* [Qemu-devel] [PATCH 1/9] ehci: Don't set seen to 0 when removing unseen queue-heads
@ 2012-09-12 11:39 Hans de Goede
2012-09-12 11:39 ` [Qemu-devel] [PATCH 2/9] ehci: Walk async schedule before and after migration Hans de Goede
0 siblings, 1 reply; 3+ messages in thread
From: Hans de Goede @ 2012-09-12 11:39 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: Hans de Goede, qemu-devel
When removing unseen queue-heads from the async queue list, we should not
set the seen flag to 0, as this may cause them to be removed by
ehci_queues_rip_unused() during the next call to ehci_advance_async_state()
if the timer is late or running at a low frequency.
Note:
1) This *may* have caused the instant unlink / relinks described in commit
9bc3a3a216e2689bfcdd36c3e079333bbdbf3ba0
2) Rather then putting more if-s inside ehci_queues_rip_unused, this patch
instead introduces a new ehci_queues_rip_unseen function.
3) This patch also makes it save to call ehci_queues_rip_unseen() multiple
times, which gets used in the folluw up patch titled:
"ehci: Walk async schedule before and after migration"
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
hw/usb/hcd-ehci.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 2f3e9c0..c5f2635 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -853,10 +853,10 @@ static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint32_t addr,
return NULL;
}
-static void ehci_queues_rip_unused(EHCIState *ehci, int async, int flush)
+static void ehci_queues_rip_unused(EHCIState *ehci, int async)
{
EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
- const char *warn = (async && !flush) ? "guest unlinked busy QH" : NULL;
+ const char *warn = async ? "guest unlinked busy QH" : NULL;
uint64_t maxage = FRAME_TIMER_NS * ehci->maxframes * 4;
EHCIQueue *q, *tmp;
@@ -866,13 +866,25 @@ static void ehci_queues_rip_unused(EHCIState *ehci, int async, int flush)
q->ts = ehci->last_run_ns;
continue;
}
- if (!flush && ehci->last_run_ns < q->ts + maxage) {
+ if (ehci->last_run_ns < q->ts + maxage) {
continue;
}
ehci_free_queue(q, warn);
}
}
+static void ehci_queues_rip_unseen(EHCIState *ehci, int async)
+{
+ EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
+ EHCIQueue *q, *tmp;
+
+ QTAILQ_FOREACH_SAFE(q, head, next, tmp) {
+ if (!q->seen) {
+ ehci_free_queue(q, NULL);
+ }
+ }
+}
+
static void ehci_queues_rip_device(EHCIState *ehci, USBDevice *dev, int async)
{
EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
@@ -1732,7 +1744,7 @@ static int ehci_state_waitlisthead(EHCIState *ehci, int async)
ehci_set_usbsts(ehci, USBSTS_REC);
}
- ehci_queues_rip_unused(ehci, async, 0);
+ ehci_queues_rip_unused(ehci, async);
/* Find the head of the list (4.9.1.1) */
for(i = 0; i < MAX_QH; i++) {
@@ -2364,7 +2376,7 @@ static void ehci_advance_async_state(EHCIState *ehci)
*/
if (ehci->usbcmd & USBCMD_IAAD) {
/* Remove all unseen qhs from the async qhs queue */
- ehci_queues_rip_unused(ehci, async, 1);
+ ehci_queues_rip_unseen(ehci, async);
trace_usb_ehci_doorbell_ack();
ehci->usbcmd &= ~USBCMD_IAAD;
ehci_raise_irq(ehci, USBSTS_IAA);
@@ -2417,7 +2429,7 @@ static void ehci_advance_periodic_state(EHCIState *ehci)
ehci_set_fetch_addr(ehci, async,entry);
ehci_set_state(ehci, async, EST_FETCHENTRY);
ehci_advance_state(ehci, async);
- ehci_queues_rip_unused(ehci, async, 0);
+ ehci_queues_rip_unused(ehci, async);
break;
default:
--
1.7.12
^ permalink raw reply related [flat|nested] 3+ messages in thread* [Qemu-devel] [PATCH 2/9] ehci: Walk async schedule before and after migration
2012-09-12 11:39 [Qemu-devel] [PATCH 1/9] ehci: Don't set seen to 0 when removing unseen queue-heads Hans de Goede
@ 2012-09-12 11:39 ` Hans de Goede
0 siblings, 0 replies; 3+ messages in thread
From: Hans de Goede @ 2012-09-12 11:39 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: Hans de Goede, qemu-devel
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
hw/usb/hcd-ehci.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index c5f2635..e67cbc7 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -34,6 +34,7 @@
#include "monitor.h"
#include "trace.h"
#include "dma.h"
+#include "sysemu.h"
#define EHCI_DEBUG 0
@@ -2574,6 +2575,32 @@ static int usb_ehci_post_load(void *opaque, int version_id)
return 0;
}
+static void usb_ehci_vm_state_change(void *opaque, int running, RunState state)
+{
+ EHCIState *ehci = opaque;
+
+ /*
+ * We don't migrate the EHCIQueue-s, instead we rebuild them for the
+ * schedule in guest memory. We must do the rebuilt ASAP, so that
+ * USB-devices which have async handled packages have a packet in the
+ * ep queue to match the completion with.
+ */
+ if (state == RUN_STATE_RUNNING) {
+ ehci_advance_async_state(ehci);
+ }
+
+ /*
+ * The schedule rebuilt from guest memory could cause the migration dest
+ * to miss a QH unlink, and fail to cancel packets, since the unlinked QH
+ * will never have existed on the destination. Therefor we must flush the
+ * async schedule on savevm to catch any not yet noticed unlinks.
+ */
+ if (state == RUN_STATE_SAVE_VM) {
+ ehci_advance_async_state(ehci);
+ ehci_queues_rip_unseen(ehci, 1);
+ }
+}
+
static const VMStateDescription vmstate_ehci = {
.name = "ehci",
.version_id = 2,
@@ -2723,6 +2750,7 @@ static int usb_ehci_initfn(PCIDevice *dev)
usb_packet_init(&s->ipacket);
qemu_register_reset(ehci_reset, s);
+ qemu_add_vm_change_state_handler(usb_ehci_vm_state_change, s);
memory_region_init_io(&s->mem, &ehci_mem_ops, s, "ehci", MMIO_SIZE);
pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mem);
--
1.7.12
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Qemu-devel] [PATCH 1/9] ehci: Don't set seen to 0 when removing unseen queue-heads
@ 2012-09-12 13:08 Hans de Goede
2012-09-12 13:08 ` [Qemu-devel] [PATCH 2/9] ehci: Walk async schedule before and after migration Hans de Goede
0 siblings, 1 reply; 3+ messages in thread
From: Hans de Goede @ 2012-09-12 13:08 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: Hans de Goede, qemu-devel
When removing unseen queue-heads from the async queue list, we should not
set the seen flag to 0, as this may cause them to be removed by
ehci_queues_rip_unused() during the next call to ehci_advance_async_state()
if the timer is late or running at a low frequency.
Note:
1) This *may* have caused the instant unlink / relinks described in commit
9bc3a3a216e2689bfcdd36c3e079333bbdbf3ba0
2) Rather then putting more if-s inside ehci_queues_rip_unused, this patch
instead introduces a new ehci_queues_rip_unseen function.
3) This patch also makes it save to call ehci_queues_rip_unseen() multiple
times, which gets used in the folluw up patch titled:
"ehci: Walk async schedule before and after migration"
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
hw/usb/hcd-ehci.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 2f3e9c0..c5f2635 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -853,10 +853,10 @@ static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint32_t addr,
return NULL;
}
-static void ehci_queues_rip_unused(EHCIState *ehci, int async, int flush)
+static void ehci_queues_rip_unused(EHCIState *ehci, int async)
{
EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
- const char *warn = (async && !flush) ? "guest unlinked busy QH" : NULL;
+ const char *warn = async ? "guest unlinked busy QH" : NULL;
uint64_t maxage = FRAME_TIMER_NS * ehci->maxframes * 4;
EHCIQueue *q, *tmp;
@@ -866,13 +866,25 @@ static void ehci_queues_rip_unused(EHCIState *ehci, int async, int flush)
q->ts = ehci->last_run_ns;
continue;
}
- if (!flush && ehci->last_run_ns < q->ts + maxage) {
+ if (ehci->last_run_ns < q->ts + maxage) {
continue;
}
ehci_free_queue(q, warn);
}
}
+static void ehci_queues_rip_unseen(EHCIState *ehci, int async)
+{
+ EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
+ EHCIQueue *q, *tmp;
+
+ QTAILQ_FOREACH_SAFE(q, head, next, tmp) {
+ if (!q->seen) {
+ ehci_free_queue(q, NULL);
+ }
+ }
+}
+
static void ehci_queues_rip_device(EHCIState *ehci, USBDevice *dev, int async)
{
EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;
@@ -1732,7 +1744,7 @@ static int ehci_state_waitlisthead(EHCIState *ehci, int async)
ehci_set_usbsts(ehci, USBSTS_REC);
}
- ehci_queues_rip_unused(ehci, async, 0);
+ ehci_queues_rip_unused(ehci, async);
/* Find the head of the list (4.9.1.1) */
for(i = 0; i < MAX_QH; i++) {
@@ -2364,7 +2376,7 @@ static void ehci_advance_async_state(EHCIState *ehci)
*/
if (ehci->usbcmd & USBCMD_IAAD) {
/* Remove all unseen qhs from the async qhs queue */
- ehci_queues_rip_unused(ehci, async, 1);
+ ehci_queues_rip_unseen(ehci, async);
trace_usb_ehci_doorbell_ack();
ehci->usbcmd &= ~USBCMD_IAAD;
ehci_raise_irq(ehci, USBSTS_IAA);
@@ -2417,7 +2429,7 @@ static void ehci_advance_periodic_state(EHCIState *ehci)
ehci_set_fetch_addr(ehci, async,entry);
ehci_set_state(ehci, async, EST_FETCHENTRY);
ehci_advance_state(ehci, async);
- ehci_queues_rip_unused(ehci, async, 0);
+ ehci_queues_rip_unused(ehci, async);
break;
default:
--
1.7.12
^ permalink raw reply related [flat|nested] 3+ messages in thread* [Qemu-devel] [PATCH 2/9] ehci: Walk async schedule before and after migration
2012-09-12 13:08 [Qemu-devel] [PATCH 1/9] ehci: Don't set seen to 0 when removing unseen queue-heads Hans de Goede
@ 2012-09-12 13:08 ` Hans de Goede
0 siblings, 0 replies; 3+ messages in thread
From: Hans de Goede @ 2012-09-12 13:08 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: Hans de Goede, qemu-devel
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
hw/usb/hcd-ehci.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index c5f2635..e67cbc7 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -34,6 +34,7 @@
#include "monitor.h"
#include "trace.h"
#include "dma.h"
+#include "sysemu.h"
#define EHCI_DEBUG 0
@@ -2574,6 +2575,32 @@ static int usb_ehci_post_load(void *opaque, int version_id)
return 0;
}
+static void usb_ehci_vm_state_change(void *opaque, int running, RunState state)
+{
+ EHCIState *ehci = opaque;
+
+ /*
+ * We don't migrate the EHCIQueue-s, instead we rebuild them for the
+ * schedule in guest memory. We must do the rebuilt ASAP, so that
+ * USB-devices which have async handled packages have a packet in the
+ * ep queue to match the completion with.
+ */
+ if (state == RUN_STATE_RUNNING) {
+ ehci_advance_async_state(ehci);
+ }
+
+ /*
+ * The schedule rebuilt from guest memory could cause the migration dest
+ * to miss a QH unlink, and fail to cancel packets, since the unlinked QH
+ * will never have existed on the destination. Therefor we must flush the
+ * async schedule on savevm to catch any not yet noticed unlinks.
+ */
+ if (state == RUN_STATE_SAVE_VM) {
+ ehci_advance_async_state(ehci);
+ ehci_queues_rip_unseen(ehci, 1);
+ }
+}
+
static const VMStateDescription vmstate_ehci = {
.name = "ehci",
.version_id = 2,
@@ -2723,6 +2750,7 @@ static int usb_ehci_initfn(PCIDevice *dev)
usb_packet_init(&s->ipacket);
qemu_register_reset(ehci_reset, s);
+ qemu_add_vm_change_state_handler(usb_ehci_vm_state_change, s);
memory_region_init_io(&s->mem, &ehci_mem_ops, s, "ehci", MMIO_SIZE);
pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mem);
--
1.7.12
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-09-12 13:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-12 11:39 [Qemu-devel] [PATCH 1/9] ehci: Don't set seen to 0 when removing unseen queue-heads Hans de Goede
2012-09-12 11:39 ` [Qemu-devel] [PATCH 2/9] ehci: Walk async schedule before and after migration Hans de Goede
-- strict thread matches above, loose matches on Subject: below --
2012-09-12 13:08 [Qemu-devel] [PATCH 1/9] ehci: Don't set seen to 0 when removing unseen queue-heads Hans de Goede
2012-09-12 13:08 ` [Qemu-devel] [PATCH 2/9] ehci: Walk async schedule before and after migration Hans de Goede
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).