 target-arm/cpu.h         |    2 +-
 target-arm/helper.c      |    6 +++---
 target-arm/neon_helper.c |   26 +++++++++++++-------------
 target-arm/op_helper.c   |    2 +-
 target-arm/translate.c   |   10 +++++-----
 6 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/target-arm/arm-semi.c b/target-arm/arm-semi.c
index 88ca9bb..2495206 100644
--- a/target-arm/arm-semi.c
+++ b/target-arm/arm-semi.c
@@ -281,7 +281,7 @@ uint32_t do_arm_semihosting(CPUARMState *env)
             return len - ret;
         }
     case TARGET_SYS_READC:
-       /* XXX: Read from debug cosole. Not implemented.  */
+       /* XXX: Read from debug console. Not implemented.  */
         return 0;
     case TARGET_SYS_ISTTY:
         if (use_gdb_syscalls()) {
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 191895c..d7f93d9 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -79,7 +79,7 @@ struct arm_boot_info;
 typedef struct CPUARMState {
     /* Regs for current mode.  */
     uint32_t regs[16];
-    /* Frequently accessed CPSR bits are stored separately for efficiently.
+    /* Frequently accessed CPSR bits are stored separately for efficiency.
        This contains all the other bits.  Use cpsr_{read,write} to access
        the whole CPSR.  */
     uint32_t uncached_cpsr;
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 5727da2..dceaa95 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -988,7 +988,7 @@ static void ttbr164_reset(CPUARMState *env, const ARMCPRegInfo *ri)
 }
 
 static const ARMCPRegInfo lpae_cp_reginfo[] = {
-    /* NOP AMAIR0/1: the override is because these clash with tha rather
+    /* NOP AMAIR0/1: the override is because these clash with the rather
      * broadly specified TLB_LOCKDOWN entry in the generic cp_reginfo.
      */
     { .name = "AMAIR0", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0,
@@ -2899,8 +2899,8 @@ uint32_t HELPER(logicq_cc)(uint64_t val)
     return (val >> 32) | (val != 0);
 }
 
-/* VFP support.  We follow the convention used for VFP instrunctions:
-   Single precition routines have a "s" suffix, double precision a
+/* VFP support.  We follow the convention used for VFP instructions:
+   Single precision routines have a "s" suffix, double precision a
    "d" suffix.  */
 
 /* Convert host exception flags to vfp form.  */
diff --git a/target-arm/neon_helper.c b/target-arm/neon_helper.c
index e0b9dbf..8bb5129 100644
--- a/target-arm/neon_helper.c
+++ b/target-arm/neon_helper.c
@@ -530,7 +530,7 @@ NEON_VOP(rshl_s16, neon_s16, 2)
 #undef NEON_FN
 
 /* The addition of the rounding constant may overflow, so we use an
- * intermediate 64 bits accumulator.  */
+ * intermediate 64 bit accumulator.  */
 uint32_t HELPER(neon_rshl_s32)(uint32_t valop, uint32_t shiftop)
 {
     int32_t dest;
@@ -547,8 +547,8 @@ uint32_t HELPER(neon_rshl_s32)(uint32_t valop, uint32_t shiftop)
     return dest;
 }
 
-/* Handling addition overflow with 64 bits inputs values is more
- * tricky than with 32 bits values.  */
+/* Handling addition overflow with 64 bit input values is more
+ * tricky than with 32 bit values.  */
 uint64_t HELPER(neon_rshl_s64)(uint64_t valop, uint64_t shiftop)
 {
     int8_t shift = (int8_t)shiftop;
@@ -590,7 +590,7 @@ NEON_VOP(rshl_u16, neon_u16, 2)
 #undef NEON_FN
 
 /* The addition of the rounding constant may overflow, so we use an
- * intermediate 64 bits accumulator.  */
+ * intermediate 64 bit accumulator.  */
 uint32_t HELPER(neon_rshl_u32)(uint32_t val, uint32_t shiftop)
 {
     uint32_t dest;
@@ -608,8 +608,8 @@ uint32_t HELPER(neon_rshl_u32)(uint32_t val, uint32_t shiftop)
     return dest;
 }
 
-/* Handling addition overflow with 64 bits inputs values is more
- * tricky than with 32 bits values.  */
+/* Handling addition overflow with 64 bit input values is more
+ * tricky than with 32 bit values.  */
 uint64_t HELPER(neon_rshl_u64)(uint64_t val, uint64_t shiftop)
 {
     int8_t shift = (uint8_t)shiftop;
@@ -817,7 +817,7 @@ NEON_VOP_ENV(qrshl_u16, neon_u16, 2)
 #undef NEON_FN
 
 /* The addition of the rounding constant may overflow, so we use an
- * intermediate 64 bits accumulator.  */
+ * intermediate 64 bit accumulator.  */
 uint32_t HELPER(neon_qrshl_u32)(CPUARMState *env, uint32_t val, uint32_t shiftop)
 {
     uint32_t dest;
@@ -846,8 +846,8 @@ uint32_t HELPER(neon_qrshl_u32)(CPUARMState *env, uint32_t val, uint32_t shiftop
     return dest;
 }
 
-/* Handling addition overflow with 64 bits inputs values is more
- * tricky than with 32 bits values.  */
+/* Handling addition overflow with 64 bit input values is more
+ * tricky than with 32 bit values.  */
 uint64_t HELPER(neon_qrshl_u64)(CPUARMState *env, uint64_t val, uint64_t shiftop)
 {
     int8_t shift = (int8_t)shiftop;
@@ -914,7 +914,7 @@ NEON_VOP_ENV(qrshl_s16, neon_s16, 2)
 #undef NEON_FN
 
 /* The addition of the rounding constant may overflow, so we use an
- * intermediate 64 bits accumulator.  */
+ * intermediate 64 bit accumulator.  */
 uint32_t HELPER(neon_qrshl_s32)(CPUARMState *env, uint32_t valop, uint32_t shiftop)
 {
     int32_t dest;
@@ -942,8 +942,8 @@ uint32_t HELPER(neon_qrshl_s32)(CPUARMState *env, uint32_t valop, uint32_t shift
     return dest;
 }
 
-/* Handling addition overflow with 64 bits inputs values is more
- * tricky than with 32 bits values.  */
+/* Handling addition overflow with 64 bit input values is more
+ * tricky than with 32 bit values.  */
 uint64_t HELPER(neon_qrshl_s64)(CPUARMState *env, uint64_t valop, uint64_t shiftop)
 {
     int8_t shift = (uint8_t)shiftop;
@@ -1671,7 +1671,7 @@ uint64_t HELPER(neon_negl_u64)(uint64_t x)
     return -x;
 }
 
-/* Saturnating sign manuipulation.  */
+/* Saturating sign manipulation.  */
 /* ??? Make these use NEON_VOP1 */
 #define DO_QABS8(x) do { \
     if (x == (int8_t)0x80) { \
diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
index 490111c..d77bfab 100644
--- a/target-arm/op_helper.c
+++ b/target-arm/op_helper.c
@@ -99,7 +99,7 @@ void tlb_fill(CPUARMState *env1, target_ulong addr, int is_write, int mmu_idx,
 }
 #endif
 
-/* FIXME: Pass an axplicit pointer to QF to CPUARMState, and move saturating
+/* FIXME: Pass an explicit pointer to QF to CPUARMState, and move saturating
    instructions into helper.c  */
 uint32_t HELPER(add_setq)(uint32_t a, uint32_t b)
 {
diff --git a/target-arm/translate.c b/target-arm/translate.c
index 494c682..edef79a 100644
--- a/target-arm/translate.c
+++ b/target-arm/translate.c
@@ -53,7 +53,7 @@ typedef struct DisasContext {
     int condjmp;
     /* The label that will be jumped to when the instruction is skipped.  */
     int condlabel;
-    /* Thumb-2 condtional execution bits.  */
+    /* Thumb-2 conditional execution bits.  */
     int condexec_mask;
     int condexec_cond;
     struct TranslationBlock *tb;
@@ -77,7 +77,7 @@ static uint32_t gen_opc_condexec_bits[OPC_BUF_SIZE];
 #endif
 
 /* These instructions trap after executing, so defer them until after the
-   conditional executions state has been updated.  */
+   conditional execution state has been updated.  */
 #define DISAS_WFI 4
 #define DISAS_SWI 5
 
@@ -155,7 +155,7 @@ static void load_reg_var(DisasContext *s, TCGv var, int reg)
 {
     if (reg == 15) {
         uint32_t addr;
-        /* normaly, since we updated PC, we need only to add one insn */
+        /* normally, since we updated PC, we need only to add one insn */
         if (s->thumb)
             addr = (long)s->pc + 2;
         else
@@ -4897,7 +4897,7 @@ static int disas_neon_data_insn(CPUARMState * env, DisasContext *s, uint32_t ins
                     size--;
             }
             shift = (insn >> 16) & ((1 << (3 + size)) - 1);
-            /* To avoid excessive dumplication of ops we implement shift
+            /* To avoid excessive duplication of ops we implement shift
                by immediate using the variable shift operations.  */
             if (op < 8) {
                 /* Shift by immediate:
@@ -6402,7 +6402,7 @@ static void gen_logicq_cc(TCGv_i64 val)
 
 /* Load/Store exclusive instructions are implemented by remembering
    the value/address loaded, and seeing if these are the same
-   when the store is performed. This should be is sufficient to implement
+   when the store is performed. This should be sufficient to implement
    the architecturally mandated semantics, and avoids having to monitor
    regular stores.
 
-- 
1.7.10.4