From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: quintela@redhat.com
Subject: [Qemu-devel] [PATCH 3/9] migration: add qemu_get_fd
Date: Fri, 21 Sep 2012 19:05:00 +0200 [thread overview]
Message-ID: <1348247106-27936-4-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1348247106-27936-1-git-send-email-pbonzini@redhat.com>
Add a callback that lets incoming migration retrieve the file descriptor
for a QEMUFile. This will replace the type-unsafe qemu_stdio_fd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
buffered_file.c | 8 ++++++++
qemu-file.h | 6 ++++++
savevm.c | 27 +++++++++++++++++++++++++++
3 file modificati, 41 inserzioni(+)
diff --git a/buffered_file.c b/buffered_file.c
index 535cdf5..2943f2e 100644
--- a/buffered_file.c
+++ b/buffered_file.c
@@ -173,6 +173,13 @@ static int buffered_close(void *opaque)
* 1: Time to stop
* negative: There has been an error
*/
+static int buffered_get_fd(void *opaque)
+{
+ QEMUFileBuffered *s = opaque;
+
+ return qemu_get_fd(s->file);
+}
+
static int buffered_rate_limit(void *opaque)
{
QEMUFileBuffered *s = opaque;
@@ -234,6 +241,7 @@ static void buffered_rate_tick(void *opaque)
}
static const QEMUFileOps buffered_file_ops = {
+ .get_fd = buffered_get_fd,
.put_buffer = buffered_put_buffer,
.close = buffered_close,
.rate_limit = buffered_rate_limit,
diff --git a/qemu-file.h b/qemu-file.h
index c89e8e0..d552f5d 100644
--- a/qemu-file.h
+++ b/qemu-file.h
@@ -47,6 +47,10 @@ typedef int (QEMUFileGetBufferFunc)(void *opaque, uint8_t *buf,
*/
typedef int (QEMUFileCloseFunc)(void *opaque);
+/* Called to return the OS file descriptor associated to the QEMUFile.
+ */
+typedef int (QEMUFileGetFD)(void *opaque);
+
/* Called to determine if the file has exceeded its bandwidth allocation. The
* bandwidth capping is a soft limit, not a hard limit.
*/
@@ -63,6 +67,7 @@ typedef struct QEMUFileOps {
QEMUFilePutBufferFunc *put_buffer;
QEMUFileGetBufferFunc *get_buffer;
QEMUFileCloseFunc *close;
+ QEMUFileGetFD *get_fd;
QEMUFileRateLimit *rate_limit;
QEMUFileSetRateLimit *set_rate_limit;
QEMUFileGetRateLimit *get_rate_limit;
@@ -74,6 +79,7 @@ QEMUFile *qemu_fdopen(int fd, const char *mode);
QEMUFile *qemu_fopen_socket(int fd);
QEMUFile *qemu_popen(FILE *popen_file, const char *mode);
QEMUFile *qemu_popen_cmd(const char *command, const char *mode);
+int qemu_get_fd(QEMUFile *f);
int qemu_stdio_fd(QEMUFile *f);
int qemu_fclose(QEMUFile *f);
void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, int size);
diff --git a/savevm.c b/savevm.c
index 0751422..334848a 100644
--- a/savevm.c
+++ b/savevm.c
@@ -187,6 +187,13 @@ typedef struct QEMUFileSocket
QEMUFile *file;
} QEMUFileSocket;
+static int socket_get_fd(void *opaque)
+{
+ QEMUFileSocket *s = opaque;
+
+ return s->fd;
+}
+
static int socket_get_buffer(void *opaque, uint8_t *buf, int64_t pos, int size)
{
QEMUFileSocket *s = opaque;
@@ -209,6 +216,13 @@ static int socket_close(void *opaque)
return 0;
}
+static int stdio_get_fd(void *opaque)
+{
+ QEMUFileStdio *s = opaque;
+
+ return fileno(s->stdio_file);
+}
+
static int stdio_put_buffer(void *opaque, const uint8_t *buf, int64_t pos, int size)
{
QEMUFileStdio *s = opaque;
@@ -252,11 +266,13 @@ static int stdio_fclose(void *opaque)
}
static const QEMUFileOps stdio_pipe_read_ops = {
+ .get_fd = stdio_get_fd,
.get_buffer = stdio_get_buffer,
.close = stdio_pclose
};
static const QEMUFileOps stdio_pipe_write_ops = {
+ .get_fd = stdio_get_fd,
.put_buffer = stdio_put_buffer,
.close = stdio_pclose
};
@@ -306,11 +322,13 @@ int qemu_stdio_fd(QEMUFile *f)
}
static const QEMUFileOps stdio_file_read_ops = {
+ .get_fd = stdio_get_fd,
.get_buffer = stdio_get_buffer,
.close = stdio_fclose
};
static const QEMUFileOps stdio_file_write_ops = {
+ .get_fd = stdio_get_fd,
.put_buffer = stdio_put_buffer,
.close = stdio_fclose
};
@@ -344,6 +362,7 @@ fail:
}
static const QEMUFileOps socket_read_ops = {
+ .get_fd = socket_get_fd,
.get_buffer = socket_get_buffer,
.close = socket_close
};
@@ -491,6 +510,14 @@ static void qemu_fill_buffer(QEMUFile *f)
qemu_file_set_error(f, len);
}
+int qemu_get_fd(QEMUFile *f)
+{
+ if (f->ops->get_fd) {
+ return f->ops->get_fd(f->opaque);
+ }
+ return -1;
+}
+
/** Closes the file
*
* Returns negative error value if any error happened on previous operations or
--
1.7.12
next prev parent reply other threads:[~2012-09-21 17:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-21 17:04 [Qemu-devel] [PATCH 0/9] Incoming migration coroutine Paolo Bonzini
2012-09-21 17:04 ` [Qemu-devel] [PATCH 1/9] migration: unify stdio-based QEMUFile operations Paolo Bonzini
2012-09-21 17:04 ` [Qemu-devel] [PATCH 2/9] migration: consolidate QEMUFile methods in a single QEMUFileOps struct Paolo Bonzini
2012-09-21 17:05 ` Paolo Bonzini [this message]
2012-09-21 17:05 ` [Qemu-devel] [PATCH 4/9] migration: replace qemu_stdio_fd with qemu_get_fd Paolo Bonzini
2012-09-21 17:05 ` [Qemu-devel] [PATCH 5/9] migration: clean up server sockets and handlers before invoking process_incoming_migration Paolo Bonzini
2012-09-21 17:05 ` [Qemu-devel] [PATCH 6/9] migration: close socket QEMUFile from socket_close Paolo Bonzini
2012-09-21 17:05 ` [Qemu-devel] [PATCH 7/9] migration: move qemu_fclose to process_incoming_migration Paolo Bonzini
2012-09-21 17:05 ` [Qemu-devel] [PATCH 8/9] migration: handle EAGAIN while reading QEMUFile Paolo Bonzini
2012-09-21 17:05 ` [Qemu-devel] [PATCH 9/9] migration: move process_incoming_migration to a coroutine Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348247106-27936-4-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).