From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 2/3] vga: add specs for standard vga
Date: Thu, 27 Sep 2012 09:47:52 +0200 [thread overview]
Message-ID: <1348732073-18986-3-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1348732073-18986-1-git-send-email-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
docs/specs/standard-vga.txt | 64 +++++++++++++++++++++++++++++++++++++++++++
hw/vga-isa.c | 2 +
hw/vga-pci.c | 2 +
3 files changed, 68 insertions(+), 0 deletions(-)
create mode 100644 docs/specs/standard-vga.txt
diff --git a/docs/specs/standard-vga.txt b/docs/specs/standard-vga.txt
new file mode 100644
index 0000000..1cecccd
--- /dev/null
+++ b/docs/specs/standard-vga.txt
@@ -0,0 +1,64 @@
+
+QEMU Standard VGA
+=================
+
+Exists in two variants, for isa and pci.
+
+command line switches:
+ -vga std [ picks isa for -M isapc, otherwise pci ]
+ -device VGA [ pci variant ]
+ -device isa-vga [ isa variant ]
+
+
+PCI spec
+--------
+
+Applies to the pci variant only for obvious reasons.
+
+PCI ID: 1234:1111
+
+PCI Region 0:
+ Framebuffer memory, 16 MB in size (by default).
+ Size is tunable via vga_mem_mb property.
+
+PCI Region 1:
+ Reserved (so we have the option to make the framebuffer bar 64bit).
+
+PCI Region 2:
+ MMIO bar, 4096 bytes in size (qemu 1.3+)
+
+PCI ROM Region:
+ Holds the vgabios (qemu 0.14+).
+
+
+IO ports used
+-------------
+
+03c0 - 03df : standard vga ports
+01ce : bochs vbe interface index port
+01cf : bochs vbe interface data port
+
+
+Memory regions used
+-------------------
+
+0xe0000000 : Framebuffer memory, isa variant only.
+
+The pci variant used to mirror the framebuffer bar here, qemu 0.14+
+stops doing that (except when in -M pc-$old compat mode).
+
+
+MMIO area spec
+--------------
+
+Likewise applies to the pci variant only for obvious reasons.
+
+0000 - 03ff : reserved, for possible virtio extension.
+0400 - 041f : vga ioports (0x3c0 -> 0x3df), remapped 1:1.
+ word access is supported, bytes are written
+ in little endia order (aka index port first),
+ so indexed registers can be updated with a
+ single mmio write (and thus only one vmexit).
+0500 - 0515 : bochs dispi interface registers, mapped flat
+ without index/data ports. Use (index << 1)
+ as offset for (16bit) register access.
diff --git a/hw/vga-isa.c b/hw/vga-isa.c
index d290473..046602b 100644
--- a/hw/vga-isa.c
+++ b/hw/vga-isa.c
@@ -1,6 +1,8 @@
/*
* QEMU ISA VGA Emulator.
*
+ * see docs/specs/standard-vga.txt for virtual hardware specs.
+ *
* Copyright (c) 2003 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
diff --git a/hw/vga-pci.c b/hw/vga-pci.c
index df1a1f1..9b1e3ee 100644
--- a/hw/vga-pci.c
+++ b/hw/vga-pci.c
@@ -1,6 +1,8 @@
/*
* QEMU PCI VGA Emulator.
*
+ * see docs/specs/standard-vga.txt for virtual hardware specs.
+ *
* Copyright (c) 2003 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
--
1.7.1
next prev parent reply other threads:[~2012-09-27 7:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-27 7:47 [Qemu-devel] [PATCH 0/3] vga: add mmio bar Gerd Hoffmann
2012-09-27 7:47 ` [Qemu-devel] [PATCH 1/3] vga: add mmio bar to standard vga Gerd Hoffmann
2012-09-27 7:47 ` Gerd Hoffmann [this message]
2012-09-27 7:47 ` [Qemu-devel] [PATCH 3/3] vga: remove CONFIG_BOCHS_VBE Gerd Hoffmann
2012-10-11 11:43 ` [Qemu-devel] [PATCH 0/3] vga: add mmio bar Gerd Hoffmann
2012-10-13 14:27 ` Blue Swirl
2012-10-15 6:04 ` Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348732073-18986-3-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).