qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 07/19] block: do not parse BDRV_O_CACHE_WB in block drivers
Date: Mon, 24 Sep 2012 16:26:36 +0200	[thread overview]
Message-ID: <1348496808-8159-8-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1348496808-8159-1-git-send-email-kwolf@redhat.com>

From: Jeff Cody <jcody@redhat.com>

Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags,
and in the bs->open_flags.

This patch removes the code, leaving the behaviour behind as if
BDRV_O_CACHE_WB was set.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/iscsi.c     |    4 ----
 block/raw-posix.c |    3 ---
 block/raw-win32.c |    3 ---
 block/rbd.c       |    6 ------
 block/sheepdog.c  |   14 ++++++--------
 5 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/block/iscsi.c b/block/iscsi.c
index 0b96165..70cf700 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -268,10 +268,6 @@ iscsi_aio_writev(BlockDriverState *bs, int64_t sector_num,
     acb->task->xfer_dir = SCSI_XFER_WRITE;
     acb->task->cdb_size = 16;
     acb->task->cdb[0] = 0x8a;
-    if (!(bs->open_flags & BDRV_O_CACHE_WB)) {
-        /* set FUA on writes when cache mode is write through */
-        acb->task->cdb[1] |= 0x04;
-    }
     lba = sector_qemu2lun(sector_num, iscsilun);
     *(uint32_t *)&acb->task->cdb[2]  = htonl(lba >> 32);
     *(uint32_t *)&acb->task->cdb[6]  = htonl(lba & 0xffffffff);
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 155205f..288e7ff 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -202,9 +202,6 @@ static void raw_parse_flags(int bdrv_flags, int *open_flags)
     if ((bdrv_flags & BDRV_O_NOCACHE)) {
         *open_flags |= O_DIRECT;
     }
-    if (!(bdrv_flags & BDRV_O_CACHE_WB)) {
-        *open_flags |= O_DSYNC;
-    }
 }
 
 #ifdef CONFIG_LINUX_AIO
diff --git a/block/raw-win32.c b/block/raw-win32.c
index 335c06a..78c8306 100644
--- a/block/raw-win32.c
+++ b/block/raw-win32.c
@@ -92,9 +92,6 @@ static void raw_parse_flags(int flags, int *access_flags, DWORD *overlapped)
     if (flags & BDRV_O_NOCACHE) {
         *overlapped |= FILE_FLAG_NO_BUFFERING;
     }
-    if (!(flags & BDRV_O_CACHE_WB)) {
-        *overlapped |= FILE_FLAG_WRITE_THROUGH;
-    }
 }
 
 static int raw_open(BlockDriverState *bs, const char *filename, int flags)
diff --git a/block/rbd.c b/block/rbd.c
index 5a0f79f..015a9db 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -487,12 +487,6 @@ static int qemu_rbd_open(BlockDriverState *bs, const char *filename, int flags)
         rados_conf_set(s->cluster, "rbd_cache", "false");
     } else {
         rados_conf_set(s->cluster, "rbd_cache", "true");
-        if (!(flags & BDRV_O_CACHE_WB)) {
-            r = rados_conf_set(s->cluster, "rbd_cache_max_dirty", "0");
-            if (r < 0) {
-                rados_conf_set(s->cluster, "rbd_cache", "false");
-            }
-        }
     }
 
     if (strstr(conf, "conf=") == NULL) {
diff --git a/block/sheepdog.c b/block/sheepdog.c
index e0753ee..4742f8a 100644
--- a/block/sheepdog.c
+++ b/block/sheepdog.c
@@ -1114,14 +1114,12 @@ static int sd_open(BlockDriverState *bs, const char *filename, int flags)
         goto out;
     }
 
-    if (flags & BDRV_O_CACHE_WB) {
-        s->cache_enabled = 1;
-        s->flush_fd = connect_to_sdog(s->addr, s->port);
-        if (s->flush_fd < 0) {
-            error_report("failed to connect");
-            ret = s->flush_fd;
-            goto out;
-        }
+    s->cache_enabled = 1;
+    s->flush_fd = connect_to_sdog(s->addr, s->port);
+    if (s->flush_fd < 0) {
+        error_report("failed to connect");
+        ret = s->flush_fd;
+        goto out;
     }
 
     if (snapid || tag[0] != '\0') {
-- 
1.7.6.5

  parent reply	other threads:[~2012-09-24 14:27 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-24 14:26 [Qemu-devel] [PULL 00/19] Block patches Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 01/19] blockdev: preserve readonly and snapshot states across media changes Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 02/19] block: correctly set the keep_read_only flag Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 03/19] block: make bdrv_set_enable_write_cache() modify open_flags Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 04/19] block: Framework for reopening files safely Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 05/19] block: move aio initialization into a helper function Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 06/19] block: move open flag parsing in raw block drivers to helper functions Kevin Wolf
2012-09-24 14:26 ` Kevin Wolf [this message]
2012-09-24 14:26 ` [Qemu-devel] [PATCH 08/19] block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 09/19] block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 10/19] block: raw-posix image file reopen Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 11/19] block: raw " Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 12/19] block: qed " Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 13/19] block: qcow2 " Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 14/19] block: qcow " Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 15/19] block: vmdk " Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 16/19] block: vdi " Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 17/19] block: vpc " Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 18/19] block: convert bdrv_commit() to use bdrv_reopen() Kevin Wolf
2012-09-24 14:26 ` [Qemu-devel] [PATCH 19/19] block: remove keep_read_only flag from BlockDriverState struct Kevin Wolf
2012-09-25 23:26 ` [Qemu-devel] [PULL 00/19] Block patches Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1348496808-8159-8-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).