From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: aliguori@us.ibm.com
Subject: [Qemu-devel] [PATCH 04/23] s390: Fix error handling and condition code of service call
Date: Tue, 21 Aug 2012 12:05:38 -0500 [thread overview]
Message-ID: <1345568757-14365-5-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
In-Reply-To: <1345568757-14365-1-git-send-email-mdroth@linux.vnet.ibm.com>
From: Christian Borntraeger <borntraeger@de.ibm.com>
Invalid sccb addresses will cause specification or addressing exception.
Lets add those checks. Furthermore, the good case (cc=0) was incorrect
for KVM, we did not set the CC at all. We now use return codes < 0
as program checks and return codes > 0 as condition code values.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 9abf567d95a4e840df868ca993219175fbef8c22)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
target-s390x/kvm.c | 5 +++--
target-s390x/op_helper.c | 27 ++++++++++++++++++---------
2 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index 90aad61..e4e6f15 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -238,9 +238,10 @@ static int kvm_sclp_service_call(CPUS390XState *env, struct kvm_run *run,
code = env->regs[(ipbh0 & 0xf0) >> 4];
r = sclp_service_call(env, sccb, code);
- if (r) {
- setcc(env, 3);
+ if (r < 0) {
+ enter_pgmcheck(env, -r);
}
+ setcc(env, r);
return 0;
}
diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
index 7b72473..91dd8dc 100644
--- a/target-s390x/op_helper.c
+++ b/target-s390x/op_helper.c
@@ -19,6 +19,8 @@
*/
#include "cpu.h"
+#include "memory.h"
+#include "cputlb.h"
#include "dyngen-exec.h"
#include "host-utils.h"
#include "helper.h"
@@ -2366,6 +2368,9 @@ static void ext_interrupt(CPUS390XState *env, int type, uint32_t param,
cpu_inject_ext(env, type, param, param64);
}
+/*
+ * ret < 0 indicates program check, ret = 0,1,2,3 -> cc
+ */
int sclp_service_call(CPUS390XState *env, uint32_t sccb, uint64_t code)
{
int r = 0;
@@ -2375,10 +2380,12 @@ int sclp_service_call(CPUS390XState *env, uint32_t sccb, uint64_t code)
printf("sclp(0x%x, 0x%" PRIx64 ")\n", sccb, code);
#endif
+ /* basic checks */
+ if (!memory_region_is_ram(phys_page_find(sccb >> TARGET_PAGE_BITS)->mr)) {
+ return -PGM_ADDRESSING;
+ }
if (sccb & ~0x7ffffff8ul) {
- fprintf(stderr, "KVM: invalid sccb address 0x%x\n", sccb);
- r = -1;
- goto out;
+ return -PGM_SPECIFICATION;
}
switch(code) {
@@ -2405,22 +2412,24 @@ int sclp_service_call(CPUS390XState *env, uint32_t sccb, uint64_t code)
#ifdef DEBUG_HELPER
printf("KVM: invalid sclp call 0x%x / 0x%" PRIx64 "x\n", sccb, code);
#endif
- r = -1;
+ r = 3;
break;
}
-out:
return r;
}
/* SCLP service call */
uint32_t HELPER(servc)(uint32_t r1, uint64_t r2)
{
- if (sclp_service_call(env, r1, r2)) {
- return 3;
- }
+ int r;
- return 0;
+ r = sclp_service_call(env, r1, r2);
+ if (r < 0) {
+ program_interrupt(env, -r, 4);
+ return 0;
+ }
+ return r;
}
/* DIAG */
--
1.7.9.5
next prev parent reply other threads:[~2012-08-21 17:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 17:05 [Qemu-devel] [stable-1.1] Patch Round-up for stable 1.1.2 Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 01/23] qtest: fix infinite loop when QEMU aborts abruptly Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 02/23] configure: Don't override user's --cpu on MacOS and Solaris Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 03/23] ppc: Fix bug in handling of PAPR hypercall exits Michael Roth
2012-08-21 17:05 ` Michael Roth [this message]
2012-08-21 17:05 ` [Qemu-devel] [PATCH 05/23] kvmvapic: Disable if there is insufficient memory Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 06/23] qdev: fix use-after-free in the error path of qdev_init_nofail Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 07/23] virtio-blk: fix use-after-free while handling scsi commands Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 08/23] ehci: fix reset Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 09/23] ehci: don't flush cache on doorbell rings Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 10/23] uhci: fix uhci_async_cancel_all Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 11/23] usb: restore USBDevice->attached on vmload Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 12/23] usb-redir: Correctly handle the usb_redir_babble usbredir status Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 13/23] usb-ehci: Fix an assert whenever isoc transfers are used Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 14/23] qlist: add qlist_size() Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 15/23] json-parser: don't replicate tokens at each level of recursion Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 16/23] check-qjson: add test for large JSON objects Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 17/23] slirp: Enforce host-side user of smb share Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 18/23] slirp: Ensure smbd and shared directory exist when enable smb Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 19/23] slirp: Improve error reporting of inaccessible smb directories Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 20/23] apic: Resolve potential endless loop around apic_update_irq Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 21/23] apic: Reevaluate pending interrupts on LVT_LINT0 changes Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 22/23] apic: Defer interrupt updates to VCPU thread Michael Roth
2012-08-21 17:05 ` [Qemu-devel] [PATCH 23/23] update VERSION for 1.1.2 Michael Roth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345568757-14365-5-git-send-email-mdroth@linux.vnet.ibm.com \
--to=mdroth@linux.vnet.ibm.com \
--cc=aliguori@us.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).