From: Jia Liu <proljc@gmail.com>
To: qemu-devel@nongnu.org
Cc: aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH v11 03/14] target-mips: Use correct acc value to index cpu_HI/cpu_LO rather than using a fix number
Date: Tue, 16 Oct 2012 00:39:07 +0800 [thread overview]
Message-ID: <1350319158-7263-4-git-send-email-proljc@gmail.com> (raw)
In-Reply-To: <1350319158-7263-1-git-send-email-proljc@gmail.com>
Use correct acc value to index cpu_HI/cpu_LO rather than using a fix number.
Signed-off-by: Jia Liu <proljc@gmail.com>
---
target-mips/translate.c | 122 ++++++++++++++++++++++++++++++++++++-----------
1 file changed, 95 insertions(+), 27 deletions(-)
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 8b6ebbc..b023d6f 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -5,6 +5,7 @@
* Copyright (c) 2006 Marius Groeger (FPU operations)
* Copyright (c) 2006 Thiemo Seufer (MIPS32R2 support)
* Copyright (c) 2009 CodeSourcery (MIPS16 and microMIPS support)
+ * Copyright (c) 2012 Jia Liu & Dongxue Zhang (MIPS ASE DSP support)
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
@@ -2113,33 +2114,75 @@ static void gen_shift (CPUMIPSState *env, DisasContext *ctx, uint32_t opc,
static void gen_HILO (DisasContext *ctx, uint32_t opc, int reg)
{
const char *opn = "hilo";
+ unsigned int acc;
if (reg == 0 && (opc == OPC_MFHI || opc == OPC_MFLO)) {
/* Treat as NOP. */
MIPS_DEBUG("NOP");
return;
}
+
+ if (opc == OPC_MFHI || opc == OPC_MFLO) {
+ acc = ((ctx->opcode) >> 21) & 0x03;
+ } else {
+ acc = ((ctx->opcode) >> 11) & 0x03;
+ }
+
+ if (acc != 0) {
+ check_dsp(ctx);
+ }
+
switch (opc) {
case OPC_MFHI:
- tcg_gen_mov_tl(cpu_gpr[reg], cpu_HI[0]);
+#if defined(TARGET_MIPS64)
+ if (acc != 0) {
+ tcg_gen_ext32s_tl(cpu_gpr[reg], cpu_HI[acc]);
+ } else
+#endif
+ {
+ tcg_gen_mov_tl(cpu_gpr[reg], cpu_HI[acc]);
+ }
opn = "mfhi";
break;
case OPC_MFLO:
- tcg_gen_mov_tl(cpu_gpr[reg], cpu_LO[0]);
+#if defined(TARGET_MIPS64)
+ if (acc != 0) {
+ tcg_gen_ext32s_tl(cpu_gpr[reg], cpu_LO[acc]);
+ } else
+#endif
+ {
+ tcg_gen_mov_tl(cpu_gpr[reg], cpu_LO[acc]);
+ }
opn = "mflo";
break;
case OPC_MTHI:
- if (reg != 0)
- tcg_gen_mov_tl(cpu_HI[0], cpu_gpr[reg]);
- else
- tcg_gen_movi_tl(cpu_HI[0], 0);
+ if (reg != 0) {
+#if defined(TARGET_MIPS64)
+ if (acc != 0) {
+ tcg_gen_ext32s_tl(cpu_HI[acc], cpu_gpr[reg]);
+ } else
+#endif
+ {
+ tcg_gen_mov_tl(cpu_HI[acc], cpu_gpr[reg]);
+ }
+ } else {
+ tcg_gen_movi_tl(cpu_HI[acc], 0);
+ }
opn = "mthi";
break;
case OPC_MTLO:
- if (reg != 0)
- tcg_gen_mov_tl(cpu_LO[0], cpu_gpr[reg]);
- else
- tcg_gen_movi_tl(cpu_LO[0], 0);
+ if (reg != 0) {
+#if defined(TARGET_MIPS64)
+ if (acc != 0) {
+ tcg_gen_ext32s_tl(cpu_LO[acc], cpu_gpr[reg]);
+ } else
+#endif
+ {
+ tcg_gen_mov_tl(cpu_LO[acc], cpu_gpr[reg]);
+ }
+ } else {
+ tcg_gen_movi_tl(cpu_LO[acc], 0);
+ }
opn = "mtlo";
break;
}
@@ -2152,6 +2195,7 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
{
const char *opn = "mul/div";
TCGv t0, t1;
+ unsigned int acc;
switch (opc) {
case OPC_DIV:
@@ -2214,6 +2258,10 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
{
TCGv_i64 t2 = tcg_temp_new_i64();
TCGv_i64 t3 = tcg_temp_new_i64();
+ acc = ((ctx->opcode) >> 11) & 0x03;
+ if (acc != 0) {
+ check_dsp(ctx);
+ }
tcg_gen_ext_tl_i64(t2, t0);
tcg_gen_ext_tl_i64(t3, t1);
@@ -2223,8 +2271,8 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
tcg_gen_shri_i64(t2, t2, 32);
tcg_gen_trunc_i64_tl(t1, t2);
tcg_temp_free_i64(t2);
- tcg_gen_ext32s_tl(cpu_LO[0], t0);
- tcg_gen_ext32s_tl(cpu_HI[0], t1);
+ tcg_gen_ext32s_tl(cpu_LO[acc], t0);
+ tcg_gen_ext32s_tl(cpu_HI[acc], t1);
}
opn = "mult";
break;
@@ -2232,6 +2280,10 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
{
TCGv_i64 t2 = tcg_temp_new_i64();
TCGv_i64 t3 = tcg_temp_new_i64();
+ acc = ((ctx->opcode) >> 11) & 0x03;
+ if (acc != 0) {
+ check_dsp(ctx);
+ }
tcg_gen_ext32u_tl(t0, t0);
tcg_gen_ext32u_tl(t1, t1);
@@ -2243,8 +2295,8 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
tcg_gen_shri_i64(t2, t2, 32);
tcg_gen_trunc_i64_tl(t1, t2);
tcg_temp_free_i64(t2);
- tcg_gen_ext32s_tl(cpu_LO[0], t0);
- tcg_gen_ext32s_tl(cpu_HI[0], t1);
+ tcg_gen_ext32s_tl(cpu_LO[acc], t0);
+ tcg_gen_ext32s_tl(cpu_HI[acc], t1);
}
opn = "multu";
break;
@@ -2291,41 +2343,49 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
{
TCGv_i64 t2 = tcg_temp_new_i64();
TCGv_i64 t3 = tcg_temp_new_i64();
+ acc = ((ctx->opcode) >> 11) & 0x03;
+ if (acc != 0) {
+ check_dsp(ctx);
+ }
tcg_gen_ext_tl_i64(t2, t0);
tcg_gen_ext_tl_i64(t3, t1);
tcg_gen_mul_i64(t2, t2, t3);
- tcg_gen_concat_tl_i64(t3, cpu_LO[0], cpu_HI[0]);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
tcg_gen_add_i64(t2, t2, t3);
tcg_temp_free_i64(t3);
tcg_gen_trunc_i64_tl(t0, t2);
tcg_gen_shri_i64(t2, t2, 32);
tcg_gen_trunc_i64_tl(t1, t2);
tcg_temp_free_i64(t2);
- tcg_gen_ext32s_tl(cpu_LO[0], t0);
- tcg_gen_ext32s_tl(cpu_HI[0], t1);
+ tcg_gen_ext32s_tl(cpu_LO[acc], t0);
+ tcg_gen_ext32s_tl(cpu_HI[acc], t1);
}
opn = "madd";
break;
case OPC_MADDU:
- {
+ {
TCGv_i64 t2 = tcg_temp_new_i64();
TCGv_i64 t3 = tcg_temp_new_i64();
+ acc = ((ctx->opcode) >> 11) & 0x03;
+ if (acc != 0) {
+ check_dsp(ctx);
+ }
tcg_gen_ext32u_tl(t0, t0);
tcg_gen_ext32u_tl(t1, t1);
tcg_gen_extu_tl_i64(t2, t0);
tcg_gen_extu_tl_i64(t3, t1);
tcg_gen_mul_i64(t2, t2, t3);
- tcg_gen_concat_tl_i64(t3, cpu_LO[0], cpu_HI[0]);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
tcg_gen_add_i64(t2, t2, t3);
tcg_temp_free_i64(t3);
tcg_gen_trunc_i64_tl(t0, t2);
tcg_gen_shri_i64(t2, t2, 32);
tcg_gen_trunc_i64_tl(t1, t2);
tcg_temp_free_i64(t2);
- tcg_gen_ext32s_tl(cpu_LO[0], t0);
- tcg_gen_ext32s_tl(cpu_HI[0], t1);
+ tcg_gen_ext32s_tl(cpu_LO[acc], t0);
+ tcg_gen_ext32s_tl(cpu_HI[acc], t1);
}
opn = "maddu";
break;
@@ -2333,19 +2393,23 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
{
TCGv_i64 t2 = tcg_temp_new_i64();
TCGv_i64 t3 = tcg_temp_new_i64();
+ acc = ((ctx->opcode) >> 11) & 0x03;
+ if (acc != 0) {
+ check_dsp(ctx);
+ }
tcg_gen_ext_tl_i64(t2, t0);
tcg_gen_ext_tl_i64(t3, t1);
tcg_gen_mul_i64(t2, t2, t3);
- tcg_gen_concat_tl_i64(t3, cpu_LO[0], cpu_HI[0]);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
tcg_gen_sub_i64(t2, t3, t2);
tcg_temp_free_i64(t3);
tcg_gen_trunc_i64_tl(t0, t2);
tcg_gen_shri_i64(t2, t2, 32);
tcg_gen_trunc_i64_tl(t1, t2);
tcg_temp_free_i64(t2);
- tcg_gen_ext32s_tl(cpu_LO[0], t0);
- tcg_gen_ext32s_tl(cpu_HI[0], t1);
+ tcg_gen_ext32s_tl(cpu_LO[acc], t0);
+ tcg_gen_ext32s_tl(cpu_HI[acc], t1);
}
opn = "msub";
break;
@@ -2353,21 +2417,25 @@ static void gen_muldiv (DisasContext *ctx, uint32_t opc,
{
TCGv_i64 t2 = tcg_temp_new_i64();
TCGv_i64 t3 = tcg_temp_new_i64();
+ acc = ((ctx->opcode) >> 11) & 0x03;
+ if (acc != 0) {
+ check_dsp(ctx);
+ }
tcg_gen_ext32u_tl(t0, t0);
tcg_gen_ext32u_tl(t1, t1);
tcg_gen_extu_tl_i64(t2, t0);
tcg_gen_extu_tl_i64(t3, t1);
tcg_gen_mul_i64(t2, t2, t3);
- tcg_gen_concat_tl_i64(t3, cpu_LO[0], cpu_HI[0]);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
tcg_gen_sub_i64(t2, t3, t2);
tcg_temp_free_i64(t3);
tcg_gen_trunc_i64_tl(t0, t2);
tcg_gen_shri_i64(t2, t2, 32);
tcg_gen_trunc_i64_tl(t1, t2);
tcg_temp_free_i64(t2);
- tcg_gen_ext32s_tl(cpu_LO[0], t0);
- tcg_gen_ext32s_tl(cpu_HI[0], t1);
+ tcg_gen_ext32s_tl(cpu_LO[acc], t0);
+ tcg_gen_ext32s_tl(cpu_HI[acc], t1);
}
opn = "msubu";
break;
--
1.7.10.2 (Apple Git-33)
next prev parent reply other threads:[~2012-10-15 16:40 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-15 16:39 [Qemu-devel] [PATCH v11 00/14] QEMU MIPS ASE DSP support Jia Liu
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 01/14] target-mips: Add ASE DSP internal functions Jia Liu
2012-10-16 23:20 ` Aurelien Jarno
2012-10-17 3:39 ` Jia Liu
2012-10-17 15:15 ` Aurelien Jarno
2012-10-18 1:53 ` Jia Liu
2012-10-18 6:05 ` Aurelien Jarno
2012-10-18 11:18 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 02/14] target-mips: Add ASE DSP resources access check Jia Liu
2012-10-16 23:21 ` Aurelien Jarno
2012-10-15 16:39 ` Jia Liu [this message]
2012-10-16 23:21 ` [Qemu-devel] [PATCH v11 03/14] target-mips: Use correct acc value to index cpu_HI/cpu_LO rather than using a fix number Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 04/14] target-mips: Add ASE DSP branch instructions Jia Liu
2012-10-16 23:21 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 05/14] target-mips: Add ASE DSP load instructions Jia Liu
2012-10-16 23:21 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 06/14] target-mips: Add ASE DSP arithmetic instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-17 4:05 ` Jia Liu
2012-10-17 4:54 ` Jia Liu
2012-10-17 6:05 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 07/14] target-mips: Add ASE DSP GPR based shift instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-30 14:47 ` Jia Liu
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 08/14] target-mips: Add ASE DSP multiply instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 09/14] target-mips: Add ASE DSP bit/manipulation instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-17 3:44 ` Jia Liu
2012-10-17 6:05 ` Aurelien Jarno
2012-10-17 7:16 ` Richard Henderson
2012-10-17 20:07 ` Aurelien Jarno
2012-10-18 0:09 ` Jia Liu
2012-10-17 7:41 ` Jia Liu
2012-10-17 15:15 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 10/14] target-mips: Add ASE DSP compare-pick instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 11/14] target-mips: Add ASE DSP accumulator instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 12/14] target-mips: Add ASE DSP processors Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 13/14] target-mips: Add ASE DSP testcases Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 14/14] target-mips: Change TODO file Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350319158-7263-4-git-send-email-proljc@gmail.com \
--to=proljc@gmail.com \
--cc=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).