From: Jia Liu <proljc@gmail.com>
To: qemu-devel@nongnu.org
Cc: aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH v9 05/14] target-mips-ase-dsp: Add load instructions
Date: Thu, 27 Sep 2012 21:24:42 +0800 [thread overview]
Message-ID: <1348752291-6041-6-git-send-email-proljc@gmail.com> (raw)
In-Reply-To: <1348752291-6041-1-git-send-email-proljc@gmail.com>
Add MIPS ASE DSP Load instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
---
target-mips/translate.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 4103f24..6d5c475 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -313,6 +313,9 @@ enum {
OPC_MODU_G_2E = 0x23 | OPC_SPECIAL3,
OPC_DMOD_G_2E = 0x26 | OPC_SPECIAL3,
OPC_DMODU_G_2E = 0x27 | OPC_SPECIAL3,
+
+ /* MIPS DSP Load */
+ OPC_LX_DSP = 0x0A | OPC_SPECIAL3,
};
/* BSHFL opcodes */
@@ -340,6 +343,17 @@ enum {
#endif
};
+#define MASK_LX(op) (MASK_SPECIAL3(op) | (op & (0x1F << 6)))
+/* MIPS DSP Load */
+enum {
+ OPC_LBUX = (0x06 << 6) | OPC_LX_DSP,
+ OPC_LHX = (0x04 << 6) | OPC_LX_DSP,
+ OPC_LWX = (0x00 << 6) | OPC_LX_DSP,
+#if defined(TARGET_MIPS64)
+ OPC_LDX = (0x08 << 6) | OPC_LX_DSP,
+#endif
+};
+
/* Coprocessor 0 (rs field) */
#define MASK_CP0(op) MASK_OP_MAJOR(op) | (op & (0x1F << 21))
@@ -12213,6 +12227,58 @@ static int decode_micromips_opc (CPUMIPSState *env, DisasContext *ctx, int *is_b
#endif
+/* MIPSDSP functions. */
+static void gen_mipsdsp_ld(CPUMIPSState *env, DisasContext *ctx, uint32_t opc,
+ int rd, int base, int offset)
+{
+ const char *opn = "ldx";
+ TCGv t0;
+
+ if (rd == 0 && env->insn_flags & (ASE_DSP | ASE_DSPR2)) {
+ /* Loongson CPU uses a load to zero register for prefetch.
+ We emulate it as a NOP. On other CPU we must perform the
+ actual memory access. */
+ MIPS_DEBUG("NOP");
+ return;
+ }
+
+ t0 = tcg_temp_new();
+ gen_op_addr_add(ctx, t0, cpu_gpr[base], cpu_gpr[offset]);
+ save_cpu_state(ctx, 0);
+
+ switch (opc) {
+ case OPC_LBUX:
+ op_ld_lbu(t0, t0, ctx);
+ gen_store_gpr(t0, rd);
+ opn = "lbux";
+ break;
+ case OPC_LHX:
+ op_ld_lh(t0, t0, ctx);
+ gen_store_gpr(t0, rd);
+ opn = "lhx";
+ break;
+ case OPC_LWX:
+ op_ld_lw(t0, t0, ctx);
+ gen_store_gpr(t0, rd);
+ opn = "lwx";
+ break;
+#if defined(TARGET_MIPS64)
+ case OPC_LDX:
+ op_ld_ld(t0, t0, ctx);
+ gen_store_gpr(t0, rd);
+ opn = "ldx";
+ break;
+#endif
+ }
+ (void)opn; /* avoid a compiler warning */
+ MIPS_DEBUG("%s %s, %s(%s)", opn,
+ regnames[rd], regnames[offset], regnames[base]);
+ tcg_temp_free(t0);
+}
+
+
+/* End MIPSDSP functions. */
+
static void decode_opc (CPUMIPSState *env, DisasContext *ctx, int *is_branch)
{
int32_t offset;
@@ -12568,6 +12634,24 @@ static void decode_opc (CPUMIPSState *env, DisasContext *ctx, int *is_branch)
check_insn(env, ctx, INSN_LOONGSON2E);
gen_loongson_integer(ctx, op1, rd, rs, rt);
break;
+ case OPC_LX_DSP:
+ check_dsp(ctx);
+ op2 = MASK_LX(ctx->opcode);
+ switch (op2) {
+#if defined(TARGET_MIPS64)
+ case OPC_LDX:
+#endif
+ case OPC_LBUX:
+ case OPC_LHX:
+ case OPC_LWX:
+ gen_mipsdsp_ld(env, ctx, op2, rd, rs, rt);
+ break;
+ default: /* Invalid */
+ MIPS_INVAL("MASK LX");
+ generate_exception(ctx, EXCP_RI);
+ break;
+ }
+ break;
#if defined(TARGET_MIPS64)
case OPC_DEXTM ... OPC_DEXT:
case OPC_DINSM ... OPC_DINS:
--
1.7.10.2 (Apple Git-33)
next prev parent reply other threads:[~2012-09-27 13:25 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-27 13:24 [Qemu-devel] [PATCH v9 00/14] QEMU MIPS ASE DSP support Jia Liu
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 01/14] target-mips-ase-dsp: Add internal funtions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 02/14] target-mips-ase-dsp: Add dsp resources access check Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 03/14] target-mips-ase-dsp: Use correct acc value to index cpu_HI/cpu_LO rather than using a fix number Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 04/14] target-mips-ase-dsp: Add branch instructions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` Jia Liu [this message]
2012-10-06 14:51 ` [Qemu-devel] [PATCH v9 05/14] target-mips-ase-dsp: Add load instructions Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 06/14] target-mips-ase-dsp: Add arithmetic instructions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 07/14] target-mips-ase-dsp: Add GPR-based shift instructions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 08/14] target-mips-ase-dsp: Add multiply instructions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 09/14] target-mips-ase-dsp: Add bit/manipulation instructions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 10/14] target-mips-ase-dsp: Add compare-pick instructions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 11/14] target-mips-ase-dsp: Add DSP accumulator instructions Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 12/14] target-mips-ase-dsp: Add MIPS DSP processors Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 13/14] target-mips-ase-dsp: Add testcases Jia Liu
2012-10-06 14:51 ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 14/14] target-mips-ase-dsp: Change TODO file Jia Liu
2012-10-06 14:52 ` Aurelien Jarno
2012-10-06 2:33 ` [Qemu-devel] [PATCH v9 00/14] QEMU MIPS ASE DSP support Jia Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348752291-6041-6-git-send-email-proljc@gmail.com \
--to=proljc@gmail.com \
--cc=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).