qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
To: qemu-devel@nongnu.org, kvm@vger.kernel.org, seabios@seabios.org
Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>,
	gleb@redhat.com, blauwirbel@gmail.com, kevin@koconnor.net,
	avi@redhat.com, anthony@codemonkey.ws, imammedo@redhat.com,
	eblake@redhat.com, kraxel@redhat.com
Subject: [Qemu-devel] [RFC PATCH v3 14/19][SeaBIOS] Add _OST dimm method
Date: Fri, 21 Sep 2012 13:17:30 +0200	[thread overview]
Message-ID: <1348226255-4226-15-git-send-email-vasilis.liaskovitis@profitbricks.com> (raw)
In-Reply-To: <1348226255-4226-1-git-send-email-vasilis.liaskovitis@profitbricks.com>

Add support for _OST method. _OST method will write into the correct I/O byte to
signal success / failure of hot-add or hot-remove to qemu.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
---
 src/acpi-dsdt.dsl |   50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 src/ssdt-mem.dsl  |    4 ++++
 2 files changed, 54 insertions(+), 0 deletions(-)

diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl
index 5d3e92b..0d37bbc 100644
--- a/src/acpi-dsdt.dsl
+++ b/src/acpi-dsdt.dsl
@@ -762,6 +762,28 @@ DefinitionBlock (
             MPE, 8
         }
         
+
+        /* Memory hot-remove notify failure byte */
+        OperationRegion(MEEF, SystemIO, 0xafa1, 1)
+        Field (MEEF, ByteAcc, NoLock, Preserve)
+        {
+            MEF, 8
+        }
+
+        /* Memory hot-add notify success byte */
+        OperationRegion(MPIS, SystemIO, 0xafa2, 1)
+        Field (MPIS, ByteAcc, NoLock, Preserve)
+        {
+            MIS, 8
+        }
+
+        /* Memory hot-add notify failure byte */
+        OperationRegion(MPIF, SystemIO, 0xafa3, 1)
+        Field (MPIF, ByteAcc, NoLock, Preserve)
+        {
+            MIF, 8
+        }
+
         Method(MESC, 0) {
             // Local5 = active memdevice bitmap
             Store (MES, Local5)
@@ -802,6 +824,34 @@ DefinitionBlock (
             Store(Arg0, MPE)
             Sleep(200)
         }
+        Method (MOST, 3, Serialized) {
+            // _OST method - OS status indication
+            Switch (And(Arg0, 0xFF)) {
+                Case(0x3)
+                {
+                    Switch(And(Arg1, 0xFF)) {
+                        Case(0x1) {
+                            Store(Arg2, MEF)
+                            // Revert MEON flag for this memory device to one
+                            Store(One, Index(MEON, Arg2))
+                        }
+                    }
+                }
+                Case(0x1)
+                {
+                    Switch(And(Arg1, 0xFF)) {
+                        Case(0x0) {
+                            Store(Arg2, MIS)
+                        }
+                        Case(0x1) {
+                            Store(Arg2, MIF)
+                            // Revert MEON flag for this memory device to zero
+                            Store(Zero, Index(MEON, Arg2))
+                        }
+                    }
+                }
+            }
+        }
     }
 
 
diff --git a/src/ssdt-mem.dsl b/src/ssdt-mem.dsl
index ee322f0..041d301 100644
--- a/src/ssdt-mem.dsl
+++ b/src/ssdt-mem.dsl
@@ -38,6 +38,7 @@ DefinitionBlock ("ssdt-mem.aml", "SSDT", 0x02, "BXPC", "CSSDT", 0x1)
 
         External(CMST, MethodObj)
         External(MPEJ, MethodObj)
+        External(MOST, MethodObj)
 
         Name(_CRS, ResourceTemplate() {
             QwordMemory(
@@ -60,6 +61,9 @@ DefinitionBlock ("ssdt-mem.aml", "SSDT", 0x02, "BXPC", "CSSDT", 0x1)
         Method (_EJ0, 1, NotSerialized) {
             MPEJ(ID, Arg0)
         }
+        Method (_OST, 3) {
+            MOST(Arg0, Arg1, ID)
+        }
     }
 }    
 
-- 
1.7.9

  parent reply	other threads:[~2012-09-21 11:18 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-21 11:17 [Qemu-devel] [RFC PATCH v3 00/19] ACPI memory hotplug Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 01/19][SeaBIOS] Add ACPI_EXTRACT_DEVICE* macros Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 02/19][SeaBIOS] Add SSDT memory device support Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 03/19][SeaBIOS] acpi-dsdt: Implement functions for memory hotplug Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 04/19][SeaBIOS] acpi: generate hotplug memory devices Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 05/19] Implement dimm device abstraction Vasilis Liaskovitis
2012-09-24  6:02   ` Wen Congyang
2012-10-23 12:25   ` Stefan Hajnoczi
2012-10-24  8:06     ` liu ping fan
2012-10-24 10:15       ` Stefan Hajnoczi
2012-10-24 17:16         ` Vasilis Liaskovitis
2012-10-25  8:00           ` liu ping fan
2012-10-31 11:15       ` Avi Kivity
2012-10-31 12:18         ` Stefan Hajnoczi
2012-10-31 12:34           ` Avi Kivity
2012-10-31 12:34             ` Stefan Hajnoczi
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 06/19] Implement "-dimm" command line option Vasilis Liaskovitis
2012-09-22 13:46   ` Blue Swirl
2012-09-24 10:42     ` Vasilis Liaskovitis
2012-09-29 11:13       ` Blue Swirl
2012-10-09 17:04         ` Vasilis Liaskovitis
2012-10-13  8:57           ` Blue Swirl
2012-10-17  9:19             ` Vasilis Liaskovitis
2012-10-17 10:03               ` Avi Kivity
2012-10-18  9:27                 ` Vasilis Liaskovitis
2012-10-18 12:33                   ` Avi Kivity
2012-10-19 17:48                     ` Blue Swirl
2012-10-22 10:55                       ` Avi Kivity
2012-10-22  8:39                     ` Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 07/19] acpi_piix4: Implement memory device hotplug registers Vasilis Liaskovitis
2012-09-22 13:49   ` Blue Swirl
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 08/19] pc: calculate dimm physical addresses and adjust memory map Vasilis Liaskovitis
2012-09-22 14:15   ` Blue Swirl
2012-09-24 15:27     ` Vasilis Liaskovitis
2012-09-29 11:27       ` Blue Swirl
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 09/19] pc: Add dimm paravirt SRAT info Vasilis Liaskovitis
2012-09-27  3:55   ` Wen Congyang
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 10/19] fix live-migration when "populated=on" is missing Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 11/19] Implement qmp and hmp commands for notification lists Vasilis Liaskovitis
2012-09-21 22:03   ` Eric Blake
2012-09-24 14:45     ` Vasilis Liaskovitis
2012-10-23 12:15   ` Stefan Hajnoczi
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 12/19] Implement "info memory-total" and "query-memory-total" Vasilis Liaskovitis
2012-09-21 22:36   ` Eric Blake
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 13/19] balloon: update with hotplugged memory Vasilis Liaskovitis
2012-09-21 11:17 ` Vasilis Liaskovitis [this message]
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 15/19] Add _OST dimm support Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 16/19] Update dimm state on reset Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 17/19][SeaBIOS] Implement _PS3 method for memory device Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 18/19] Implement _PS3 for dimm Vasilis Liaskovitis
2012-09-21 11:17 ` [Qemu-devel] [RFC PATCH v3 19/19][SeaBIOS] Calculate pcimem_start and pcimem64_start from SRAT entries Vasilis Liaskovitis
2012-09-21 11:19   ` [Qemu-devel] [RFC PATCH v3 19/19] alternative: Introduce paravirt interface QEMU_CFG_PCI_WINDOW Vasilis Liaskovitis
2012-09-21 11:20   ` [Qemu-devel] [RFC PATCH v3 20/19][SeaBIOS] alternative: Use paravirt interface for pci windows Vasilis Liaskovitis
2012-09-24  6:35     ` Wen Congyang
2012-09-24 10:46       ` Vasilis Liaskovitis
2012-09-24  6:51   ` [Qemu-devel] [RFC PATCH v3 19/19][SeaBIOS] Calculate pcimem_start and pcimem64_start from SRAT entries Wen Congyang
2012-09-22 14:17 ` [Qemu-devel] [RFC PATCH v3 00/19] ACPI memory hotplug Blue Swirl
2012-10-31 10:58 ` Stefan Hajnoczi
2012-10-31 11:16   ` Avi Kivity
2012-11-01  9:01     ` Vasilis Liaskovitis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1348226255-4226-15-git-send-email-vasilis.liaskovitis@profitbricks.com \
    --to=vasilis.liaskovitis@profitbricks.com \
    --cc=anthony@codemonkey.ws \
    --cc=avi@redhat.com \
    --cc=blauwirbel@gmail.com \
    --cc=eblake@redhat.com \
    --cc=gleb@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=kevin@koconnor.net \
    --cc=kraxel@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=qemu-devel@nongnu.org \
    --cc=seabios@seabios.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).