qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
* [Qemu-devel] [PATCH] Make target_phys_addr_t 64 bits unconditionally
@ 2012-10-04 10:07 Avi Kivity
  2012-10-04 10:23 ` Michael Tokarev
  0 siblings, 1 reply; 3+ messages in thread
From: Avi Kivity @ 2012-10-04 10:07 UTC (permalink / raw)
  To: Blue Swirl, Anthony Liguori, qemu-devel

The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations.  Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 .gitignore              |  1 +
 Makefile                |  2 +-
 Makefile.hw             |  1 -
 Makefile.target         |  3 ---
 configure               | 34 ++++------------------------------
 cpu-common.h            |  2 +-
 dma.h                   |  2 +-
 hw/hw.h                 |  2 +-
 hw/intel-hda.c          |  8 +-------
 hw/rtl8139.c            |  6 +-----
 monitor.c               |  4 ----
 target-ppc/mmu_helper.c |  4 +---
 targphys.h              | 19 +------------------
 13 files changed, 13 insertions(+), 75 deletions(-)

diff --git a/.gitignore b/.gitignore
index 824c0d2..3ef77d0 100644
--- a/.gitignore
+++ b/.gitignore
@@ -12,6 +12,7 @@ trace-dtrace.dtrace
 *-linux-user
 *-bsd-user
 libdis*
+libhw
 libhw32
 libhw64
 libuser
diff --git a/Makefile b/Makefile
index 0464297..1cebe3a 100644
--- a/Makefile
+++ b/Makefile
@@ -214,7 +214,7 @@ $(qga-obj-y) qemu-ga.o: $(QGALIB_GEN)
 
 qemu-ga$(EXESUF): qemu-ga.o $(qga-obj-y) $(tools-obj-y) $(qapi-obj-y) $(qobject-obj-y) $(version-obj-y)
 
-QEMULIBS=libhw32 libhw64 libuser libdis libdis-user
+QEMULIBS=libhw libuser libdis libdis-user
 
 clean:
 # avoid old build problems by removing potentially incorrect old files
diff --git a/Makefile.hw b/Makefile.hw
index 59f5b48..86f0bf4 100644
--- a/Makefile.hw
+++ b/Makefile.hw
@@ -2,7 +2,6 @@
 
 include ../config-host.mak
 include ../config-all-devices.mak
-include config.mak
 include $(SRC_PATH)/rules.mak
 
 .PHONY: all
diff --git a/Makefile.target b/Makefile.target
index d9d54b8..4449444 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -4,9 +4,6 @@ include ../config-host.mak
 include config-devices.mak
 include config-target.mak
 include $(SRC_PATH)/rules.mak
-ifneq ($(HWDIR),)
-include $(HWDIR)/config.mak
-endif
 
 $(call set-vpath, $(SRC_PATH))
 ifdef CONFIG_LINUX
diff --git a/configure b/configure
index 8f99b7b..65bd876 100755
--- a/configure
+++ b/configure
@@ -3694,7 +3694,6 @@ TARGET_ABI_DIR=""
 
 case "$target_arch2" in
   i386)
-    target_phys_bits=64
   ;;
   x86_64)
     TARGET_BASE_ARCH=i386
@@ -3702,7 +3701,6 @@ case "$target_arch2" in
     target_long_alignment=8
   ;;
   alpha)
-    target_phys_bits=64
     target_long_alignment=8
     target_nptl="yes"
   ;;
@@ -3711,22 +3709,18 @@ case "$target_arch2" in
     bflt="yes"
     target_nptl="yes"
     gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
-    target_phys_bits=64
     target_llong_alignment=4
     target_libs_softmmu="$fdt_libs"
   ;;
   cris)
     target_nptl="yes"
-    target_phys_bits=32
   ;;
   lm32)
-    target_phys_bits=32
     target_libs_softmmu="$opengl_libs"
   ;;
   m68k)
     bflt="yes"
     gdb_xml_files="cf-core.xml cf-fp.xml"
-    target_phys_bits=32
     target_int_alignment=2
     target_long_alignment=2
     target_llong_alignment=2
@@ -3735,36 +3729,30 @@ case "$target_arch2" in
     TARGET_ARCH=microblaze
     bflt="yes"
     target_nptl="yes"
-    target_phys_bits=32
     target_libs_softmmu="$fdt_libs"
   ;;
   mips|mipsel)
     TARGET_ARCH=mips
     echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
     target_nptl="yes"
-    target_phys_bits=64
   ;;
   mipsn32|mipsn32el)
     TARGET_ARCH=mipsn32
     TARGET_BASE_ARCH=mips
     echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
-    target_phys_bits=64
   ;;
   mips64|mips64el)
     TARGET_ARCH=mips64
     TARGET_BASE_ARCH=mips
     echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
-    target_phys_bits=64
     target_long_alignment=8
   ;;
   or32)
     TARGET_ARCH=openrisc
     TARGET_BASE_ARCH=openrisc
-    target_phys_bits=32
   ;;
   ppc)
     gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
-    target_phys_bits=64
     target_nptl="yes"
     target_libs_softmmu="$fdt_libs"
   ;;
@@ -3772,7 +3760,6 @@ case "$target_arch2" in
     TARGET_BASE_ARCH=ppc
     TARGET_ABI_DIR=ppc
     gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
-    target_phys_bits=64
     target_nptl="yes"
     target_libs_softmmu="$fdt_libs"
   ;;
@@ -3780,7 +3767,6 @@ case "$target_arch2" in
     TARGET_BASE_ARCH=ppc
     TARGET_ABI_DIR=ppc
     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
-    target_phys_bits=64
     target_long_alignment=8
     target_libs_softmmu="$fdt_libs"
   ;;
@@ -3790,21 +3776,17 @@ case "$target_arch2" in
     TARGET_ABI_DIR=ppc
     echo "TARGET_ABI32=y" >> $config_target_mak
     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
-    target_phys_bits=64
     target_libs_softmmu="$fdt_libs"
   ;;
   sh4|sh4eb)
     TARGET_ARCH=sh4
     bflt="yes"
     target_nptl="yes"
-    target_phys_bits=32
   ;;
   sparc)
-    target_phys_bits=64
   ;;
   sparc64)
     TARGET_BASE_ARCH=sparc
-    target_phys_bits=64
     target_long_alignment=8
   ;;
   sparc32plus)
@@ -3812,11 +3794,9 @@ case "$target_arch2" in
     TARGET_BASE_ARCH=sparc
     TARGET_ABI_DIR=sparc
     echo "TARGET_ABI32=y" >> $config_target_mak
-    target_phys_bits=64
   ;;
   s390x)
     target_nptl="yes"
-    target_phys_bits=64
     target_long_alignment=8
   ;;
   unicore32)
@@ -3824,7 +3804,6 @@ case "$target_arch2" in
   ;;
   xtensa|xtensaeb)
     TARGET_ARCH=xtensa
-    target_phys_bits=32
   ;;
   *)
     echo "Unsupported target CPU"
@@ -3859,7 +3838,6 @@ echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
 case "$target_arch2" in
   i386|x86_64)
     if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
-      target_phys_bits=64
       echo "CONFIG_XEN=y" >> $config_target_mak
       if test "$xen_pci_passthrough" = yes; then
         echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
@@ -3899,11 +3877,10 @@ if test "$target_bigendian" = "yes" ; then
   echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
 fi
 if test "$target_softmmu" = "yes" ; then
-  echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_target_mak
   echo "CONFIG_SOFTMMU=y" >> $config_target_mak
   echo "LIBS+=$libs_softmmu $target_libs_softmmu" >> $config_target_mak
-  echo "HWDIR=../libhw$target_phys_bits" >> $config_target_mak
-  echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
+  echo "HWDIR=../libhw" >> $config_target_mak
+  echo "subdir-$target: subdir-libhw" >> $config_host_mak
   if test "$smartcard_nss" = "yes" ; then
     echo "subdir-$target: subdir-libcacard" >> $config_host_mak
   fi
@@ -4145,11 +4122,8 @@ for rom in seabios vgabios ; do
     echo "LD=$ld" >> $config_mak
 done
 
-for hwlib in 32 64; do
-  d=libhw$hwlib
-  symlink "$source_path/Makefile.hw" "$d/Makefile"
-  echo "QEMU_CFLAGS+=-DTARGET_PHYS_ADDR_BITS=$hwlib" > $d/config.mak
-done
+d=libhw
+symlink "$source_path/Makefile.hw" "$d/Makefile"
 
 d=libuser
 symlink "$source_path/Makefile.user" "$d/Makefile"
diff --git a/cpu-common.h b/cpu-common.h
index 85548de..c0d27af 100644
--- a/cpu-common.h
+++ b/cpu-common.h
@@ -21,7 +21,7 @@ enum device_endian {
 };
 
 /* address in the RAM (different from a physical address) */
-#if defined(CONFIG_XEN_BACKEND) && TARGET_PHYS_ADDR_BITS == 64
+#if defined(CONFIG_XEN_BACKEND)
 typedef uint64_t ram_addr_t;
 #  define RAM_ADDR_MAX UINT64_MAX
 #  define RAM_ADDR_FMT "%" PRIx64
diff --git a/dma.h b/dma.h
index f35c4b6..1a33603 100644
--- a/dma.h
+++ b/dma.h
@@ -31,7 +31,7 @@ struct QEMUSGList {
     DMAContext *dma;
 };
 
-#if defined(TARGET_PHYS_ADDR_BITS)
+#ifndef CONFIG_USER_ONLY
 
 /*
  * When an IOMMU is present, bus addresses become distinct from
diff --git a/hw/hw.h b/hw/hw.h
index e5cb9bf..16101de 100644
--- a/hw/hw.h
+++ b/hw/hw.h
@@ -4,7 +4,7 @@
 
 #include "qemu-common.h"
 
-#if defined(TARGET_PHYS_ADDR_BITS) && !defined(NEED_CPU_H)
+#if !defined(CONFIG_USER_ONLY) && !defined(NEED_CPU_H)
 #include "cpu-common.h"
 #endif
 
diff --git a/hw/intel-hda.c b/hw/intel-hda.c
index 127e818..d8e1b23 100644
--- a/hw/intel-hda.c
+++ b/hw/intel-hda.c
@@ -210,13 +210,7 @@ static target_phys_addr_t intel_hda_addr(uint32_t lbase, uint32_t ubase)
 {
     target_phys_addr_t addr;
 
-#if TARGET_PHYS_ADDR_BITS == 32
-    addr = lbase;
-#else
-    addr = ubase;
-    addr <<= 32;
-    addr |= lbase;
-#endif
+    addr = ((uint64_t)ubase << 32) | lbase;
     return addr;
 }
 
diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index 844f1b8..b7c82ee 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -774,11 +774,7 @@ static void rtl8139_write_buffer(RTL8139State *s, const void *buf, int size)
 #define MIN_BUF_SIZE 60
 static inline dma_addr_t rtl8139_addr64(uint32_t low, uint32_t high)
 {
-#if TARGET_PHYS_ADDR_BITS > 32
-    return low | ((target_phys_addr_t)high << 32);
-#else
-    return low;
-#endif
+    return low | ((uint64_t)high << 32);
 }
 
 /* Workaround for buggy guest driver such as linux who allocates rx
diff --git a/monitor.c b/monitor.c
index 67064e2..7beac9a 100644
--- a/monitor.c
+++ b/monitor.c
@@ -3259,11 +3259,7 @@ static int64_t expr_unary(Monitor *mon)
         break;
     default:
         errno = 0;
-#if TARGET_PHYS_ADDR_BITS > 32
         n = strtoull(pch, &p, 0);
-#else
-        n = strtoul(pch, &p, 0);
-#endif
         if (errno == ERANGE) {
             expr_error(mon, "number too large");
         }
diff --git a/target-ppc/mmu_helper.c b/target-ppc/mmu_helper.c
index d2664ac..532b114 100644
--- a/target-ppc/mmu_helper.c
+++ b/target-ppc/mmu_helper.c
@@ -1032,12 +1032,10 @@ static int ppcemb_tlb_check(CPUPPCState *env, ppcemb_tlb_t *tlb,
         return -1;
     }
     *raddrp = (tlb->RPN & mask) | (address & ~mask);
-#if (TARGET_PHYS_ADDR_BITS >= 36)
     if (ext) {
         /* Extend the physical address to 36 bits */
-        *raddrp |= (target_phys_addr_t)(tlb->RPN & 0xF) << 32;
+        *raddrp |= (uint64_t)(tlb->RPN & 0xF) << 32;
     }
-#endif
 
     return 0;
 }
diff --git a/targphys.h b/targphys.h
index bd4938f..08cade9 100644
--- a/targphys.h
+++ b/targphys.h
@@ -3,25 +3,10 @@
 #ifndef TARGPHYS_H
 #define TARGPHYS_H
 
-#ifdef TARGET_PHYS_ADDR_BITS
+#define TARGET_PHYS_ADDR_BITS 64
 /* target_phys_addr_t is the type of a physical address (its size can
    be different from 'target_ulong').  */
 
-#if TARGET_PHYS_ADDR_BITS == 32
-typedef uint32_t target_phys_addr_t;
-#define TARGET_PHYS_ADDR_MAX UINT32_MAX
-#define TARGET_FMT_plx "%08x"
-/* Format strings for printing target_phys_addr_t types.
- * These are recommended over the less flexible TARGET_FMT_plx,
- * which is retained for the benefit of existing code.
- */
-#define TARGET_PRIdPHYS PRId32
-#define TARGET_PRIiPHYS PRIi32
-#define TARGET_PRIoPHYS PRIo32
-#define TARGET_PRIuPHYS PRIu32
-#define TARGET_PRIxPHYS PRIx32
-#define TARGET_PRIXPHYS PRIX32
-#elif TARGET_PHYS_ADDR_BITS == 64
 typedef uint64_t target_phys_addr_t;
 #define TARGET_PHYS_ADDR_MAX UINT64_MAX
 #define TARGET_FMT_plx "%016" PRIx64
@@ -31,7 +16,5 @@ typedef uint64_t target_phys_addr_t;
 #define TARGET_PRIuPHYS PRIu64
 #define TARGET_PRIxPHYS PRIx64
 #define TARGET_PRIXPHYS PRIX64
-#endif
-#endif
 
 #endif
-- 
1.7.12

^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-10-04 10:28 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-04 10:07 [Qemu-devel] [PATCH] Make target_phys_addr_t 64 bits unconditionally Avi Kivity
2012-10-04 10:23 ` Michael Tokarev
2012-10-04 10:28   ` Peter Maydell

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).