From: Jia Liu <proljc@gmail.com>
To: qemu-devel@nongnu.org
Cc: aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH v11 04/14] target-mips: Add ASE DSP branch instructions
Date: Tue, 16 Oct 2012 00:39:08 +0800 [thread overview]
Message-ID: <1350319158-7263-5-git-send-email-proljc@gmail.com> (raw)
In-Reply-To: <1350319158-7263-1-git-send-email-proljc@gmail.com>
Add MIPS ASE DSP Branch instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
---
target-mips/translate.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/target-mips/translate.c b/target-mips/translate.c
index b023d6f..f1e5bb0 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -332,6 +332,14 @@ enum {
OPC_DSHD = (0x05 << 6) | OPC_DBSHFL,
};
+/* MIPS DSP REGIMM opcodes */
+enum {
+ OPC_BPOSGE32 = (0x1C << 16) | OPC_REGIMM,
+#if defined(TARGET_MIPS64)
+ OPC_BPOSGE64 = (0x1D << 16) | OPC_REGIMM,
+#endif
+};
+
/* Coprocessor 0 (rs field) */
#define MASK_CP0(op) MASK_OP_MAJOR(op) | (op & (0x1F << 21))
@@ -3224,6 +3232,16 @@ static void gen_compute_branch (DisasContext *ctx, uint32_t opc,
}
btgt = ctx->pc + insn_bytes + offset;
break;
+ case OPC_BPOSGE32:
+#if defined(TARGET_MIPS64)
+ case OPC_BPOSGE64:
+ tcg_gen_andi_tl(t0, cpu_dspctrl, 0x7F);
+#else
+ tcg_gen_andi_tl(t0, cpu_dspctrl, 0x3F);
+#endif
+ bcond_compute = 1;
+ btgt = ctx->pc + insn_bytes + offset;
+ break;
case OPC_J:
case OPC_JAL:
case OPC_JALX:
@@ -3412,6 +3430,16 @@ static void gen_compute_branch (DisasContext *ctx, uint32_t opc,
tcg_gen_setcondi_tl(TCG_COND_LT, bcond, t0, 0);
MIPS_DEBUG("bltzl %s, " TARGET_FMT_lx, regnames[rs], btgt);
goto likely;
+ case OPC_BPOSGE32:
+ tcg_gen_setcondi_tl(TCG_COND_GE, bcond, t0, 32);
+ MIPS_DEBUG("bposge32 " TARGET_FMT_lx, btgt);
+ goto not_likely;
+#if defined(TARGET_MIPS64)
+ case OPC_BPOSGE64:
+ tcg_gen_setcondi_tl(TCG_COND_GE, bcond, t0, 64);
+ MIPS_DEBUG("bposge64 " TARGET_FMT_lx, btgt);
+ goto not_likely;
+#endif
case OPC_BLTZALS:
case OPC_BLTZAL:
ctx->hflags |= (opc == OPC_BLTZALS
@@ -12583,6 +12611,14 @@ static void decode_opc (CPUMIPSState *env, DisasContext *ctx, int *is_branch)
check_insn(env, ctx, ISA_MIPS32R2);
/* Treat as NOP. */
break;
+ case OPC_BPOSGE32: /* MIPS DSP branch */
+#if defined(TARGET_MIPS64)
+ case OPC_BPOSGE64:
+#endif
+ check_dsp(ctx);
+ gen_compute_branch(ctx, op1, 4, -1, -2, (int32_t)imm << 2);
+ *is_branch = 1;
+ break;
default: /* Invalid */
MIPS_INVAL("regimm");
generate_exception(ctx, EXCP_RI);
--
1.7.10.2 (Apple Git-33)
next prev parent reply other threads:[~2012-10-15 16:40 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-15 16:39 [Qemu-devel] [PATCH v11 00/14] QEMU MIPS ASE DSP support Jia Liu
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 01/14] target-mips: Add ASE DSP internal functions Jia Liu
2012-10-16 23:20 ` Aurelien Jarno
2012-10-17 3:39 ` Jia Liu
2012-10-17 15:15 ` Aurelien Jarno
2012-10-18 1:53 ` Jia Liu
2012-10-18 6:05 ` Aurelien Jarno
2012-10-18 11:18 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 02/14] target-mips: Add ASE DSP resources access check Jia Liu
2012-10-16 23:21 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 03/14] target-mips: Use correct acc value to index cpu_HI/cpu_LO rather than using a fix number Jia Liu
2012-10-16 23:21 ` Aurelien Jarno
2012-10-15 16:39 ` Jia Liu [this message]
2012-10-16 23:21 ` [Qemu-devel] [PATCH v11 04/14] target-mips: Add ASE DSP branch instructions Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 05/14] target-mips: Add ASE DSP load instructions Jia Liu
2012-10-16 23:21 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 06/14] target-mips: Add ASE DSP arithmetic instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-17 4:05 ` Jia Liu
2012-10-17 4:54 ` Jia Liu
2012-10-17 6:05 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 07/14] target-mips: Add ASE DSP GPR based shift instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-30 14:47 ` Jia Liu
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 08/14] target-mips: Add ASE DSP multiply instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 09/14] target-mips: Add ASE DSP bit/manipulation instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-17 3:44 ` Jia Liu
2012-10-17 6:05 ` Aurelien Jarno
2012-10-17 7:16 ` Richard Henderson
2012-10-17 20:07 ` Aurelien Jarno
2012-10-18 0:09 ` Jia Liu
2012-10-17 7:41 ` Jia Liu
2012-10-17 15:15 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 10/14] target-mips: Add ASE DSP compare-pick instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 11/14] target-mips: Add ASE DSP accumulator instructions Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 12/14] target-mips: Add ASE DSP processors Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 13/14] target-mips: Add ASE DSP testcases Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
2012-10-15 16:39 ` [Qemu-devel] [PATCH v11 14/14] target-mips: Change TODO file Jia Liu
2012-10-16 23:23 ` Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350319158-7263-5-git-send-email-proljc@gmail.com \
--to=proljc@gmail.com \
--cc=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).