[Qemu-devel] [PULL 0/6] Trivial patches for 13 to 19 October 2012

[Qemu-devel] [PULL 0/6] Trivial patches for 13 to 19 October 2012

[Stefan Hajnoczi]

The following changes since commit b6348f29d033d5a8a26f633d2ee94362595f32a4:

  target-arm/translate: Fix RRX operands (2012-10-17 19:56:46 +0200)

are available in the git repository at:

  git://github.com/stefanha/qemu.git trivial-patches

for you to fetch changes up to 11f66978618b542986172a62fcd6acfa36c0d178:

  ui/vnc-jobs.c: Fix minor typos in comments (2012-10-19 10:42:01 +0200)

----------------------------------------------------------------
Joel Martin (1):
      ui/vnc: Only report/use TIGHT_PNG encoding if enabled.

Peter Maydell (3):
      targphys.h: Don't define target_phys_addr_t for user-mode emulators
      target-arm/neon_helper: Remove obsolete FIXME comment
      ui/vnc-jobs.c: Fix minor typos in comments

Stefan Weil (2):
      configure: Remove unused parameters from main function
      net/tap-win32: Fix compiler warning caused by missing include statement

 configure                |  4 ++--
 net/tap-win32.c          |  1 +
 target-arm/neon_helper.c |  1 -
 targphys.h               |  4 ++++
 ui/vnc-jobs.c            | 16 ++++++++--------
 ui/vnc.c                 |  2 ++
 6 files changed, 17 insertions(+), 11 deletions(-)

-- 
1.7.11.7

[Qemu-devel] [PATCH 1/6] ui/vnc: Only report/use TIGHT_PNG encoding if enabled.

[Stefan Hajnoczi]

From: Joel Martin <github@martintribe.org>

If TIGHT_PNG is not enabled by the --enable-vnc-png configure flag
then do not report to the client that it is supported.

Also, since TIGHT_PNG is the same as the TIGHT encoding but with the
filter/copy replaced with PNG data, adding it to the supported
encodings list when it is disabled will cause the TIGHT encoding to be
used even though the client requested TIGHT_PNG.

Signed-off-by: Joel Martin <github@martintribe.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 ui/vnc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/ui/vnc.c b/ui/vnc.c
index 33e6386..66ae930 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -1806,10 +1806,12 @@ static void set_encodings(VncState *vs, int32_t *encodings, size_t n_encodings)
             vs->features |= VNC_FEATURE_TIGHT_MASK;
             vs->vnc_encoding = enc;
             break;
+#ifdef CONFIG_VNC_PNG
         case VNC_ENCODING_TIGHT_PNG:
             vs->features |= VNC_FEATURE_TIGHT_PNG_MASK;
             vs->vnc_encoding = enc;
             break;
+#endif
         case VNC_ENCODING_ZLIB:
             vs->features |= VNC_FEATURE_ZLIB_MASK;
             vs->vnc_encoding = enc;
-- 
1.7.11.7

[Qemu-devel] [PATCH 2/6] targphys.h: Don't define target_phys_addr_t for user-mode emulators

[Stefan Hajnoczi]

From: Peter Maydell <peter.maydell@linaro.org>

Commit 4be403c accidentally defined the target_phys_addr_t type when
building user-mode emulators. Since the type doesn't really make
any sense except for system emulators, avoid defining it when building
in user mode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 targphys.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/targphys.h b/targphys.h
index 08cade9..50911fd 100644
--- a/targphys.h
+++ b/targphys.h
@@ -3,6 +3,8 @@
 #ifndef TARGPHYS_H
 #define TARGPHYS_H
 
+#ifndef CONFIG_USER_ONLY
+
 #define TARGET_PHYS_ADDR_BITS 64
 /* target_phys_addr_t is the type of a physical address (its size can
    be different from 'target_ulong').  */
@@ -18,3 +20,5 @@ typedef uint64_t target_phys_addr_t;
 #define TARGET_PRIXPHYS PRIX64
 
 #endif
+
+#endif
-- 
1.7.11.7

[Qemu-devel] [PATCH 3/6] target-arm/neon_helper: Remove obsolete FIXME comment

[Stefan Hajnoczi]

From: Peter Maydell <peter.maydell@linaro.org>

Commit 33ebc29 fixed the bugs in the implementation of VQRSHL,
but forgot to remove the FIXME comment...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 target-arm/neon_helper.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/target-arm/neon_helper.c b/target-arm/neon_helper.c
index 8bb5129..9aa920d 100644
--- a/target-arm/neon_helper.c
+++ b/target-arm/neon_helper.c
@@ -788,7 +788,6 @@ uint64_t HELPER(neon_qshlu_s64)(CPUARMState *env, uint64_t valop, uint64_t shift
     return helper_neon_qshl_u64(env, valop, shiftop);
 }
 
-/* FIXME: This is wrong.  */
 #define NEON_FN(dest, src1, src2) do { \
     int8_t tmp; \
     tmp = (int8_t)src2; \
-- 
1.7.11.7

[Qemu-devel] [PATCH 4/6] configure: Remove unused parameters from main function

[Stefan Hajnoczi]

From: Stefan Weil <sw@weilnetz.de>

This modification is required if compiler option -Wunused-parameter is activated.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 configure | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/configure b/configure
index 353d788..499ad81 100755
--- a/configure
+++ b/configure
@@ -1323,7 +1323,7 @@ if test -z "$cross_prefix" ; then
 # big/little endian test
 cat > $TMPC << EOF
 #include <inttypes.h>
-int main(int argc, char ** argv){
+int main(void) {
         volatile uint32_t i=0x01234567;
         return (*((uint8_t*)(&i))) == 0x67;
 }
@@ -2896,7 +2896,7 @@ static int sfaa(int *ptr)
   return __sync_fetch_and_and(ptr, 0);
 }
 
-int main(int argc, char **argv)
+int main(void)
 {
   int val = 42;
   sfaa(&val);
-- 
1.7.11.7

[Qemu-devel] [PATCH 5/6] net/tap-win32: Fix compiler warning caused by missing include statement

[Stefan Hajnoczi]

From: Stefan Weil <sw@weilnetz.de>

The include file for net_init_tap was missing:

net/tap-win32.c:703:
 warning: no previous prototype for ‘net_init_tap’

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 net/tap-win32.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/tap-win32.c b/net/tap-win32.c
index f1801e2..22dad3f 100644
--- a/net/tap-win32.c
+++ b/net/tap-win32.c
@@ -29,6 +29,7 @@
 #include "tap.h"
 
 #include "qemu-common.h"
+#include "clients.h"            /* net_init_tap */
 #include "net.h"
 #include "sysemu.h"
 #include "qemu-error.h"
-- 
1.7.11.7

[Qemu-devel] [PATCH 6/6] ui/vnc-jobs.c: Fix minor typos in comments

[Stefan Hajnoczi]

From: Peter Maydell <peter.maydell@linaro.org>

Fix some minor typos/grammar errors in comments.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 ui/vnc-jobs.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/ui/vnc-jobs.c b/ui/vnc-jobs.c
index 087b84d..3c592b3 100644
--- a/ui/vnc-jobs.c
+++ b/ui/vnc-jobs.c
@@ -33,21 +33,21 @@
 /*
  * Locking:
  *
- * There is three levels of locking:
+ * There are three levels of locking:
  * - jobs queue lock: for each operation on the queue (push, pop, isEmpty?)
  * - VncDisplay global lock: mainly used for framebuffer updates to avoid
  *                      screen corruption if the framebuffer is updated
- *			while the worker is doing something.
+ *                      while the worker is doing something.
  * - VncState::output lock: used to make sure the output buffer is not corrupted
- * 		   	 if two threads try to write on it at the same time
+ *                          if two threads try to write on it at the same time
  *
- * While the VNC worker thread is working, the VncDisplay global lock is hold
- * to avoid screen corruptions (this does not block vnc_refresh() because it
- * uses trylock()) but the output lock is not hold because the thread work on
+ * While the VNC worker thread is working, the VncDisplay global lock is held
+ * to avoid screen corruption (this does not block vnc_refresh() because it
+ * uses trylock()) but the output lock is not held because the thread works on
  * its own output buffer.
  * When the encoding job is done, the worker thread will hold the output lock
  * and copy its output buffer in vs->output.
-*/
+ */
 
 struct VncJobQueue {
     QemuCond cond;
@@ -62,7 +62,7 @@ typedef struct VncJobQueue VncJobQueue;
 
 /*
  * We use a single global queue, but most of the functions are
- * already reetrant, so we can easilly add more than one encoding thread
+ * already reentrant, so we can easily add more than one encoding thread
  */
 static VncJobQueue *queue;
 
-- 
1.7.11.7

Re: [Qemu-devel] [PULL 0/6] Trivial patches for 13 to 19 October 2012

[Aurelien Jarno]

On Fri, Oct 19, 2012 at 10:54:18AM +0200, Stefan Hajnoczi wrote:
> The following changes since commit b6348f29d033d5a8a26f633d2ee94362595f32a4:
> 
>   target-arm/translate: Fix RRX operands (2012-10-17 19:56:46 +0200)
> 
> are available in the git repository at:
> 
>   git://github.com/stefanha/qemu.git trivial-patches
> 
> for you to fetch changes up to 11f66978618b542986172a62fcd6acfa36c0d178:
> 
>   ui/vnc-jobs.c: Fix minor typos in comments (2012-10-19 10:42:01 +0200)
> 
> ----------------------------------------------------------------
> Joel Martin (1):
>       ui/vnc: Only report/use TIGHT_PNG encoding if enabled.
> 
> Peter Maydell (3):
>       targphys.h: Don't define target_phys_addr_t for user-mode emulators
>       target-arm/neon_helper: Remove obsolete FIXME comment
>       ui/vnc-jobs.c: Fix minor typos in comments
> 
> Stefan Weil (2):
>       configure: Remove unused parameters from main function
>       net/tap-win32: Fix compiler warning caused by missing include statement
> 
>  configure                |  4 ++--
>  net/tap-win32.c          |  1 +
>  target-arm/neon_helper.c |  1 -
>  targphys.h               |  4 ++++
>  ui/vnc-jobs.c            | 16 ++++++++--------
>  ui/vnc.c                 |  2 ++
>  6 files changed, 17 insertions(+), 11 deletions(-)
> 

Thanks, pulled.


-- 
Aurelien Jarno                          GPG: 1024D/F1BCDB73
aurelien@aurel32.net                 http://www.aurel32.net

[Qemu-devel] [PULL 1.3 0/9] Trivial patches for 20 October to 1 November 2012

[Stefan Hajnoczi]

The following changes since commit 286d52ebfc0d0d53c2a878e454292fea14bad41b:

  target-mips: don't flush extra TLB on permissions upgrade (2012-10-31 22:20:49 +0100)

are available in the git repository at:

  git://github.com/stefanha/qemu.git trivial-patches

for you to fetch changes up to 0d3cf3b6ff469bba95ae235021a3be232af4068d:

  pc: Drop redundant test for ROM memory region (2012-11-01 19:50:57 +0100)

----------------------------------------------------------------
Blue Swirl (6):
      target-sparc: make do_unaligned_access static
      vl.c: add missing static
      vnc: add missing static
      ppc: add missing static
      target-ppc: make some functions static
      exec: make some functions static

Jan Kiszka (1):
      pc: Drop redundant test for ROM memory region

Meador Inge (1):
      m68k: Return semihosting errno values correctly

Peter Crosthwaite (1):
      cadence_uart: More debug information

 console.h                  |  2 --
 cpu-common.h               |  5 -----
 exec-all.h                 |  2 --
 exec.c                     | 15 +++++++++------
 hw/adb.c                   |  8 ++++----
 hw/adb.h                   |  4 ----
 hw/cadence_uart.c          | 11 +++++++----
 hw/nvram.h                 | 10 +---------
 hw/pc_piix.c               |  2 +-
 hw/ppc.c                   | 16 ++++++++--------
 memory-internal.h          |  2 --
 sysemu.h                   |  5 -----
 target-m68k/m68k-semi.c    |  2 +-
 target-ppc/cpu.h           |  7 -------
 target-ppc/mmu_helper.c    | 11 ++++++-----
 target-sparc/cpu.h         |  3 ---
 target-sparc/ldst_helper.c |  8 ++++++--
 ui/vnc-jobs.c              | 10 +++++-----
 ui/vnc-jobs.h              |  1 -
 ui/vnc.c                   | 14 +++++++-------
 ui/vnc.h                   |  5 -----
 vl.c                       | 21 ++++++++++++---------
 22 files changed, 67 insertions(+), 97 deletions(-)

-- 
1.7.12.1

[Qemu-devel] [PATCH 1/6] ui/vnc: Only report/use TIGHT_PNG encoding if enabled.

[Stefan Hajnoczi]

From: Joel Martin <github@martintribe.org>

If TIGHT_PNG is not enabled by the --enable-vnc-png configure flag
then do not report to the client that it is supported.

Also, since TIGHT_PNG is the same as the TIGHT encoding but with the
filter/copy replaced with PNG data, adding it to the supported
encodings list when it is disabled will cause the TIGHT encoding to be
used even though the client requested TIGHT_PNG.

Signed-off-by: Joel Martin <github@martintribe.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 ui/vnc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/ui/vnc.c b/ui/vnc.c
index 33e6386..66ae930 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -1806,10 +1806,12 @@ static void set_encodings(VncState *vs, int32_t *encodings, size_t n_encodings)
             vs->features |= VNC_FEATURE_TIGHT_MASK;
             vs->vnc_encoding = enc;
             break;
+#ifdef CONFIG_VNC_PNG
         case VNC_ENCODING_TIGHT_PNG:
             vs->features |= VNC_FEATURE_TIGHT_PNG_MASK;
             vs->vnc_encoding = enc;
             break;
+#endif
         case VNC_ENCODING_ZLIB:
             vs->features |= VNC_FEATURE_ZLIB_MASK;
             vs->vnc_encoding = enc;
-- 
1.7.11.7