From: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
To: qemu-devel@nongnu.org
Cc: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Subject: [Qemu-devel] [PATCH v5 1/6] fix some debug printf format strings
Date: Sun, 9 Sep 2012 19:27:41 -0600 [thread overview]
Message-ID: <1347240466-6152-2-git-send-email-mmogilvi_qemu@miniinfo.net> (raw)
In-Reply-To: <1347240466-6152-1-git-send-email-mmogilvi_qemu@miniinfo.net>
These are normally ifdefed out and don't matter. But if you enable
them, they ought to be correct.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
---
hw/cirrus_vga.c | 4 ++--
hw/i8259.c | 3 ++-
hw/ide/cmd646.c | 5 +++--
hw/ide/via.c | 5 +++--
4 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index e8dcc6b..68c36f3 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -2055,8 +2055,8 @@ static void cirrus_vga_mem_write(void *opaque,
}
} else {
#ifdef DEBUG_CIRRUS
- printf("cirrus: mem_writeb " TARGET_FMT_plx " value %02x\n", addr,
- mem_value);
+ printf("cirrus: mem_writeb " TARGET_FMT_plx " value %02" PRIx64 "\n",
+ addr, mem_value);
#endif
}
}
diff --git a/hw/i8259.c b/hw/i8259.c
index 53daf78..6587666 100644
--- a/hw/i8259.c
+++ b/hw/i8259.c
@@ -355,7 +355,8 @@ static uint64_t pic_ioport_read(void *opaque, target_phys_addr_t addr,
ret = s->imr;
}
}
- DPRINTF("read: addr=0x%02x val=0x%02x\n", addr, ret);
+ DPRINTF("read: addr=0x%02" TARGET_PRIxPHYS " val=0x%02x\n",
+ addr, ret);
return ret;
}
diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index e0b9443..dd2855e 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -154,7 +154,7 @@ static uint64_t bmdma_read(void *opaque, target_phys_addr_t addr,
break;
}
#ifdef DEBUG_IDE
- printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
+ printf("bmdma: readb 0x%02" TARGET_PRIxPHYS " : 0x%02x\n", addr, val);
#endif
return val;
}
@@ -170,7 +170,8 @@ static void bmdma_write(void *opaque, target_phys_addr_t addr,
}
#ifdef DEBUG_IDE
- printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
+ printf("bmdma: writeb 0x%02" TARGET_PRIxPHYS " : 0x%02" PRIx64 "\n",
+ addr, val);
#endif
switch(addr & 3) {
case 0:
diff --git a/hw/ide/via.c b/hw/ide/via.c
index b20e4f0..948a469 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -55,7 +55,7 @@ static uint64_t bmdma_read(void *opaque, target_phys_addr_t addr,
break;
}
#ifdef DEBUG_IDE
- printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
+ printf("bmdma: readb 0x%02" TARGET_PRIxPHYS " : 0x%02x\n", addr, val);
#endif
return val;
}
@@ -70,7 +70,8 @@ static void bmdma_write(void *opaque, target_phys_addr_t addr,
}
#ifdef DEBUG_IDE
- printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
+ printf("bmdma: writeb 0x%02" TARGET_PRIxPHYS " : 0x%02" PRIx64 "\n",
+ addr, val);
#endif
switch (addr & 3) {
case 0:
--
1.7.10.2.484.gcd07cc5
next prev parent reply other threads:[~2012-09-10 1:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-10 1:27 [Qemu-devel] [PATCH v5 0/6] Running Microport UNIX (ca 1987) Matthew Ogilvie
2012-09-10 1:27 ` Matthew Ogilvie [this message]
2012-09-10 1:27 ` [Qemu-devel] [PATCH v5 2/6] vl: fix -hdachs/-hda argument order parsing issues Matthew Ogilvie
2012-09-10 1:27 ` [Qemu-devel] [PATCH v5 3/6] qemu-options.hx: mention retrace= VGA option Matthew Ogilvie
2012-09-10 1:27 ` [Qemu-devel] [PATCH v5 4/6] vga: add some optional CGA compatibility hacks Matthew Ogilvie
2012-09-10 1:27 ` [Qemu-devel] [PATCH v5 5/6] i8259: fix so that dropping IRQ level always clears the interrupt request Matthew Ogilvie
2012-09-10 8:56 ` Avi Kivity
2012-09-10 9:09 ` Jan Kiszka
2012-09-10 9:18 ` Avi Kivity
2012-09-10 9:33 ` Jan Kiszka
2012-09-10 13:09 ` Maciej W. Rozycki
2012-09-11 12:57 ` Avi Kivity
2012-09-11 4:32 ` Matthew Ogilvie
2012-09-11 9:05 ` Jan Kiszka
2012-09-11 12:58 ` Avi Kivity
2012-11-19 15:28 ` BALATON Zoltan
2012-11-20 5:05 ` Matthew Ogilvie
2012-09-10 1:27 ` [Qemu-devel] [PATCH v5 6/6] i8259: refactor pic_set_irq level logic Matthew Ogilvie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347240466-6152-2-git-send-email-mmogilvi_qemu@miniinfo.net \
--to=mmogilvi_qemu@miniinfo.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).